URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [branches/] [mp3_stable/] [or1200/] [rtl/] [verilog/] [sprs.v] - Blame information for rev 209

Go to most recent revision | Details | Compare with Previous | View Log


//////////////////////////////////////////////////////////////////////
////                                                              ////
////  OR1200's interface to SPRs                                  ////
////                                                              ////
////  This file is part of the OpenRISC 1200 project              ////
////  http://www.opencores.org/cores/or1k/                        ////
////                                                              ////
////  Description                                                 ////
////  Decoding of SPR addresses and access to SPRs                ////
////                                                              ////
////  To Do:                                                      ////
////   - make it smaller and faster                               ////
////                                                              ////
////  Author(s):                                                  ////
////      - Damjan Lampret, lampret@opencores.org                 ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
////                                                              ////
//// Copyright (C) 2000 Authors and OPENCORES.ORG                 ////
////                                                              ////
//// This source file may be used and distributed without         ////
//// restriction provided that this copyright statement is not    ////
//// removed from the file and that any derivative work contains  ////
//// the original copyright notice and the associated disclaimer. ////
////                                                              ////
//// This source file is free software; you can redistribute it   ////
//// and/or modify it under the terms of the GNU Lesser General   ////
//// Public License as published by the Free Software Foundation; ////
//// either version 2.1 of the License, or (at your option) any   ////
//// later version.                                               ////
////                                                              ////
//// This source is distributed in the hope that it will be       ////
//// useful, but WITHOUT ANY WARRANTY; without even the implied   ////
//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR      ////
//// PURPOSE.  See the GNU Lesser General Public License for more ////
//// details.                                                     ////
////                                                              ////
//// You should have received a copy of the GNU Lesser General    ////
//// Public License along with this source; if not, download it   ////
//// from http://www.opencores.org/lgpl.shtml                     ////
////                                                              ////
//////////////////////////////////////////////////////////////////////
//
// CVS Revision History
//
// $Log: not supported by cvs2svn $
// Revision 1.3  2001/08/13 03:36:20  lampret
// Added cfg regs. Moved all defines into one defines.v file. More cleanup.
//
// Revision 1.2  2001/08/09 13:39:33  lampret
// Major clean-up.
//
// Revision 1.1  2001/07/20 00:46:21  lampret
// Development version of RTL. Libraries are missing.
//
//
 
`include "timescale.v"
`include "defines.v"
 
module sprs(
                // Clk & Rst
                clk, rst,
 
                // Internal CPU interface
                flag, addrbase, addrofs, dat_i, alu_op, branch_op,
                epcr, eear, esr, except_start, except_started,
                to_wbmux, epcr_we, eear_we, esr_we, sr,
                spr_dat_cfgr, spr_dat_rf,
 
                // From/to other RISC units
                spr_dat_pic, spr_dat_tt, spr_dat_pm,
                spr_dat_dmmu, spr_dat_immu, spr_dat_du,
                spr_addr, spr_dataout, spr_cs, spr_we,
 
                du_addr, du_dat_du, du_read,
                du_write
 
);
 
parameter width = `OPERAND_WIDTH;
 
//
// I/O Ports
//
 
//
// Internal CPU interface
//
input                           clk;            // Clock
input                           rst;            // Reset
input                           flag;           // From ALU
input   [width-1:0]              addrbase;       // SPR base address
input   [15:0]                   addrofs;        // SPR offset
input   [width-1:0]              dat_i;          // SPR write data
input   [`ALUOP_WIDTH-1:0]       alu_op;         // ALU operation
input   [`BRANCHOP_WIDTH-1:0]    branch_op;      // Branch operation
input   [width-1:0]              epcr;           // EPCR0
input   [width-1:0]              eear;           // EEAR0
input   [`SR_WIDTH-1:0]  esr;            // ESR0
input                           except_start;   // Start of exception
input                           except_started; // Exception was started
output  [width-1:0]              to_wbmux;       // For l.mfspr
output                          epcr_we;        // EPCR0 write enable
output                          eear_we;        // EEAR0 write enable
output                          esr_we;         // ESR0 write enable
output  [`SR_WIDTH-1:0]          sr;             // SR
input   [31:0]                   spr_dat_cfgr;   // Data from CFGR
input   [31:0]                   spr_dat_rf;     // Data from RF
 
//
// To/from other RISC units
//
input   [31:0]                   spr_dat_pic;    // Data from PIC
input   [31:0]                   spr_dat_tt;     // Data from TT
input   [31:0]                   spr_dat_pm;     // Data from PM
input   [31:0]                   spr_dat_dmmu;   // Data from DMMU
input   [31:0]                   spr_dat_immu;   // Data from IMMU
input   [31:0]                   spr_dat_du;     // Data from DU
output  [31:0]                   spr_addr;       // SPR Address
output  [31:0]                   spr_dataout;    // Data to unit
output  [31:0]                   spr_cs;         // Unit select
output                          spr_we;         // SPR write enable
 
//
// To/from Debug Unit
//
input   [width-1:0]              du_addr;        // Address
input   [width-1:0]              du_dat_du;      // Data from DU to SPRS
input                           du_read;        // Read qualifier
input                           du_write;       // Write qualifier
 
//
// Internal regs & wires
//
reg     [`SR_WIDTH-1:0]          sr;             // SR
reg                             write_spr;      // Write SPR
reg                             read_spr;       // Read SPR
reg     [width-1:0]              to_wbmux;       // For l.mfspr
wire                            sr_we;          // Write enable SR
wire                            cfgr_sel;       // Select for cfg regs
wire                            rf_sel;         // Select for RF
wire                            sr_sel;         // Select for SR        
wire                            epcr_sel;       // Select for EPCR0
wire                            eear_sel;       // Select for EEAR0
wire                            esr_sel;        // Select for ESR0
wire    [31:0]                   sys_data;       // Read data from system SPRs
wire    [`SR_WIDTH-1:0]          to_sr;          // Data to SR
wire                            du_access;      // Debug unit access
wire    [`ALUOP_WIDTH-1:0]       sprs_op;        // ALU operation
reg     [31:0]                   unqualified_cs; // Unqualified chip selects
 
//
// Decide if it is debug unit access
//
assign du_access = du_read | du_write;
 
//
// Generate sprs opcode
//
assign sprs_op = du_write ? `ALUOP_MTSR : du_read ? `ALUOP_MFSR : alu_op;
 
//
// Generate SPR address from base address and offset
// OR from debug unit address
//
assign spr_addr = du_access ? du_addr : addrbase + {16'h0000, addrofs};
 
//
// SPR is written with dat_i from l.mtspr
// OR by debug unit
//
assign spr_dataout = du_access ? du_dat_du : dat_i;
 
//
// Write into SPRs when l.mtspr
//
assign spr_we = du_write | write_spr;
 
//
// Qualify chip selects
//
assign spr_cs = unqualified_cs & {32{read_spr | write_spr}};
 
//
// Decoding of groups
//
always @(spr_addr)
        case (spr_addr[`SPR_GROUP_BITS])        // synopsys parallel_case
                `SPR_GROUP_WIDTH'd00: unqualified_cs = 32'b00000000_00000000_00000000_00000001;
                `SPR_GROUP_WIDTH'd01: unqualified_cs = 32'b00000000_00000000_00000000_00000010;
                `SPR_GROUP_WIDTH'd02: unqualified_cs = 32'b00000000_00000000_00000000_00000100;
                `SPR_GROUP_WIDTH'd03: unqualified_cs = 32'b00000000_00000000_00000000_00001000;
                `SPR_GROUP_WIDTH'd04: unqualified_cs = 32'b00000000_00000000_00000000_00010000;
                `SPR_GROUP_WIDTH'd05: unqualified_cs = 32'b00000000_00000000_00000000_00100000;
                `SPR_GROUP_WIDTH'd06: unqualified_cs = 32'b00000000_00000000_00000000_01000000;
                `SPR_GROUP_WIDTH'd07: unqualified_cs = 32'b00000000_00000000_00000000_10000000;
                `SPR_GROUP_WIDTH'd08: unqualified_cs = 32'b00000000_00000000_00000001_00000000;
                `SPR_GROUP_WIDTH'd09: unqualified_cs = 32'b00000000_00000000_00000010_00000000;
                `SPR_GROUP_WIDTH'd10: unqualified_cs = 32'b00000000_00000000_00000100_00000000;
                `SPR_GROUP_WIDTH'd11: unqualified_cs = 32'b00000000_00000000_00001000_00000000;
                `SPR_GROUP_WIDTH'd12: unqualified_cs = 32'b00000000_00000000_00010000_00000000;
                `SPR_GROUP_WIDTH'd13: unqualified_cs = 32'b00000000_00000000_00100000_00000000;
                `SPR_GROUP_WIDTH'd14: unqualified_cs = 32'b00000000_00000000_01000000_00000000;
                `SPR_GROUP_WIDTH'd15: unqualified_cs = 32'b00000000_00000000_10000000_00000000;
                `SPR_GROUP_WIDTH'd16: unqualified_cs = 32'b00000000_00000001_00000000_00000000;
                `SPR_GROUP_WIDTH'd17: unqualified_cs = 32'b00000000_00000010_00000000_00000000;
                `SPR_GROUP_WIDTH'd18: unqualified_cs = 32'b00000000_00000100_00000000_00000000;
                `SPR_GROUP_WIDTH'd19: unqualified_cs = 32'b00000000_00001000_00000000_00000000;
                `SPR_GROUP_WIDTH'd20: unqualified_cs = 32'b00000000_00010000_00000000_00000000;
                `SPR_GROUP_WIDTH'd21: unqualified_cs = 32'b00000000_00100000_00000000_00000000;
                `SPR_GROUP_WIDTH'd22: unqualified_cs = 32'b00000000_01000000_00000000_00000000;
                `SPR_GROUP_WIDTH'd23: unqualified_cs = 32'b00000000_10000000_00000000_00000000;
                `SPR_GROUP_WIDTH'd24: unqualified_cs = 32'b00000001_00000000_00000000_00000000;
                `SPR_GROUP_WIDTH'd25: unqualified_cs = 32'b00000010_00000000_00000000_00000000;
                `SPR_GROUP_WIDTH'd26: unqualified_cs = 32'b00000100_00000000_00000000_00000000;
                `SPR_GROUP_WIDTH'd27: unqualified_cs = 32'b00001000_00000000_00000000_00000000;
                `SPR_GROUP_WIDTH'd28: unqualified_cs = 32'b00010000_00000000_00000000_00000000;
                `SPR_GROUP_WIDTH'd29: unqualified_cs = 32'b00100000_00000000_00000000_00000000;
                `SPR_GROUP_WIDTH'd30: unqualified_cs = 32'b01000000_00000000_00000000_00000000;
                `SPR_GROUP_WIDTH'd31: unqualified_cs = 32'b10000000_00000000_00000000_00000000;
        endcase
 
//
// SPRs System Group
//
 
//
// What to write into SR
//
assign to_sr = (branch_op == `BRANCHOP_RFE) ? esr : spr_dataout[`SR_WIDTH-1:0];
 
//
// Selects for system SPRs
//
assign cfgr_sel = (spr_cs[`SPR_GROUP_SYS] && (spr_addr[10:4] == `SPR_CFGR));
assign rf_sel = (spr_cs[`SPR_GROUP_SYS] && (spr_addr[10:5] == `SPR_RF));
assign sr_sel = (spr_cs[`SPR_GROUP_SYS] && (spr_addr[10:0] == `SPR_SR));
assign epcr_sel = (spr_cs[`SPR_GROUP_SYS] && (spr_addr[10:0] == `SPR_EPCR));
assign eear_sel = (spr_cs[`SPR_GROUP_SYS] && (spr_addr[10:0] == `SPR_EEAR));
assign esr_sel = (spr_cs[`SPR_GROUP_SYS] && (spr_addr[10:0] == `SPR_ESR));
 
//
// Write enables for system SPRs
//
assign sr_we = (write_spr && sr_sel) | (branch_op == `BRANCHOP_RFE);
assign epcr_we = (write_spr && epcr_sel);
assign eear_we = (write_spr && eear_sel);
assign esr_we = (write_spr && esr_sel);
 
//
// Output from system SPRs
//
assign sys_data = (spr_dat_cfgr & {32{read_spr & cfgr_sel}}) |
                  (spr_dat_rf & {32{read_spr & rf_sel}}) |
                  ({{32-`SR_WIDTH{1'b0}},sr} & {32{read_spr & sr_sel}}) |
                  (epcr & {32{read_spr & epcr_sel}}) |
                  (eear & {32{read_spr & eear_sel}}) |
                  ({{32-`SR_WIDTH{1'b0}},esr} & {32{read_spr & esr_sel}});
 
//
// Supervision register
//
always @(posedge clk or posedge rst)
        if (rst)
                sr <= #1 `SR_WIDTH'b011;
        else if (except_started) begin
`ifdef OR1200_VERBOSE
// synopsys translate_off
                $display(" INFO: exception started. SR[SUPV] set and SR[EXR] cleared.");
// synopsys translate_on
`endif
                sr[`SR_SUPV] <= #1 1'b1;
                sr[`SR_EXR] <= #1 1'b0;
                sr[`SR_WIDTH:2] <= #1 {`SR_WIDTH-2{1'b0}};
        end
        else if (sr_we) begin
`ifdef OR1200_VERBOSE
// synopsys translate_off
                $display(" INFO: writing into SR register: %h", spr_dataout);
// synopsys translate_on
`endif
                sr <= #1 to_sr;
        end
 
//
// MTSPR/MFSPR interface
//
always @(sprs_op or spr_addr or spr_dataout or sys_data or spr_dat_pic or spr_dat_pm or
        spr_dat_dmmu or spr_dat_immu or spr_dat_du or spr_dat_tt) begin
        case (sprs_op)  // synopsys full_case parallel_case
                `ALUOP_MTSR : begin
`ifdef OR1200_VERBOSE
// synopsys translate_off
                        $display("%t: SPRS: mtspr (%h) <- %h", $time, spr_addr, spr_dataout);
// synopsys translate_on
`endif
                        write_spr = 1'b1;
                        read_spr = 1'b0;
                        to_wbmux = 32'b0;
                end
                `ALUOP_MFSR : begin
                        casex (spr_addr[`SPR_GROUP_BITS])
                                `SPR_GROUP_TT:
                                        to_wbmux = spr_dat_tt;
                                `SPR_GROUP_PIC:
                                        to_wbmux = spr_dat_pic;
                                `SPR_GROUP_PM:
                                        to_wbmux = spr_dat_pm;
                                `SPR_GROUP_DMMU:
                                        to_wbmux = spr_dat_dmmu;
                                `SPR_GROUP_IMMU:
                                        to_wbmux = spr_dat_immu;
                                `SPR_GROUP_DU:
                                        to_wbmux = spr_dat_du;
                                `SPR_GROUP_SYS:
                                        to_wbmux = sys_data;
                                default:
                                        to_wbmux = 32'b0;
                        endcase
                        write_spr = 1'b0;
                        read_spr = 1'b1;
                end
                default : begin
                        write_spr = 1'b0;
                        read_spr = 1'b0;
                        to_wbmux = 32'b0;
                end
        endcase
end
 
endmodule

Line No.	Rev	Author	Line
1	161	lampret	`//////////////////////////////////////////////////////////////////////`
2			`//// ////`
3			`//// OR1200's interface to SPRs ////`
4			`//// ////`
5			`//// This file is part of the OpenRISC 1200 project ////`
6			`//// http://www.opencores.org/cores/or1k/ ////`
7			`//// ////`
8			`//// Description ////`
9			`//// Decoding of SPR addresses and access to SPRs ////`
10			`//// ////`
11			`//// To Do: ////`
12			`//// - make it smaller and faster ////`
13			`//// ////`
14			`//// Author(s): ////`
15			`//// - Damjan Lampret, lampret@opencores.org ////`
16			`//// ////`
17			`//////////////////////////////////////////////////////////////////////`
18			`//// ////`
19			`//// Copyright (C) 2000 Authors and OPENCORES.ORG ////`
20			`//// ////`
21			`//// This source file may be used and distributed without ////`
22			`//// restriction provided that this copyright statement is not ////`
23			`//// removed from the file and that any derivative work contains ////`
24			`//// the original copyright notice and the associated disclaimer. ////`
25			`//// ////`
26			`//// This source file is free software; you can redistribute it ////`
27			`//// and/or modify it under the terms of the GNU Lesser General ////`
28			`//// Public License as published by the Free Software Foundation; ////`
29			`//// either version 2.1 of the License, or (at your option) any ////`
30			`//// later version. ////`
31			`//// ////`
32			`//// This source is distributed in the hope that it will be ////`
33			`//// useful, but WITHOUT ANY WARRANTY; without even the implied ////`
34			`//// warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR ////`
35			`//// PURPOSE. See the GNU Lesser General Public License for more ////`
36			`//// details. ////`
37			`//// ////`
38			`//// You should have received a copy of the GNU Lesser General ////`
39			`//// Public License along with this source; if not, download it ////`
40			`//// from http://www.opencores.org/lgpl.shtml ////`
41			`//// ////`
42			`//////////////////////////////////////////////////////////////////////`
43			`//`
44			`// CVS Revision History`
45			`//`
46			`// $Log: not supported by cvs2svn $`
47	203	lampret	`// Revision 1.3 2001/08/13 03:36:20 lampret`
48			`// Added cfg regs. Moved all defines into one defines.v file. More cleanup.`
49			`//`
50	170	lampret	`// Revision 1.2 2001/08/09 13:39:33 lampret`
51			`// Major clean-up.`
52			`//`
53	168	lampret	`// Revision 1.1 2001/07/20 00:46:21 lampret`
54			`// Development version of RTL. Libraries are missing.`
55	161	lampret	`//`
56	168	lampret	`//`
57	161	lampret
58	168	lampret	`include "timescale.v"
59			`include "defines.v"
60	161	lampret
61			`module sprs(`
62			`// Clk & Rst`
63			`clk, rst,`
64
65	168	lampret	`// Internal CPU interface`
66			`flag, addrbase, addrofs, dat_i, alu_op, branch_op,`
67			`epcr, eear, esr, except_start, except_started,`
68			`to_wbmux, epcr_we, eear_we, esr_we, sr,`
69	209	lampret	`spr_dat_cfgr, spr_dat_rf,`
70	161	lampret
71			`// From/to other RISC units`
72			`spr_dat_pic, spr_dat_tt, spr_dat_pm,`
73	209	lampret	`spr_dat_dmmu, spr_dat_immu, spr_dat_du,`
74			`spr_addr, spr_dataout, spr_cs, spr_we,`
75
76			`du_addr, du_dat_du, du_read,`
77			`du_write`
78
79	161	lampret	`);`
80
81			parameter width = `OPERAND_WIDTH;
82
83			`//`
84			`// I/O Ports`
85			`//`
86
87			`//`
88	168	lampret	`// Internal CPU interface`
89	161	lampret	`//`
90	168	lampret	`input clk; // Clock`
91			`input rst; // Reset`
92			`input flag; // From ALU`
93			`input [width-1:0] addrbase; // SPR base address`
94			`input [15:0] addrofs; // SPR offset`
95			`input [width-1:0] dat_i; // SPR write data`
96			input [`ALUOP_WIDTH-1:0] alu_op; // ALU operation
97			input [`BRANCHOP_WIDTH-1:0] branch_op; // Branch operation
98			`input [width-1:0] epcr; // EPCR0`
99			`input [width-1:0] eear; // EEAR0`
100			input [`SR_WIDTH-1:0] esr; // ESR0
101			`input except_start; // Start of exception`
102			`input except_started; // Exception was started`
103			`output [width-1:0] to_wbmux; // For l.mfspr`
104			`output epcr_we; // EPCR0 write enable`
105			`output eear_we; // EEAR0 write enable`
106			`output esr_we; // ESR0 write enable`
107			output [`SR_WIDTH-1:0] sr; // SR
108	170	lampret	`input [31:0] spr_dat_cfgr; // Data from CFGR`
109	209	lampret	`input [31:0] spr_dat_rf; // Data from RF`
110	161	lampret
111	168	lampret	`//`
112	161	lampret	`// To/from other RISC units`
113	168	lampret	`//`
114			`input [31:0] spr_dat_pic; // Data from PIC`
115			`input [31:0] spr_dat_tt; // Data from TT`
116			`input [31:0] spr_dat_pm; // Data from PM`
117	203	lampret	`input [31:0] spr_dat_dmmu; // Data from DMMU`
118	209	lampret	`input [31:0] spr_dat_immu; // Data from IMMU`
119			`input [31:0] spr_dat_du; // Data from DU`
120	168	lampret	`output [31:0] spr_addr; // SPR Address`
121			`output [31:0] spr_dataout; // Data to unit`
122			`output [31:0] spr_cs; // Unit select`
123			`output spr_we; // SPR write enable`
124	161	lampret
125	168	lampret	`//`
126	209	lampret	`// To/from Debug Unit`
127			`//`
128			`input [width-1:0] du_addr; // Address`
129			`input [width-1:0] du_dat_du; // Data from DU to SPRS`
130			`input du_read; // Read qualifier`
131			`input du_write; // Write qualifier`
132
133			`//`
134	168	lampret	`// Internal regs & wires`
135			`//`
136			reg [`SR_WIDTH-1:0] sr; // SR
137			`reg write_spr; // Write SPR`
138			`reg read_spr; // Read SPR`
139			`reg [width-1:0] to_wbmux; // For l.mfspr`
140			`wire sr_we; // Write enable SR`
141	170	lampret	`wire cfgr_sel; // Select for cfg regs`
142	209	lampret	`wire rf_sel; // Select for RF`
143	168	lampret	`wire sr_sel; // Select for SR`
144			`wire epcr_sel; // Select for EPCR0`
145			`wire eear_sel; // Select for EEAR0`
146			`wire esr_sel; // Select for ESR0`
147			`wire [31:0] sys_data; // Read data from system SPRs`
148			wire [`SR_WIDTH-1:0] to_sr; // Data to SR
149	209	lampret	`wire du_access; // Debug unit access`
150			wire [`ALUOP_WIDTH-1:0] sprs_op; // ALU operation
151			`reg [31:0] unqualified_cs; // Unqualified chip selects`
152	161	lampret
153	168	lampret	`//`
154	209	lampret	`// Decide if it is debug unit access`
155			`//`
156			`assign du_access = du_read \| du_write;`
157
158			`//`
159			`// Generate sprs opcode`
160			`//`
161			assign sprs_op = du_write ? `ALUOP_MTSR : du_read ? `ALUOP_MFSR : alu_op;
162
163			`//`
164	168	lampret	`// Generate SPR address from base address and offset`
165	209	lampret	`// OR from debug unit address`
166	168	lampret	`//`
167	209	lampret	`assign spr_addr = du_access ? du_addr : addrbase + {16'h0000, addrofs};`
168	161	lampret
169			`//`
170	209	lampret	`// SPR is written with dat_i from l.mtspr`
171			`// OR by debug unit`
172	161	lampret	`//`
173	209	lampret	`assign spr_dataout = du_access ? du_dat_du : dat_i;`
174	161	lampret
175	168	lampret	`//`
176			`// Write into SPRs when l.mtspr`
177			`//`
178	209	lampret	`assign spr_we = du_write \| write_spr;`
179	161	lampret
180	168	lampret	`//`
181	209	lampret	`// Qualify chip selects`
182			`//`
183			`assign spr_cs = unqualified_cs & {32{read_spr \| write_spr}};`
184
185			`//`
186	168	lampret	`// Decoding of groups`
187			`//`
188			`always @(spr_addr)`
189			case (spr_addr[`SPR_GROUP_BITS]) // synopsys parallel_case
190	209	lampret	`SPR_GROUP_WIDTH'd00: unqualified_cs = 32'b00000000_00000000_00000000_00000001;
191			`SPR_GROUP_WIDTH'd01: unqualified_cs = 32'b00000000_00000000_00000000_00000010;
192			`SPR_GROUP_WIDTH'd02: unqualified_cs = 32'b00000000_00000000_00000000_00000100;
193			`SPR_GROUP_WIDTH'd03: unqualified_cs = 32'b00000000_00000000_00000000_00001000;
194			`SPR_GROUP_WIDTH'd04: unqualified_cs = 32'b00000000_00000000_00000000_00010000;
195			`SPR_GROUP_WIDTH'd05: unqualified_cs = 32'b00000000_00000000_00000000_00100000;
196			`SPR_GROUP_WIDTH'd06: unqualified_cs = 32'b00000000_00000000_00000000_01000000;
197			`SPR_GROUP_WIDTH'd07: unqualified_cs = 32'b00000000_00000000_00000000_10000000;
198			`SPR_GROUP_WIDTH'd08: unqualified_cs = 32'b00000000_00000000_00000001_00000000;
199			`SPR_GROUP_WIDTH'd09: unqualified_cs = 32'b00000000_00000000_00000010_00000000;
200			`SPR_GROUP_WIDTH'd10: unqualified_cs = 32'b00000000_00000000_00000100_00000000;
201			`SPR_GROUP_WIDTH'd11: unqualified_cs = 32'b00000000_00000000_00001000_00000000;
202			`SPR_GROUP_WIDTH'd12: unqualified_cs = 32'b00000000_00000000_00010000_00000000;
203			`SPR_GROUP_WIDTH'd13: unqualified_cs = 32'b00000000_00000000_00100000_00000000;
204			`SPR_GROUP_WIDTH'd14: unqualified_cs = 32'b00000000_00000000_01000000_00000000;
205			`SPR_GROUP_WIDTH'd15: unqualified_cs = 32'b00000000_00000000_10000000_00000000;
206			`SPR_GROUP_WIDTH'd16: unqualified_cs = 32'b00000000_00000001_00000000_00000000;
207			`SPR_GROUP_WIDTH'd17: unqualified_cs = 32'b00000000_00000010_00000000_00000000;
208			`SPR_GROUP_WIDTH'd18: unqualified_cs = 32'b00000000_00000100_00000000_00000000;
209			`SPR_GROUP_WIDTH'd19: unqualified_cs = 32'b00000000_00001000_00000000_00000000;
210			`SPR_GROUP_WIDTH'd20: unqualified_cs = 32'b00000000_00010000_00000000_00000000;
211			`SPR_GROUP_WIDTH'd21: unqualified_cs = 32'b00000000_00100000_00000000_00000000;
212			`SPR_GROUP_WIDTH'd22: unqualified_cs = 32'b00000000_01000000_00000000_00000000;
213			`SPR_GROUP_WIDTH'd23: unqualified_cs = 32'b00000000_10000000_00000000_00000000;
214			`SPR_GROUP_WIDTH'd24: unqualified_cs = 32'b00000001_00000000_00000000_00000000;
215			`SPR_GROUP_WIDTH'd25: unqualified_cs = 32'b00000010_00000000_00000000_00000000;
216			`SPR_GROUP_WIDTH'd26: unqualified_cs = 32'b00000100_00000000_00000000_00000000;
217			`SPR_GROUP_WIDTH'd27: unqualified_cs = 32'b00001000_00000000_00000000_00000000;
218			`SPR_GROUP_WIDTH'd28: unqualified_cs = 32'b00010000_00000000_00000000_00000000;
219			`SPR_GROUP_WIDTH'd29: unqualified_cs = 32'b00100000_00000000_00000000_00000000;
220			`SPR_GROUP_WIDTH'd30: unqualified_cs = 32'b01000000_00000000_00000000_00000000;
221			`SPR_GROUP_WIDTH'd31: unqualified_cs = 32'b10000000_00000000_00000000_00000000;
222	168	lampret	`endcase`
223	161	lampret
224	168	lampret	`//`
225			`// SPRs System Group`
226			`//`
227	161	lampret
228	168	lampret	`//`
229			`// What to write into SR`
230			`//`
231	209	lampret	assign to_sr = (branch_op == `BRANCHOP_RFE) ? esr : spr_dataout[`SR_WIDTH-1:0];
232	161	lampret
233	168	lampret	`//`
234			`// Selects for system SPRs`
235			`//`
236	209	lampret	assign cfgr_sel = (spr_cs[`SPR_GROUP_SYS] && (spr_addr[10:4] == `SPR_CFGR));
237			assign rf_sel = (spr_cs[`SPR_GROUP_SYS] && (spr_addr[10:5] == `SPR_RF));
238			assign sr_sel = (spr_cs[`SPR_GROUP_SYS] && (spr_addr[10:0] == `SPR_SR));
239			assign epcr_sel = (spr_cs[`SPR_GROUP_SYS] && (spr_addr[10:0] == `SPR_EPCR));
240			assign eear_sel = (spr_cs[`SPR_GROUP_SYS] && (spr_addr[10:0] == `SPR_EEAR));
241			assign esr_sel = (spr_cs[`SPR_GROUP_SYS] && (spr_addr[10:0] == `SPR_ESR));
242	168	lampret
243			`//`
244			`// Write enables for system SPRs`
245			`//`
246	161	lampret	assign sr_we = (write_spr && sr_sel) \| (branch_op == `BRANCHOP_RFE);
247			`assign epcr_we = (write_spr && epcr_sel);`
248			`assign eear_we = (write_spr && eear_sel);`
249			`assign esr_we = (write_spr && esr_sel);`
250
251	168	lampret	`//`
252			`// Output from system SPRs`
253			`//`
254	170	lampret	`assign sys_data = (spr_dat_cfgr & {32{read_spr & cfgr_sel}}) \|`
255	209	lampret	`(spr_dat_rf & {32{read_spr & rf_sel}}) \|`
256			({{32-`SR_WIDTH{1'b0}},sr} & {32{read_spr & sr_sel}}) \|
257	161	lampret	`(epcr & {32{read_spr & epcr_sel}}) \|`
258			`(eear & {32{read_spr & eear_sel}}) \|`
259	209	lampret	({{32-`SR_WIDTH{1'b0}},esr} & {32{read_spr & esr_sel}});
260	161	lampret
261	168	lampret	`//`
262	161	lampret	`// Supervision register`
263	168	lampret	`//`
264	161	lampret	`always @(posedge clk or posedge rst)`
265			`if (rst)`
266			sr <= #1 `SR_WIDTH'b011;
267			`else if (except_started) begin`
268	203	lampret	`ifdef OR1200_VERBOSE
269			`// synopsys translate_off`
270	161	lampret	`$display(" INFO: exception started. SR[SUPV] set and SR[EXR] cleared.");`
271	203	lampret	`// synopsys translate_on`
272			`endif
273	161	lampret	sr[`SR_SUPV] <= #1 1'b1;
274			sr[`SR_EXR] <= #1 1'b0;
275	209	lampret	sr[`SR_WIDTH:2] <= #1 {`SR_WIDTH-2{1'b0}};
276	161	lampret	`end`
277			`else if (sr_we) begin`
278	203	lampret	`ifdef OR1200_VERBOSE
279			`// synopsys translate_off`
280	209	lampret	`$display(" INFO: writing into SR register: %h", spr_dataout);`
281	203	lampret	`// synopsys translate_on`
282			`endif
283	161	lampret	`sr <= #1 to_sr;`
284			`end`
285
286	168	lampret	`//`
287			`// MTSPR/MFSPR interface`
288			`//`
289	209	lampret	`always @(sprs_op or spr_addr or spr_dataout or sys_data or spr_dat_pic or spr_dat_pm or`
290			`spr_dat_dmmu or spr_dat_immu or spr_dat_du or spr_dat_tt) begin`
291			`case (sprs_op) // synopsys full_case parallel_case`
292	161	lampret	`ALUOP_MTSR : begin
293	203	lampret	`ifdef OR1200_VERBOSE
294			`// synopsys translate_off`
295	209	lampret	`$display("%t: SPRS: mtspr (%h) <- %h", $time, spr_addr, spr_dataout);`
296	203	lampret	`// synopsys translate_on`
297			`endif
298			`write_spr = 1'b1;`
299			`read_spr = 1'b0;`
300			`to_wbmux = 32'b0;`
301	161	lampret	`end`
302			`ALUOP_MFSR : begin
303	168	lampret	casex (spr_addr[`SPR_GROUP_BITS])
304	161	lampret	`SPR_GROUP_TT:
305	203	lampret	`to_wbmux = spr_dat_tt;`
306	161	lampret	`SPR_GROUP_PIC:
307	203	lampret	`to_wbmux = spr_dat_pic;`
308	161	lampret	`SPR_GROUP_PM:
309	203	lampret	`to_wbmux = spr_dat_pm;`
310			`SPR_GROUP_DMMU:
311			`to_wbmux = spr_dat_dmmu;`
312	209	lampret	`SPR_GROUP_IMMU:
313			`to_wbmux = spr_dat_immu;`
314			`SPR_GROUP_DU:
315			`to_wbmux = spr_dat_du;`
316	161	lampret	`SPR_GROUP_SYS:
317	203	lampret	`to_wbmux = sys_data;`
318	161	lampret	`default:`
319	203	lampret	`to_wbmux = 32'b0;`
320	161	lampret	`endcase`
321	203	lampret	`write_spr = 1'b0;`
322			`read_spr = 1'b1;`
323	161	lampret	`end`
324			`default : begin`
325	203	lampret	`write_spr = 1'b0;`
326			`read_spr = 1'b0;`
327			`to_wbmux = 32'b0;`
328	161	lampret	`end`
329			`endcase`
330			`end`
331
332			`endmodule`

Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [branches/] [mp3_stable/] [or1200/] [rtl/] [verilog/] [sprs.v] - Blame information for rev 209