Subversion Repositories or1k

//////////////////////////////////////////////////////////////////////

////                                                              ////

////  OR1200's Top level multiplier and MAC                       ////

////                                                              ////

////  This file is part of the OpenRISC 1200 project              ////

////  http://www.opencores.org/cores/or1k/                        ////

////                                                              ////

////  Description                                                 ////

////  Multiplier is 32x32 however multiply instructions only      ////

////  use lower 32 bits of the result. MAC is 32x32=64+64.        ////

////                                                              ////

////  To Do:                                                      ////

////   - make signed division better, w/o negating the operands   ////

////                                                              ////

////  Author(s):                                                  ////

////      - Damjan Lampret, lampret@opencores.org                 ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

////                                                              ////

//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////

////                                                              ////

//// This source file may be used and distributed without         ////

//// restriction provided that this copyright statement is not    ////

//// removed from the file and that any derivative work contains  ////

//// the original copyright notice and the associated disclaimer. ////

////                                                              ////

//// This source file is free software; you can redistribute it   ////

//// and/or modify it under the terms of the GNU Lesser General   ////

//// Public License as published by the Free Software Foundation; ////

//// either version 2.1 of the License, or (at your option) any   ////

//// later version.                                               ////

////                                                              ////

//// This source is distributed in the hope that it will be       ////

//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////

//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////

//// PURPOSE.  See the GNU Lesser General Public License for more ////

//// details.                                                     ////

////                                                              ////

//// You should have received a copy of the GNU Lesser General    ////

//// Public License along with this source; if not, download it   ////

//// from http://www.opencores.org/lgpl.shtml                     ////

////                                                              ////

//////////////////////////////////////////////////////////////////////

//

// CVS Revision History

//

// $Log: not supported by cvs2svn $

// Revision 1.2  2002/09/08 05:52:16  lampret

// Added optional l.div/l.divu insns. By default they are disabled.

//

// Revision 1.1  2002/01/03 08:16:15  lampret

// New prefixes for RTL files, prefixed module names. Updated cache controllers and MMUs.

//

// Revision 1.3  2001/10/21 17:57:16  lampret

// Removed params from generic_XX.v. Added translate_off/on in sprs.v and id.v. Removed spr_addr from dc.v and ic.v. Fixed CR+LF.

//

// Revision 1.2  2001/10/14 13:12:09  lampret

// MP3 version.

//

// Revision 1.1.1.1  2001/10/06 10:18:38  igorm

// no message

//

//

// synopsys translate_off

`include "timescale.v"

// synopsys translate_on

`include "or1200_defines.v"

module or1200_mult_mac(

        // Clock and reset

        clk, rst,

        // Multiplier/MAC interface

        ex_freeze, id_macrc_op, macrc_op, a, b, mac_op, alu_op, result, mac_stall_r,

        // SPR interface

        spr_cs, spr_write, spr_addr, spr_dat_i, spr_dat_o

);

parameter width = `OR1200_OPERAND_WIDTH;

//

// I/O

//

//

// Clock and reset

//

input                           clk;

input                           rst;

//

// Multiplier/MAC interface

//

input                           ex_freeze;

input                           id_macrc_op;

input                           macrc_op;

input   [width-1:0]              a;

input   [width-1:0]              b;

input   [`OR1200_MACOP_WIDTH-1:0]        mac_op;

input   [`OR1200_ALUOP_WIDTH-1:0]        alu_op;

output  [width-1:0]              result;

output                          mac_stall_r;

//

// SPR interface

//

input                           spr_cs;

input                           spr_write;

input   [31:0]                   spr_addr;

input   [31:0]                   spr_dat_i;

output  [31:0]                   spr_dat_o;

//

// Internal wires and regs

//

`ifdef OR1200_MULT_IMPLEMENTED

reg     [width-1:0]              result;

reg     [2*width-1:0]            mul_prod_r;

`else

wire    [width-1:0]              result;

wire    [2*width-1:0]            mul_prod_r;

`endif

wire    [2*width-1:0]            mul_prod;

wire    [`OR1200_MACOP_WIDTH-1:0]        mac_op;

`ifdef OR1200_MAC_IMPLEMENTED

reg     [`OR1200_MACOP_WIDTH-1:0]        mac_op_r1;

reg     [`OR1200_MACOP_WIDTH-1:0]        mac_op_r2;

reg     [`OR1200_MACOP_WIDTH-1:0]        mac_op_r3;

reg                             mac_stall_r;

reg     [2*width-1:0]            mac_r;

`else

wire    [`OR1200_MACOP_WIDTH-1:0]        mac_op_r1;

wire    [`OR1200_MACOP_WIDTH-1:0]        mac_op_r2;

wire    [`OR1200_MACOP_WIDTH-1:0]        mac_op_r3;

wire                            mac_stall_r;

wire    [2*width-1:0]            mac_r;

`endif

wire    [width-1:0]              x;

wire    [width-1:0]              y;

wire                            spr_maclo_we;

wire                            spr_machi_we;

wire                            alu_op_div_divu;

wire                            alu_op_div;

reg                             div_free;

`ifdef OR1200_IMPL_DIV

wire    [width-1:0]              div_tmp;

reg     [5:0]                    div_cntr;

`endif

//

// Combinatorial logic

//

`ifdef OR1200_MAC_IMPLEMENTED

assign spr_maclo_we = spr_cs & spr_write & spr_addr[`OR1200_MAC_ADDR];

assign spr_machi_we = spr_cs & spr_write & !spr_addr[`OR1200_MAC_ADDR];

assign spr_dat_o = spr_addr[`OR1200_MAC_ADDR] ? mac_r[31:0] : mac_r[63:32];

`else

assign spr_maclo_we = 1'b0;

assign spr_machi_we = 1'b0;

assign spr_dat_o = 32'h0000_0000;

`endif

`ifdef OR1200_LOWPWR_MULT

assign x = (alu_op_div & a[31]) ? ~a + 1'b1 : alu_op_div_divu | (alu_op == `OR1200_ALUOP_MUL) | (|mac_op) ? a : 32'h0000_0000;

assign y = (alu_op_div & b[31]) ? ~b + 1'b1 : alu_op_div_divu | (alu_op == `OR1200_ALUOP_MUL) | (|mac_op) ? b : 32'h0000_0000;

`else

assign x = alu_op_div & a[31] ? ~a + 1'b1 : a;

assign y = alu_op_div & b[31] ? ~b + 1'b1 : b;

`endif

`ifdef OR1200_IMPL_DIV

assign alu_op_div = (alu_op == `OR1200_ALUOP_DIV);

assign alu_op_div_divu = alu_op_div | (alu_op == `OR1200_ALUOP_DIVU);

assign div_tmp = mul_prod_r[63:32] - y;

`else

assign alu_op_div = 1'b0;

assign alu_op_div_divu = 1'b0;

`endif

`ifdef OR1200_MULT_IMPLEMENTED

//

// Select result of current ALU operation to be forwarded

// to next instruction and to WB stage

//

always @(alu_op or mul_prod_r or mac_r or a or b)

        casex(alu_op)   // synopsys parallel_case

`ifdef OR1200_IMPL_DIV

                `OR1200_ALUOP_DIV:

                        result = a[31] ^ b[31] ? ~mul_prod_r[31:0] + 1'b1 : mul_prod_r[31:0];

                `OR1200_ALUOP_DIVU,

`endif

                `OR1200_ALUOP_MUL: begin

                        result = mul_prod_r[31:0];

                end

                default:

                        result = mac_r[59:28];

        endcase

//

// Instantiation of the multiplier

//

`ifdef OR1200_ASIC_MULTP2_32X32

or1200_amultp2_32x32 or1200_amultp2_32x32(

        .X(x),

        .Y(y),

        .RST(rst),

        .CLK(clk),

        .P(mul_prod)

);

`else // OR1200_ASIC_MULTP2_32X32

or1200_gmultp2_32x32 or1200_gmultp2_32x32(

        .X(x),

        .Y(y),

        .RST(rst),

        .CLK(clk),

        .P(mul_prod)

);

`endif // OR1200_ASIC_MULTP2_32X32

//

// Registered output from the multiplier and

// an optional divider

//

always @(posedge rst or posedge clk)

        if (rst) begin

                mul_prod_r <= #1 64'h0000_0000_0000_0000;

                div_free <= #1 1'b1;

`ifdef OR1200_IMPL_DIV

                div_cntr <= #1 6'b00_0000;

`endif

        end

`ifdef OR1200_IMPL_DIV

        else if (|div_cntr) begin

                if (div_tmp[31])

                        mul_prod_r <= #1 {mul_prod_r[62:0], 1'b0};

                else

                        mul_prod_r <= #1 {div_tmp[30:0], mul_prod_r[31:0], 1'b1};

                div_cntr <= #1 div_cntr - 1'b1;

        end

        else if (alu_op_div_divu && div_free) begin

                mul_prod_r <= #1 {31'b0, x[31:0], 1'b0};

                div_cntr <= #1 6'b10_0000;

                div_free <= #1 1'b0;

        end

`endif // OR1200_IMPL_DIV

        else if (div_free | !ex_freeze) begin

                mul_prod_r <= #1 mul_prod[63:0];

                div_free <= #1 1'b1;

        end

`else // OR1200_MULT_IMPLEMENTED

assign result = {width{1'b0}};

assign mul_prod = {2*width{1'b0}};

assign mul_prod_r = {2*width{1'b0}};

`endif // OR1200_MULT_IMPLEMENTED

`ifdef OR1200_MAC_IMPLEMENTED

//

// Propagation of l.mac opcode

//

always @(posedge clk or posedge rst)

        if (rst)

                mac_op_r1 <= #1 `OR1200_MACOP_WIDTH'b0;

        else

                mac_op_r1 <= #1 mac_op;

//

// Propagation of l.mac opcode

//

always @(posedge clk or posedge rst)

        if (rst)

                mac_op_r2 <= #1 `OR1200_MACOP_WIDTH'b0;

        else

                mac_op_r2 <= #1 mac_op_r1;

//

// Propagation of l.mac opcode

//

always @(posedge clk or posedge rst)

        if (rst)

                mac_op_r3 <= #1 `OR1200_MACOP_WIDTH'b0;

        else

                mac_op_r3 <= #1 mac_op_r2;

//

// Implementation of MAC

//

always @(posedge rst or posedge clk)

        if (rst)

                mac_r <= #1 64'h0000_0000_0000_0000;

`ifdef OR1200_MAC_SPR_WE

        else if (spr_maclo_we)

                mac_r[31:0] <= #1 spr_dat_i;

        else if (spr_machi_we)

                mac_r[63:32] <= #1 spr_dat_i;

`endif

        else if (mac_op_r3 == `OR1200_MACOP_MAC)

                mac_r <= #1 mac_r + mul_prod_r;

        else if (mac_op_r3 == `OR1200_MACOP_MSB)

                mac_r <= #1 mac_r - mul_prod_r;

        else if (macrc_op & !ex_freeze)

                mac_r <= #1 64'h0000_0000_0000_0000;

//

// Stall CPU if l.macrc is in ID and MAC still has to process l.mac instructions

// in EX stage (e.g. inside multiplier)

// This stall signal is also used by the divider.

//

always @(posedge rst or posedge clk)

        if (rst)

                mac_stall_r <= #1 1'b0;

        else

                mac_stall_r <= #1 (|mac_op | (|mac_op_r1) | (|mac_op_r2)) & id_macrc_op

`ifdef OR1200_IMPL_DIV

                                | (|div_cntr)

`endif

                                ;

`else // OR1200_MAC_IMPLEMENTED

assign mac_stall_r = 1'b0;

assign mac_r = {2*width{1'b0}};

assign mac_op_r1 = `OR1200_MACOP_WIDTH'b0;

assign mac_op_r2 = `OR1200_MACOP_WIDTH'b0;

assign mac_op_r3 = `OR1200_MACOP_WIDTH'b0;

`endif // OR1200_MAC_IMPLEMENTED

endmodule