| 1 |
199 |
simons |
/************************************************************************/
|
| 2 |
|
|
/* */
|
| 3 |
|
|
/* es4h.h: Hardware definition of the ES/4h Ethernet Switch, from */
|
| 4 |
|
|
/* both the host and the 3051's point of view. */
|
| 5 |
|
|
/* NOTE: this name is a misnomer now that there is a PCI */
|
| 6 |
|
|
/* board. Everything that says "es4h" should really be */
|
| 7 |
|
|
/* "se4". But we'll keep the old name for now. */
|
| 8 |
|
|
/* */
|
| 9 |
|
|
/* $Id: dgrs_es4h.h,v 1.1.1.1 2001-09-10 07:44:21 simons Exp $ */
|
| 10 |
|
|
/* */
|
| 11 |
|
|
/************************************************************************/
|
| 12 |
|
|
|
| 13 |
|
|
/************************************************************************/
|
| 14 |
|
|
/* */
|
| 15 |
|
|
/* EISA I/O Registers. These are located at 0x1000 * slot-number */
|
| 16 |
|
|
/* plus the indicated address. I.E. 0x4000-0x4009 for slot 4. */
|
| 17 |
|
|
/* */
|
| 18 |
|
|
/************************************************************************/
|
| 19 |
|
|
|
| 20 |
|
|
#define ES4H_MANUFmsb 0x00 /* Read-only */
|
| 21 |
|
|
#define ES4H_MANUFlsb 0x01 /* Read-only */
|
| 22 |
|
|
# define ES4H_MANUF_CODE 0x1049 /* = "DBI" */
|
| 23 |
|
|
|
| 24 |
|
|
#define ES4H_PRODUCT 0x02 /* Read-only */
|
| 25 |
|
|
# define ES4H_PRODUCT_CODE 0x0A
|
| 26 |
|
|
# define EPC_PRODUCT_CODE 0x03
|
| 27 |
|
|
|
| 28 |
|
|
#define ES4H_REVISION 0x03 /* Read-only */
|
| 29 |
|
|
# define ES4H_REVISION_CODE 0x01
|
| 30 |
|
|
|
| 31 |
|
|
#define ES4H_EC 0x04 /* EISA Control */
|
| 32 |
|
|
# define ES4H_EC_RESET 0x04 /* WO, EISA reset */
|
| 33 |
|
|
# define ES4H_EC_ENABLE 0x01 /* RW, EISA enable - set to */
|
| 34 |
|
|
/* 1 before memory enable */
|
| 35 |
|
|
#define ES4H_PC 0x05 /* Processor Control */
|
| 36 |
|
|
# define ES4H_PC_RESET 0x04 /* RW, 3051 reset */
|
| 37 |
|
|
# define ES4H_PC_INT 0x08 /* WO, assert 3051 intr. 3 */
|
| 38 |
|
|
|
| 39 |
|
|
#define ES4H_MW 0x06 /* Memory Window select and enable */
|
| 40 |
|
|
# define ES4H_MW_ENABLE 0x80 /* WO, enable memory */
|
| 41 |
|
|
# define ES4H_MW_SELECT_MASK 0x1f /* WO, 32k window selected */
|
| 42 |
|
|
|
| 43 |
|
|
#define ES4H_IS 0x07 /* Interrupt, addr select */
|
| 44 |
|
|
# define ES4H_IS_INTMASK 0x07 /* WO, interrupt select */
|
| 45 |
|
|
# define ES4H_IS_INTOFF 0x00 /* No IRQ */
|
| 46 |
|
|
# define ES4H_IS_INT3 0x03 /* IRQ 3 */
|
| 47 |
|
|
# define ES4H_IS_INT5 0x02 /* IRQ 5 */
|
| 48 |
|
|
# define ES4H_IS_INT7 0x01 /* IRQ 7 */
|
| 49 |
|
|
# define ES4H_IS_INT10 0x04 /* IRQ 10 */
|
| 50 |
|
|
# define ES4H_IS_INT11 0x05 /* IRQ 11 */
|
| 51 |
|
|
# define ES4H_IS_INT12 0x06 /* IRQ 12 */
|
| 52 |
|
|
# define ES4H_IS_INT15 0x07 /* IRQ 15 */
|
| 53 |
|
|
# define ES4H_IS_INTACK 0x10 /* WO, interrupt ack */
|
| 54 |
|
|
# define ES4H_IS_INTPEND 0x10 /* RO, interrupt pending */
|
| 55 |
|
|
# define ES4H_IS_LINEAR 0x40 /* WO, no memory windowing */
|
| 56 |
|
|
# define ES4H_IS_AS15 0x80 /* RW, address select bit 15 */
|
| 57 |
|
|
|
| 58 |
|
|
#define ES4H_AS_23_16 0x08 /* Address select bits 23-16 */
|
| 59 |
|
|
#define ES4H_AS_31_24 0x09 /* Address select bits 31-24 */
|
| 60 |
|
|
|
| 61 |
|
|
#define ES4H_IO_MAX 0x09 /* Size of I/O space */
|
| 62 |
|
|
|
| 63 |
|
|
/*
|
| 64 |
|
|
* PCI
|
| 65 |
|
|
*/
|
| 66 |
|
|
#define SE6_RESET PLX_USEROUT
|
| 67 |
|
|
|
| 68 |
|
|
/************************************************************************/
|
| 69 |
|
|
/* */
|
| 70 |
|
|
/* 3051 Memory Map */
|
| 71 |
|
|
/* */
|
| 72 |
|
|
/* Note: 3051 has 4K I-cache, 2K D-cache. 1 cycle is 50 nsec. */
|
| 73 |
|
|
/* */
|
| 74 |
|
|
/************************************************************************/
|
| 75 |
|
|
#define SE4_NPORTS 4 /* # of ethernet ports */
|
| 76 |
|
|
#define SE6_NPORTS 6 /* # of ethernet ports */
|
| 77 |
|
|
#define SE_NPORTS 6 /* Max # of ethernet ports */
|
| 78 |
|
|
|
| 79 |
|
|
#define ES4H_RAM_BASE 0x83000000 /* Base address of RAM */
|
| 80 |
|
|
#define ES4H_RAM_SIZE 0x00200000 /* Size of RAM (2MB) */
|
| 81 |
|
|
#define ES4H_RAM_INTBASE 0x83800000 /* Base of int-on-write RAM */
|
| 82 |
|
|
/* a.k.a. PKT RAM */
|
| 83 |
|
|
|
| 84 |
|
|
/* Ethernet controllers */
|
| 85 |
|
|
/* See: i82596.h */
|
| 86 |
|
|
#define ES4H_ETHER0_PORT 0xA2000000
|
| 87 |
|
|
#define ES4H_ETHER0_CMD 0xA2000100
|
| 88 |
|
|
#define ES4H_ETHER1_PORT 0xA2000200
|
| 89 |
|
|
#define ES4H_ETHER1_CMD 0xA2000300
|
| 90 |
|
|
#define ES4H_ETHER2_PORT 0xA2000400
|
| 91 |
|
|
#define ES4H_ETHER2_CMD 0xA2000500
|
| 92 |
|
|
#define ES4H_ETHER3_PORT 0xA2000600
|
| 93 |
|
|
#define ES4H_ETHER3_CMD 0xA2000700
|
| 94 |
|
|
#define ES4H_ETHER4_PORT 0xA2000800 /* RS SE-6 only */
|
| 95 |
|
|
#define ES4H_ETHER4_CMD 0xA2000900 /* RS SE-6 only */
|
| 96 |
|
|
#define ES4H_ETHER5_PORT 0xA2000A00 /* RS SE-6 only */
|
| 97 |
|
|
#define ES4H_ETHER5_CMD 0xA2000B00 /* RS SE-6 only */
|
| 98 |
|
|
|
| 99 |
|
|
#define ES4H_I8254 0xA2040000 /* 82C54 timers */
|
| 100 |
|
|
/* See: i8254.h */
|
| 101 |
|
|
|
| 102 |
|
|
#define SE4_I8254_HZ (23000000/4) /* EISA clock input freq. */
|
| 103 |
|
|
#define SE4_IDT_HZ (46000000) /* EISA CPU freq. */
|
| 104 |
|
|
#define SE6_I8254_HZ (20000000/4) /* PCI clock input freq. */
|
| 105 |
|
|
#define SE6_IDT_HZ (50000000) /* PCI CPU freq. */
|
| 106 |
|
|
#define ES4H_I8254_HZ (23000000/4) /* EISA clock input freq. */
|
| 107 |
|
|
|
| 108 |
|
|
#define ES4H_GPP 0xA2050000 /* General purpose port */
|
| 109 |
|
|
/*
|
| 110 |
|
|
* SE-4 (EISA) GPP bits
|
| 111 |
|
|
*/
|
| 112 |
|
|
# define ES4H_GPP_C0_100 0x0001 /* WO, Chan 0: 100 ohm TP */
|
| 113 |
|
|
# define ES4H_GPP_C0_SQE 0x0002 /* WO, Chan 0: normal squelch */
|
| 114 |
|
|
# define ES4H_GPP_C1_100 0x0004 /* WO, Chan 1: 100 ohm TP */
|
| 115 |
|
|
# define ES4H_GPP_C1_SQE 0x0008 /* WO, Chan 1: normal squelch */
|
| 116 |
|
|
# define ES4H_GPP_C2_100 0x0010 /* WO, Chan 2: 100 ohm TP */
|
| 117 |
|
|
# define ES4H_GPP_C2_SQE 0x0020 /* WO, Chan 2: normal squelch */
|
| 118 |
|
|
# define ES4H_GPP_C3_100 0x0040 /* WO, Chan 3: 100 ohm TP */
|
| 119 |
|
|
# define ES4H_GPP_C3_SQE 0x0080 /* WO, Chan 3: normal squelch */
|
| 120 |
|
|
# define ES4H_GPP_SQE 0x00AA /* WO, All: normal squelch */
|
| 121 |
|
|
# define ES4H_GPP_100 0x0055 /* WO, All: 100 ohm TP */
|
| 122 |
|
|
# define ES4H_GPP_HOSTINT 0x0100 /* RO, cause intr. to host */
|
| 123 |
|
|
/* Hold high > 250 nsec */
|
| 124 |
|
|
# define SE4_GPP_EED 0x0200 /* RW, EEPROM data bit */
|
| 125 |
|
|
# define SE4_GPP_EECS 0x0400 /* RW, EEPROM chip select */
|
| 126 |
|
|
# define SE4_GPP_EECK 0x0800 /* RW, EEPROM clock */
|
| 127 |
|
|
|
| 128 |
|
|
/*
|
| 129 |
|
|
* SE-6 (PCI) GPP bits
|
| 130 |
|
|
*/
|
| 131 |
|
|
# define SE6_GPP_EED 0x0001 /* RW, EEPROM data bit */
|
| 132 |
|
|
# define SE6_GPP_EECS 0x0002 /* RW, EEPROM chip select */
|
| 133 |
|
|
# define SE6_GPP_EECK 0x0004 /* RW, EEPROM clock */
|
| 134 |
|
|
# define SE6_GPP_LINK 0x00fc /* R, Link status LEDs */
|
| 135 |
|
|
|
| 136 |
|
|
#define ES4H_INTVEC 0xA2060000 /* RO: Interrupt Vector */
|
| 137 |
|
|
# define ES4H_IV_DMA0 0x01 /* Chan 0 DMA interrupt */
|
| 138 |
|
|
# define ES4H_IV_PKT0 0x02 /* Chan 0 PKT interrupt */
|
| 139 |
|
|
# define ES4H_IV_DMA1 0x04 /* Chan 1 DMA interrupt */
|
| 140 |
|
|
# define ES4H_IV_PKT1 0x08 /* Chan 1 PKT interrupt */
|
| 141 |
|
|
# define ES4H_IV_DMA2 0x10 /* Chan 2 DMA interrupt */
|
| 142 |
|
|
# define ES4H_IV_PKT2 0x20 /* Chan 2 PKT interrupt */
|
| 143 |
|
|
# define ES4H_IV_DMA3 0x40 /* Chan 3 DMA interrupt */
|
| 144 |
|
|
# define ES4H_IV_PKT3 0x80 /* Chan 3 PKT interrupt */
|
| 145 |
|
|
|
| 146 |
|
|
#define ES4H_INTACK 0xA2060000 /* WO: Interrupt Ack */
|
| 147 |
|
|
# define ES4H_INTACK_8254 0x01 /* Real Time Clock (int 0) */
|
| 148 |
|
|
# define ES4H_INTACK_HOST 0x02 /* Host (int 1) */
|
| 149 |
|
|
# define ES4H_INTACK_PKT0 0x04 /* Chan 0 Pkt (int 2) */
|
| 150 |
|
|
# define ES4H_INTACK_PKT1 0x08 /* Chan 1 Pkt (int 3) */
|
| 151 |
|
|
# define ES4H_INTACK_PKT2 0x10 /* Chan 2 Pkt (int 4) */
|
| 152 |
|
|
# define ES4H_INTACK_PKT3 0x20 /* Chan 3 Pkt (int 5) */
|
| 153 |
|
|
|
| 154 |
|
|
#define SE6_PLX 0xA2070000 /* PLX 9060, SE-6 (PCI) only */
|
| 155 |
|
|
/* see plx9060.h */
|
| 156 |
|
|
|
| 157 |
|
|
#define SE6_PCI_VENDOR_ID 0x114F /* Digi PCI vendor ID */
|
| 158 |
|
|
#define SE6_PCI_DEVICE_ID 0x0003 /* RS SE-6 device ID */
|
| 159 |
|
|
#define SE6_PCI_ID ((SE6_PCI_DEVICE_ID<<16) | SE6_PCI_VENDOR_ID)
|
| 160 |
|
|
|
| 161 |
|
|
/*
|
| 162 |
|
|
* IDT Interrupts
|
| 163 |
|
|
*/
|
| 164 |
|
|
#define ES4H_INT_8254 IDT_INT0
|
| 165 |
|
|
#define ES4H_INT_HOST IDT_INT1
|
| 166 |
|
|
#define ES4H_INT_ETHER0 IDT_INT2
|
| 167 |
|
|
#define ES4H_INT_ETHER1 IDT_INT3
|
| 168 |
|
|
#define ES4H_INT_ETHER2 IDT_INT4
|
| 169 |
|
|
#define ES4H_INT_ETHER3 IDT_INT5
|
| 170 |
|
|
|
| 171 |
|
|
/*
|
| 172 |
|
|
* Because there are differences between the SE-4 and the SE-6,
|
| 173 |
|
|
* we assume that the following globals will be set up at init
|
| 174 |
|
|
* time in main.c to containt the appropriate constants from above
|
| 175 |
|
|
*/
|
| 176 |
|
|
extern ushort Gpp; /* Softcopy of GPP register */
|
| 177 |
|
|
extern ushort EEck; /* Clock bit */
|
| 178 |
|
|
extern ushort EEcs; /* CS bit */
|
| 179 |
|
|
extern ushort EEd; /* Data bit */
|
| 180 |
|
|
extern ulong I8254_Hz; /* i8254 input frequency */
|
| 181 |
|
|
extern ulong IDT_Hz; /* IDT CPU frequency */
|
| 182 |
|
|
extern int Nports; /* Number of ethernet controllers */
|
| 183 |
|
|
extern int Nchan; /* Nports+1 */
|
