URL https://opencores.org/ocsvn/openrisc/openrisc/trunk

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [no_cpu/] [no_bsp/] [include/] [bsp.h] - Blame information for rev 773

Go to most recent revision | Details | Compare with Previous | View Log


/*  bsp.h
 *
 *  This include file contains all board IO definitions.
 *
 *  XXX : put yours in here
 *
 *  COPYRIGHT (c) 1989-1999.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  $Id: bsp.h,v 1.2 2001-09-27 12:00:26 chris Exp $
 */
 
#ifndef __NO_BSP_h
#define __NO_BSP_h
 
#ifdef __cplusplus
extern "C" {
#endif
 
#include <rtems.h>
#include <console.h>
#include <clockdrv.h>
 
/*
 *  confdefs.h overrides for this BSP:
 *   - number of termios serial ports (defaults to 1)
 *   - Interrupt stack space is not minimum if defined.
 */
 
/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
#define CONFIGURE_INTERRUPT_STACK_MEMORY  (4 * 1024)
 
/*
 *  Define the time limits for RTEMS Test Suite test durations.
 *  Long test and short test duration limits are provided.  These
 *  values are in seconds and need to be converted to ticks for the
 *  application.
 *
 */
 
#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
 
/*
 *  Stuff for Time Test 27
 */
 
#define MUST_WAIT_FOR_INTERRUPT 0
 
#define Install_tm27_vector( handler ) set_vector( (handler), 0, 1 )
 
#define Cause_tm27_intr()
 
#define Clear_tm27_intr()
 
#define Lower_tm27_intr()
 
/*
 *  Simple spin delay in microsecond units for device drivers.
 *  This is very dependent on the clock speed of the target.
 */
 
#define delay( microseconds ) \
  { \
  }
 
/* Constants */
 
#define RAM_START 0
#define RAM_END   0x100000
 
/* miscellaneous stuff assumed to exist */
 
extern rtems_configuration_table BSP_Configuration;
 
/*
 *  Device Driver Table Entries
 */
 
/*
 * NOTE: Use the standard Console driver entry
 */
 
/*
 * NOTE: Use the standard Clock driver entry
 */
 
/* functions */
 
void bsp_cleanup( void );
 
no_cpu_isr_entry set_vector(                    /* returns old vector */
  rtems_isr_entry     handler,                  /* isr routine        */
  rtems_vector_number vector,                   /* vector number      */
  int                 type                      /* RTEMS or RAW intr  */
);
 
#ifdef __cplusplus
}
#endif
 
#endif
/* end of include file */

Line No.	Rev	Author	Line
1	30	unneback	`/* bsp.h`
2			`*`
3			`* This include file contains all board IO definitions.`
4			`*`
5			`* XXX : put yours in here`
6			`*`
7			`* COPYRIGHT (c) 1989-1999.`
8			`* On-Line Applications Research Corporation (OAR).`
9			`*`
10			`* The license and distribution terms for this file may be`
11			`* found in the file LICENSE in this distribution or at`
12			`* http://www.OARcorp.com/rtems/license.html.`
13			`*`
14			`* $Id: bsp.h,v 1.2 2001-09-27 12:00:26 chris Exp $`
15			`*/`
16
17			`#ifndef __NO_BSP_h`
18			`#define __NO_BSP_h`
19
20			`#ifdef __cplusplus`
21			`extern "C" {`
22			`#endif`
23
24			`#include <rtems.h>`
25			`#include <console.h>`
26			`#include <clockdrv.h>`
27
28			`/*`
29			`* confdefs.h overrides for this BSP:`
30			`* - number of termios serial ports (defaults to 1)`
31			`* - Interrupt stack space is not minimum if defined.`
32			`*/`
33
34			`/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */`
35			`#define CONFIGURE_INTERRUPT_STACK_MEMORY (4 * 1024)`
36
37			`/*`
38			`* Define the time limits for RTEMS Test Suite test durations.`
39			`* Long test and short test duration limits are provided. These`
40			`* values are in seconds and need to be converted to ticks for the`
41			`* application.`
42			`*`
43			`*/`
44
45			`#define MAX_LONG_TEST_DURATION 300 /* 5 minutes = 300 seconds */`
46			`#define MAX_SHORT_TEST_DURATION 3 /* 3 seconds */`
47
48			`/*`
49			`* Stuff for Time Test 27`
50			`*/`
51
52			`#define MUST_WAIT_FOR_INTERRUPT 0`
53
54			`#define Install_tm27_vector( handler ) set_vector( (handler), 0, 1 )`
55
56			`#define Cause_tm27_intr()`
57
58			`#define Clear_tm27_intr()`
59
60			`#define Lower_tm27_intr()`
61
62			`/*`
63			`* Simple spin delay in microsecond units for device drivers.`
64			`* This is very dependent on the clock speed of the target.`
65			`*/`
66
67			`#define delay( microseconds ) \`
68			`{ \`
69			`}`
70
71			`/* Constants */`
72
73			`#define RAM_START 0`
74			`#define RAM_END 0x100000`
75
76			`/* miscellaneous stuff assumed to exist */`
77
78			`extern rtems_configuration_table BSP_Configuration;`
79
80			`/*`
81			`* Device Driver Table Entries`
82			`*/`
83
84			`/*`
85			`* NOTE: Use the standard Console driver entry`
86			`*/`
87
88			`/*`
89			`* NOTE: Use the standard Clock driver entry`
90			`*/`
91
92			`/* functions */`
93
94			`void bsp_cleanup( void );`
95
96			`no_cpu_isr_entry set_vector( /* returns old vector */`
97			`rtems_isr_entry handler, /* isr routine */`
98			`rtems_vector_number vector, /* vector number */`
99			`int type /* RTEMS or RAW intr */`
100			`);`
101
102			`#ifdef __cplusplus`
103			`}`
104			`#endif`
105
106			`#endif`
107			`/* end of include file */`

Browse

Tools

Subversion Repositories openrisc

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [no_cpu/] [no_bsp/] [include/] [bsp.h] - Blame information for rev 773