Subversion Repositories openrisc_2011-10-31

#

#  Config file for a PowerPC 403 based helas403 card

#

#  $Id: helas403.cfg,v 1.2 2001-09-27 12:02:52 chris Exp $

#

#  this is derived from:

#

#  Config file for a PowerPC 403 based papyrus card

#

#  Id: papyrus.cfg,v 1.7 1998/06/27 17:09:47 joel Exp

#

include $(RTEMS_ROOT)/make/custom/default.cfg

RTEMS_CPU=powerpc

RTEMS_CPU_MODEL=ppc403

# This is the actual bsp directory used during the build process.

RTEMS_BSP_FAMILY=helas403

#  This section makes the target dependent options file.

#  NDEBUG (C library)

#     if defined asserts do not generate code.  This is commonly used

#     as a command line option.

#

#  RTEMS_TEST_NO_PAUSE (RTEMS tests)

#     do not pause between screens of output in the rtems tests

#

#  RTEMS_DEBUG (RTEMS)

#     If defined, debug checks in RTEMS and support library code are enabled.

#

#

#  PPC_VECTOR_FILE_BASE (PowerPC)

#     This defines the base address of the exception table.

#     NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100

#

#  PPC_USE_SPRG (RTEMS PowerPC port)

#     If defined, then the PowerPC specific code in RTEMS will use some

#     of the special purpose registers to slightly optimize interrupt

#     response time.  The use of these registers can conflict with

#     other tools like debuggers.

define make-target-options

        @echo "/* #define NDEBUG 1 */ "                     >>$@

        @echo "#define RTEMS_TEST_NO_PAUSE 1"               >>$@

        @echo "/* #define RTEMS_DEBUG  1 */"                >>$@

        @echo "#define PPC_VECTOR_FILE_BASE 0x0100"         >>$@

        @echo "#define PPC_USE_SPRG 1"                      >>$@

endef

#  This contains the compiler options necessary to select the CPU model

#  and (hopefully) optimize for it.

#

CPU_CFLAGS = -mcpu=403

# optimize flag: typically -0, could use -O4 or -fast

# -O4 is ok for RTEMS

# NOTE: some level of -O may be actually required by inline assembler

CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions

# No start file

START_BASE=

# The following are definitions of make-exe which will work using ld as

# is currently required.  It is expected that as of gcc 2.8, the end user

# will be able to override parts of the compilers specs and link using gcc.

ifeq ($(RTEMS_USE_GCC272),yes)

# The --defsym arguments define arguments which are required by the linkcmds

# file which is designed for gcc 2.8

define make-exe

        $(LD) $(XLDFLAGS) -T $(LINKCMDS) \

            --defsym __fini=0 --defsym __init=0 \

            -o $@ -u atexit -u __vectors -u download_entry \

            $(START_FILE) $(LINK_OBJS) --start-group $(LINK_LIBS) --end-group

        $(NM) -g -n $@ > $(basename $@).num

        $(SIZE) $@

endef

else

define make-exe

        $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) -o $(basename $@).exe \

            $(LINK_OBJS) $(LINK_LIBS)

        $(NM) -g -n $@ > $(basename $@).num

        $(SIZE) $@

endef

endif

# Miscellaneous additions go here