Subversion Repositories openrisc

#

#  Description of SIS as related to this BSP

#

#  $Id: README,v 1.2 2001-09-27 12:01:13 chris Exp $

#

BSP NAME:           sis

BOARD:              any based on the European Space Agency's ERC32

BUS:                N/A

CPU FAMILY:         sparc

CPU:                ERC32 (SPARC V7 + on-CPU peripherals)

                    based on Cypress 601/602

COPROCESSORS:       on-chip 602 compatible FPU

MODE:               32 bit mode

DEBUG MONITOR:      none

PERIPHERALS

===========

TIMERS:

  NAME:             General Purpose Timer

  RESOLUTION:         50 nanoseconds - 12.8 microseconds

  NAME:             Real Time Clock Timer

  RESOLUTION:         50 nanoseconds - 3.2768 milliseconds

  NAME:             Watchdog Timer

  RESOLUTION:         XXX

SERIAL PORTS:       2 using on-chip UART

REAL-TIME CLOCK:    none

DMA:                on-chip

VIDEO:              none

SCSI:               none

NETWORKING:         none

DRIVER INFORMATION

==================

CLOCK DRIVER:       ERC32 internal Real Time Clock Timer

IOSUPP DRIVER:      N/A

SHMSUPP:            N/A

TIMER DRIVER:       ERC32 internal General Purpose Timer

CONSOLE DRIVER:     ERC32 internal UART

STDIO

=====

PORT:               Channel A

ELECTRICAL:         na since using simulator

BAUD:               na

BITS PER CHARACTER: na

PARITY:             na

STOP BITS:          na

Notes

=====

ERC32 BSP only supports single processor operations.

A nice feature of this BSP is that the RAM and PROM size are set in the

linkcmds file and the startup code programs the Memory Configuration

Register based on those sizes.

The Watchdog Timer is disabled.

This code was developed and tested entirely using the SPARC Instruction

Simulator (SIS) for the ERC32.  All tests were known to run correctly

against sis v1.7.

Memory Map

==========

0x00000000 - 0x00000000 + _PROM_SIZE      code and initialized data

0x01f80000                                on chip peripherals

0x00000000 - 0x02000000 + _RAM_SIZE       destination for initialized data

                                          BSS (i.e. unitialized data)

                                          C Heap (i.e. malloc area)

                                          RTEMS Workspace

The C heap is assigned all memory between the end of the BSS and the

RTEMS Workspace.  The size of the RTEMS Workspace is based on that

specified in the application's configuration table.