OpenCores
URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [powerpc/] [eth_comm/] [startup/] [alloc860.c] - Blame information for rev 389

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 30 unneback 
/*
2 
 * MPC860 buffer descriptor allocation routines
3 
 *
4 
 * Modified from original code by Jay Monkman (jmonkman@frasca.com)
5 
 *
6 
 * Original was written by:
7 
 * W. Eric Norum
8 
 * Saskatchewan Accelerator Laboratory
9 
 * University of Saskatchewan
10 
 * Saskatoon, Saskatchewan, CANADA
11 
 * eric@skatter.usask.ca
12 
 *
13 
 *  $Id: alloc860.c,v 1.2 2001-09-27 12:00:36 chris Exp $
14 
 */
15 
 
16 
#include <rtems.h>
17 
#include <bsp.h>
18 
#include <rtems/rtems/intr.h>
19 
#include <rtems/error.h>
20 
#include <mpc860.h>
21 
#include <info.h>
22 
 
23 
/*
24 
 * Send a command to the CPM RISC processer
25 
 */
26 
void M860ExecuteRISC(rtems_unsigned16 command)
27 
{
28 
  rtems_unsigned16 lvl;
29 
 
30 
  rtems_interrupt_disable(lvl);
31 
  while (m860.cpcr & M860_CR_FLG) {
32 
    continue;
33 
  }
34 
 
35 
  m860.cpcr = command | M860_CR_FLG;
36 
  rtems_interrupt_enable (lvl);
37 
}
38 
 
39 
 
40 
/*
41 
 * Allocation order:
42 
 *      - Dual-Port RAM section 0
43 
 *      - Dual-Port RAM section 1
44 
 *      - Dual-Port RAM section 2
45 
 *      - Dual-Port RAM section 3
46 
 *      - Dual-Port RAM section 4
47 
 */
48 
static struct {
49 
  char          *base;
50 
  unsigned int  size;
51 
  unsigned int  used;
52 
} bdregions[] = {
53 
  { (char *)&m860.dpram0[0],    sizeof m860.dpram0,     0 },
54 
  { (char *)&m860.dpram1[0],    sizeof m860.dpram1,     0 },
55 
  { (char *)&m860.dpram2[0],    sizeof m860.dpram2,     0 },
56 
  { (char *)&m860.dpram3[0],    sizeof m860.dpram3,     0 },
57 
  { (char *)&m860.dpram4[0],    sizeof m860.dpram4,     0 },
58 
};
59 
 
60 
void *
61 
M860AllocateBufferDescriptors (int count)
62 
{
63 
  unsigned int i;
64 
  ISR_Level level;
65 
  void *bdp = NULL;
66 
  unsigned int want = count * sizeof(m860BufferDescriptor_t);
67 
 
68 
  /*
69 
   * Running with interrupts disabled is usually considered bad
70 
   * form, but this routine is probably being run as part of an
71 
   * initialization sequence so the effect shouldn't be too severe.
72 
   */
73 
  _ISR_Disable (level);
74 
  for (i = 0 ; i < sizeof(bdregions) / sizeof(bdregions[0]) ; i++) {
75 
    /*
76 
     * Verify that the region exists.
77 
     * This test is necessary since some chips have
78 
     * less dual-port RAM.
79 
     */
80 
    if (bdregions[i].used == 0) {
81 
      volatile unsigned char *cp = bdregions[i].base;
82 
      *cp = 0xAA;
83 
      if (*cp != 0xAA) {
84 
        bdregions[i].used = bdregions[i].size;
85 
        continue;
86 
      }
87 
      *cp = 0x55;
88 
      if (*cp != 0x55) {
89 
        bdregions[i].used = bdregions[i].size;
90 
        continue;
91 
      }
92 
      *cp = 0x0;
93 
    }
94 
    if (bdregions[i].size - bdregions[i].used >= want) {
95 
      bdp = bdregions[i].base + bdregions[i].used;
96 
      bdregions[i].used += want;
97 
      break;
98 
    }
99 
  }
100 
  _ISR_Enable(level);
101 
  if (bdp == NULL)
102 
    rtems_panic("Can't allocate %d buffer descriptor(s).\n", count);
103 
  return bdp;
104 
}
105 
 
106 
void *
107 
M860AllocateRiscTimers (int count)
108 
{
109 
  /*
110 
   * Convert the count to the number of buffer descriptors
111 
   * of equal or larger size.  This ensures that all buffer
112 
   * descriptors are allocated with appropriate alignment.
113 
   */
114 
  return M860AllocateBufferDescriptors (((count * 4) +
115 
                                         sizeof(m860BufferDescriptor_t) - 1) /
116 
                                        sizeof(m860BufferDescriptor_t));
117 
}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.