1 |
30 |
unneback |
/* bsp.h
|
2 |
|
|
*
|
3 |
|
|
* Following defines must reflect the setup of the particular MVME167.
|
4 |
|
|
* All page references are to the MVME166/MVME167/MVME187 Single Board
|
5 |
|
|
* Computer Programmer's Reference Guide (MVME187PG/D2) with the April
|
6 |
|
|
* 1993 supplements/addenda (MVME187PG/D2A1).
|
7 |
|
|
*
|
8 |
|
|
* COPYRIGHT (c) 1989-1999.
|
9 |
|
|
* On-Line Applications Research Corporation (OAR).
|
10 |
|
|
*
|
11 |
|
|
* The license and distribution terms for this file may be
|
12 |
|
|
* found in the file LICENSE in this distribution or at
|
13 |
|
|
* http://www.OARcorp.com/rtems/license.html.
|
14 |
|
|
*
|
15 |
|
|
* Modifications of respective RTEMS file:
|
16 |
|
|
* Copyright (c) 1998, National Research Council of Canada
|
17 |
|
|
*
|
18 |
|
|
* $Id: bsp.h,v 1.2 2001-09-27 12:00:19 chris Exp $
|
19 |
|
|
*/
|
20 |
|
|
|
21 |
|
|
#ifndef __MVME167_H
|
22 |
|
|
#define __MVME167_H
|
23 |
|
|
|
24 |
|
|
|
25 |
|
|
#ifdef __cplusplus
|
26 |
|
|
extern "C" {
|
27 |
|
|
#endif
|
28 |
|
|
|
29 |
|
|
#include <rtems.h>
|
30 |
|
|
#include <clockdrv.h>
|
31 |
|
|
#include <console.h>
|
32 |
|
|
#include <iosupp.h>
|
33 |
|
|
|
34 |
|
|
|
35 |
|
|
/*
|
36 |
|
|
* confdefs.h overrides for this BSP:
|
37 |
|
|
* - termios serial ports (defaults to 1)
|
38 |
|
|
* - Interrupt stack space is not minimum if defined.
|
39 |
|
|
*/
|
40 |
|
|
|
41 |
|
|
#define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 4
|
42 |
|
|
#define CONFIGURE_INTERRUPT_STACK_MEMORY (4 * 1024)
|
43 |
|
|
|
44 |
|
|
/*
|
45 |
|
|
* Network driver configuration
|
46 |
|
|
*/
|
47 |
|
|
|
48 |
|
|
struct rtems_bsdnet_ifconfig;
|
49 |
|
|
extern int uti596_attach(struct rtems_bsdnet_ifconfig * pConfig );
|
50 |
|
|
#define RTEMS_BSP_NETWORK_DRIVER_NAME "uti1"
|
51 |
|
|
#define RTEMS_BSP_NETWORK_DRIVER_ATTACH uti596_attach
|
52 |
|
|
|
53 |
|
|
/*
|
54 |
|
|
* This is NOT the base address of local RAM!
|
55 |
|
|
* This is the base local address of the VMEbus short I/O space. A local
|
56 |
|
|
* access to this space results in a A16 VMEbus I/O cycle. This base address
|
57 |
|
|
* is NOT configurable on the MVME167, although the types of VMEbus short I/O
|
58 |
|
|
* cycles generated when a cycle in the local 0xFFFF0000-0xFFFFFFFF address
|
59 |
|
|
* range is generated is under control of bits 8-15 of LCSR 0xFFF4002C. The
|
60 |
|
|
* GCSRs of other boards are accessible only through the VMEbus short I/O
|
61 |
|
|
* space. See pages 2-45 and 2-7.
|
62 |
|
|
*/
|
63 |
|
|
#define BOARD_BASE_ADDRESS 0xFFFF0000
|
64 |
|
|
|
65 |
|
|
|
66 |
|
|
/*
|
67 |
|
|
* This address must be added to the BOARD_BASE_ADDRESS to access the GCSR of
|
68 |
|
|
* other MVMEs in the group, i.e. it represents the offset of the GCSRs in the
|
69 |
|
|
* VMEbus short I/O space. It also should represent the group address of this
|
70 |
|
|
* MVME167! The group address is configurable, and must match the address
|
71 |
|
|
* programmed into the MVME167 through the 167Bug monitor. 0xCC is the address
|
72 |
|
|
* recommended by Motorola. It is arbitrary.
|
73 |
|
|
* See pages 2-42 and 2-97 to 2-104.
|
74 |
|
|
*/
|
75 |
|
|
#define GROUP_BASE_ADDRESS 0x0000CC00
|
76 |
|
|
|
77 |
|
|
|
78 |
|
|
/*
|
79 |
|
|
* Representation of the GCSR
|
80 |
|
|
*/
|
81 |
|
|
typedef volatile struct gcsr_regs_ {
|
82 |
|
|
unsigned char chip_revision;
|
83 |
|
|
unsigned char chip_id;
|
84 |
|
|
unsigned char lmsig;
|
85 |
|
|
unsigned char board_scr;
|
86 |
|
|
unsigned short gpr[6];
|
87 |
|
|
} gcsr_regs;
|
88 |
|
|
|
89 |
|
|
/* Address of GCSR in VMEbus space */
|
90 |
|
|
#define gcsr_vme ((gcsr_regs * const) (GROUP_BASE_ADDRESS + BOARD_BASE_ADDRESS))
|
91 |
|
|
|
92 |
|
|
/* Address of GCSR in local space */
|
93 |
|
|
#define gcsr ((gcsr_regs * const) 0xFFF40100)
|
94 |
|
|
|
95 |
|
|
/*
|
96 |
|
|
* Representation of the VMEchip2 LCSR.
|
97 |
|
|
* Could be made more detailed.
|
98 |
|
|
*/
|
99 |
|
|
typedef volatile struct lcsr_regs_ {
|
100 |
|
|
unsigned long slave_adr[2]; /* 0xFFF40000 */
|
101 |
|
|
unsigned long slave_trn[2]; /* 0xFFF40008 */
|
102 |
|
|
unsigned long slave_ctl; /* 0xFFF40010 */
|
103 |
|
|
unsigned long mastr_adr[4]; /* 0xFFF40014 */
|
104 |
|
|
unsigned long mastr_trn; /* 0xFFF40024 */
|
105 |
|
|
unsigned long mastr_att; /* 0xFFF40028 */
|
106 |
|
|
unsigned long mastr_ctl; /* 0xFFF4002C */
|
107 |
|
|
unsigned long dma_ctl_1; /* 0xFFF40030 */
|
108 |
|
|
unsigned long dma_ctl_2; /* 0xFFF40034 */
|
109 |
|
|
unsigned long dma_loc_cnt; /* 0xFFF40038 */
|
110 |
|
|
unsigned long dma_vme_cnt; /* 0xFFF4003C */
|
111 |
|
|
unsigned long dma_byte_cnt; /* 0xFFF40040 */
|
112 |
|
|
unsigned long dma_adr_cnt; /* 0xFFF40044 */
|
113 |
|
|
unsigned long dma_status; /* 0xFFF40048 */
|
114 |
|
|
unsigned long to_ctl; /* 0xFFF4004C */
|
115 |
|
|
unsigned long timer_cmp_1; /* 0xFFF40050 */
|
116 |
|
|
unsigned long timer_cnt_1; /* 0xFFF40054 */
|
117 |
|
|
unsigned long timer_cmp_2; /* 0xFFF40058 */
|
118 |
|
|
unsigned long timer_cnt_2; /* 0xFFF4005C */
|
119 |
|
|
unsigned long board_ctl; /* 0xFFF40060 */
|
120 |
|
|
unsigned long prescaler_cnt; /* 0xFFF40064 */
|
121 |
|
|
unsigned long intr_stat; /* 0xFFF40068 */
|
122 |
|
|
unsigned long intr_ena; /* 0xFFF4006C */
|
123 |
|
|
unsigned long intr_soft_set; /* 0xFFF40070 */
|
124 |
|
|
unsigned long intr_clear; /* 0xFFF40074 */
|
125 |
|
|
unsigned long intr_level[4]; /* 0xFFF40078 */
|
126 |
|
|
unsigned long vector_base; /* 0xFFF40088 */
|
127 |
|
|
} lcsr_regs;
|
128 |
|
|
|
129 |
|
|
/*
|
130 |
|
|
* Base address of VMEchip2 LCSR
|
131 |
|
|
* Not configurable on the MVME167.
|
132 |
|
|
*/
|
133 |
|
|
#define lcsr ((lcsr_regs * const) 0xFFF40000)
|
134 |
|
|
|
135 |
|
|
/*
|
136 |
|
|
* Vector numbers for the interrupts from the VMEchip2. Use the values
|
137 |
|
|
* "recommended" by Motorola.
|
138 |
|
|
* See pages 2-70 to 2-92, and table 2-3.
|
139 |
|
|
*/
|
140 |
|
|
|
141 |
|
|
/* MIEN (Master Interrupt Enable) bit in LCSR 0xFFF40088. */
|
142 |
|
|
#define MASK_INT 0x00800000
|
143 |
|
|
|
144 |
|
|
/* The content of VBR0 corresponds to "X" in table 2-3 */
|
145 |
|
|
#define VBR0 0x6
|
146 |
|
|
|
147 |
|
|
/* The content of VBR1 corresponds to "Y" in table 2-3 */
|
148 |
|
|
#define VBR1 0x7
|
149 |
|
|
|
150 |
|
|
|
151 |
|
|
/*
|
152 |
|
|
* Representation of the PCCchip2
|
153 |
|
|
*/
|
154 |
|
|
typedef volatile struct pccchip2_regs_ {
|
155 |
|
|
unsigned char chip_id; /* 0xFFF42000 */
|
156 |
|
|
unsigned char chip_revision; /* 0xFFF42001 */
|
157 |
|
|
unsigned char gen_control; /* 0xFFF42002 */
|
158 |
|
|
unsigned char vector_base; /* 0xFFF42003 */
|
159 |
|
|
unsigned long timer_cmp_1; /* 0xFFF42004 */
|
160 |
|
|
unsigned long timer_cnt_1; /* 0xFFF42008 */
|
161 |
|
|
unsigned long timer_cmp_2; /* 0xFFF4200C */
|
162 |
|
|
unsigned long timer_cnt_2; /* 0xFFF42010 */
|
163 |
|
|
unsigned char LSB_prescaler_count;/* 0xFFF42014 */
|
164 |
|
|
unsigned char prescaler_clock_adjust; /* 0xFFF42015 */
|
165 |
|
|
unsigned char timer_ctl_2; /* 0xFFF42016 */
|
166 |
|
|
unsigned char timer_ctl_1; /* 0xFFF42017 */
|
167 |
|
|
unsigned char gpi_int_ctl; /* 0xFFF42018 */
|
168 |
|
|
unsigned char gpio_ctl; /* 0xFFF42019 */
|
169 |
|
|
unsigned char timer_int_ctl_2; /* 0xFFF4201A */
|
170 |
|
|
unsigned char timer_int_ctl_1; /* 0xFFF4201B */
|
171 |
|
|
unsigned char SCC_error; /* 0xFFF4201C */
|
172 |
|
|
unsigned char SCC_modem_int_ctl; /* 0xFFF4201D */
|
173 |
|
|
unsigned char SCC_tx_int_ctl; /* 0xFFF4201E */
|
174 |
|
|
unsigned char SCC_rx_int_ctl; /* 0xFFF4201F */
|
175 |
|
|
unsigned char reserved1[3];
|
176 |
|
|
unsigned char modem_piack; /* 0xFFF42023 */
|
177 |
|
|
unsigned char reserved2;
|
178 |
|
|
unsigned char tx_piack; /* 0xFFF42025 */
|
179 |
|
|
unsigned char reserved3;
|
180 |
|
|
unsigned char rx_piack; /* 0xFFF42027 */
|
181 |
|
|
unsigned char LANC_error; /* 0xFFF42028 */
|
182 |
|
|
unsigned char reserved4;
|
183 |
|
|
unsigned char LANC_int_ctl; /* 0xFFF4202A */
|
184 |
|
|
unsigned char LANC_berr_ctl; /* 0xFFF4202B */
|
185 |
|
|
unsigned char SCSI_error; /* 0xFFF4202C */
|
186 |
|
|
unsigned char reserved5[2];
|
187 |
|
|
unsigned char SCSI_int_ctl; /* 0xFFF4202F */
|
188 |
|
|
unsigned char print_ack_int_ctl; /* 0xFFF42030 */
|
189 |
|
|
unsigned char print_fault_int_ctl;/* 0xFFF42031 */
|
190 |
|
|
unsigned char print_sel_int_ctl; /* 0xFFF42032 */
|
191 |
|
|
unsigned char print_pe_int_ctl; /* 0xFFF42033 */
|
192 |
|
|
unsigned char print_busy_int_ctl; /* 0xFFF42034 */
|
193 |
|
|
unsigned char reserved6;
|
194 |
|
|
unsigned char print_input_status; /* 0xFFF42036 */
|
195 |
|
|
unsigned char print_ctl; /* 0xFFF42037 */
|
196 |
|
|
unsigned char chip_speed; /* 0xFFF42038 */
|
197 |
|
|
unsigned char reserved7;
|
198 |
|
|
unsigned char print_data; /* 0xFFF4203A */
|
199 |
|
|
unsigned char reserved8[3];
|
200 |
|
|
unsigned char int_level; /* 0xFFF4203E */
|
201 |
|
|
unsigned char int_mask; /* 0xFFF4203F */
|
202 |
|
|
} pccchip2_regs;
|
203 |
|
|
|
204 |
|
|
/*
|
205 |
|
|
* Base address of the PCCchip2.
|
206 |
|
|
* This is not configurable in the MVME167.
|
207 |
|
|
*/
|
208 |
|
|
#define pccchip2 ((pccchip2_regs * const) 0xFFF42000)
|
209 |
|
|
|
210 |
|
|
/*
|
211 |
|
|
* Vector numbers for the interrupts from the PCCchip2. Use the values
|
212 |
|
|
* "recommended" by Motorola.
|
213 |
|
|
* See page 3-15.
|
214 |
|
|
*/
|
215 |
|
|
#define PCCCHIP2_VBR 0x5
|
216 |
|
|
|
217 |
|
|
|
218 |
|
|
/*
|
219 |
|
|
* The MVME167 is equiped with one or two MEMC040 memory controllers at
|
220 |
|
|
* 0xFFF43000 and 0xFFF43100. This port assumes that the controllers
|
221 |
|
|
* were initialized by 167Bug.
|
222 |
|
|
*/
|
223 |
|
|
typedef volatile struct memc040_regs_ {
|
224 |
|
|
unsigned char chip_id; /* 0xFFF43000/0xFFF43100 */
|
225 |
|
|
unsigned char reserved1[3];
|
226 |
|
|
unsigned char chip_revision; /* 0xFFF43004/0xFFF43104 */
|
227 |
|
|
unsigned char reserved2[3];
|
228 |
|
|
unsigned char mem_config; /* 0xFFF43008/0xFFF43108 */
|
229 |
|
|
unsigned char reserved3[3];
|
230 |
|
|
unsigned char alt_status; /* 0xFFF4300C/0xFFF4310C */
|
231 |
|
|
unsigned char reserved4[3];
|
232 |
|
|
unsigned char alt_ctl; /* 0xFFF43010/0xFFF43110 */
|
233 |
|
|
unsigned char reserved5[3];
|
234 |
|
|
unsigned char base_addr; /* 0xFFF43014/0xFFF43114 */
|
235 |
|
|
unsigned char reserved6[3];
|
236 |
|
|
unsigned char ram_ctl; /* 0xFFF43018/0xFFF43118 */
|
237 |
|
|
unsigned char reserved7[3];
|
238 |
|
|
unsigned char bus_clk; /* 0xFFF4301C/0xFFF4311C */
|
239 |
|
|
} memc040_regs;
|
240 |
|
|
|
241 |
|
|
/*
|
242 |
|
|
* Base address of the MEMC040s.
|
243 |
|
|
* This is not configurable in the MVME167.
|
244 |
|
|
*/
|
245 |
|
|
#define memc040_1 ((memc040_regs * const) 0xFFF43000)
|
246 |
|
|
#define memc040_2 ((memc040_regs * const) 0xFFF43100)
|
247 |
|
|
|
248 |
|
|
|
249 |
|
|
/*
|
250 |
|
|
* The MVME167 may be equiped with error-correcting RAM cards. In this case,
|
251 |
|
|
* each MEMC040 is replaced by two MCECC ECC DRAM controllers. This port
|
252 |
|
|
* assumes that these controllers, if present, are initialized by 167Bug.
|
253 |
|
|
* They do not appear to hold information of interest at this time, so they
|
254 |
|
|
* are not described. However, each MCECC pair lives at the same address as
|
255 |
|
|
* the MEMC040 is replaces. The first eight registers of the MCECC are
|
256 |
|
|
* nearly identical to the ones of the MEMC040, and the memc040_X structures
|
257 |
|
|
* can be used to read those first eight registers.
|
258 |
|
|
*/
|
259 |
|
|
|
260 |
|
|
|
261 |
|
|
/*
|
262 |
|
|
* Representation of the Cirrus Logic CL-CD2401 Multi-Protocol Controller
|
263 |
|
|
*/
|
264 |
|
|
typedef volatile struct cd2401_regs_ {
|
265 |
|
|
unsigned char reserved1[7];
|
266 |
|
|
unsigned char cor7; /* 0xFFF45007 - Channel Option 7 */
|
267 |
|
|
unsigned char reserved2;
|
268 |
|
|
unsigned char livr; /* 0xFFF45009 - Local Interrupt Vector */
|
269 |
|
|
unsigned char reserved3[6];
|
270 |
|
|
unsigned char cor1; /* 0xFFF45010 - Channel Option 1 */
|
271 |
|
|
unsigned char ier; /* 0xFFF45011 - Interrupt Enable */
|
272 |
|
|
unsigned char stcr; /* 0xFFF45012 - Special Transmit Command */
|
273 |
|
|
unsigned char ccr; /* 0xFFF45013 - Channel Command */
|
274 |
|
|
unsigned char cor5; /* 0xFFF45014 - Channel Option 5 */
|
275 |
|
|
unsigned char cor4; /* 0xFFF45015 - Channel Option 4 */
|
276 |
|
|
unsigned char cor3; /* 0xFFF45016 - Channel Option 3 */
|
277 |
|
|
unsigned char cor2; /* 0xFFF45017 - Channel Option 2 */
|
278 |
|
|
unsigned char cor6; /* 0xFFF45018 - Channel Option 6 */
|
279 |
|
|
unsigned char dmabsts; /* 0xFFF45019 - DMA Buffer Status */
|
280 |
|
|
unsigned char csr; /* 0xFFF4501A - Channel Status */
|
281 |
|
|
unsigned char cmr; /* 0xFFF4501B - Channel Mode */
|
282 |
|
|
union {
|
283 |
|
|
struct {
|
284 |
|
|
unsigned char schr4; /* 0xFFF4501C - Special Character 4 */
|
285 |
|
|
unsigned char schr3; /* 0xFFF4501D - Special Character 3 */
|
286 |
|
|
unsigned char schr2; /* 0xFFF4501E - Special Character 2 */
|
287 |
|
|
unsigned char schr1; /* 0xFFF4501F - Special Character 1 */
|
288 |
|
|
} async;
|
289 |
|
|
struct {
|
290 |
|
|
unsigned char rfar4; /* 0xFFF4501C - Receive Frame Address 4 */
|
291 |
|
|
unsigned char rfar3; /* 0xFFF4501D - Receive Frame Address 3 */
|
292 |
|
|
unsigned char rfar2; /* 0xFFF4501E - Receive Frame Address 2 */
|
293 |
|
|
unsigned char rfar1; /* 0xFFF4501F - Receive Frame Address 1 */
|
294 |
|
|
} sync;
|
295 |
|
|
} u1;
|
296 |
|
|
unsigned char reserved4[2];
|
297 |
|
|
unsigned char scrh; /* 0xFFF45022 - Special Character Range High */
|
298 |
|
|
unsigned char scrl; /* 0xFFF45023 - Special Character Range Low */
|
299 |
|
|
union {
|
300 |
|
|
struct {
|
301 |
|
|
unsigned short rtpr; /* 0xFFF45024 - Receive Timeout Period */
|
302 |
|
|
} w;
|
303 |
|
|
struct {
|
304 |
|
|
unsigned char rtprh; /* 0xFFF45024 - Receive Timeout Period High */
|
305 |
|
|
unsigned char rtprl; /* 0xFFF45025 - Receive Timeout Period Low */
|
306 |
|
|
} b;
|
307 |
|
|
} u2;
|
308 |
|
|
unsigned char licr; /* 0xFFF45026 - Local Interrupt Channel */
|
309 |
|
|
unsigned char reserved5[2];
|
310 |
|
|
union {
|
311 |
|
|
struct {
|
312 |
|
|
unsigned char ttr; /* 0xFFF45029 - Transmit Timer */
|
313 |
|
|
} async;
|
314 |
|
|
struct {
|
315 |
|
|
unsigned char gt2; /* 0xFFF45029 - General Timer 2 */
|
316 |
|
|
} sync;
|
317 |
|
|
} u3;
|
318 |
|
|
union {
|
319 |
|
|
struct {
|
320 |
|
|
unsigned short gt1; /* 0xFFF4502A - General Timer 1 */
|
321 |
|
|
} w;
|
322 |
|
|
struct {
|
323 |
|
|
unsigned char gt1h; /* 0xFFF4502A - General Timer 2 High */
|
324 |
|
|
unsigned char gt1l; /* 0xFFF4502B - General Timer 1 Low */
|
325 |
|
|
} b;
|
326 |
|
|
} u4;
|
327 |
|
|
unsigned char reserved6[2];
|
328 |
|
|
unsigned char lnxt; /* 0xFF4502E - LNext Character */
|
329 |
|
|
unsigned char reserved7;
|
330 |
|
|
unsigned char rfoc; /* 0xFFF45030 - Receive FIFO Output Count */
|
331 |
|
|
unsigned char reserved8[7];
|
332 |
|
|
unsigned short tcbadru; /* 0xFF45038 - Transmit Current Buffer Address Upper */
|
333 |
|
|
unsigned short tcbadrl; /* 0xFF4503A - Transmit Current Buffer Address Lower */
|
334 |
|
|
unsigned short rcbadru; /* 0xFF4503C - Receive Current Buffer Address Upper */
|
335 |
|
|
unsigned short rcbadrl; /* 0xFF4503E - Receive Current Buffer Address Lower */
|
336 |
|
|
unsigned short arbadru; /* 0xFF45040 - A Receive Buffer Address Upper */
|
337 |
|
|
unsigned short arbardl; /* 0xFF45042 - A Receive Buffer Address Lower */
|
338 |
|
|
unsigned short brbadru; /* 0xFF45044 - B Receive Buffer Address Upper */
|
339 |
|
|
unsigned short brbadrl; /* 0xFF45046 - B Receive Buffer Address Lower */
|
340 |
|
|
unsigned short brbcnt; /* 0xFF45048 - B Receive Buffer Byte Count */
|
341 |
|
|
unsigned short arbcnt; /* 0xFF4504A - A Receive Buffer Byte Count */
|
342 |
|
|
unsigned short reserved9;
|
343 |
|
|
unsigned char brbsts; /* 0xFF4504E - B Receive Buffer Status */
|
344 |
|
|
unsigned char arbsts; /* 0xFF4504F - A Receive Buffer Status */
|
345 |
|
|
unsigned short atbadru; /* 0xFF45050 - A Transmit Buffer Address Upper */
|
346 |
|
|
unsigned short atbadrl; /* 0xFF45052 - A Transmit Buffer Address Lower */
|
347 |
|
|
unsigned short btbadru; /* 0xFF45054 - B Transmit Buffer Address Upper */
|
348 |
|
|
unsigned short btbadrl; /* 0xFF45056 - B Transmit Buffer Address Lower */
|
349 |
|
|
unsigned short btbcnt; /* 0xFF45058 - B Transmit Buffer Byte Count */
|
350 |
|
|
unsigned short atbcnt; /* 0xFF4505A - A Transmit Buffer Byte Count */
|
351 |
|
|
unsigned short reserved10;
|
352 |
|
|
unsigned char btbsts; /* 0xFF4505E - B Transmit Buffer Status */
|
353 |
|
|
unsigned char atbsts; /* 0xFF4505F - A Transmit Buffer Status */
|
354 |
|
|
unsigned char reserved11[32];
|
355 |
|
|
unsigned char tftc; /* 0xFFF45080 - Transmit FIFO Transfer Count */
|
356 |
|
|
unsigned char gfrcr; /* 0xFFF45081 - Global Firmware Revision Code */
|
357 |
|
|
unsigned char reserved12[2];
|
358 |
|
|
unsigned char reoir; /* 0xFFF45084 - Receive End Of Interrupt */
|
359 |
|
|
unsigned char teoir; /* 0xFFF45085 - Transmit End Of Interrupt */
|
360 |
|
|
unsigned char meoir; /* 0xFFF45086 - Modem End Of Interrupt */
|
361 |
|
|
union {
|
362 |
|
|
struct {
|
363 |
|
|
unsigned short risr; /* 0xFFF45088 - Receive Interrupt Status */
|
364 |
|
|
} w;
|
365 |
|
|
struct {
|
366 |
|
|
unsigned char risrh; /* 0xFFF45088 - Receive Interrupt Status High */
|
367 |
|
|
unsigned char risrl; /* 0xFFF45089 - Receive Interrupt Status Low */
|
368 |
|
|
} b;
|
369 |
|
|
} u5;
|
370 |
|
|
unsigned char tisr; /* 0xFFF4508A - Transmit Interrupt Status */
|
371 |
|
|
unsigned char misr; /* 0xFFF4508B - Modem/Timer Interrupt Status */
|
372 |
|
|
unsigned char reserved13[2];
|
373 |
|
|
unsigned char bercnt; /* 0xFFF4508E - Bus Error Retry Count */
|
374 |
|
|
unsigned char reserved14[49];
|
375 |
|
|
unsigned char tcor; /* 0xFFF450C0 - Transmit Clock Option */
|
376 |
|
|
unsigned char reserved15[2];
|
377 |
|
|
unsigned char tbpr; /* 0xFFF450C3 - Transmit Baud Rate Period */
|
378 |
|
|
unsigned char reserved16[4];
|
379 |
|
|
unsigned char rcor; /* 0xFFF450C8 - Receive Clock Option */
|
380 |
|
|
unsigned char reserved17[2];
|
381 |
|
|
unsigned char rbpr; /* 0xFFF450CB - Receive Baud Rate Period */
|
382 |
|
|
unsigned char reserved18[10];
|
383 |
|
|
unsigned char cpsr; /* 0xFFF450D6 - CRC Polynomial Select */
|
384 |
|
|
unsigned char reserved19[3];
|
385 |
|
|
unsigned char tpr; /* 0xFFF450DA - Timer Period */
|
386 |
|
|
unsigned char reserved20[3];
|
387 |
|
|
unsigned char msvr_rts; /* 0xFFF450DE - Modem Signal Value - RTS */
|
388 |
|
|
unsigned char msvr_dtr; /* 0xFFF450DF - Modem Signal Value - DTR */
|
389 |
|
|
unsigned char tpilr; /* 0xFFF450E0 - Transmit Priority Interrupt Level */
|
390 |
|
|
unsigned char rpilr; /* 0xFFF450E1 - Receive Priority Interrupt Level */
|
391 |
|
|
unsigned char stk; /* 0xFFF450E2 - Stack */
|
392 |
|
|
unsigned char mpilr; /* 0xFFF450E3 - Modem Priority Interrupt Level */
|
393 |
|
|
unsigned char reserved21[8];
|
394 |
|
|
unsigned char tir; /* 0xFFF450EC - Transmit Interrupt */
|
395 |
|
|
unsigned char rir; /* 0xFFF450ED - Receive Interrupt */
|
396 |
|
|
unsigned char car; /* 0xFFF450EE - Channel Access */
|
397 |
|
|
unsigned char mir; /* 0xFFF450EF - Model Interrupt */
|
398 |
|
|
unsigned char reserved22[6];
|
399 |
|
|
unsigned char dmr; /* 0xFFF450F6 - DMA Mode */
|
400 |
|
|
unsigned char reserved23;
|
401 |
|
|
unsigned char dr; /* 0xFFF450F8 - Receive/Transmit Data */
|
402 |
|
|
} cd2401_regs;
|
403 |
|
|
|
404 |
|
|
|
405 |
|
|
/*
|
406 |
|
|
* Base address of the CD2401.
|
407 |
|
|
* This is not configurable in the MVME167.
|
408 |
|
|
*/
|
409 |
|
|
#define cd2401 ((cd2401_regs * const) 0xFFF45000)
|
410 |
|
|
|
411 |
|
|
|
412 |
|
|
/* CD2401 is clocked at 20 MHz */
|
413 |
|
|
#define CD2401_CLK_RATE 20000000
|
414 |
|
|
|
415 |
|
|
/*
|
416 |
|
|
* Debug print functions: implemented in console.c
|
417 |
|
|
*/
|
418 |
|
|
void printk( char *fmt, ... );
|
419 |
|
|
void BSP_output_string( char * buf );
|
420 |
|
|
|
421 |
|
|
/*
|
422 |
|
|
* Representation of 82596CA LAN controller: Memory Map
|
423 |
|
|
*/
|
424 |
|
|
typedef volatile struct i82596_regs_ {
|
425 |
|
|
unsigned short port_lower; /* 0xFFF46000 */
|
426 |
|
|
unsigned short port_upper; /* 0xFFF46002 */
|
427 |
|
|
unsigned long chan_attn; /* 0xFFF46004 */
|
428 |
|
|
} i82596_regs;
|
429 |
|
|
|
430 |
|
|
/*
|
431 |
|
|
* Base address of the 82596.
|
432 |
|
|
*/
|
433 |
|
|
#define i82596 ((i82596_regs * const) 0xFFF46000)
|
434 |
|
|
|
435 |
|
|
|
436 |
|
|
|
437 |
|
|
/* BSP-wide functions */
|
438 |
|
|
|
439 |
|
|
void bsp_cleanup( void );
|
440 |
|
|
|
441 |
|
|
m68k_isr_entry set_vector(
|
442 |
|
|
rtems_isr_entry handler,
|
443 |
|
|
rtems_vector_number vector,
|
444 |
|
|
int type
|
445 |
|
|
);
|
446 |
|
|
|
447 |
|
|
#ifdef M167_INIT
|
448 |
|
|
#undef EXTERN
|
449 |
|
|
#define EXTERN
|
450 |
|
|
#else
|
451 |
|
|
#undef EXTERN
|
452 |
|
|
#define EXTERN extern
|
453 |
|
|
#endif
|
454 |
|
|
|
455 |
|
|
/*
|
456 |
|
|
* Device Driver Table Entries
|
457 |
|
|
*/
|
458 |
|
|
|
459 |
|
|
/*
|
460 |
|
|
* NOTE: Use the standard Console driver entry
|
461 |
|
|
*/
|
462 |
|
|
|
463 |
|
|
/*
|
464 |
|
|
* NOTE: Use the standard Clock driver entry
|
465 |
|
|
*/
|
466 |
|
|
|
467 |
|
|
/*
|
468 |
|
|
* How many libio files we want
|
469 |
|
|
*/
|
470 |
|
|
|
471 |
|
|
#define BSP_LIBIO_MAX_FDS 20
|
472 |
|
|
|
473 |
|
|
|
474 |
|
|
/* miscellaneous stuff assumed to exist */
|
475 |
|
|
|
476 |
|
|
extern rtems_configuration_table BSP_Configuration;
|
477 |
|
|
|
478 |
|
|
extern m68k_isr_entry M68Kvec[]; /* vector table address */
|
479 |
|
|
|
480 |
|
|
|
481 |
|
|
/*
|
482 |
|
|
* Define the time limits for RTEMS Test Suite test durations.
|
483 |
|
|
* Long test and short test duration limits are provided. These
|
484 |
|
|
* values are in seconds and need to be converted to ticks for the
|
485 |
|
|
* application.
|
486 |
|
|
*
|
487 |
|
|
*/
|
488 |
|
|
|
489 |
|
|
#define MAX_LONG_TEST_DURATION 300 /* 5 minutes = 300 seconds */
|
490 |
|
|
#define MAX_SHORT_TEST_DURATION 3 /* 3 seconds */
|
491 |
|
|
|
492 |
|
|
/*
|
493 |
|
|
* Define the interrupt mechanism for Time Test 27
|
494 |
|
|
*
|
495 |
|
|
* NOTE: We use software interrupt 0
|
496 |
|
|
*/
|
497 |
|
|
#define MUST_WAIT_FOR_INTERRUPT 0
|
498 |
|
|
|
499 |
|
|
#define Install_tm27_vector( handler ) \
|
500 |
|
|
set_vector( (handler), VBR1 * 0x10 + 0x8, 1 ); \
|
501 |
|
|
lcsr->intr_level[2] |= 3; \
|
502 |
|
|
lcsr->intr_ena |= 0x100
|
503 |
|
|
|
504 |
|
|
#define Cause_tm27_intr() lcsr->intr_soft_set |= 0x100
|
505 |
|
|
|
506 |
|
|
#define Clear_tm27_intr() lcsr->intr_clear |= 0x100
|
507 |
|
|
|
508 |
|
|
#define Lower_tm27_intr()
|
509 |
|
|
|
510 |
|
|
#ifdef __cplusplus
|
511 |
|
|
}
|
512 |
|
|
#endif
|
513 |
|
|
|
514 |
|
|
#endif
|
515 |
|
|
/* end of include file */
|