Subversion Repositories openrisc_me

/*

 *  This file contains the TTY driver table definition

 *

 *  This driver uses the termios pseudo driver.

 *

 *  COPYRIGHT (c) 1989-1999.

 *  On-Line Applications Research Corporation (OAR).

 *

 *  The license and distribution terms for this file may be

 *  found in the file LICENSE in this distribution or at

 *  http://www.OARcorp.com/rtems/license.html.

 *

 *  $Id: serial.h,v 1.2 2001-09-27 12:01:42 chris Exp $

 */

#ifndef __LIBCHIP_SERIAL_h

#define __LIBCHIP_SERIAL_h

#include <termios.h>

/*

 *  Types for get and set register routines

 */

typedef unsigned8 (*getRegister_f)(unsigned32 port, unsigned8 register);

typedef void      (*setRegister_f)(

                            unsigned32 port, unsigned8 reg, unsigned8 value);

typedef unsigned8 (*getData_f)(unsigned32 port);

typedef void      (*setData_f)(unsigned32 port, unsigned8 value);

typedef struct _console_fns {

  boolean (*deviceProbe)(int minor);

  int     (*deviceFirstOpen)(int major, int minor, void *arg);

  int     (*deviceLastClose)(int major, int minor, void *arg);

  int     (*deviceRead)(int minor);

  int     (*deviceWrite)(int minor, const char *buf, int len);

  void    (*deviceInitialize)(int minor);

  void    (*deviceWritePolled)(int minor, char cChar);

  int     (*deviceSetAttributes)(int minor, const struct termios *t);

  int       deviceOutputUsesInterrupts;

} console_fns;

typedef struct _console_flow {

  int (*deviceStopRemoteTx)(int minor);

  int (*deviceStartRemoteTx)(int minor);

} console_flow;

typedef enum {

  SERIAL_MC68681,              /* Motorola MC68681 or Exar 88681 */

  SERIAL_NS16550,              /* National Semiconductor NS16550 */

  SERIAL_Z85C30,               /* Zilog Z85C30 */

  SERIAL_CUSTOM                /* BSP specific driver */

} console_devs;

/*

 * Each field is interpreted thus:

 *

 * sDeviceName  This is the name of the device.

 *

 * deviceType   This indicates the chip type.  It is especially important when

 *              multiple devices share the same interrupt vector and must be

 *              distinguished.

 *

 * pDeviceFns   This is a pointer to the set of driver routines to use.

 *

 * pDeviceFlow  This is a pointer to the set of flow control routines to

 *              use. Serial device drivers will typically supply RTSCTS

 *              and DTRCTS handshake routines for DCE to DCE communication,

 *              however for DCE to DTE communication, no such routines

 *              should be necessary as RTS will be driven automatically

 *              when the transmitter is active.

 *

 * ulMargin     The high water mark in the input buffer is set to the buffer

 *              size less ulMargin. Once this level is reached, the driver's

 *              flow control routine used to stop the remote transmitter will

 *              be called. This figure should be greater than or equal to

 *              the number of stages of FIFO between the transmitter and

 *              receiver.

 *

 *              NOTE: At the current time, this parameter is hard coded

 *                    in termios and this number is ignored.

 *

 * ulHysteresis After the high water mark specified by ulMargin has been

 *              reached, the driver's routine to re-start the remote

 *              transmitter will be called once the level in the input

 *              buffer has fallen by ulHysteresis bytes.

 *

 *              NOTE: At the current time, this parameter is hard coded

 *                    in termios and this number is ignored.

 *

 * pDeviceParams This contains either device specific data or a pointer to a

 *              device specific structure containing additional information

 *              not provided in this table.

 *

 * ulCtrlPort1  This is the primary control port number for the device. This

 *              may be used to specify different instances of the same device

 *              type.

 *

 * ulCtrlPort2  This is the secondary control port number, of use when a given

 *              device has more than one available channel.

 *

 * ulDataPort   This is the port number for the data port of the device

 *

 * getRegister  This is the routine used to read register values.

 *

 * setRegister  This is the routine used to write register values.

 *

 * getData      This is the routine used to read the data register (RX).

 *

 * setData      This is the routine used to write the data register (TX).

 *

 * ulClock      This is the baud rate clock speed.

 *

 * ulIntVector  This encodes the interrupt vector of the device.

 */

typedef struct _console_tbl {

  char          *sDeviceName;

  console_devs   deviceType;

  console_fns   *pDeviceFns;

  boolean      (*deviceProbe)(int minor);

  console_flow  *pDeviceFlow;

  unsigned32     ulMargin;

  unsigned32     ulHysteresis;

  void          *pDeviceParams;

  unsigned32     ulCtrlPort1;

  unsigned32     ulCtrlPort2;

  unsigned32     ulDataPort;

  getRegister_f  getRegister;

  setRegister_f  setRegister;

  getData_f      getData;

  setData_f      setData;

  unsigned32     ulClock;

  unsigned int   ulIntVector;

} console_tbl;

typedef struct _console_data {

  void                   *termios_data;

  volatile boolean        bActive;

  /*

   * This field may be used for any purpose required by the driver

   */

  void                   *pDeviceContext;

} console_data;

extern console_tbl  Console_Port_Tbl[];

extern console_data Console_Port_Data[];

extern unsigned long  Console_Port_Count;

#endif

/* end of include file */