OpenCores
URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [m68k/] [mvme136/] [clock/] [ckinit.c] - Blame information for rev 773

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 30 unneback 
/*  Clock_init()
2 
 *
3 
 *  This routine initializes the Z80386 1 on the MVME136 board.
4 
 *  The tick frequency is 1 millisecond.
5 
 *
6 
 *  Input parameters:  NONE
7 
 *
8 
 *  Output parameters:  NONE
9 
 *
10 
 *  COPYRIGHT (c) 1989-1999.
11 
 *  On-Line Applications Research Corporation (OAR).
12 
 *
13 
 *  The license and distribution terms for this file may be
14 
 *  found in the file LICENSE in this distribution or at
15 
 *  http://www.OARcorp.com/rtems/license.html.
16 
 *
17 
 *  $Id: ckinit.c,v 1.2 2001-09-27 12:00:13 chris Exp $
18 
 */
19 
 
20 
#include <stdlib.h>
21 
 
22 
#include <bsp.h>
23 
#include <rtems/libio.h>
24 
#include <zilog/z8036.h>
25 
 
26 
#define MICRVAL     0xe2            /* disable lower chain, no vec */
27 
                                    /*  set right justified addr */
28 
                                    /*  and master int enable */
29 
#define MCCRVAL     0xc4            /* enable T1 and port B */
30 
                                    /*   timers independent */
31 
#define MS_COUNT    0x07d0          /* T1's countdown constant (1 ms) */
32 
#define T1MSRVAL    0x80            /* T1 cont. cycle/pulse output */
33 
#define T1CSRVAL    0xc6            /* enable interrupt, allow and */
34 
                                    /*   and trigger countdown */
35 
 
36 
#define TIMER        0xfffb0000
37 
#define RELOAD       0x24            /* clr IP & IUS,allow countdown */
38 
 
39 
#define CLOCK_VECTOR 66
40 
 
41 
rtems_unsigned32 Clock_isrs;        /* ISRs until next tick */
42 
 
43 
volatile rtems_unsigned32 Clock_driver_ticks; /* ticks since initialization */
44 
 
45 
rtems_isr_entry  Old_ticker;
46 
 
47 
void Clock_exit( void );
48 
 
49 
/*
50 
 * These are set by clock driver during its init
51 
 */
52 
 
53 
rtems_device_major_number rtems_clock_major = ~0;
54 
rtems_device_minor_number rtems_clock_minor;
55 
 
56 
/*
57 
 *  ISR Handler
58 
 */
59 
 
60 
rtems_isr Clock_isr(
61 
  rtems_vector_number vector
62 
)
63 
{
64 
  Clock_driver_ticks += 1;
65 
  ((volatile struct z8036_map *) TIMER)->CT1_CMD_STATUS = RELOAD;
66 
 
67 
  if ( Clock_isrs == 1 ) {
68 
    rtems_clock_tick();
69 
    Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000;
70 
  }
71 
  else
72 
    Clock_isrs -= 1;
73 
}
74 
 
75 
void Install_clock(
76 
  rtems_isr_entry clock_isr
77 
)
78 
{
79 
  volatile struct z8036_map *timer;
80 
 
81 
  Clock_driver_ticks = 0;
82 
  Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000;
83 
 
84 
  Old_ticker = (rtems_isr_entry) set_vector( clock_isr, CLOCK_VECTOR, 1 );
85 
  timer = (struct z8036_map *) 0xfffb0000;
86 
  timer->MASTER_INTR        = MICRVAL;
87 
  timer->CT1_MODE_SPEC      = T1MSRVAL;
88 
 
89 
  *((rtems_unsigned16 *)0xfffb0016) = MS_COUNT;  /* write countdown value */
90 
 
91 
  /*
92 
   *  timer->CT1_TIME_CONST_MSB = (MS_COUNT >> 8);
93 
   *  timer->CT1_TIME_CONST_LSB = (MS_COUNT &  0xff);
94 
   */
95 
 
96 
  timer->MASTER_CFG         = MCCRVAL;
97 
  timer->CT1_CMD_STATUS     = T1CSRVAL;
98 
 
99 
  /*
100 
   * Enable interrupt via VME interrupt mask register
101 
   */
102 
  (*(rtems_unsigned8 *)0xfffb0038) &= 0xfd;
103 
 
104 
  atexit( Clock_exit );
105 
}
106 
 
107 
void Clock_exit( void )
108 
{
109 
  volatile struct z8036_map *timer;
110 
 
111 
  timer = (struct z8036_map *) 0xfffb0000;
112 
  timer->MASTER_INTR        = 0x62;
113 
  timer->CT1_MODE_SPEC      = 0x00;
114 
  timer->MASTER_CFG         = 0xf4;
115 
  timer->CT1_CMD_STATUS     = 0x00;
116 
  /* do not restore old vector */
117 
}
118 
 
119 
rtems_device_driver Clock_initialize(
120 
  rtems_device_major_number major,
121 
  rtems_device_minor_number minor,
122 
  void *pargp
123 
)
124 
{
125 
  Install_clock( Clock_isr );
126 
 
127 
  /*
128 
   * make major/minor avail to others such as shared memory driver
129 
   */
130 
 
131 
  rtems_clock_major = major;
132 
  rtems_clock_minor = minor;
133 
 
134 
  return RTEMS_SUCCESSFUL;
135 
}
136 
 
137 
rtems_device_driver Clock_control(
138 
  rtems_device_major_number major,
139 
  rtems_device_minor_number minor,
140 
  void *pargp
141 
)
142 
{
143 
    rtems_unsigned32 isrlevel;
144 
    rtems_libio_ioctl_args_t *args = pargp;
145 
 
146 
    if (args == 0)
147 
        goto done;
148 
 
149 
    /*
150 
     * This is hokey, but until we get a defined interface
151 
     * to do this, it will just be this simple...
152 
     */
153 
 
154 
    if (args->command == rtems_build_name('I', 'S', 'R', ' '))
155 
    {
156 
        Clock_isr(CLOCK_VECTOR);
157 
    }
158 
    else if (args->command == rtems_build_name('N', 'E', 'W', ' '))
159 
    {
160 
      rtems_interrupt_disable( isrlevel );
161 
       (void) set_vector( args->buffer, CLOCK_VECTOR, 1 );
162 
      rtems_interrupt_enable( isrlevel );
163 
    }
164 
 
165 
done:
166 
    return RTEMS_SUCCESSFUL;
167 
}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.