| 1 |
1275 |
phoenix |
/* $Id: timer.h,v 1.1.1.1 2004-04-15 02:40:28 phoenix Exp $
|
| 2 |
|
|
* timer.h: Definitions for the timer chips on the Sparc.
|
| 3 |
|
|
*
|
| 4 |
|
|
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
|
| 5 |
|
|
*/
|
| 6 |
|
|
|
| 7 |
|
|
#include <linux/config.h>
|
| 8 |
|
|
|
| 9 |
|
|
#ifndef _SPARC_TIMER_H
|
| 10 |
|
|
#define _SPARC_TIMER_H
|
| 11 |
|
|
|
| 12 |
|
|
#include <asm/system.h> /* For SUN4M_NCPUS */
|
| 13 |
|
|
#include <asm/sun4paddr.h>
|
| 14 |
|
|
#include <asm/btfixup.h>
|
| 15 |
|
|
|
| 16 |
|
|
/* Timer structures. The interrupt timer has two properties which
|
| 17 |
|
|
* are the counter (which is handled in do_timer in sched.c) and the limit.
|
| 18 |
|
|
* This limit is where the timer's counter 'wraps' around. Oddly enough,
|
| 19 |
|
|
* the sun4c timer when it hits the limit wraps back to 1 and not zero
|
| 20 |
|
|
* thus when calculating the value at which it will fire a microsecond you
|
| 21 |
|
|
* must adjust by one. Thanks SUN for designing such great hardware ;(
|
| 22 |
|
|
*/
|
| 23 |
|
|
|
| 24 |
|
|
/* Note that I am only going to use the timer that interrupts at
|
| 25 |
|
|
* Sparc IRQ 10. There is another one available that can fire at
|
| 26 |
|
|
* IRQ 14. Currently it is left untouched, we keep the PROM's limit
|
| 27 |
|
|
* register value and let the prom take these interrupts. This allows
|
| 28 |
|
|
* L1-A to work.
|
| 29 |
|
|
*/
|
| 30 |
|
|
|
| 31 |
|
|
struct sun4c_timer_info {
|
| 32 |
|
|
__volatile__ unsigned int cur_count10;
|
| 33 |
|
|
__volatile__ unsigned int timer_limit10;
|
| 34 |
|
|
__volatile__ unsigned int cur_count14;
|
| 35 |
|
|
__volatile__ unsigned int timer_limit14;
|
| 36 |
|
|
};
|
| 37 |
|
|
|
| 38 |
|
|
#define SUN4C_TIMER_PHYSADDR 0xf3000000
|
| 39 |
|
|
#ifdef CONFIG_SUN4
|
| 40 |
|
|
#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR
|
| 41 |
|
|
#else
|
| 42 |
|
|
#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR
|
| 43 |
|
|
#endif
|
| 44 |
|
|
|
| 45 |
|
|
/* A sun4m has two blocks of registers which are probably of the same
|
| 46 |
|
|
* structure. LSI Logic's L64851 is told to _decrement_ from the limit
|
| 47 |
|
|
* value. Aurora behaves similarly but its limit value is compacted in
|
| 48 |
|
|
* other fashion (it's wider). Documented fields are defined here.
|
| 49 |
|
|
*/
|
| 50 |
|
|
|
| 51 |
|
|
/* As with the interrupt register, we have two classes of timer registers
|
| 52 |
|
|
* which are per-cpu and master. Per-cpu timers only hit that cpu and are
|
| 53 |
|
|
* only level 14 ticks, master timer hits all cpus and is level 10.
|
| 54 |
|
|
*/
|
| 55 |
|
|
|
| 56 |
|
|
#define SUN4M_PRM_CNT_L 0x80000000
|
| 57 |
|
|
#define SUN4M_PRM_CNT_LVALUE 0x7FFFFC00
|
| 58 |
|
|
|
| 59 |
|
|
struct sun4m_timer_percpu_info {
|
| 60 |
|
|
__volatile__ unsigned int l14_timer_limit; /* Initial value is 0x009c4000 */
|
| 61 |
|
|
__volatile__ unsigned int l14_cur_count;
|
| 62 |
|
|
|
| 63 |
|
|
/* This register appears to be write only and/or inaccessible
|
| 64 |
|
|
* on Uni-Processor sun4m machines.
|
| 65 |
|
|
*/
|
| 66 |
|
|
__volatile__ unsigned int l14_limit_noclear; /* Data access error is here */
|
| 67 |
|
|
|
| 68 |
|
|
__volatile__ unsigned int cntrl; /* =1 after POST on Aurora */
|
| 69 |
|
|
__volatile__ unsigned char space[PAGE_SIZE - 16];
|
| 70 |
|
|
};
|
| 71 |
|
|
|
| 72 |
|
|
struct sun4m_timer_regs {
|
| 73 |
|
|
struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS];
|
| 74 |
|
|
volatile unsigned int l10_timer_limit;
|
| 75 |
|
|
volatile unsigned int l10_cur_count;
|
| 76 |
|
|
|
| 77 |
|
|
/* Again, this appears to be write only and/or inaccessible
|
| 78 |
|
|
* on uni-processor sun4m machines.
|
| 79 |
|
|
*/
|
| 80 |
|
|
volatile unsigned int l10_limit_noclear;
|
| 81 |
|
|
|
| 82 |
|
|
/* This register too, it must be magic. */
|
| 83 |
|
|
volatile unsigned int foobar;
|
| 84 |
|
|
|
| 85 |
|
|
volatile unsigned int cfg; /* equals zero at boot time... */
|
| 86 |
|
|
};
|
| 87 |
|
|
|
| 88 |
|
|
extern struct sun4m_timer_regs *sun4m_timers;
|
| 89 |
|
|
|
| 90 |
|
|
#define SUN4D_PRM_CNT_L 0x80000000
|
| 91 |
|
|
#define SUN4D_PRM_CNT_LVALUE 0x7FFFFC00
|
| 92 |
|
|
|
| 93 |
|
|
struct sun4d_timer_regs {
|
| 94 |
|
|
volatile unsigned int l10_timer_limit;
|
| 95 |
|
|
volatile unsigned int l10_cur_countx;
|
| 96 |
|
|
volatile unsigned int l10_limit_noclear;
|
| 97 |
|
|
volatile unsigned int ctrl;
|
| 98 |
|
|
volatile unsigned int l10_cur_count;
|
| 99 |
|
|
};
|
| 100 |
|
|
|
| 101 |
|
|
extern struct sun4d_timer_regs *sun4d_timers;
|
| 102 |
|
|
|
| 103 |
|
|
extern __volatile__ unsigned int *master_l10_counter;
|
| 104 |
|
|
extern __volatile__ unsigned int *master_l10_limit;
|
| 105 |
|
|
|
| 106 |
|
|
/* FIXME: Make do_[gs]ettimeofday btfixup calls */
|
| 107 |
|
|
BTFIXUPDEF_CALL(void, bus_do_settimeofday, struct timeval *tv)
|
| 108 |
|
|
#define bus_do_settimeofday(tv) BTFIXUP_CALL(bus_do_settimeofday)(tv)
|
| 109 |
|
|
|
| 110 |
|
|
#endif /* !(_SPARC_TIMER_H) */
|
