Subversion Repositories openrisc_me

This BSP was adapted from Eric Valette MCP750 Generic motorola

port to MVME2300 by Jay Kulpinski .

In other to work correctly, the Tundra Universe chip must

be turned off using PPCBug as explained below.

The Tundra Universe chip is a bridge between the PCI and VME buses.

It has four programmable mapping windows in each direction, much like

the Raven.  PPCBUG lets you specify the mappings if you don't want

to do it in your application.  The mappings on our board, which may

or not be the default Motorola mappings, had one window appearing

at 0x01000000 in PCI space.  This is the same place the bootloader

code remapped the Raven registers.  The windows' mappings are

very likely to be application specific, so I wouldn't worry too

much about setting them in the BSP, but it would be nice to have

a standard interface to do so.  Whoever needs that first can

incorporate the ppcn_60x BSP code for the Universe chip. :-)

These options in PPCBUG's ENV command did the job:

VME3PCI Master Master Enable [Y/N] = Y?

PCI Slave Image 0 Control                = 00000000?   <-----

PCI Slave Image 0 Base Address Register  = 00000000?

PCI Slave Image 0 Bound Address Register = 00000000?

PCI Slave Image 0 Translation Offset     = 00000000?

PCI Slave Image 1 Control                = 00000000?   <-----

PCI Slave Image 1 Base Address Register  = 01000000?

PCI Slave Image 1 Bound Address Register = 20000000?

PCI Slave Image 1 Translation Offset     = 00000000?

PCI Slave Image 2 Control                = 00000000?   <-----

PCI Slave Image 2 Base Address Register  = 20000000?

PCI Slave Image 2 Bound Address Register = 22000000?

PCI Slave Image 2 Translation Offset     = D0000000?

PCI Slave Image 3 Control                = 00000000?   <-----

PCI Slave Image 3 Base Address Register  = 2FFF0000?

PCI Slave Image 3 Bound Address Register = 30000000?

PCI Slave Image 3 Translation Offset     = D0000000?