Subversion Repositories or1k

/*

 * cma101.c -- lo-level support for Cogent CMA101 development board.

 *

 * Copyright (c) 1996 Cygnus Support

 *

 * The authors hereby grant permission to use, copy, modify, distribute,

 * and license this software and its documentation for any purpose, provided

 * that existing copyright notices are retained in all copies and that this

 * notice is included verbatim in any distributions. No written agreement,

 * license, or royalty fee is required for any of the authorized uses.

 * Modifications to this software may be copyrighted by their authors

 * and need not follow the licensing terms described here, provided that

 * the new terms are clearly indicated on the first page of each file where

 * they apply.

 */

#ifdef __mips16

/* The assembler portions of this file need to be re-written to

   support mips16, if and when that seems useful.

*/

#error cma101.c can not be compiled -mips16

#endif

#include <time.h>       /* standard ANSI time routines */

/* Normally these would appear in a header file for external

   use. However, we are only building a simple example world at the

   moment: */

#include "regs.S"

#if defined(MIPSEB)

#define BYTEREG(b,o)    ((volatile unsigned char *)(PHYS_TO_K1((b) + (o) + 7)))

#endif /* MIPSEB */

#if defined(MIPSEL)

#define BYTEREG(b,o)    ((volatile unsigned char *)(PHYS_TO_K1((b) + (o))))

#endif /* MIPSEL */

/* I/O addresses: */

#define RTCLOCK_BASE (0x0E800000) /* Mk48T02 NVRAM/RTC */

#define UART_BASE    (0x0E900000) /* NS16C552 DUART */

#define LCD_BASE     (0x0EB00000) /* Alphanumeric display */

/* LCD panel manifests: */

#define LCD_DATA     BYTEREG(LCD_BASE,0)

#define LCD_CMD      BYTEREG(LCD_BASE,8)

#define LCD_STAT_BUSY   (0x80)

#define LCD_SET_DDADDR  (0x80)

/* RTC manifests */

/* The lo-offsets are the NVRAM locations (0x7F8 bytes) */

#define RTC_CONTROL     BYTEREG(RTCLOCK_BASE,0x3FC0)

#define RTC_SECS        BYTEREG(RTCLOCK_BASE,0x3FC8)

#define RTC_MINS        BYTEREG(RTCLOCK_BASE,0x3FD0)

#define RTC_HOURS       BYTEREG(RTCLOCK_BASE,0x3FD8)

#define RTC_DAY         BYTEREG(RTCLOCK_BASE,0x3FE0)

#define RTC_DATE        BYTEREG(RTCLOCK_BASE,0x3FE8)

#define RTC_MONTH       BYTEREG(RTCLOCK_BASE,0x3FF0)

#define RTC_YEAR        BYTEREG(RTCLOCK_BASE,0x3FF8)

#define RTC_CTL_LOCK_READ       (0x40) /* lock RTC whilst reading */

#define RTC_CTL_LOCK_WRITE      (0x80) /* lock RTC whilst writing */

/* Macro to force out-standing memory transfers to complete before

   next sequence. For the moment we assume that the processor in the

   CMA101 board supports at least ISA II.  */

#define DOSYNC() asm(" .set mips2 ; sync ; .set mips0")

/* We disable interrupts by writing zero to all of the masks, and the

   global interrupt enable bit: */

#define INTDISABLE(sr,tmp) asm("\

 .set mips2 ; \

 mfc0 %0,$12 ; \

 lui %1,0xffff ; \

 ori %1,%1,0xfffe ; \

 and %1, %0, %1 ; \

 mtc0 %1,$12 ; \

 .set mips0" : "=d" (sr), "=d" (tmp))

#define INTRESTORE(sr) asm("\

 .set mips2 ; \

 mtc0 %0,$12 ; \

 .set mips0" : : "d" (sr))

/* TODO:FIXME: The CPU card support should be in separate source file

   from the standard CMA101 support provided in this file. */

/* The CMA101 board being used contains a CMA257 Vr4300 CPU:

   MasterClock is at 33MHz. PClock is derived from MasterClock by

   multiplying by the ratio defined by the DivMode pins:

        DivMode(1:0)    MasterClock     PClock  Ratio

        00              100MHz          100MHz  1:1

        01              100MHz          150MHz  1.5:1

        10              100MHz          200MHz  2:1

        11              100Mhz          300MHz  3:1

   Are these pins reflected in the EC bits in the CONFIG register? or

   is that talking about a different clock multiplier?

        110 = 1

        111 = 1.5

        000 = 2

        001 = 3

        (all other values are undefined)

*/

#define MASTERCLOCK (33) /* ticks per uS */

unsigned int pclock; /* number of PClock ticks per uS */

void

set_pclock (void)

{

  unsigned int config;

  asm volatile ("mfc0 %0,$16 ; nop ; nop" : "=r" (config)); /* nasty CP0 register constant */

  switch ((config >> 28) & 0x7) {

    case 0x7 : /* 1.5:1 */

     pclock = (MASTERCLOCK + (MASTERCLOCK / 2));

     break;

    case 0x0 : /* 2:1 */

     pclock = (2 * MASTERCLOCK);

     break;

    case 0x1 : /* 3:1 */

     pclock = (3 * MASTERCLOCK);

     break;

    case 0x6 : /* 1:1 */

    default : /* invalid configuration, so assume the lowest */

     pclock = MASTERCLOCK;

     break;

  }

  return;

}

#define PCLOCK_WAIT(x)  __cpu_timer_poll((x) * pclock)

/* NOTE: On the Cogent CMA101 board the LCD controller will sometimes

   return not-busy, even though it is. The work-around is to perform a

   ~50uS delay before checking the busy signal. */

static int

lcd_busy (void)

{

  PCLOCK_WAIT(50); /* 50uS delay */

  return(*LCD_CMD & LCD_STAT_BUSY);

}

/* Note: This code *ASSUMES* that the LCD has already been initialised

   by the monitor. It only provides code to write to the LCD, and is

   not a complete device driver. */

void

lcd_display (int line, const char *msg)

{

  int n;

  if (lcd_busy ())

   return;

  *LCD_CMD = (LCD_SET_DDADDR | (line == 1 ? 0x40 : 0x00));

  for (n = 0; n < 16; n++) {

    if (lcd_busy ())

     return;

    if (*msg)

     *LCD_DATA = *msg++;

    else

     *LCD_DATA = ' ';

  }

  return;

}

#define SM_PATTERN (0x55AA55AA)

#define SM_INCR ((256 << 10) / sizeof(unsigned int)) /* 64K words */

extern unsigned int __buserr_count(void);

extern void __default_buserr_handler(void);

extern void __restore_buserr_handler(void);

unsigned int

__sizemem ()

{

  volatile unsigned int *base;

  volatile unsigned int *probe;

  unsigned int baseorig;

  unsigned int sr;

  extern void *end;

  int extra;

  INTDISABLE(sr,baseorig); /* disable all interrupt masks */

  __default_buserr_handler();

  __cpu_flush();

  DOSYNC();

  /* _end is the end of the user program.  _end may not be properly aligned

     for an int pointer, so we adjust the address to make sure it is safe.

     We use void * arithmetic to avoid accidentally truncating the pointer.  */

  extra = ((int) &end & (sizeof (int) - 1));

  base = ((void *) &end + sizeof (int) - extra);

  baseorig = *base;

  *base = SM_PATTERN;

  /* This assumes that the instructions fetched between the store, and

     the following read will have changed the data bus contents: */

  if (*base == SM_PATTERN) {

    probe = base;

    for (;;) {

      unsigned int probeorig;

      probe += SM_INCR;

      probeorig = *probe;

      /* Check if a bus error occurred: */

      if (!__buserr_count()) {

        *probe = SM_PATTERN;

        DOSYNC();

        if (*probe == SM_PATTERN) {

          *probe = ~SM_PATTERN;

          DOSYNC();

          if (*probe == ~SM_PATTERN) {

            if (*base == SM_PATTERN) {

              *probe = probeorig;

              continue;

            }

          }

        }

        *probe = probeorig;

      }

      break;

    }

  }

  *base = baseorig;

  __restore_buserr_handler();

#if 0

  __cpu_flush();

#endif

  DOSYNC();

  INTRESTORE(sr); /* restore interrupt mask to entry state */

  return((probe - base) * sizeof(unsigned int));

}

/* Provided as a function, so as to avoid reading the I/O location

   multiple times: */

static int

convertbcd(byte)

     unsigned char byte;

{

  return ((((byte >> 4) & 0xF) * 10) + (byte & 0xF));

}

time_t

time (_timer)

     time_t *_timer;

{

  time_t result = 0;

  struct tm tm;

  *RTC_CONTROL |= RTC_CTL_LOCK_READ;

  DOSYNC();

  tm.tm_sec = convertbcd(*RTC_SECS);

  tm.tm_min = convertbcd(*RTC_MINS);

  tm.tm_hour = convertbcd(*RTC_HOURS);

  tm.tm_mday = convertbcd(*RTC_DATE);

  tm.tm_mon = convertbcd(*RTC_MONTH);

  tm.tm_year = convertbcd(*RTC_YEAR);

  DOSYNC();

  *RTC_CONTROL &= ~(RTC_CTL_LOCK_READ | RTC_CTL_LOCK_WRITE);

  tm.tm_isdst = 0;

  /* Check for invalid time information */

  if ((tm.tm_sec < 60) && (tm.tm_min < 60) && (tm.tm_hour < 24)

      && (tm.tm_mday < 32) && (tm.tm_mon < 13)) {

    /* Get the correct year number, but keep it in YEAR-1900 form: */

    if (tm.tm_year < 70)

      tm.tm_year += 100;

#if 0 /* NOTE: mon_printf() can only accept 4 arguments (format string + 3 fields) */

    mon_printf("[DBG: s=%d m=%d h=%d]", tm.tm_sec, tm.tm_min, tm.tm_hour);

    mon_printf("[DBG: d=%d m=%d y=%d]", tm.tm_mday, tm.tm_mon, tm.tm_year);

#endif

    /* Convert the time-structure into a second count */

    result = mktime (&tm);

  }

  if (_timer != NULL)

    *_timer = result;

  return (result);

}

/*> EOF cma101.c <*/