Subversion Repositories openrisc

#

#  Config file for a PowerPC 603e based Vista VMEbus Single Board Computer.

#  This BSP should work with the following models:

#

#     + Vista SCORE 603e

#

#  $Id: score603e.cfg,v 1.2 2001-09-27 12:02:52 chris Exp $

#

RTEMS_CPU=powerpc

RTEMS_CPU_MODEL=ppc603e

# Set the default generation if it has not been overridden

ifeq ($(SCORE603E_GENERATION),)

SCORE603E_GENERATION=2

endif

# This is the actual bsp directory used during the build process.

RTEMS_BSP_FAMILY=score603e

ifeq ($(SCORE603E_GENERATION),1)

RTEMS_BSP=score603e_g1

else

ifeq ($(SCORE603E_GENERATION),2)

RTEMS_BSP=score603e

endif # generation 2

endif # generation 1

include $(RTEMS_ROOT)/make/custom/default.cfg

#  This section makes the target dependent options file.

#  NDEBUG (C library)

#     if defined asserts do not generate code.  This is commonly used

#     as a command line option.

#

#  RTEMS_TEST_NO_PAUSE (RTEMS tests)

#     do not pause between screens of output in the rtems tests

#

#  RTEMS_DEBUG (RTEMS)

#     If defined, debug checks in RTEMS and support library code are enabled.

#

#  CONSOLE_USE_POLLED     (score603e_bsp)

#  CONSOLE_USE_INTERRUPTS (score603e_bsp)

#     The score603e console driver has the structure to operate in either

#     polled or interrupt mode.  However both modes only trap to the

#     monitor currently.

#

#  SCORE603E_USE_SDS           (score603e_bsp)

#  SCORE603E_USE_OPEN_FIRMWARE (score603e_bsp)

#  SCORE603E_USE_NONE          (score603e_bsp)

#     The Score603e board can be configured with 3 ROM monitors.  Only two

#     are appropriate for use with RTEMS.  Set exactly one of these to "1"

#     to indicate which ROM monitor is on the board you are using.

#

#  PPC_VECTOR_FILE_BASE (ppc)

#     This defines the base address of the exception table.

#     NOTE: Vectors are actually at 0xFFF00000 but file starts at offset 0x0100

#

#  PPC_USE_SPRG (RTEMS PowerPC port)

#     If defined, then the PowerPC specific code in RTEMS will use some

#     of the special purpose registers to slightly optimize interrupt

#     response time.  The use of these registers can conflict with

#     other tools like debuggers.

#

#  PPC_USE_DATA_CACHE (RTEMS PowerPC port)

#     If defined, then the PowerPC specific code in RTEMS will use

#     data cache instructions to optimize the context switch code.

#     This code can conflict with debuggers or emulators.

#

define make-target-options

        @echo "/* #define NDEBUG 1 */ "                              >>$@

        @echo "#define RTEMS_TEST_NO_PAUSE 1"                        >>$@

        @echo "/* #define RTEMS_DEBUG  1 */"                         >>$@

        @echo "#define CONSOLE_USE_INTERRUPTS 0"                     >>$@

        @echo "#define INITIALIZE_COM_PORTS 1"                       >>$@

        @echo "#define SCORE603E_GENERATION $(SCORE603E_GENERATION)" >>$@

        @echo "#define SCORE603E_USE_SDS  0"                         >>$@

        @echo "#define SCORE603E_USE_NONE 0"                         >>$@

        @echo "#define SCORE603E_USE_DINK 1"                         >>$@

        @echo "#define SCORE603E_USE_OPEN_FIRMWARE 0"                >>$@

        @echo "#define PPC_USE_DATA_CACHE 0"                         >>$@

        @echo "#define PPC_VECTOR_FILE_BASE 0x0100"                  >>$@

        @echo "#define PPC_USE_SPRG  0"                              >>$@

        @echo "#define HAS_PMC_PSC8  0"                              >>$@

endef

#  This contains the compiler options necessary to select the CPU model

#  and (hopefully) optimize for it.

#

CPU_CFLAGS = -mcpu=603

# optimize flag: typically -0, could use -O4 or -fast

# -O4 is ok for RTEMS

# NOTE: some level of -O may be actually required by inline assembler

CFLAGS_OPTIMIZE_V=-O4 -fno-keep-inline-functions

# CFLAGS_OPTIMIZE_V=-O0

# The following is a linkcmds file which will work without using the

# -specs system in gcc 2.8.

#       $(LD) $(XLDFLAGS) -T $(LINKCMDS) \

#         -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)

#       $(LD) $(XLDFLAGS) -Ttext 0x20000 \

#         -o $@ -u atexit -u __vectors -u download_entry $(LINK_FILES)

ifeq ($(RTEMS_USE_GCC272),yes)

define make-exe

        @echo gcc 2.7.2 style linking not supported by score603e

        @exit 1

endef

else

define make-exe

        $(LINK.c) $(AM_CFLAGS) $(AM_LDFLAGS) \

            -o $(basename $@).elf $(LINK_OBJS) $(LINK_LIBS)

        $(NM) -g -n $(basename $@).elf > $(basename $@).num

        $(SIZE) $(basename $@).elf

        $(OBJCOPY) -O srec $(basename $@).elf $(basename $@).s1

        sed -e 's/.$$//' $(basename $@).s1 | \

          $(PACKHEX) >$(basename $@).exe

        rm -f $(basename $@).s1

endef

endif

# Miscellaneous additions go here

DRIVER_ARCHITECTURE=vmebus