OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [branches/] [oc/] [gdb-5.0/] [include/] [dis-asm.h] - Blame information for rev 1765

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 106 markom
/* Interface between the opcode library and its callers.
2
   Written by Cygnus Support, 1993.
3
 
4
   The opcode library (libopcodes.a) provides instruction decoders for
5
   a large variety of instruction sets, callable with an identical
6
   interface, for making instruction-processing programs more independent
7
   of the instruction set being processed.  */
8
 
9
#ifndef DIS_ASM_H
10
#define DIS_ASM_H
11
 
12
#ifdef __cplusplus
13
extern "C" {
14
#endif
15
 
16
#include <stdio.h>
17
#include "bfd.h"
18
 
19
typedef int (*fprintf_ftype) PARAMS((PTR, const char*, ...));
20
 
21
enum dis_insn_type {
22
  dis_noninsn,                  /* Not a valid instruction */
23
  dis_nonbranch,                /* Not a branch instruction */
24
  dis_branch,                   /* Unconditional branch */
25
  dis_condbranch,               /* Conditional branch */
26
  dis_jsr,                      /* Jump to subroutine */
27
  dis_condjsr,                  /* Conditional jump to subroutine */
28
  dis_dref,                     /* Data reference instruction */
29
  dis_dref2                     /* Two data references in instruction */
30
};
31
 
32
/* This struct is passed into the instruction decoding routine,
33
   and is passed back out into each callback.  The various fields are used
34
   for conveying information from your main routine into your callbacks,
35
   for passing information into the instruction decoders (such as the
36
   addresses of the callback functions), or for passing information
37
   back from the instruction decoders to their callers.
38
 
39
   It must be initialized before it is first passed; this can be done
40
   by hand, or using one of the initialization macros below.  */
41
 
42
typedef struct disassemble_info {
43
  fprintf_ftype fprintf_func;
44
  PTR stream;
45
  PTR application_data;
46
 
47
  /* Target description.  We could replace this with a pointer to the bfd,
48
     but that would require one.  There currently isn't any such requirement
49
     so to avoid introducing one we record these explicitly.  */
50
  /* The bfd_flavour.  This can be bfd_target_unknown_flavour.  */
51
  enum bfd_flavour flavour;
52
  /* The bfd_arch value.  */
53
  enum bfd_architecture arch;
54
  /* The bfd_mach value.  */
55
  unsigned long mach;
56
  /* Endianness (for bi-endian cpus).  Mono-endian cpus can ignore this.  */
57
  enum bfd_endian endian;
58
 
59
  /* An array of pointers to symbols either at the location being disassembled
60
     or at the start of the function being disassembled.  The array is sorted
61
     so that the first symbol is intended to be the one used.  The others are
62
     present for any misc. purposes.  This is not set reliably, but if it is
63
     not NULL, it is correct.  */
64
  asymbol **symbols;
65
  /* Number of symbols in array.  */
66
  int num_symbols;
67
 
68
  /* For use by the disassembler.
69
     The top 16 bits are reserved for public use (and are documented here).
70
     The bottom 16 bits are for the internal use of the disassembler.  */
71
  unsigned long flags;
72
#define INSN_HAS_RELOC  0x80000000
73
  PTR private_data;
74
 
75
  /* Function used to get bytes to disassemble.  MEMADDR is the
76
     address of the stuff to be disassembled, MYADDR is the address to
77
     put the bytes in, and LENGTH is the number of bytes to read.
78
     INFO is a pointer to this struct.
79
     Returns an errno value or 0 for success.  */
80
  int (*read_memory_func)
81
    PARAMS ((bfd_vma memaddr, bfd_byte *myaddr, unsigned int length,
82
             struct disassemble_info *info));
83
 
84
  /* Function which should be called if we get an error that we can't
85
     recover from.  STATUS is the errno value from read_memory_func and
86
     MEMADDR is the address that we were trying to read.  INFO is a
87
     pointer to this struct.  */
88
  void (*memory_error_func)
89
    PARAMS ((int status, bfd_vma memaddr, struct disassemble_info *info));
90
 
91
  /* Function called to print ADDR.  */
92
  void (*print_address_func)
93
    PARAMS ((bfd_vma addr, struct disassemble_info *info));
94
 
95
  /* Function called to determine if there is a symbol at the given ADDR.
96
     If there is, the function returns 1, otherwise it returns 0.
97
     This is used by ports which support an overlay manager where
98
     the overlay number is held in the top part of an address.  In
99
     some circumstances we want to include the overlay number in the
100
     address, (normally because there is a symbol associated with
101
     that address), but sometimes we want to mask out the overlay bits.  */
102
  int (* symbol_at_address_func)
103
    PARAMS ((bfd_vma addr, struct disassemble_info * info));
104
 
105
  /* These are for buffer_read_memory.  */
106
  bfd_byte *buffer;
107
  bfd_vma buffer_vma;
108
  unsigned int buffer_length;
109
 
110
  /* This variable may be set by the instruction decoder.  It suggests
111
      the number of bytes objdump should display on a single line.  If
112
      the instruction decoder sets this, it should always set it to
113
      the same value in order to get reasonable looking output.  */
114
  int bytes_per_line;
115
 
116
  /* the next two variables control the way objdump displays the raw data */
117
  /* For example, if bytes_per_line is 8 and bytes_per_chunk is 4, the */
118
  /* output will look like this:
119
     00:   00000000 00000000
120
     with the chunks displayed according to "display_endian". */
121
  int bytes_per_chunk;
122
  enum bfd_endian display_endian;
123
 
124
  /* Number of octets per incremented target address
125
     Normally one, but some DSPs have byte sizes of 16 or 32 bits
126
   */
127
  unsigned int octets_per_byte;
128
 
129
  /* Results from instruction decoders.  Not all decoders yet support
130
     this information.  This info is set each time an instruction is
131
     decoded, and is only valid for the last such instruction.
132
 
133
     To determine whether this decoder supports this information, set
134
     insn_info_valid to 0, decode an instruction, then check it.  */
135
 
136
  char insn_info_valid;         /* Branch info has been set. */
137
  char branch_delay_insns;      /* How many sequential insn's will run before
138
                                   a branch takes effect.  (0 = normal) */
139
  char data_size;               /* Size of data reference in insn, in bytes */
140
  enum dis_insn_type insn_type; /* Type of instruction */
141
  bfd_vma target;               /* Target address of branch or dref, if known;
142
                                   zero if unknown.  */
143
  bfd_vma target2;              /* Second target address for dref2 */
144
 
145
  /* Command line options specific to the target disassembler.  */
146
  char * disassembler_options;
147
 
148
} disassemble_info;
149
 
150
 
151
/* Standard disassemblers.  Disassemble one instruction at the given
152
   target address.  Return number of bytes processed.  */
153
typedef int (*disassembler_ftype)
154
     PARAMS((bfd_vma, disassemble_info *));
155
 
156
extern int print_insn_big_mips          PARAMS ((bfd_vma, disassemble_info*));
157
extern int print_insn_little_mips       PARAMS ((bfd_vma, disassemble_info*));
158
extern int print_insn_i386_att          PARAMS ((bfd_vma, disassemble_info*));
159
extern int print_insn_i386_intel        PARAMS ((bfd_vma, disassemble_info*));
160
extern int print_insn_i370              PARAMS ((bfd_vma, disassemble_info*));
161
extern int print_insn_m68k              PARAMS ((bfd_vma, disassemble_info*));
162
extern int print_insn_z8001             PARAMS ((bfd_vma, disassemble_info*));
163
extern int print_insn_z8002             PARAMS ((bfd_vma, disassemble_info*));
164
extern int print_insn_h8300             PARAMS ((bfd_vma, disassemble_info*));
165
extern int print_insn_h8300h            PARAMS ((bfd_vma, disassemble_info*));
166
extern int print_insn_h8300s            PARAMS ((bfd_vma, disassemble_info*));
167
extern int print_insn_h8500             PARAMS ((bfd_vma, disassemble_info*));
168
extern int print_insn_alpha             PARAMS ((bfd_vma, disassemble_info*));
169
extern disassembler_ftype arc_get_disassembler PARAMS ((int, int));
170
extern int print_insn_big_arm           PARAMS ((bfd_vma, disassemble_info*));
171
extern int print_insn_little_arm        PARAMS ((bfd_vma, disassemble_info*));
172
extern int print_insn_sparc             PARAMS ((bfd_vma, disassemble_info*));
173
extern int print_insn_big_a29k          PARAMS ((bfd_vma, disassemble_info*));
174
extern int print_insn_little_a29k       PARAMS ((bfd_vma, disassemble_info*));
175
extern int print_insn_i960              PARAMS ((bfd_vma, disassemble_info*));
176
extern int print_insn_sh                PARAMS ((bfd_vma, disassemble_info*));
177
extern int print_insn_shl               PARAMS ((bfd_vma, disassemble_info*));
178
extern int print_insn_hppa              PARAMS ((bfd_vma, disassemble_info*));
179
extern int print_insn_fr30              PARAMS ((bfd_vma, disassemble_info*));
180
extern int print_insn_m32r              PARAMS ((bfd_vma, disassemble_info*));
181
extern int print_insn_m88k              PARAMS ((bfd_vma, disassemble_info*));
182
extern int print_insn_mcore             PARAMS ((bfd_vma, disassemble_info*));
183
extern int print_insn_mn10200           PARAMS ((bfd_vma, disassemble_info*));
184
extern int print_insn_mn10300           PARAMS ((bfd_vma, disassemble_info*));
185
extern int print_insn_ns32k             PARAMS ((bfd_vma, disassemble_info*));
186
extern int print_insn_big_powerpc       PARAMS ((bfd_vma, disassemble_info*));
187
extern int print_insn_little_powerpc    PARAMS ((bfd_vma, disassemble_info*));
188
extern int print_insn_rs6000            PARAMS ((bfd_vma, disassemble_info*));
189
extern int print_insn_w65               PARAMS ((bfd_vma, disassemble_info*));
190
extern int print_insn_d10v              PARAMS ((bfd_vma, disassemble_info*));
191
extern int print_insn_d30v              PARAMS ((bfd_vma, disassemble_info*));
192
extern int print_insn_v850              PARAMS ((bfd_vma, disassemble_info*));
193
extern int print_insn_tic30             PARAMS ((bfd_vma, disassemble_info*));
194
extern int print_insn_vax               PARAMS ((bfd_vma, disassemble_info*));
195
extern int print_insn_tic80             PARAMS ((bfd_vma, disassemble_info*));
196
extern int print_insn_pj                PARAMS ((bfd_vma, disassemble_info*));
197
extern int print_insn_avr               PARAMS ((bfd_vma, disassemble_info*));
198
extern int print_insn_big_or1k          PARAMS ((bfd_vma, disassemble_info*));
199
extern int print_insn_little_or32       PARAMS ((bfd_vma, disassemble_info*));
200
extern int print_insn_big_or32          PARAMS ((bfd_vma, disassemble_info*));
201
extern int print_insn_little_or16       PARAMS ((bfd_vma, disassemble_info*));
202
extern int print_insn_big_or16          PARAMS ((bfd_vma, disassemble_info*));
203
 
204
extern void print_arm_disassembler_options PARAMS ((FILE *));
205
extern void parse_arm_disassembler_option  PARAMS ((char *));
206
extern int  get_arm_regname_num_options    PARAMS ((void));
207
extern int  set_arm_regname_option         PARAMS ((int));
208
extern int  get_arm_regnames               PARAMS ((int, const char **, const char **, const char ***));
209
 
210
/* Fetch the disassembler for a given BFD, if that support is available.  */
211
extern disassembler_ftype disassembler  PARAMS ((bfd *));
212
 
213
/* Document any target specific options available from the disassembler.  */
214
extern void disassembler_usage          PARAMS ((FILE *));
215
 
216
 
217
/* This block of definitions is for particular callers who read instructions
218
   into a buffer before calling the instruction decoder.  */
219
 
220
/* Here is a function which callers may wish to use for read_memory_func.
221
   It gets bytes from a buffer.  */
222
extern int buffer_read_memory
223
  PARAMS ((bfd_vma, bfd_byte *, unsigned int, struct disassemble_info *));
224
 
225
/* This function goes with buffer_read_memory.
226
   It prints a message using info->fprintf_func and info->stream.  */
227
extern void perror_memory PARAMS ((int, bfd_vma, struct disassemble_info *));
228
 
229
 
230
/* Just print the address in hex.  This is included for completeness even
231
   though both GDB and objdump provide their own (to print symbolic
232
   addresses).  */
233
extern void generic_print_address
234
  PARAMS ((bfd_vma, struct disassemble_info *));
235
 
236
/* Always true.  */
237
extern int generic_symbol_at_address
238
  PARAMS ((bfd_vma, struct disassemble_info *));
239
 
240
/* Macro to initialize a disassemble_info struct.  This should be called
241
   by all applications creating such a struct.  */
242
#define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \
243
  (INFO).flavour = bfd_target_unknown_flavour, \
244
  (INFO).arch = bfd_arch_unknown, \
245
  (INFO).mach = 0, \
246
  (INFO).endian = BFD_ENDIAN_UNKNOWN, \
247
  (INFO).octets_per_byte = 1, \
248
  INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC)
249
 
250
/* Call this macro to initialize only the internal variables for the
251
   disassembler.  Architecture dependent things such as byte order, or machine
252
   variant are not touched by this macro.  This makes things much easier for
253
   GDB which must initialize these things seperatly.  */
254
 
255
#define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \
256
  (INFO).fprintf_func = (fprintf_ftype)(FPRINTF_FUNC), \
257
  (INFO).stream = (PTR)(STREAM), \
258
  (INFO).symbols = NULL, \
259
  (INFO).num_symbols = 0, \
260
  (INFO).buffer = NULL, \
261
  (INFO).buffer_vma = 0, \
262
  (INFO).buffer_length = 0, \
263
  (INFO).read_memory_func = buffer_read_memory, \
264
  (INFO).memory_error_func = perror_memory, \
265
  (INFO).print_address_func = generic_print_address, \
266
  (INFO).symbol_at_address_func = generic_symbol_at_address, \
267
  (INFO).flags = 0, \
268
  (INFO).bytes_per_line = 0, \
269
  (INFO).bytes_per_chunk = 0, \
270
  (INFO).display_endian = BFD_ENDIAN_UNKNOWN, \
271
  (INFO).insn_info_valid = 0
272
 
273
#ifdef __cplusplus
274
};
275
#endif
276
 
277
#endif /* ! defined (DIS_ASM_H) */

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.