Subversion Repositories or1k

# Makefile.in generated by automake 1.6.3 from Makefile.am.

# @configure_input@

# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002

# Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

@SET_MAKE@

# Makefile -- Makefile for peripherals simulation

# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org

#

# This file is part of OpenRISC 1000 Architectural Simulator.

#

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 2 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program; if not, write to the Free Software

# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

#

SHELL = @SHELL@

srcdir = @srcdir@

top_srcdir = @top_srcdir@

VPATH = @srcdir@

prefix = @prefix@

exec_prefix = @exec_prefix@

bindir = @bindir@

sbindir = @sbindir@

libexecdir = @libexecdir@

datadir = @datadir@

sysconfdir = @sysconfdir@

sharedstatedir = @sharedstatedir@

localstatedir = @localstatedir@

libdir = @libdir@

infodir = @infodir@

mandir = @mandir@

includedir = @includedir@

oldincludedir = /usr/include

pkgdatadir = $(datadir)/@PACKAGE@

pkglibdir = $(libdir)/@PACKAGE@

pkgincludedir = $(includedir)/@PACKAGE@

top_builddir = ..

ACLOCAL = @ACLOCAL@

AUTOCONF = @AUTOCONF@

AUTOMAKE = @AUTOMAKE@

AUTOHEADER = @AUTOHEADER@

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

INSTALL = @INSTALL@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_DATA = @INSTALL_DATA@

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_SCRIPT = @INSTALL_SCRIPT@

INSTALL_HEADER = $(INSTALL_DATA)

transform = @program_transform_name@

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_alias = @build_alias@

build_triplet = @build@

host_alias = @host_alias@

host_triplet = @host@

target_alias = @target_alias@

target_triplet = @target@

EXEEXT = @EXEEXT@

OBJEXT = @OBJEXT@

PATH_SEPARATOR = @PATH_SEPARATOR@

AMTAR = @AMTAR@

AR = @AR@

ARFLAGS = @ARFLAGS@

AWK = @AWK@

BUILD_DIR = @BUILD_DIR@

CC = @CC@

CFLAGS = @CFLAGS@

CPU_ARCH = @CPU_ARCH@

DEPDIR = @DEPDIR@

INCLUDES = @INCLUDES@

INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

LOCAL_CFLAGS = @LOCAL_CFLAGS@

LOCAL_DEFS = @LOCAL_DEFS@

MAKE_SHELL = @MAKE_SHELL@

PACKAGE = @PACKAGE@

RANLIB = @RANLIB@

STRIP = @STRIP@

SUMVERSION = @SUMVERSION@

TERMCAP_LIB = @TERMCAP_LIB@

VERSION = @VERSION@

am__include = @am__include@

am__quote = @am__quote@

host = @host@

host_cpu = @host_cpu@

host_os = @host_os@

install_sh = @install_sh@

SUBDIRS = channels

noinst_LIBRARIES = libperipheral.a

libperipheral_a_SOURCES = \

16450.c                   \

dma.c                     \

mc.c                      \

eth.c                     \

crc32.c                   \

gpio.c                    \

vga.c                     \

fb.c                      \

ps2kbd.c                  \

atahost.c                 \

atadevice.c               \

atadevice_cmdi.c          \

test.c

subdir = peripheral

mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs

CONFIG_HEADER = $(top_builddir)/config.h

CONFIG_CLEAN_FILES =

LIBRARIES = $(noinst_LIBRARIES)

libperipheral_a_AR = $(AR) cru

libperipheral_a_LIBADD =

am_libperipheral_a_OBJECTS = 16450.$(OBJEXT) dma.$(OBJEXT) mc.$(OBJEXT) \

        eth.$(OBJEXT) crc32.$(OBJEXT) gpio.$(OBJEXT) vga.$(OBJEXT) \

        fb.$(OBJEXT) ps2kbd.$(OBJEXT) atahost.$(OBJEXT) \

        atadevice.$(OBJEXT) atadevice_cmdi.$(OBJEXT) test.$(OBJEXT)

libperipheral_a_OBJECTS = $(am_libperipheral_a_OBJECTS)

DEFS = @DEFS@

DEFAULT_INCLUDES =  -I. -I$(srcdir) -I$(top_builddir)

CPPFLAGS = @CPPFLAGS@

LDFLAGS = @LDFLAGS@

LIBS = @LIBS@

depcomp = $(SHELL) $(top_srcdir)/depcomp

am__depfiles_maybe = depfiles

@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/16450.Po ./$(DEPDIR)/atadevice.Po \

@AMDEP_TRUE@    ./$(DEPDIR)/atadevice_cmdi.Po \

@AMDEP_TRUE@    ./$(DEPDIR)/atahost.Po ./$(DEPDIR)/crc32.Po \

@AMDEP_TRUE@    ./$(DEPDIR)/dma.Po ./$(DEPDIR)/eth.Po \

@AMDEP_TRUE@    ./$(DEPDIR)/fb.Po ./$(DEPDIR)/gpio.Po \

@AMDEP_TRUE@    ./$(DEPDIR)/mc.Po ./$(DEPDIR)/ps2kbd.Po \

@AMDEP_TRUE@    ./$(DEPDIR)/test.Po ./$(DEPDIR)/vga.Po

COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \

        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

CCLD = $(CC)

LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@

DIST_SOURCES = $(libperipheral_a_SOURCES)

RECURSIVE_TARGETS = info-recursive dvi-recursive install-info-recursive \

        uninstall-info-recursive all-recursive install-data-recursive \

        install-exec-recursive installdirs-recursive install-recursive \

        uninstall-recursive check-recursive installcheck-recursive

DIST_COMMON = Makefile.am Makefile.in

DIST_SUBDIRS = $(SUBDIRS)

SOURCES = $(libperipheral_a_SOURCES)

all: all-recursive

.SUFFIXES:

.SUFFIXES: .c .o .obj

$(srcdir)/Makefile.in:  Makefile.am  $(top_srcdir)/configure.in $(ACLOCAL_M4)

        cd $(top_srcdir) && \

          $(AUTOMAKE) --gnu  peripheral/Makefile

Makefile:  $(srcdir)/Makefile.in  $(top_builddir)/config.status

        cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)

clean-noinstLIBRARIES:

        -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)

libperipheral.a: $(libperipheral_a_OBJECTS) $(libperipheral_a_DEPENDENCIES)

        -rm -f libperipheral.a

        $(libperipheral_a_AR) libperipheral.a $(libperipheral_a_OBJECTS) $(libperipheral_a_LIBADD)

        $(RANLIB) libperipheral.a

mostlyclean-compile:

        -rm -f *.$(OBJEXT) core *.core

distclean-compile:

        -rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/16450.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atadevice.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atadevice_cmdi.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atahost.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crc32.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dma.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eth.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fb.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpio.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mc.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ps2kbd.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/test.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vga.Po@am__quote@

distclean-depend:

        -rm -rf ./$(DEPDIR)

.c.o:

@AMDEP_TRUE@    source='$<' object='$@' libtool=no @AMDEPBACKSLASH@

@AMDEP_TRUE@    depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@

@AMDEP_TRUE@    $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

        $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$<

.c.obj:

@AMDEP_TRUE@    source='$<' object='$@' libtool=no @AMDEPBACKSLASH@

@AMDEP_TRUE@    depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@

@AMDEP_TRUE@    $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

        $(COMPILE) -c `cygpath -w $<`

CCDEPMODE = @CCDEPMODE@

uninstall-info-am:

# This directory's subdirectories are mostly independent; you can cd

# into them and run `make' without going through this Makefile.

# To change the values of `make' variables: instead of editing Makefiles,

# (1) if the variable is set in `config.status', edit `config.status'

#     (which will cause the Makefiles to be regenerated when you run `make');

# (2) otherwise, pass the desired values on the `make' command line.

$(RECURSIVE_TARGETS):

        @set fnord $$MAKEFLAGS; amf=$$2; \

        dot_seen=no; \

        target=`echo $@ | sed s/-recursive//`; \

        list='$(SUBDIRS)'; for subdir in $$list; do \

          echo "Making $$target in $$subdir"; \

          if test "$$subdir" = "."; then \

            dot_seen=yes; \

            local_target="$$target-am"; \

          else \

            local_target="$$target"; \

          fi; \

          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \

        done; \

        if test "$$dot_seen" = "no"; then \

          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \

        fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \

maintainer-clean-recursive:

        @set fnord $$MAKEFLAGS; amf=$$2; \

        dot_seen=no; \

        case "$@" in \

          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \

          *) list='$(SUBDIRS)' ;; \

        esac; \

        rev=''; for subdir in $$list; do \

          if test "$$subdir" = "."; then :; else \

            rev="$$subdir $$rev"; \

          fi; \

        done; \

        rev="$$rev ."; \

        target=`echo $@ | sed s/-recursive//`; \

        for subdir in $$rev; do \

          echo "Making $$target in $$subdir"; \

          if test "$$subdir" = "."; then \

            local_target="$$target-am"; \

          else \

            local_target="$$target"; \

          fi; \

          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

           || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \

        done && test -z "$$fail"

tags-recursive:

        list='$(SUBDIRS)'; for subdir in $$list; do \

          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \

        done

ETAGS = etags

ETAGSFLAGS =

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)

        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '    { files[$$0] = 1; } \

               END { for (i in files) print i; }'`; \

        mkid -fID $$unique

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \

                $(TAGS_FILES) $(LISP)

        tags=; \

        here=`pwd`; \

        list='$(SUBDIRS)'; for subdir in $$list; do \

          if test "$$subdir" = .; then :; else \

            test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \

          fi; \

        done; \

        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '    { files[$$0] = 1; } \

               END { for (i in files) print i; }'`; \

        test -z "$(ETAGS_ARGS)$$tags$$unique" \

          || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

             $$tags $$unique

GTAGS:

        here=`$(am__cd) $(top_builddir) && pwd` \

          && cd $(top_srcdir) \

          && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:

        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

top_distdir = ..

distdir = $(top_distdir)/$(PACKAGE)-$(VERSION)

distdir: $(DISTFILES)

        @list='$(DISTFILES)'; for file in $$list; do \

          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

          dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \

          if test "$$dir" != "$$file" && test "$$dir" != "."; then \

            dir="/$$dir"; \

            $(mkinstalldirs) "$(distdir)$$dir"; \

          else \

            dir=''; \

          fi; \

          if test -d $$d/$$file; then \

            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

              cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \

            fi; \

            cp -pR $$d/$$file $(distdir)$$dir || exit 1; \

          else \

            test -f $(distdir)/$$file \

            || cp -p $$d/$$file $(distdir)/$$file \

            || exit 1; \

          fi; \

        done

        list='$(SUBDIRS)'; for subdir in $$list; do \

          if test "$$subdir" = .; then :; else \

            test -d $(distdir)/$$subdir \

            || mkdir $(distdir)/$$subdir \

            || exit 1; \

            (cd $$subdir && \

              $(MAKE) $(AM_MAKEFLAGS) \

                top_distdir="$(top_distdir)" \

                distdir=../$(distdir)/$$subdir \

                distdir) \

              || exit 1; \

          fi; \

        done

check-am: all-am

check: check-recursive

all-am: Makefile $(LIBRARIES)

installdirs: installdirs-recursive

installdirs-am:

install: install-recursive

install-exec: install-exec-recursive

install-data: install-data-recursive

uninstall: uninstall-recursive

install-am: all-am

        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive

install-strip:

        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

          INSTALL_STRIP_FLAG=-s \

          `test -z '$(STRIP)' || \

            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

mostlyclean-generic:

clean-generic:

distclean-generic:

        -rm -f Makefile $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:

        @echo "This command is intended for maintainers to use"

        @echo "it deletes files that may require special tools to rebuild."

clean: clean-recursive

clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am

distclean: distclean-recursive

distclean-am: clean-am distclean-compile distclean-depend \

        distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

info: info-recursive

info-am:

install-data-am:

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic

uninstall-am: uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) GTAGS all all-am check check-am clean \

        clean-generic clean-noinstLIBRARIES clean-recursive distclean \

        distclean-compile distclean-depend distclean-generic \

        distclean-recursive distclean-tags distdir dvi dvi-am \

        dvi-recursive info info-am info-recursive install install-am \

        install-data install-data-am install-data-recursive \

        install-exec install-exec-am install-exec-recursive \

        install-info install-info-am install-info-recursive install-man \

        install-recursive install-strip installcheck installcheck-am \

        installdirs installdirs-am installdirs-recursive \

        maintainer-clean maintainer-clean-generic \

        maintainer-clean-recursive mostlyclean mostlyclean-compile \

        mostlyclean-generic mostlyclean-recursive tags tags-recursive \

        uninstall uninstall-am uninstall-info-am \

        uninstall-info-recursive uninstall-recursive

# Tell versions [3.59,3.63) of GNU make to not export all variables.

# Otherwise a system limit (for SysV at least) may be exceeded.

.NOEXPORT: