| 1 |
30 |
unneback |
#
|
| 2 |
|
|
# $Id: PROBLEMS,v 1.2 2001-09-27 12:02:07 chris Exp $
|
| 3 |
|
|
#
|
| 4 |
|
|
|
| 5 |
|
|
The tests were designed to operate in a very controlled environment. If
|
| 6 |
|
|
one uses interrupt-driven console output, then tasks will block unexpectedly
|
| 7 |
|
|
when a buffer filles and interrupts will perturb with the task execution order.
|
| 8 |
|
|
|
| 9 |
|
|
The tmtests should only be run with all interrupt sources disabled using
|
| 10 |
|
|
polled IO.
|
| 11 |
|
|
|
| 12 |
|
|
The following is a list of reported failures from running the tests on
|
| 13 |
|
|
a board with interrupt driven console IO. These problems do not
|
| 14 |
|
|
occur when using polled IO.
|
| 15 |
|
|
|
| 16 |
|
|
tm03, tm04, tm05, tm07, tm11, tm12, tm13, tm14, tm15, tm16, tm17,
|
| 17 |
|
|
tm19, tm22, tm23, tm24 - All hit my breakpoint at
|
| 18 |
|
|
_Internal_error_Occurred.
|
| 19 |
|
|
|
| 20 |
|
|
tm20, tm27 - hang in middle of tests.
|
| 21 |
|
|
tm26 - hangs at end of tests.
|
| 22 |
|
|
|
| 23 |
|
|
sp02 - Gets through some tests, then attempts to execute code at
|
| 24 |
|
|
location 0.
|
| 25 |
|
|
sp04 - hangs at end of tests.
|
| 26 |
|
|
sp06 - rtems_task_restart of TA3 FAILED -- expected (0) got (4)
|
| 27 |
|
|
sp07, sp14 - hang in middle of tests
|
| 28 |
|
|
sp13, sp15 - terminate properly, but output at end is missing.
|
| 29 |
|
|
sp16 - _Internal_error_Occurred.
|
| 30 |
|
|
sp19 - rtems_clock_get FAILED -- expected (0) got (11), and hangs in
|
| 31 |
|
|
middle of test.
|
| 32 |
|
|
|
| 33 |
|
|
cpuuse - hangs in middle of tests
|
| 34 |
|
|
malloctest - prints nothing
|
| 35 |
|
|
|
| 36 |
|
|
psx05 - Init: pthread_mutex_init - EINVAL (bad protocol)
|
| 37 |
|
|
../../../../../../../src/rtems-981001/c/src/tests/psxtests/psx05/../../../../../
|
| 38 |
|
|
../../src/rtems-981001/c/src/tests/psxtests/psx05/task.c:35:
|
| 39 |
|
|
failed assertion `status == EBUSY'
|
| 40 |
|
|
N\: pthread_mutex_init - EINVAL (bad priority ceiling)
|
| 41 |
|
|
|
| 42 |
|
|
|
