Subversion Repositories openrisc_2011-10-31

/*  bsp.h

 *

 *  This include file contains all MVME147 board IO definitions.

 *

 *  COPYRIGHT (c) 1989-1999.

 *  On-Line Applications Research Corporation (OAR).

 *

 *  The license and distribution terms for this file may be

 *  found in the file LICENSE in this distribution or at

 *  http://www.OARcorp.com/rtems/license.html.

 *

 *  MVME147 port for TNI - Telecom Bretagne

 *  by Dominique LE CAMPION (Dominique.LECAMPION@enst-bretagne.fr)

 *  May 1996

 *

 *  $Id: bsp.h,v 1.2 2001-09-27 12:00:16 chris Exp $

 */

#ifndef __MVME147_h

#define __MVME147_h

#ifdef __cplusplus

extern "C" {

#endif

#include <rtems.h>

#include <clockdrv.h>

#include <console.h>

#include <iosupp.h>

/*

 *  confdefs.h overrides for this BSP:

 *   - number of termios serial ports (defaults to 1)

 *   - Interrupt stack space is not minimum if defined.

 */

/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */

#define CONFIGURE_INTERRUPT_STACK_MEMORY  (4 * 1024)

/* Constants */

#define RAM_START 0x00005000

#define RAM_END   0x00400000

  /* MVME 147 Peripheral controller chip

     see MVME147/D1, 3.4 */

struct pcc_map {

  /* 32 bit registers */

  rtems_unsigned32 dma_table_address;            /* 0xfffe1000 */

  rtems_unsigned32 dma_data_address;             /* 0xfffe1004 */

  rtems_unsigned32 dma_bytecount;                /* 0xfffe1008 */

  rtems_unsigned32 dma_data_holding;             /* 0xfffe100c */

  /* 16 bit registers */

  rtems_unsigned16 timer1_preload;               /* 0xfffe1010 */

  rtems_unsigned16 timer1_count;                 /* 0xfffe1012 */

  rtems_unsigned16 timer2_preload;               /* 0xfffe1014 */

  rtems_unsigned16 timer2_count;                 /* 0xfffe1016 */

  /* 8 bit registers */

  rtems_unsigned8 timer1_int_control;            /* 0xfffe1018 */

  rtems_unsigned8 timer1_control;                /* 0xfffe1019 */

  rtems_unsigned8 timer2_int_control;            /* 0xfffe101a */

  rtems_unsigned8 timer2_control;                /* 0xfffe101b */

  rtems_unsigned8 acfail_int_control;            /* 0xfffe101c */

  rtems_unsigned8 watchdog_control;              /* 0xfffe101d */

  rtems_unsigned8 printer_int_control;           /* 0xfffe101e */

  rtems_unsigned8 printer_control;               /* 0xfffe102f */

  rtems_unsigned8 dma_int_control;               /* 0xfffe1020 */

  rtems_unsigned8 dma_control;                   /* 0xfffe1021 */

  rtems_unsigned8 bus_error_int_control;         /* 0xfffe1022 */

  rtems_unsigned8 dma_status;                    /* 0xfffe1023 */

  rtems_unsigned8 abort_int_control;             /* 0xfffe1024 */

  rtems_unsigned8 table_address_function_code;   /* 0xfffe1025 */

  rtems_unsigned8 serial_port_int_control;       /* 0xfffe1026 */

  rtems_unsigned8 general_purpose_control;       /* 0xfffe1027 */

  rtems_unsigned8 lan_int_control;               /* 0xfffe1028 */

  rtems_unsigned8 general_purpose_status;        /* 0xfffe1029 */

  rtems_unsigned8 scsi_port_int_control;         /* 0xfffe102a */

  rtems_unsigned8 slave_base_address;            /* 0xfffe102b */

  rtems_unsigned8 software_int_1_control;        /* 0xfffe102c */

  rtems_unsigned8 int_base_vector;               /* 0xfffe102d */

  rtems_unsigned8 software_int_2_control;        /* 0xfffe102e */

  rtems_unsigned8 revision_level;                /* 0xfffe102f */

};

#define pcc      ((volatile struct pcc_map * const) 0xfffe1000)

#define z8530 0xfffe3001

/* interrupt vectors - see MVME146/D1 4.14 */

#define PCC_BASE_VECTOR        0x40 /* First user int */

#define SCC_VECTOR             PCC_BASE_VECTOR+3

#define TIMER_1_VECTOR         PCC_BASE_VECTOR+8

#define TIMER_2_VECTOR         PCC_BASE_VECTOR+9  

#define SOFT_1_VECTOR          PCC_BASE_VECTOR+10

#define SOFT_2_VECTOR          PCC_BASE_VECTOR+11 

#define USE_CHANNEL_A   1                /* 1 = use channel A for console */

#define USE_CHANNEL_B   0                /* 1 = use channel B for console */

#if (USE_CHANNEL_A == 1)

#define CONSOLE_CONTROL  0xfffe3002

#define CONSOLE_DATA     0xfffe3003

#elif (USE_CHANNEL_B == 1)

#define CONSOLE_CONTROL  0xfffe3000

#define CONSOLE_DATA     0xfffe3001

#endif

#define FOREVER       1                  /* infinite loop */

#ifdef M147_INIT

#undef EXTERN

#define EXTERN

#else

#undef EXTERN

#define EXTERN extern

#endif

/*

 *  Define the time limits for RTEMS Test Suite test durations.

 *  Long test and short test duration limits are provided.  These

 *  values are in seconds and need to be converted to ticks for the

 *  application.

 *

 */

#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */

#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */

/*

 *  Define the interrupt mechanism for Time Test 27

 *

 *  NOTE: Use the MPCSR vector for the MVME147

 */

#define MUST_WAIT_FOR_INTERRUPT 0

#define Install_tm27_vector( handler ) set_vector( (handler), \

                                                   SOFT_1_VECTOR, 1 )

#define Cause_tm27_intr()  pcc->software_int_1_control = 0x0c

  /* generate level 4 sotware int. */

#define Clear_tm27_intr()  pcc->software_int_1_control = 0x00

#define Lower_tm27_intr()

/* miscellaneous stuff assumed to exist */

extern rtems_configuration_table BSP_Configuration;

extern m68k_isr_entry M68Kvec[];   /* vector table address */

/*

 *  Device Driver Table Entries

 */

/*

 * NOTE: Use the standard Console driver entry

 */

/*

 * NOTE: Use the standard Clock driver entry

 */

/* functions */

void bsp_cleanup( void );

m68k_isr_entry set_vector(

  rtems_isr_entry     handler,

  rtems_vector_number vector,

  int                 type

);

#ifdef __cplusplus

}

#endif

#endif

/* end of include file */