Subversion Repositories openrisc

/*

 *  This routine starts the application.  It includes application,

 *  board, and monitor specific initialization and configuration.

 *  The generic CPU dependent initialization has been performed

 *  before this routine is invoked.

 *

 *  COPYRIGHT (c) 1989-1999.

 *  On-Line Applications Research Corporation (OAR).

 *

 *  The license and distribution terms for this file may be

 *  found in the file LICENSE in this distribution or at

 *  http://www.OARcorp.com/rtems/license.html.

 *

 *  $Id: bspstart.c,v 1.2 2001-09-27 12:00:09 chris Exp $

 */

#include <bsp.h>

#include <rtems/libio.h>

#include <libcsupport.h>

#include <string.h>

unsigned char *duart_base;

extern struct duart_regs duart_info;

#define DELAY 5000

void led_putnum();

/*

 *  The original table from the application and our copy of it with

 *  some changes.

 */

extern rtems_configuration_table  Configuration;

rtems_configuration_table         BSP_Configuration;

rtems_cpu_table Cpu_table;

char *rtems_progname;

/*

 *  Use the shared implementations of the following routines

 */

void bsp_postdriver_hook(void);

void bsp_libc_init( void *, unsigned32, int );

void bsp_pretasking_hook(void);               /* m68k version */

/*

 *  bsp_start

 *

 *  This routine does the bulk of the system initialization.

 */

void bsp_start( void )

{

  m68k_isr_entry *monitors_vector_table;

  int             index;

  extern void          *_WorkspaceBase;

  extern void          *_RamSize;

  extern unsigned long  _M68k_Ramsize;

  _M68k_Ramsize = (unsigned long)&_RamSize;             /* RAM size set in linker script */

  duart_base = (unsigned char *)DUART_ADDR;

  /*

   *  Set the VBR here to the monitor's default.

   */

  monitors_vector_table = (m68k_isr_entry *)0;

   /* This is where you set vector base register = 0 */

  m68k_set_vbr( monitors_vector_table );

  /* The vector interrupt table for the 680x0 is in appendix B-2

         of the M68000 Family Programmer's reference table */

  for ( index=2 ; index<=255 ; index++ )

    M68Kvec[ index ] = monitors_vector_table[ 32 ];

  M68Kvec[  2 ] = monitors_vector_table[  2 ];   /* bus error vector */

  M68Kvec[  4 ] = monitors_vector_table[  4 ];   /* breakpoints vector */

  M68Kvec[  9 ] = monitors_vector_table[  9 ];   /* trace vector */

  /*

   *  Set the VBR here if you do not want to use the monitor's vector table.

   */

  m68k_set_vbr( &M68Kvec );

  m68k_enable_caching();

  /*

   *  we only use a hook to get the C library initialized.

   */

  Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */

  Cpu_table.postdriver_hook = bsp_postdriver_hook;

  Cpu_table.interrupt_vector_table = (m68k_isr_entry *) &M68Kvec;

  Cpu_table.interrupt_stack_size = CONFIGURE_INTERRUPT_STACK_MEMORY;

  BSP_Configuration.work_space_start = (void *) &_WorkspaceBase;

/*  led_putnum('e'); * for debugging purposes only */

  /* Clock_exit is done as an atexit() function */

}