Subversion Repositories or1200_hp

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  OR1200's reg2mem aligner                                    ////

////                                                              ////

////  This file is part of the OpenRISC 1200 project              ////

////  http://www.opencores.org/cores/or1k/                        ////

////                                                              ////

////  Description                                                 ////

////  Aligns register data to memory alignment.                   ////

////                                                              ////

////  To Do:                                                      ////

////   - make it smaller and faster                               ////

////                                                              ////

////  Author(s):                                                  ////

////      - Damjan Lampret, lampret@opencores.org                 ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

// CVS Revision History

//

// $Log: not supported by cvs2svn $

// Revision 1.1  2002/01/03 08:16:15  lampret

// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.

//

// Revision 1.9  2001/10/21 17:57:16  lampret

// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.

//

// Revision 1.8  2001/10/19 23:28:46  lampret

// Fixed some synthesis warnings. Configured with caches and MMUs.

//

// Revision 1.7  2001/10/14 13:12:10  lampret

// MP3 version.

//

// Revision 1.1.1.1  2001/10/06 10:18:36  igorm

// no message

//

// Revision 1.2  2001/08/09 13:39:33  lampret

// Major clean-up.

//

// Revision 1.1  2001/07/20 00:46:21  lampret

// Development version of RTL. Libraries are missing.

//

//

// synopsys translate_off

`include "timescale.v"

// synopsys translate_on

`include "or1200_defines.v"

module or1200_reg2mem_cm3(

                clk_i_cml_1,

                clk_i_cml_2,

                addr, lsu_op, regdata, memdata);

input clk_i_cml_1;

input clk_i_cml_2;

reg [ 1 : 0 ] addr_cml_2;

reg [ 4 - 1 : 0 ] lsu_op_cml_2;

reg [ 4 - 1 : 0 ] lsu_op_cml_1;

reg [ 32 - 1 : 0 ] regdata_cml_2;

reg [ 32 - 1 : 0 ] regdata_cml_1;

parameter width = `OR1200_OPERAND_WIDTH;

//

// I/O

//

input   [1:0]                    addr;

input   [`OR1200_LSUOP_WIDTH-1:0]        lsu_op;

input   [width-1:0]              regdata;

output  [width-1:0]              memdata;

//

// Internal regs and wires

//

reg     [7:0]                    memdata_hh;

reg     [7:0]                    memdata_hl;

reg     [7:0]                    memdata_lh;

reg     [7:0]                    memdata_ll;

assign memdata = {memdata_hh, memdata_hl, memdata_lh, memdata_ll};

//

// Mux to memdata[31:24]

//

// SynEDA CoreMultiplier

// assignment(s): memdata_hh

// replace(s): addr, lsu_op, regdata

always @(lsu_op_cml_2 or addr_cml_2 or regdata_cml_2) begin

        casex({lsu_op_cml_2, addr_cml_2[1:0]})   // synopsys parallel_case

                {`OR1200_LSUOP_SB, 2'b00} : memdata_hh = regdata_cml_2[7:0];

                {`OR1200_LSUOP_SH, 2'b00} : memdata_hh = regdata_cml_2[15:8];

                default : memdata_hh = regdata_cml_2[31:24];

        endcase

end

//

// Mux to memdata[23:16]

//

// SynEDA CoreMultiplier

// assignment(s): memdata_hl

// replace(s): addr, lsu_op, regdata

always @(lsu_op_cml_2 or addr_cml_2 or regdata_cml_2) begin

        casex({lsu_op_cml_2, addr_cml_2[1:0]})   // synopsys parallel_case

                {`OR1200_LSUOP_SW, 2'b00} : memdata_hl = regdata_cml_2[23:16];

                default : memdata_hl = regdata_cml_2[7:0];

        endcase

end

//

// Mux to memdata[15:8]

//

// SynEDA CoreMultiplier

// assignment(s): memdata_lh

// replace(s): addr, lsu_op, regdata

always @(lsu_op_cml_2 or addr_cml_2 or regdata_cml_2) begin

        casex({lsu_op_cml_2, addr_cml_2[1:0]})   // synopsys parallel_case

                {`OR1200_LSUOP_SB, 2'b10} : memdata_lh = regdata_cml_2[7:0];

                default : memdata_lh = regdata_cml_2[15:8];

        endcase

end

//

// Mux to memdata[7:0]

//

// SynEDA CoreMultiplier

// assignment(s): memdata_ll

// replace(s): regdata

always @(regdata_cml_2)

        memdata_ll = regdata_cml_2[7:0];

always @ (posedge clk_i_cml_1) begin

lsu_op_cml_1 <= lsu_op;

regdata_cml_1 <= regdata;

end

always @ (posedge clk_i_cml_2) begin

addr_cml_2 <= addr;

lsu_op_cml_2 <= lsu_op_cml_1;

regdata_cml_2 <= regdata_cml_1;

end

endmodule