Subversion Repositories or1k

/* Ethernet test */

#include "support.h"

typedef long off_t;

#include "../peripheral/fields.h"

#include "../peripheral/dma.h"

#include "../peripheral/ethernet.h"

#define ETH_BASE 0x88000000LU

#define DMA_BASE 0x90000000LU

typedef volatile unsigned long *REGISTER;

REGISTER

  eth_moder = (unsigned long *)(ETH_BASE + ETH_MODER),

        eth_int_source = (unsigned long *)(ETH_BASE + ETH_INT_SOURCE),

        eth_int_mask = (unsigned long *)(ETH_BASE + ETH_INT_MASK),

        eth_ipgt = (unsigned long *)(ETH_BASE + ETH_IPGT),

        eth_ipgr1 = (unsigned long *)(ETH_BASE + ETH_IPGR1),

        eth_ipgr2 = (unsigned long *)(ETH_BASE + ETH_IPGR2),

        eth_packetlen = (unsigned long *)(ETH_BASE + ETH_PACKETLEN),

        eth_collconf = (unsigned long *)(ETH_BASE + ETH_COLLCONF),

        eth_rx_bd_num = (unsigned long *)(ETH_BASE + ETH_RX_BD_NUM),

        eth_controlmoder = (unsigned long *)(ETH_BASE + ETH_CTRLMODER),

        eth_miimoder = (unsigned long *)(ETH_BASE + ETH_MIIMODER),

        eth_miicommand = (unsigned long *)(ETH_BASE + ETH_MIICOMMAND),

        eth_miiaddress = (unsigned long *)(ETH_BASE + ETH_MIIADDRESS),

        eth_miitx_data = (unsigned long *)(ETH_BASE + ETH_MIITX_DATA),

        eth_miirx_data = (unsigned long *)(ETH_BASE + ETH_MIIRX_DATA),

        eth_miistatus = (unsigned long *)(ETH_BASE + ETH_MIISTATUS),

        eth_mac_addr0 = (unsigned long *)(ETH_BASE + ETH_MAC_ADDR0),

        eth_mac_addr1 = (unsigned long *)(ETH_BASE + ETH_MAC_ADDR1),

        eth_bd_base = (unsigned long *)(ETH_BASE + ETH_BD_BASE),

        dma_csr = (unsigned long *)(DMA_BASE + DMA_CSR),

        dma_int_msk_a = (unsigned long *)(DMA_BASE + DMA_INT_MSK_A),

        dma_int_msk_b = (unsigned long *)(DMA_BASE + DMA_INT_MSK_B),

        dma_int_src_a = (unsigned long *)(DMA_BASE + DMA_INT_SRC_A),

        dma_int_src_b = (unsigned long *)(DMA_BASE + DMA_INT_SRC_B),

        dma_ch0_csr = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_CSR),

        dma_ch0_sz = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_SZ),

        dma_ch0_a0 = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_A0),

        dma_ch0_am0 = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_AM0),

        dma_ch0_a1 = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_A1),

        dma_ch0_am1 = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_AM1),

        dma_ch0_desc = (unsigned long *)(DMA_BASE + DMA_CH_BASE + DMA_CH_DESC);

struct DMA_DESCRIPTOR

{

        unsigned long csr;

        unsigned long adr0;

        unsigned long adr1;

        unsigned long next;

};

void transmit_one_packet( void )

{

        unsigned i;

        unsigned char packet[1003];

        struct DMA_DESCRIPTOR desc;

        /* Initialize packet */

        for ( i = 0; i < sizeof(packet); ++ i )

                packet[i] = (unsigned char)i;

        /* Set Ethernet BD size */

        *eth_bd_base = sizeof(packet) << ETH_TX_BD_LENGTH_OFFSET;

        /* Set dma stuff */

        desc.csr = 1600; /* transfer size; Ethernet will stop the DMA after packet is sent */

        desc.adr0 = (unsigned long)packet;

        desc.adr1 = ETH_BASE + ETH_DMA_RX_TX;

        desc.csr |= FLAG_MASK( DMA_DESC_CSR, EOL ) | FLAG_MASK( DMA_DESC_CSR, INC_SRC );

        desc.next = 0xDEADDEADUL; /* just to help debugging */

        *dma_ch0_sz = 1UL << DMA_CH_SZ_CHK_SZ_OFFSET; /* Chunk size = 1 word */

        *dma_ch0_desc = (unsigned long)&desc; /* Tell DMA channel where the descriptor is */

        /* Start DMA (it will wait for request from Ethernet) */

        *dma_ch0_csr = FLAG_MASK( DMA_CH_CSR, CH_EN ) /* Enable channel */ |

                FLAG_MASK( DMA_CH_CSR, USE_ED ) /* Use linked lists */ |

                FLAG_MASK( DMA_CH_CSR, MODE ) /* Wait for HW handshake */ |

                FLAG_MASK( DMA_CH_CSR, DST_SEL ) /* Interface 1 is the destination (meaningless for simulation) */;

        /* Start Ethernet */

        *eth_bd_base |= FLAG_MASK( ETH_TX_BD, READY ); /* signal BD as ready */

        *eth_moder |= FLAG_MASK( ETH_MODER, TXEN ) | FLAG_MASK( ETH_MODER, DMAEN );

        /* Now wait till DMA finishes */

        while ( TEST_FLAG( *dma_ch0_csr, DMA_CH_CSR, BUSY ) )

                ;

}

int main()

{

        printf( "Starting Ethernet test\n" );

        transmit_one_packet();

        printf( "Ending Ethernet test\n" );

        report (0xdeaddead);

        return 0;

}