URL https://opencores.org/ocsvn/openrisc_me/openrisc_me/trunk
Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [powerpc/] [shared/] [bootloader/] [pci.c] - Blame information for rev 173

Details | Compare with Previous | View Log

/*
 *  pci.c -- Crude pci handling for early boot.
 *
 *  Copyright (C) 1998, 1999 Gabriel Paubert, paubert@iram.es
 *
 *  Modified to compile in RTEMS development environment
 *  by Eric Valette
 *
 *  Copyright (C) 1999 Eric Valette. valette@crf.canon.fr
 *
 *  The license and distribution terms for this file may be
 *  found in found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 * $Id: pci.c,v 1.2 2001-09-27 12:01:06 chris Exp $
 */
 
 
#include <sys/types.h>
#include <libcpu/spr.h>
#include "bootldr.h"
#include "pci.h"
#include <libcpu/io.h>
#include <bsp/consoleIo.h>
 
typedef unsigned int u32;
 
/*#define DEBUG*/
/* Used to reorganize PCI space on stupid machines which spread resources
 * across a wide address space. This is bad when P2P bridges are present
 * or when it limits the mappings that a resource hog like a PCI<->VME
 * bridge can use.
 */
 
typedef struct _pci_resource {
        struct _pci_resource *next;
        struct pci_dev *dev;
        u_long base;    /* will be 64 bits on 64 bits machines */
        u_long size;
        u_char type;    /* 1 is I/O else low order 4 bits of the memory type */
        u_char reg;     /* Register # in conf space header */
        u_short cmd;    /* Original cmd byte */
} pci_resource;
 
typedef struct _pci_area {
        struct _pci_area *next;
        u_long start;
        u_long end;
        struct pci_bus *bus;
        u_int flags;
} pci_area;
 
typedef struct _pci_area_head {
        pci_area *head;
        u_long mask;
        int high;       /* To allocate from top */
} pci_area_head;
 
#define PCI_AREA_PREFETCHABLE 0
#define PCI_AREA_MEMORY 1
#define PCI_AREA_IO 2
 
struct _pci_private {
        volatile u_int * config_addr;
        volatile u_char * config_data;
        struct pci_dev **last_dev_p;
        struct pci_bus pci_root;
        pci_resource *resources;
        pci_area_head io, mem;
 
} pci_private = {
        config_addr: NULL,
        config_data: (volatile u_char *) 0x80800000,
        last_dev_p: NULL,
        resources: NULL,
        io: {NULL, 0xfff, 0},
        mem: {NULL, 0xfffff, 0}
};
 
#define pci ((struct _pci_private *)(bd->pci_private))
#define pci_root pci->pci_root
 
#if !defined(DEBUG)
#undef PCI_DEBUG
/*
  #else
  #define PCI_DEBUG
*/
#endif
 
#if defined(PCI_DEBUG)
static void
print_pci_resources(const char *s) {
        pci_resource *p;
        printk("%s", s);
        for (p=pci->resources; p; p=p->next) {
                printk("  %p:%p %06x %08lx %08lx %d\n",
                       p, p->next,
                       (p->dev->devfn<<8)+(p->dev->bus->number<<16)
                       +0x10+p->reg*4,
                       p->base,
                       p->size,
                       p->type);
        }
}
 
static void
print_pci_area(pci_area *p) {
        for (; p; p=p->next) {
                printk("    %p:%p %p %08lx %08lx\n",
                       p, p->next, p->bus, p->start, p->end);
        }
}
 
static void
print_pci_areas(const char *s) {
        printk("%s  PCI I/O areas:\n",s);
        print_pci_area(pci->io.head);
        printk("  PCI memory areas:\n");
        print_pci_area(pci->mem.head);
}
#else
#define print_pci_areas(x) 
#define print_pci_resources(x)
#endif
 
/* Maybe there are some devices who use a size different
 * from the alignment. For now we assume both are the same.
 * The blacklist might be used for other weird things in the future too,
 * since weird non PCI complying devices seem to proliferate these days.
 */
 
struct blacklist_entry {
        u_short vendor, device;
        u_char reg;
        u_long actual_size;
};
 
#define BLACKLIST(vid, did, breg, actual_size) \
        {PCI_VENDOR_ID_##vid, PCI_DEVICE_ID_##vid##_##did, breg, actual_size} 
 
static struct blacklist_entry blacklist[] = {
        BLACKLIST(S3, TRIO, 0, 0x04000000),
        {0xffff, 0, 0, 0}
};
 
 
/* This function filters resources and then inserts them into a list of
 * configurable pci resources.
 */
 
 
#define AREA(r) \
(((r->type&PCI_BASE_ADDRESS_SPACE)==PCI_BASE_ADDRESS_SPACE_IO) ? PCI_AREA_IO :\
          ((r->type&PCI_BASE_ADDRESS_MEM_PREFETCH) ? PCI_AREA_PREFETCHABLE :\
           PCI_AREA_MEMORY))
 
static int insert_before(pci_resource *e, pci_resource *t) {
        if (e->dev->bus->number != t->dev->bus->number)
          return e->dev->bus->number > t->dev->bus->number;
        if (AREA(e) != AREA(t)) return AREA(e)<AREA(t);
        return (e->size > t->size);
}
 
static void insert_resource(pci_resource *r) {
        struct blacklist_entry *b;
        pci_resource *p;
        if (!r) return;
 
        /* First fixup in case we have a blacklist entry. Note that this
         * may temporarily leave a resource in an inconsistent state: with
         * (base & (size-1)) !=0. This is harmless.
         */
        for (b=blacklist; b->vendor!=0xffff; b++) {
                if ((r->dev->vendor==b->vendor) &&
                    (r->dev->device==b->device) &&
                    (r->reg==b->reg)) {
                        r->size=b->actual_size;
                        break;
                }
        }
 
        /* Motorola NT firmware does not configure pci devices which are not
         * required for booting, others do. For now:
         * - allocated devices in the ISA range (64kB I/O, 16Mb memory)
         *   but non zero base registers are left as is.
         * - all other registers, whether already allocated or not, are
         *   reallocated unless they require an inordinate amount of
         *   resources (>256 Mb for memory >64kB for I/O). These
         *   devices with too large mapping requirements are simply ignored
         *   and their bases are set to 0. This should disable the
         *   corresponding decoders according to the PCI specification.
         *   Many devices are buggy in this respect, however, but the
         *   limits have hopefully been set high enough to avoid problems.
         */
 
        if ((r->type==PCI_BASE_ADDRESS_SPACE_IO)
            ? (r->base && r->base <0x10000)
            : (r->base && r->base <0x1000000)) {
                sfree(r);
                return;
        }
 
        if ((r->type==PCI_BASE_ADDRESS_SPACE_IO)
            ? (r->size >= 0x10000)
            : (r->size >= 0x10000000)) {
                r->size  = 0;
                r->base  = 0;
        }
 
        /* Now insert into the list sorting by
         * 1) decreasing bus number
         * 2) space: prefetchable memory, non-prefetchable and finally I/O
         * 3) decreasing size
         */
        if (!pci->resources || insert_before(r, pci->resources)) {
                r->next = pci->resources;
                pci->resources=r;
        } else {
                for (p=pci->resources; p->next; p=p->next) {
                        if (insert_before(r, p->next)) break;
                }
                r->next=p->next;
                p->next=r;
        }
}
 
/* This version only works for bus 0. I don't have any P2P bridges to test
 * a more sophisticated version which has therefore not been implemented.
 * Prefetchable memory is not yet handled correctly either.
 * And several levels of PCI bridges much less even since there must be
 * allocated together to be able to setup correctly the top bridge.
 */
 
static u_long find_range(u_char bus, u_char type,
                       pci_resource **first,
                       pci_resource **past, u_int *flags) {
        pci_resource *p;
        u_long total=0;
        u_int fl=0;
 
        for (p=pci->resources; p; p=p->next) {
                if ((p->dev->bus->number == bus) &&
                    AREA(p)==type) break;
        }
        *first = p;
        for (; p; p=p->next) {
                if ((p->dev->bus->number != bus) ||
                    AREA(p)!=type || p->size == 0) break;
                total = total+p->size;
                fl |= 1<<p->type;
        }
        *past = p;
        /* This will be used later to tell whether there are any 32 bit
         * devices in an area which could be mapped higher than 4Gb
         * on 64 bits architectures
         */
        *flags = fl;
        return total;
}
 
static inline void init_free_area(pci_area_head *h, u_long start,
                            u_long end, u_int mask, int high) {
        pci_area *p;
        p = salloc(sizeof(pci_area));
        if (!p) return;
        h->head = p;
        p->next = NULL;
        p->start = (start+mask)&~mask;
        p->end = (end-mask)|mask;
        p->bus = NULL;
        h->mask = mask;
        h->high = high;
}
 
static void insert_area(pci_area_head *h, pci_area *p) {
        pci_area *q = h->head;
        if (!p) return;
        if (q && (q->start< p->start)) {
                for(;q->next && q->next->start<p->start; q = q->next);
                if ((q->end >= p->start) ||
                    (q->next && p->end>=q->next->start)) {
                        sfree(p);
                        printk("Overlapping pci areas!\n");
                        return;
                }
                p->next = q->next;
                q->next = p;
        } else { /* Insert at head */
                if (q && (p->end >= q->start)) {
                        sfree(p);
                        printk("Overlapping pci areas!\n");
                        return;
                }
                p->next = q;
                h->head = p;
        }
}
 
static
void remove_area(pci_area_head *h, pci_area *p) {
        pci_area *q = h->head;
 
        if (!p || !q) return;
        if (q==p) {
                h->head = q->next;
                return;
        }
        for(;q && q->next!=p; q=q->next);
        if (q) q->next=p->next;
}
 
static pci_area * alloc_area(pci_area_head *h, struct pci_bus *bus,
                                u_long required, u_long mask, u_int flags) {
        pci_area *p;
        pci_area *from, *split, *new;
 
        required = (required+h->mask) & ~h->mask;
        for (p=h->head, from=NULL; p; p=p->next) {
                u_long l1 = ((p->start+required+mask)&~mask)-1;
                u_long l2 = ((p->start+mask)&~mask)+required-1;
                /* Allocated areas point to the bus to which they pertain */
                if (p->bus) continue;
                if ((p->end)>=l1 || (p->end)>=l2) from=p;
                if (from && !h->high) break;
        }
        if (!from) return NULL;
 
        split = salloc(sizeof(pci_area));
        new = salloc(sizeof(pci_area));
        /* If allocation of new succeeds then allocation of split has
         * also been successful (given the current mm algorithms) !
         */
        if (!new) {
                sfree(split);
                return NULL;
        }
        new->bus = bus;
        new->flags = flags;
        /* Now allocate pci_space taking alignment into account ! */
        if (h->high) {
                u_long l1 = ((from->end+1)&~mask)-required;
                u_long l2 = (from->end+1-required)&~mask;
                new->start = (l1>l2) ? l1 : l2;
                split->end = from->end;
                from->end = new->start-1;
                split->start = new->start+required;
                new->end = new->start+required-1;
        } else {
                u_long l1 = ((from->start+mask)&~mask)+required-1;
                u_long l2 = ((from->start+required+mask)&~mask)-1;
                new->end = (l1<l2) ? l1 : l2;
                split->start = from->start;
                from->start = new->end+1;
                new->start = new->end+1-required;
                split->end = new->start-1;
        }
 
        if (from->end+1 == from->start) remove_area(h, from);
        if (split->end+1 != split->start) {
                split->bus = NULL;
                insert_area(h, split);
        } else {
                sfree(split);
        }
        insert_area(h, new);
        print_pci_areas("alloc_area called:\n");
        return new;
}
 
static inline
void alloc_space(pci_area *p, pci_resource *r) {
        if (p->start & (r->size-1)) {
                r->base = p->end+1-r->size;
                p->end -= r->size;
        } else {
                r->base = p->start;
                p->start += r->size;
        }
}
 
static void reconfigure_bus_space(u_char bus, u_char type, pci_area_head *h) {
        pci_resource *first, *past, *r;
        pci_area *area, tmp;
        u_int flags;
        u_int required = find_range(bus, type, &first, &past, &flags);
 
        if (required==0) return;
        area = alloc_area(h, first->dev->bus, required, first->size-1, flags);
        if (!area) return;
        tmp = *area;
        for (r=first; r!=past; r=r->next) {
                alloc_space(&tmp, r);
        }
}
 
static void reconfigure_pci(void) {
        pci_resource *r;
        struct pci_dev *dev;
        /* FIXME: for now memory is relocated from low, it's better
         * to start from higher addresses.
         */
        init_free_area(&pci->io, 0x10000, 0x7fffff, 0xfff, 0);
        init_free_area(&pci->mem, 0x1000000, 0x3cffffff, 0xfffff, 0);
 
        /* First reconfigure the I/O space, this will be more
         * complex when there is more than 1 bus. And 64 bits
         * devices are another kind of problems.
         */
        reconfigure_bus_space(0, PCI_AREA_IO, &pci->io);
        reconfigure_bus_space(0, PCI_AREA_MEMORY, &pci->mem);
        reconfigure_bus_space(0, PCI_AREA_PREFETCHABLE, &pci->mem);
 
        /* Now we have to touch the configuration space of all
         * the devices to remap them better than they are right now.
         * This is done in 3 steps:
         * 1) first disable I/O and memory response of all devices
         * 2) modify the base registers
         * 3) restore the original PCI_COMMAND register.
         */
        for (r=pci->resources; r; r= r->next) {
                if (!r->dev->sysdata) {
                        r->dev->sysdata=r;
                        pci_read_config_word(r->dev, PCI_COMMAND, &r->cmd);
                        pci_write_config_word(r->dev, PCI_COMMAND,
                                              r->cmd & ~(PCI_COMMAND_IO|
                                                         PCI_COMMAND_MEMORY));
                }
        }
 
        for (r=pci->resources; r; r= r->next) {
                pci_write_config_dword(r->dev,
                                       PCI_BASE_ADDRESS_0+(r->reg<<2),
                                       r->base);
                if ((r->type&
                     (PCI_BASE_ADDRESS_SPACE|
                      PCI_BASE_ADDRESS_MEM_TYPE_MASK)) ==
                    (PCI_BASE_ADDRESS_SPACE_MEMORY|
                     PCI_BASE_ADDRESS_MEM_TYPE_64)) {
                        pci_write_config_dword(r->dev,
                                               PCI_BASE_ADDRESS_1+
                                               (r->reg<<2),
                                               0);
                }
        }
        for (dev=bd->pci_devices; dev; dev= dev->next) {
                if (dev->sysdata) {
                        pci_write_config_word(dev, PCI_COMMAND,
                                              ((pci_resource *)dev->sysdata)
                                              ->cmd);
                        dev->sysdata=NULL;
                }
        }
}
 
static int
indirect_pci_read_config_byte(unsigned char bus, unsigned char dev_fn,
                              unsigned char offset, unsigned char *val) {
        out_be32(pci->config_addr,
                 0x80|(bus<<8)|(dev_fn<<16)|((offset&~3)<<24));
        *val=in_8(pci->config_data + (offset&3));
        return PCIBIOS_SUCCESSFUL;
}
 
static int
indirect_pci_read_config_word(unsigned char bus, unsigned char dev_fn,
                              unsigned char offset, unsigned short *val) {
        *val = 0xffff;
        if (offset&1) return PCIBIOS_BAD_REGISTER_NUMBER;
        out_be32(pci->config_addr,
                 0x80|(bus<<8)|(dev_fn<<16)|((offset&~3)<<24));
        *val=in_le16((volatile u_short *)(pci->config_data + (offset&3)));
        return PCIBIOS_SUCCESSFUL;
}
 
static int
indirect_pci_read_config_dword(unsigned char bus, unsigned char dev_fn,
                              unsigned char offset, unsigned int *val) {
        *val = 0xffffffff;
        if (offset&3) return PCIBIOS_BAD_REGISTER_NUMBER;
        out_be32(pci->config_addr,
                 0x80|(bus<<8)|(dev_fn<<16)|(offset<<24));
        *val=in_le32((volatile u_int *)pci->config_data);
        return PCIBIOS_SUCCESSFUL;
}
 
static int
indirect_pci_write_config_byte(unsigned char bus, unsigned char dev_fn,
                               unsigned char offset, unsigned char val) {
        out_be32(pci->config_addr,
                 0x80|(bus<<8)|(dev_fn<<16)|((offset&~3)<<24));
        out_8(pci->config_data + (offset&3), val);
        return PCIBIOS_SUCCESSFUL;
}
 
static int
indirect_pci_write_config_word(unsigned char bus, unsigned char dev_fn,
                               unsigned char offset, unsigned short val) {
        if (offset&1) return PCIBIOS_BAD_REGISTER_NUMBER;
        out_be32(pci->config_addr,
                 0x80|(bus<<8)|(dev_fn<<16)|((offset&~3)<<24));
        out_le16((volatile u_short *)(pci->config_data + (offset&3)), val);
        return PCIBIOS_SUCCESSFUL;
}
 
static int
indirect_pci_write_config_dword(unsigned char bus, unsigned char dev_fn,
                                unsigned char offset, unsigned int val) {
        if (offset&3) return PCIBIOS_BAD_REGISTER_NUMBER;
        out_be32(pci->config_addr,
                 0x80|(bus<<8)|(dev_fn<<16)|(offset<<24));
        out_le32((volatile u_int *)pci->config_data, val);
        return PCIBIOS_SUCCESSFUL;
}
 
static const struct pci_config_access_functions indirect_functions = {
        indirect_pci_read_config_byte,
        indirect_pci_read_config_word,
        indirect_pci_read_config_dword,
        indirect_pci_write_config_byte,
        indirect_pci_write_config_word,
        indirect_pci_write_config_dword
};
 
 
static int
direct_pci_read_config_byte(unsigned char bus, unsigned char dev_fn,
                              unsigned char offset, unsigned char *val) {
        if (bus != 0 || (1<<PCI_SLOT(dev_fn) & 0xff8007fe)) {
                *val=0xff;
                return PCIBIOS_DEVICE_NOT_FOUND;
        }
        *val=in_8(pci->config_data + ((1<<PCI_SLOT(dev_fn))&~1)
                  + (PCI_FUNC(dev_fn)<<8) + offset);
        return PCIBIOS_SUCCESSFUL;
}
 
static int
direct_pci_read_config_word(unsigned char bus, unsigned char dev_fn,
                              unsigned char offset, unsigned short *val) {
        *val = 0xffff;
        if (offset&1) return PCIBIOS_BAD_REGISTER_NUMBER;
        if (bus != 0 || (1<<PCI_SLOT(dev_fn) & 0xff8007fe)) {
                return PCIBIOS_DEVICE_NOT_FOUND;
        }
        *val=in_le16((volatile u_short *)
                     (pci->config_data + ((1<<PCI_SLOT(dev_fn))&~1)
                      + (PCI_FUNC(dev_fn)<<8) + offset));
        return PCIBIOS_SUCCESSFUL;
}
 
static int
direct_pci_read_config_dword(unsigned char bus, unsigned char dev_fn,
                              unsigned char offset, unsigned int *val) {
        *val = 0xffffffff;
        if (offset&3) return PCIBIOS_BAD_REGISTER_NUMBER;
        if (bus != 0 || (1<<PCI_SLOT(dev_fn) & 0xff8007fe)) {
                return PCIBIOS_DEVICE_NOT_FOUND;
        }
        *val=in_le32((volatile u_int *)
                     (pci->config_data + ((1<<PCI_SLOT(dev_fn))&~1)
                      + (PCI_FUNC(dev_fn)<<8) + offset));
        return PCIBIOS_SUCCESSFUL;
}
 
static int
direct_pci_write_config_byte(unsigned char bus, unsigned char dev_fn,
                               unsigned char offset, unsigned char val) {
        if (bus != 0 || (1<<PCI_SLOT(dev_fn) & 0xff8007fe)) {
                return PCIBIOS_DEVICE_NOT_FOUND;
        }
        out_8(pci->config_data + ((1<<PCI_SLOT(dev_fn))&~1)
              + (PCI_FUNC(dev_fn)<<8) + offset,
              val);
        return PCIBIOS_SUCCESSFUL;
}
 
static int
direct_pci_write_config_word(unsigned char bus, unsigned char dev_fn,
                               unsigned char offset, unsigned short val) {
        if (offset&1) return PCIBIOS_BAD_REGISTER_NUMBER;
        if (bus != 0 || (1<<PCI_SLOT(dev_fn) & 0xff8007fe)) {
                return PCIBIOS_DEVICE_NOT_FOUND;
        }
        out_le16((volatile u_short *)
                 (pci->config_data + ((1<<PCI_SLOT(dev_fn))&~1)
                  + (PCI_FUNC(dev_fn)<<8) + offset),
                 val);
        return PCIBIOS_SUCCESSFUL;
}
 
static int
direct_pci_write_config_dword(unsigned char bus, unsigned char dev_fn,
                                unsigned char offset, unsigned int val) {
        if (offset&3) return PCIBIOS_BAD_REGISTER_NUMBER;
        if (bus != 0 || (1<<PCI_SLOT(dev_fn) & 0xff8007fe)) {
                return PCIBIOS_DEVICE_NOT_FOUND;
        }
        out_le32((volatile u_int *)
                 (pci->config_data + ((1<<PCI_SLOT(dev_fn))&~1)
                  + (PCI_FUNC(dev_fn)<<8) + offset),
                 val);
        return PCIBIOS_SUCCESSFUL;
}
 
static const struct pci_config_access_functions direct_functions = {
        direct_pci_read_config_byte,
        direct_pci_read_config_word,
        direct_pci_read_config_dword,
        direct_pci_write_config_byte,
        direct_pci_write_config_word,
        direct_pci_write_config_dword
};
 
 
void pci_read_bases(struct pci_dev *dev, unsigned int howmany)
{
        unsigned int reg, nextreg;
#define REG (PCI_BASE_ADDRESS_0 + (reg<<2))
        u_short cmd;
        u32 l, ml;
        pci_read_config_word(dev, PCI_COMMAND, &cmd);
 
        for(reg=0; reg<howmany; reg=nextreg) {
                pci_resource *r;
                nextreg=reg+1;
                pci_read_config_dword(dev, REG, &l);
#if 0
                if (l == 0xffffffff /*AJF || !l*/) continue;
#endif
                /* Note that disabling the memory response of a host bridge
                 * would lose data if a DMA transfer were in progress. In a
                 * bootloader we don't care however. Also we can't print any
                 * message for a while since we might just disable the console.
                 */
                pci_write_config_word(dev, PCI_COMMAND, cmd &
                                      ~(PCI_COMMAND_IO|PCI_COMMAND_MEMORY));
                pci_write_config_dword(dev, REG, ~0);
                pci_read_config_dword(dev, REG, &ml);
                pci_write_config_dword(dev, REG, l);
 
                /* Reenable the device now that we've played with
                 * base registers.
                 */
                pci_write_config_word(dev, PCI_COMMAND, cmd);
 
                /* seems to be an unused entry skip it */
                if ( ml == 0 || ml == 0xffffffff ) continue;
 
                if ((l &
                     (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK))
                    == (PCI_BASE_ADDRESS_MEM_TYPE_64
                    |PCI_BASE_ADDRESS_SPACE_MEMORY)) {
                        nextreg=reg+2;
                }
                dev->base_address[reg] = l;
                r = salloc(sizeof(pci_resource));
                if (!r) {
                        printk("Error allocating pci_resource struct.\n");
                        continue;
                }
                r->dev = dev;
                r->reg = reg;
                if ((l&PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) {
                        r->type = l&~PCI_BASE_ADDRESS_IO_MASK;
                        r->base = l&PCI_BASE_ADDRESS_IO_MASK;
                        r->size = ~(ml&PCI_BASE_ADDRESS_IO_MASK)+1;
                } else {
                        r->type = l&~PCI_BASE_ADDRESS_MEM_MASK;
                        r->base = l&PCI_BASE_ADDRESS_MEM_MASK;
                        r->size = ~(ml&PCI_BASE_ADDRESS_MEM_MASK)+1;
                }
                /* Check for the blacklisted entries */
                insert_resource(r);
        }
}
 
 
 
 
u_int pci_scan_bus(struct pci_bus *bus)
{
        unsigned int devfn, l, max, class;
        unsigned char irq, hdr_type, is_multi = 0;
        struct pci_dev *dev, **bus_last;
        struct pci_bus *child;
 
        bus_last = &bus->devices;
        max = bus->secondary;
        for (devfn = 0; devfn < 0xff; ++devfn) {
                if (PCI_FUNC(devfn) && !is_multi) {
                        /* not a multi-function device */
                        continue;
                }
                if (pcibios_read_config_byte(bus->number, devfn, PCI_HEADER_TYPE, &hdr_type))
                        continue;
                if (!PCI_FUNC(devfn))
                        is_multi = hdr_type & 0x80;
 
                if (pcibios_read_config_dword(bus->number, devfn, PCI_VENDOR_ID, &l) ||
                    /* some broken boards return 0 if a slot is empty: */
                    l == 0xffffffff || l == 0x00000000 || l == 0x0000ffff || l == 0xffff0000) {
                        is_multi = 0;
                        continue;
                }
 
                dev = salloc(sizeof(*dev));
                dev->bus = bus;
                dev->devfn  = devfn;
                dev->vendor = l & 0xffff;
                dev->device = (l >> 16) & 0xffff;
 
                pcibios_read_config_dword(bus->number, devfn,
                                          PCI_CLASS_REVISION, &class);
                class >>= 8;                                /* upper 3 bytes */
                dev->class = class;
                class >>= 8;
                dev->hdr_type = hdr_type;
 
                switch (hdr_type & 0x7f) {                  /* header type */
                case PCI_HEADER_TYPE_NORMAL:                /* standard header */
                        if (class == PCI_CLASS_BRIDGE_PCI)
                                goto bad;
                        /*
                         * If the card generates interrupts, read IRQ number
                         * (some architectures change it during pcibios_fixup())
                         */
                        pcibios_read_config_byte(bus->number, dev->devfn, PCI_INTERRUPT_PIN, &irq);
                        if (irq)
                                pcibios_read_config_byte(bus->number, dev->devfn, PCI_INTERRUPT_LINE, &irq);
                        dev->irq = irq;
                        /*
                         * read base address registers, again pcibios_fixup() can
                         * tweak these
                         */
                        pci_read_bases(dev, 6);
                        pcibios_read_config_dword(bus->number, devfn, PCI_ROM_ADDRESS, &l);
                        dev->rom_address = (l == 0xffffffff) ? 0 : l;
                        break;
                case PCI_HEADER_TYPE_BRIDGE:                /* bridge header */
                        if (class != PCI_CLASS_BRIDGE_PCI)
                                goto bad;
                        pci_read_bases(dev, 2);
                        pcibios_read_config_dword(bus->number, devfn, PCI_ROM_ADDRESS1, &l);
                        dev->rom_address = (l == 0xffffffff) ? 0 : l;
                        break;
                case PCI_HEADER_TYPE_CARDBUS:               /* CardBus bridge header */
                        if (class != PCI_CLASS_BRIDGE_CARDBUS)
                                goto bad;
                        pci_read_bases(dev, 1);
                        break;
                default:                                    /* unknown header */
                bad:
                        printk("PCI device with unknown "
                               "header type %d ignored.\n",
                               hdr_type&0x7f);
                        continue;
                }
 
                /*
                 * Put it into the global PCI device chain. It's used to
                 * find devices once everything is set up.
                 */
                *pci->last_dev_p = dev;
                pci->last_dev_p = &dev->next;
 
                /*
                 * Now insert it into the list of devices held
                 * by the parent bus.
                 */
                *bus_last = dev;
                bus_last = &dev->sibling;
 
        }
 
        /*
         * After performing arch-dependent fixup of the bus, look behind
         * all PCI-to-PCI bridges on this bus.
         */
        for(dev=bus->devices; dev; dev=dev->sibling)
                /*
                 * If it's a bridge, scan the bus behind it.
                 */
                if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI) {
                        unsigned int buses;
                        unsigned int devfn = dev->devfn;
                        unsigned short cr;
 
                        /*
                         * Insert it into the tree of buses.
                         */
                        child = salloc(sizeof(*child));
                        child->next = bus->children;
                        bus->children = child;
                        child->self = dev;
                        child->parent = bus;
 
                        /*
                         * Set up the primary, secondary and subordinate
                         * bus numbers.
                         */
                        child->number = child->secondary = ++max;
                        child->primary = bus->secondary;
                        child->subordinate = 0xff;
                        /*
                         * Clear all status bits and turn off memory,
                         * I/O and master enables.
                         */
                        pcibios_read_config_word(bus->number, devfn, PCI_COMMAND, &cr);
                        pcibios_write_config_word(bus->number, devfn, PCI_COMMAND, 0x0000);
                        pcibios_write_config_word(bus->number, devfn, PCI_STATUS, 0xffff);
                        /*
                         * Read the existing primary/secondary/subordinate bus
                         * number configuration to determine if the PCI bridge
                         * has already been configured by the system.  If so,
                         * do not modify the configuration, merely note it.
                         */
                        pcibios_read_config_dword(bus->number, devfn, PCI_PRIMARY_BUS, &buses);
                        if ((buses & 0xFFFFFF) != 0)
                          {
                            unsigned int cmax;
 
                            child->primary = buses & 0xFF;
                            child->secondary = (buses >> 8) & 0xFF;
                            child->subordinate = (buses >> 16) & 0xFF;
                            child->number = child->secondary;
                            cmax = pci_scan_bus(child);
                            if (cmax > max) max = cmax;
                          }
                        else
                          {
                            /*
                             * Configure the bus numbers for this bridge:
                             */
                            buses &= 0xff000000;
                            buses |=
                              (((unsigned int)(child->primary)     <<  0) |
                               ((unsigned int)(child->secondary)   <<  8) |
                               ((unsigned int)(child->subordinate) << 16));
                            pcibios_write_config_dword(bus->number, devfn, PCI_PRIMARY_BUS, buses);
                            /*
                             * Now we can scan all subordinate buses:
                             */
                            max = pci_scan_bus(child);
                            /*
                             * Set the subordinate bus number to its real
                             * value:
                             */
                            child->subordinate = max;
                            buses = (buses & 0xff00ffff)
                              | ((unsigned int)(child->subordinate) << 16);
                            pcibios_write_config_dword(bus->number, devfn, PCI_PRIMARY_BUS, buses);
                          }
                        pcibios_write_config_word(bus->number, devfn, PCI_COMMAND, cr);
                }
 
        /*
         * We've scanned the bus and so we know all about what's on
         * the other side of any bridges that may be on this bus plus
         * any devices.
         *
         * Return how far we've got finding sub-buses.
         */
        return max;
}
 
void
pci_fixup(void) {
        struct pci_dev *p;
        struct pci_bus *bus;
        for (bus = &pci_root; bus; bus=bus->next) {
 
                for (p=bus->devices; p; p=p->sibling) {
                }
        }
}
 
void pci_init(void) {
        PPC_DEVICE *hostbridge;
 
        if (pci->last_dev_p) {
                printk("Two or more calls to pci_init!\n");
                return;
        }
        pci->last_dev_p = &(bd->pci_devices);
        hostbridge=residual_find_device(PROCESSORDEVICE, NULL,
                                        BridgeController,
                                        PCIBridge, -1, 0);
        if (hostbridge) {
                if (hostbridge->DeviceId.Interface==PCIBridgeIndirect) {
                        bd->pci_functions=&indirect_functions;
                        /* Should be extracted from residual data,
                         * indeed MPC106 in CHRP mode is different,
                         * but we should not use residual data in
                         * this case anyway.
                         */
                        pci->config_addr = ((volatile u_int *)
                                               (ptr_mem_map->io_base+0xcf8));
                        pci->config_data = ptr_mem_map->io_base+0xcfc;
                } else if(hostbridge->DeviceId.Interface==PCIBridgeDirect) {
                        bd->pci_functions=&direct_functions;
                        pci->config_data=(u_char *) 0x80800000;
                } else {
                }
        } else {
                /* Let us try by experimentation at our own risk! */
                u_int id0;
                bd->pci_functions = &direct_functions;
                /* On all direct bridges I know the host bridge itself
                 * appears as device 0 function 0.
                 */
                pcibios_read_config_dword(0, 0, PCI_VENDOR_ID, &id0);
                if (id0==~0U) {
                        bd->pci_functions = &indirect_functions;
                        pci->config_addr = ((volatile u_int *)
                                               (ptr_mem_map->io_base+0xcf8));
                        pci->config_data = ptr_mem_map->io_base+0xcfc;
                }
                /* Here we should check that the host bridge is actually
                 * present, but if it not, we are in such a desperate
                 * situation, that we probably can't even tell it.
                 */
        }
        /* Now build a small database of all found PCI devices */
        printk("\nPCI: Probing PCI hardware\n");
        pci_root.subordinate=pci_scan_bus(&pci_root);
        print_pci_resources("Configurable PCI resources:\n");
        reconfigure_pci();
        print_pci_resources("Allocated PCI resources:\n");
}
 
Browse

Tools

Subversion Repositories openrisc_me

[/] [openrisc/] [trunk/] [rtos/] [rtems/] [c/] [src/] [lib/] [libbsp/] [powerpc/] [shared/] [bootloader/] [pci.c] - Blame information for rev 173

Line No.	Rev	Author	Line
1	30	unneback	`/*`
2			`* pci.c -- Crude pci handling for early boot.`
3			`*`
4			`* Copyright (C) 1998, 1999 Gabriel Paubert, paubert@iram.es`
5			`*`
6			`* Modified to compile in RTEMS development environment`
7			`* by Eric Valette`
8			`*`
9			`* Copyright (C) 1999 Eric Valette. valette@crf.canon.fr`
10			`*`
11			`* The license and distribution terms for this file may be`
12			`* found in found in the file LICENSE in this distribution or at`
13			`* http://www.OARcorp.com/rtems/license.html.`
14			`*`
15			`* $Id: pci.c,v 1.2 2001-09-27 12:01:06 chris Exp $`
16			`*/`
17
18
19			`#include <sys/types.h>`
20			`#include <libcpu/spr.h>`
21			`#include "bootldr.h"`
22			`#include "pci.h"`
23			`#include <libcpu/io.h>`
24			`#include <bsp/consoleIo.h>`
25
26			`typedef unsigned int u32;`
27
28			`/#define DEBUG/`
29			`/* Used to reorganize PCI space on stupid machines which spread resources`
30			`* across a wide address space. This is bad when P2P bridges are present`
31			`* or when it limits the mappings that a resource hog like a PCI<->VME`
32			`* bridge can use.`
33			`*/`
34
35			`typedef struct _pci_resource {`
36			`struct _pci_resource *next;`
37			`struct pci_dev *dev;`
38			`u_long base; /* will be 64 bits on 64 bits machines */`
39			`u_long size;`
40			`u_char type; /* 1 is I/O else low order 4 bits of the memory type */`