Subversion Repositories openrisc_2011-10-31

#

#  $Id: PROBLEMS,v 1.2 2001-09-27 12:02:07 chris Exp $

#

The tests were designed to operate in a very controlled environment.  If

one uses interrupt-driven console output, then tasks will block unexpectedly

when a buffer filles and interrupts will perturb with the task execution order.

The tmtests should only be run with all interrupt sources disabled using

polled IO.

The following is a list of reported failures from running the tests on

a board with interrupt driven console IO.  These problems do not

occur when using polled IO.

tm03, tm04, tm05, tm07, tm11, tm12, tm13, tm14, tm15, tm16, tm17,

tm19, tm22, tm23, tm24 - All hit my breakpoint at

_Internal_error_Occurred.

tm20, tm27 - hang in middle of tests.

tm26 - hangs at end of tests.

sp02 - Gets through some tests, then attempts to execute code at

location 0.

sp04 - hangs at end of tests.

sp06 - rtems_task_restart of TA3 FAILED -- expected (0) got (4)

sp07, sp14 - hang in middle of tests

sp13, sp15 - terminate properly, but output at end is missing.

sp16 - _Internal_error_Occurred.

sp19 - rtems_clock_get FAILED -- expected (0) got (11), and hangs in

middle of test.

cpuuse - hangs in middle of tests

malloctest - prints nothing

psx05 - Init: pthread_mutex_init - EINVAL (bad protocol)

../../../../../../../src/rtems-981001/c/src/tests/psxtests/psx05/../../../../../

../../src/rtems-981001/c/src/tests/psxtests/psx05/task.c:35:

failed assertion `status == EBUSY'

N\: pthread_mutex_init - EINVAL (bad priority ceiling)