Subversion Repositories or1k

/* tty.c -- Definition of functions for peripheral to

 * communicate with host via a tty.

   Copyright (C) 2002 Richard Prescott <rip@step.polymtl.ca>

This file is part of OpenRISC 1000 Architectural Simulator.

This program is free software; you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation; either version 2 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program; if not, write to the Free Software

Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */

#include <stdio.h>

#include <termios.h>

#include <unistd.h>

#include <string.h>

#include <fcntl.h>

#include <stdlib.h>

#include "channel.h"

#include "generic.h"

#include "fd.h"

// Default parameters if not specified in config file

#define DEFAULT_BAUD B19200

#define DEFAULT_TTY_DEVICE "/dev/ttyS0"

struct tty_channel

{

    struct fd_channel fds;

};

static struct {

        char* name;

        int value;

} baud_table[] = {

        {"50", B50},

        {"2400",   B2400},

        {"4800",   B4800},

        {"9600",   B9600},

        {"19200",  B19200},

        {"38400",  B38400},

        {"115200", B115200},

        {"230400", B230400},

        {0,        0}

};

// Convert baud rate string to termio baud rate constant

int

parse_baud(char* baud_string)

{

        int i;

        for (i = 0; baud_table[i].name; i++) {

                if (!strcmp(baud_table[i].name, baud_string))

                        return baud_table[i].value;

        }

        fprintf(stderr, "Error: unknown baud rate: %s\n", baud_string);

        fprintf(stderr, "       Known baud rates: ");

        for (i = 0; baud_table[i].name; i++) {

                fprintf(stderr, "%s%s", baud_table[i].name, baud_table[i+1].name ? ", " : "\n");

        }

        return B0;

}

static void * tty_init(const char * input)

{

        int fd, baud;

        char *param_name, *param_value, *device;

    struct termios options;

    struct tty_channel* channel;

        channel = (struct tty_channel*)malloc(sizeof(struct tty_channel));

    if (!channel)

                return NULL;

        // Make a copy of config string, because we're about to mutate it

        input = strdup(input);

        if (!input)

                goto error;

        baud = DEFAULT_BAUD;

        device = DEFAULT_TTY_DEVICE;

        // Parse command-line parameters

        // Command line looks like name1=value1,name2,name3=value3,...

        while ((param_name = strtok((char*)input, ","))) {

                input = NULL;

                // Parse a parameter's name and value

                param_value = strchr(param_name,'=');

                if (param_value != NULL) {

                        *param_value = '\0';

                        param_value++;          // Advance past '=' character

                }

                if (!strcmp(param_name, "baud") && param_value) {

                        baud = parse_baud(param_value);

                        if (baud == B0) {

                                goto error;

                        }

                } else if (!strcmp(param_name, "device")) {

                        device = param_value;

                } else {

                        fprintf(stderr, "error: unknown tty channel parameter \"%s\"\n", param_name);

                        goto error;

                }

        }

        fd = open(device, O_RDWR);

        if (fd < 0)

                goto error;

    // Get the current options for the port...

    if (tcgetattr(fd, &options) < 0)

                goto error;

    // Set the serial baud rate

    cfsetispeed(&options, baud);

    cfsetospeed(&options, baud);

    // Enable the receiver and set local mode...

    /* cfmakeraw(&options);

     *

     * cygwin lacks cfmakeraw(), just do it explicitly

     */

    options.c_iflag &= ~(IGNBRK|BRKINT|PARMRK|ISTRIP

                               |INLCR|IGNCR|ICRNL|IXON);

    options.c_oflag &= ~OPOST;

    options.c_lflag &= ~(ECHO|ECHONL|ICANON|ISIG|IEXTEN);

    options.c_cflag &= ~(CSIZE|PARENB);

    options.c_cflag |= CS8;

    options.c_cflag |= (CLOCAL | CREAD);

    // Set the new options for the port...

    if (tcsetattr(fd, TCSANOW, &options) < 0)

                goto error;

    channel->fds.fdin = channel->fds.fdout = fd;

        free((void *)input);

    return channel;

error:

    if (fd > 0)

                close(fd);

    free(channel);

        if (input)

                free((void *)input);

    return NULL;

}

static int tty_open(void * data)

{

    return 0;

}

static int tty_read(void * data, char * buffer, int size)

{

    return fd_read(data, buffer, size);

}

static int tty_write(void * data, const char * buffer, int size)

{

    return fd_write(data, buffer, size);

}

struct channel_ops tty_channel_ops =

{

    init:   tty_init,

    open:   tty_open,

    close:  generic_close,

    read:   fd_read,

    write:  fd_write,

    free:   generic_free,

};

/*

 * Local variables:

 * c-file-style: "linux"

 * End:

 */