Subversion Repositories or1k

/* ne.c: A general non-shared-memory NS8390 ethernet driver for linux. */

/*

    Written 1992-94 by Donald Becker.

    Copyright 1993 United States Government as represented by the

    Director, National Security Agency.

    This software may be used and distributed according to the terms

    of the GNU Public License, incorporated herein by reference.

    The author may be reached as becker@CESDIS.gsfc.nasa.gov, or C/O

    Center of Excellence in Space Data and Information Sciences

        Code 930.5, Goddard Space Flight Center, Greenbelt MD 20771

    This driver should work with many programmed-I/O 8390-based ethernet

    boards.  Currently it supports the NE1000, NE2000, many clones,

    and some Cabletron products.

    Changelog:

    Paul Gortmaker      : use ENISR_RDC to monitor Tx PIO uploads, made

                          sanity checks and bad clone support optional.

    Paul Gortmaker      : new reset code, reset card after probe at boot.

    Paul Gortmaker      : multiple card support for module users.

    Paul Gortmaker      : Support for PCI ne2k clones, similar to lance.c

    Paul Gortmaker      : Allow users with bad cards to avoid full probe.

    Paul Gortmaker      : PCI probe changes, more PCI cards supported.

    Greg Ungerer        : added some coldfire addressing code.

*/

/* Routines for the NatSemi-based designs (NE[12]000). */

static const char *version =

    "ne.c:v1.10 9/23/94 Donald Becker (becker@cesdis.gsfc.nasa.gov)\n";

#include <linux/module.h>

#include <linux/config.h>

#include <linux/kernel.h>

#include <linux/sched.h>

#include <linux/errno.h>

#ifdef CONFIG_PCI

#include <linux/pci.h>

#include <linux/bios32.h>

#endif

#include <asm/system.h>

#include <asm/io.h>

#include <linux/delay.h>

#include <linux/netdevice.h>

#include <linux/etherdevice.h>

#include "8390.h"

#ifdef CONFIG_COLDFIRE

#define COLDFIRE_NE2000_FUNCS

#include <asm/coldfire.h>

#include <asm/mcfsim.h>

#include <asm/mcfne.h>

unsigned char   ne_defethaddr[] = { 0x00, 0xd0, 0xcf, 0x00, 0x00, 0x01 };

#endif /* CONFIG_COLDFIRE */

/* Some defines that people can play with if so inclined. */

/* Do we support clones that don't adhere to 14,15 of the SAprom ? */

#define SUPPORT_NE_BAD_CLONES

/* Do we perform extra sanity checks on stuff ? */

/* #define NE_SANITY_CHECK */

/* Do we implement the read before write bugfix ? */

/* #define NE_RW_BUGFIX */

/* Do we have a non std. amount of memory? (in units of 256 byte pages) */

/* #define PACKETBUF_MEMSIZE    0x40 */

#if defined(HAVE_DEVLIST) || !defined(MODULE)

/* A zero-terminated list of I/O addresses to be probed. */

static unsigned int netcard_portlist[] =

{ 0x300, 0x280, 0x320, 0x340, 0x360, 0};

#endif /* defined(HAVE_DEVLIST) || !defined(MODULE) */

#ifdef CONFIG_PCI

/* Ack! People are making PCI ne2000 clones! Oh the horror, the horror... */

static struct { unsigned short vendor, dev_id;}

pci_clone_list[] = {

        {PCI_VENDOR_ID_REALTEK,         PCI_DEVICE_ID_REALTEK_8029},

        {PCI_VENDOR_ID_WINBOND2,        PCI_DEVICE_ID_WINBOND2_89C940},

        {PCI_VENDOR_ID_COMPEX,          PCI_DEVICE_ID_COMPEX_RL2000},

        {PCI_VENDOR_ID_KTI,             PCI_DEVICE_ID_KTI_ET32P2},

        {PCI_VENDOR_ID_NETVIN,          PCI_DEVICE_ID_NETVIN_NV5000SC},

        {PCI_VENDOR_ID_VIA,             PCI_DEVICE_ID_VIA_82C926},

        {0,}

};

#endif

#ifdef SUPPORT_NE_BAD_CLONES

/* A list of bad clones that we none-the-less recognize. */

static struct { const char *name8, *name16; unsigned char SAprefix[4];}

bad_clone_list[] = {

    {"DE100", "DE200", {0x00, 0xDE, 0x01,}},

    {"DE120", "DE220", {0x00, 0x80, 0xc8,}},

    {"DFI1000", "DFI2000", {'D', 'F', 'I',}}, /* Original, eh?  */

    {"EtherNext UTP8", "EtherNext UTP16", {0x00, 0x00, 0x79}},

    {"NE1000","NE2000-invalid", {0x00, 0x00, 0xd8}}, /* Ancient real NE1000. */

    {"NN1000", "NN2000",  {0x08, 0x03, 0x08}}, /* Outlaw no-name clone. */

    {"4-DIM8","4-DIM16", {0x00,0x00,0x4d,}},  /* Outlaw 4-Dimension cards. */

    {"Con-Intl_8", "Con-Intl_16", {0x00, 0x00, 0x24}}, /* Connect Int'nl */

    {"ET-100","ET-200", {0x00, 0x45, 0x54}}, /* YANG and YA clone */

    {"COMPEX","COMPEX16",{0x00,0x80,0x48}}, /* Broken ISA Compex cards */

    {"E-LAN100", "E-LAN200", {0x00, 0x00, 0x5d}}, /* Broken ne1000 clones */

    {"PCM-4823", "PCM-4823", {0x00, 0xc0, 0x6c}}, /* Broken Advantech MoBo */

    {0,}

};

#endif

/* ---- No user-serviceable parts below ---- */

#define NE_BASE  (dev->base_addr)

#define NE_CMD          0x00

#define NE_DATAPORT     0x10    /* NatSemi-defined port window offset. */

#define NE_RESET        0x1f    /* Issue a read to reset, a write to clear. */

#define NE_IO_EXTENT    0x20

#define NE1SM_START_PG  0x20    /* First page of TX buffer */

#define NE1SM_STOP_PG   0x40    /* Last page +1 of RX ring */

#define NESM_START_PG   0x40    /* First page of TX buffer */

#define NESM_STOP_PG    0x80    /* Last page +1 of RX ring */

/* Non-zero only if the current card is a PCI with BIOS-set IRQ. */

static unsigned char pci_irq_line = 0;

int ne_probe(struct device *dev);

#ifdef CONFIG_PCI

static int ne_probe_pci(struct device *dev);

#endif

static int ne_probe1(struct device *dev, int ioaddr);

static int ne_open(struct device *dev);

static int ne_close(struct device *dev);

static void ne_reset_8390(struct device *dev);

static void ne_get_8390_hdr(struct device *dev, struct e8390_pkt_hdr *hdr,

                          int ring_page);

static void ne_block_input(struct device *dev, int count,

                          struct sk_buff *skb, int ring_offset);

static void ne_block_output(struct device *dev, const int count,

                const unsigned char *buf, const int start_page);

/*  Probe for various non-shared-memory ethercards.

   NEx000-clone boards have a Station Address PROM (SAPROM) in the packet

   buffer memory space.  NE2000 clones have 0x57,0x57 in bytes 0x0e,0x0f of

   the SAPROM, while other supposed NE2000 clones must be detected by their

   SA prefix.

   Reading the SAPROM from a word-wide card with the 8390 set in byte-wide

   mode results in doubled values, which can be detected and compensated for.

   The probe is also responsible for initializing the card and filling

   in the 'dev' and 'ei_status' structures.

   We use the minimum memory size for some ethercard product lines, iff we can't

   distinguish models.  You can increase the packet buffer size by setting

   PACKETBUF_MEMSIZE.  Reported Cabletron packet buffer locations are:

        E1010   starts at 0x100 and ends at 0x2000.

        E1010-x starts at 0x100 and ends at 0x8000. ("-x" means "more memory")

        E2010    starts at 0x100 and ends at 0x4000.

        E2010-x starts at 0x100 and ends at 0xffff.  */

#ifdef HAVE_DEVLIST

struct netdev_entry netcard_drv =

{"ne", ne_probe1, NE_IO_EXTENT, netcard_portlist};

#else

/*  Note that this probe only picks up one card at a time, even for multiple

    PCI ne2k cards. Use "ether=0,0,eth1" if you have a second PCI ne2k card.

    This keeps things consistent regardless of the bus type of the card. */

int ne_probe(struct device *dev)

{

#ifndef MODULE

    int i;

#endif /* MODULE */

    int base_addr = dev ? dev->base_addr : 0;

#ifdef CONFIG_COLDFIRE

#ifdef CONFIG_NETtel

    dev->base_addr = base_addr = NE2000_ADDR + NE2000_ISA_IO;

#else

    dev->base_addr = base_addr = NE2000_ISA_IO;

#endif

    dev->irq = NE2000_ISA_IRQ;

#if 1

printk("%s(%d): IO=%x irq=%d\n", __FILE__, __LINE__, dev->base_addr, dev->irq);

#endif

#endif

    /* First check any supplied i/o locations. User knows best. <cough> */

    if (base_addr > 0x1ff)      /* Check a single specified location. */

        return ne_probe1(dev, base_addr);

    else if (base_addr != 0)     /* Don't probe at all. */

        return ENXIO;

#ifdef CONFIG_PCI

    /* Then look for any installed PCI clones */

    if (pcibios_present() && (ne_probe_pci(dev) == 0))

  return 0;

#endif

#ifndef MODULE

    /* Last resort. The semi-risky ISA auto-probe. */

    for (i = 0; netcard_portlist[i]; i++) {

        int ioaddr = netcard_portlist[i];

        if (check_region(ioaddr, NE_IO_EXTENT))

            continue;

        if (ne_probe1(dev, ioaddr) == 0)

            return 0;

    }

#endif

    return ENODEV;

}

#endif

#ifdef CONFIG_PCI

static int ne_probe_pci(struct device *dev)

{

        int i;

        for (i = 0; pci_clone_list[i].vendor != 0; i++) {

                unsigned char pci_bus, pci_device_fn;

                unsigned int pci_ioaddr;

                u16 pci_command, new_command;

                int pci_index;

                for (pci_index = 0; pci_index < 8; pci_index++) {

                        if (pcibios_find_device (pci_clone_list[i].vendor,

                                        pci_clone_list[i].dev_id, pci_index,

                                        &pci_bus, &pci_device_fn) != 0)

                                break;  /* No more of these type of cards */

                        pcibios_read_config_dword(pci_bus, pci_device_fn,

                                        PCI_BASE_ADDRESS_0, &pci_ioaddr);

                        /* Strip the I/O address out of the returned value */

                        pci_ioaddr &= PCI_BASE_ADDRESS_IO_MASK;

                        /* Avoid already found cards from previous calls */

                        if (check_region(pci_ioaddr, NE_IO_EXTENT))

                                continue;

                        pcibios_read_config_byte(pci_bus, pci_device_fn,

                                        PCI_INTERRUPT_LINE, &pci_irq_line);

                        break;  /* Beauty -- got a valid card. */

                }

                if (pci_irq_line == 0) continue; /* Try next PCI ID */

                printk("ne.c: PCI BIOS reports NE 2000 clone at i/o %#x, irq %d.\n",

                                pci_ioaddr, pci_irq_line);

                pcibios_read_config_word(pci_bus, pci_device_fn,

                                        PCI_COMMAND, &pci_command);

                /* Activate the card: fix for brain-damaged Win98 BIOSes. */

                new_command = pci_command | PCI_COMMAND_IO;

                if (pci_command != new_command) {

                        printk(KERN_INFO "  The PCI BIOS has not enabled this"

                                " NE2k clone!  Updating PCI command %4.4x->%4.4x.\n",

                                        pci_command, new_command);

                        pcibios_write_config_word(pci_bus, pci_device_fn,

                                        PCI_COMMAND, new_command);

                }

                if (ne_probe1(dev, pci_ioaddr) != 0) {   /* Shouldn't happen. */

                        printk(KERN_ERR "ne.c: Probe of PCI card at %#x failed.\n", pci_ioaddr);

                        pci_irq_line = 0;

                        return -ENXIO;

                }

                pci_irq_line = 0;

                return 0;

        }

        return -ENODEV;

}

#endif  /* CONFIG_PCI */

static int ne_probe1(struct device *dev, int ioaddr)

{

    int i;

    unsigned char SA_prom[32];

    int wordlength = 2;

    const char *name = NULL;

    int start_page, stop_page;

    int neX000, ctron, bad_card;

    int reg0 = inb_p(ioaddr);

    static unsigned version_printed = 0;

#if 1

        printk("%s(%d): ne_probe1() ioaddr=%x\n", __FILE__, __LINE__, ioaddr);

#endif

    if (reg0 == 0xFF)

        return ENODEV;

    /* Do a preliminary verification that we have a 8390. */

    {   int regd;

        outb_p(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);

        regd = inb_p(ioaddr + 0x0d);

        outb_p(0xff, ioaddr + 0x0d);

        outb_p(E8390_NODMA+E8390_PAGE0, ioaddr + E8390_CMD);

        inb_p(ioaddr + EN0_COUNTER0); /* Clear the counter by reading. */

        if (inb_p(ioaddr + EN0_COUNTER0) != 0) {

            outb_p(reg0, ioaddr);

            outb_p(regd, ioaddr + 0x0d);        /* Restore the old values. */

            return ENODEV;

        }

    }

    /* We should have a "dev" from Space.c or the static module table. */

    if (dev == NULL) {

        printk(KERN_ERR "ne.c: Passed a NULL device.\n");

        dev = init_etherdev(0, 0);

    }

    if (ei_debug  &&  version_printed++ == 0)

        printk(version);

    printk("NE*000 ethercard probe at %#3x:", ioaddr);

    /* A user with a poor card that fails to ack the reset, or that

       does not have a valid 0x57,0x57 signature can still use this

       without having to recompile. Specifying an i/o address along

       with an otherwise unused dev->mem_end value of "0xBAD" will

       cause the driver to skip these parts of the probe. */

    bad_card = ((dev->base_addr != 0) && (dev->mem_end == 0xbad));

#if 0

    /* Reset card. Who knows what dain-bramaged state it was left in. */

    {   unsigned long reset_start_time = jiffies;

        /* DON'T change these to inb_p/outb_p or reset will fail on clones. */

        outb(inb(ioaddr + NE_RESET), ioaddr + NE_RESET);

        while ((inb_p(ioaddr + EN0_ISR) & ENISR_RESET) == 0)

                if (jiffies - reset_start_time > 2*HZ/100) {

                        if (bad_card) {

                                printk(" (warning: no reset ack)");

                                break;

                        } else {

                                printk(" not found (no reset ack).\n");

                                return ENODEV;

                        }

                }

        outb_p(0xff, ioaddr + EN0_ISR);         /* Ack all intr. */

    }

#endif

    /* Read the 16 bytes of station address PROM.

       We must first initialize registers, similar to NS8390_init(eifdev, 0).

       We can't reliably read the SAPROM address without this.

       (I learned the hard way!). */

    {

        struct {unsigned char value, offset; } program_seq[] = {

            {E8390_NODMA+E8390_PAGE0+E8390_STOP, E8390_CMD}, /* Select page 0*/

            {0x48,      EN0_DCFG},      /* Set byte-wide (0x48) access. */

            {0x00,      EN0_RCNTLO},    /* Clear the count regs. */

            {0x00,      EN0_RCNTHI},

            {0x00,      EN0_IMR},       /* Mask completion irq. */

            {0xFF,      EN0_ISR},

            {E8390_RXOFF, EN0_RXCR},    /* 0x20  Set to monitor */

            {E8390_TXOFF, EN0_TXCR},    /* 0x02  and loopback mode. */

            {32,        EN0_RCNTLO},

            {0x00,      EN0_RCNTHI},

            {0x00,      EN0_RSARLO},    /* DMA starting at 0x0000. */

            {0x00,      EN0_RSARHI},

            {E8390_RREAD+E8390_START, E8390_CMD},

        };

        for (i = 0; i < sizeof(program_seq)/sizeof(program_seq[0]); i++)

            outb_p(program_seq[i].value, ioaddr + program_seq[i].offset);

    }

    for(i = 0; i < 32 /*sizeof(SA_prom)*/; i+=2) {

        SA_prom[i] = inb(ioaddr + NE_DATAPORT);

        SA_prom[i+1] = inb(ioaddr + NE_DATAPORT);

        if (SA_prom[i] != SA_prom[i+1])

            wordlength = 1;

    }

    /*  At this point, wordlength *only* tells us if the SA_prom is doubled

        up or not because some broken PCI cards don't respect the byte-wide

        request in program_seq above, and hence don't have doubled up values.

        These broken cards would otherwise be detected as an ne1000.  */

    if (wordlength == 2)

        for (i = 0; i < 16; i++)

                SA_prom[i] = SA_prom[i+i];

#ifdef CONFIG_M5307

    {

        outb_p(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);

        for(i = 0; i < 6; i++)

        {

                SA_prom[i] = inb(ioaddr + i + 1);

        }

        SA_prom[14] = SA_prom[15] = 0x57;

    }

#endif /* CONFIG_M5307 */

#ifdef CONFIG_NETtel

    {

        unsigned char *ep = (unsigned char *) 0xf0006000;

        unsigned char val;

        /*

         * MAC address should be in FLASH, check that it is valid.

         * If good use it, otherwise use the default.

         */

        if ((ep[0] == 0xff) && (ep[1] == 0xff) && (ep[2] == 0xff) &&

            (ep[3] == 0xff) && (ep[4] == 0xff) && (ep[5] == 0xff))

                ep = (unsigned char *) &ne_defethaddr[0];

        else if ((ep[0] == 0) && (ep[1] == 0) && (ep[2] == 0) &&

            (ep[3] == 0) && (ep[4] == 0) && (ep[5] == 0))

        ep = (unsigned char *) &ne_defethaddr[0];

        for(i = 0; i < 6; i++)

                SA_prom[i] = ep[i];

        SA_prom[14] = SA_prom[15] = 0x57;

#if 0

        /*

         * Set ethernet interface to be AUI.

         */

        val = inb_p(ioaddr + EN0_RCNTHI);

        outb_p(0x01 , (ioaddr + EN0_RCNTHI));

#endif

        wordlength = 1;

        /* We must set the 8390 for 8bit mode. */

        outb_p(0x48, ioaddr + EN0_DCFG);

        start_page = NESM_START_PG;

        stop_page = NESM_STOP_PG;

    }

#else defined(CONFIG_M5206e)

    {

        outb_p(E8390_NODMA+E8390_PAGE1+E8390_STOP, ioaddr + E8390_CMD);

        for(i = 0; i < 6; i++)

        {

                SA_prom[i] = inb(ioaddr + i + 1);

        }

        SA_prom[14] = SA_prom[15] = 0x57;

    }

#endif /* CONFIG_M5206e */

#ifndef CONFIG_COLDFIRE

    if (pci_irq_line || ioaddr >= 0x400)

        wordlength = 2;         /* Catch broken PCI cards mentioned above. */

#endif

#ifndef CONFIG_NETtel

    if (wordlength == 2) {

        /* We must set the 8390 for word mode. */

        outb_p(0x49, ioaddr + EN0_DCFG);

        start_page = NESM_START_PG;

        stop_page = NESM_STOP_PG;

    } else {

        start_page = NE1SM_START_PG;

        stop_page = NE1SM_STOP_PG;

    }

#endif

    neX000 = (SA_prom[14] == 0x57  &&  SA_prom[15] == 0x57);

    ctron =  (SA_prom[0] == 0x00 && SA_prom[1] == 0x00 && SA_prom[2] == 0x1d);

    /* Set up the rest of the parameters. */

    if (neX000 || bad_card) {

        name = (wordlength == 2) ? "NE2000" : "NE1000";

    } else if (ctron) {

        name = (wordlength == 2) ? "Ctron-8" : "Ctron-16";

        start_page = 0x01;

        stop_page = (wordlength == 2) ? 0x40 : 0x20;

    } else {

#ifdef SUPPORT_NE_BAD_CLONES

        /* Ack!  Well, there might be a *bad* NE*000 clone there.

           Check for total bogus addresses. */

        for (i = 0; bad_clone_list[i].name8; i++) {

            if (SA_prom[0] == bad_clone_list[i].SAprefix[0] &&

                SA_prom[1] == bad_clone_list[i].SAprefix[1] &&

                SA_prom[2] == bad_clone_list[i].SAprefix[2]) {

                if (wordlength == 2) {

                    name = bad_clone_list[i].name16;

                } else {

                    name = bad_clone_list[i].name8;

                }

                break;

            }

        }

        if (bad_clone_list[i].name8 == NULL) {

            printk(" not found (invalid signature %2.2x %2.2x).\n",

                   SA_prom[14], SA_prom[15]);

            return ENXIO;

        }

#else

        printk(" not found.\n");

        return ENXIO;

#endif

    }

    if (pci_irq_line)

        dev->irq = pci_irq_line;

    if (dev->irq < 2) {

        autoirq_setup(0);

        outb_p(0x50, ioaddr + EN0_IMR); /* Enable one interrupt. */

        outb_p(0x00, ioaddr + EN0_RCNTLO);

        outb_p(0x00, ioaddr + EN0_RCNTHI);

        outb_p(E8390_RREAD+E8390_START, ioaddr); /* Trigger it... */

        udelay(10000);          /* wait 10ms for interrupt to propagate */

        outb_p(0x00, ioaddr + EN0_IMR);                 /* Mask it again. */

        dev->irq = autoirq_report(0);

        if (ei_debug > 2)

            printk(" autoirq is %d\n", dev->irq);

    } else if (dev->irq == 2)

        /* Fixup for users that don't know that IRQ 2 is really IRQ 9,

           or don't know which one to set. */

        dev->irq = 9;

    if (! dev->irq) {

        printk(" failed to detect IRQ line.\n");

        return EAGAIN;

    }

    /* Snarf the interrupt now.  There's no point in waiting since we cannot

       share (with ISA cards) and the board will usually be enabled. */

    {

#ifdef CONFIG_COLDFIRE

        int irqval = request_irq(NE2000_IRQ_VECTOR, ei_interrupt, 0, name,NULL);        ne2000_irqsetup();

#else

        int irqval = request_irq(dev->irq, ei_interrupt,

                        pci_irq_line ? SA_SHIRQ : 0, name, dev);

#endif

        if (irqval) {

            printk (" unable to get IRQ %d (irqval=%d).\n", dev->irq, irqval);

            return EAGAIN;

        }

    }

    dev->base_addr = ioaddr;

    /* Allocate dev->priv and fill in 8390 specific dev fields. */

    if (ethdev_init(dev)) {

        printk (" unable to get memory for dev->priv.\n");

        free_irq(dev->irq, NULL);

        return -ENOMEM;

    }

    request_region(ioaddr, NE_IO_EXTENT, name);

    for(i = 0; i < ETHER_ADDR_LEN; i++) {

        printk(" %2.2x", SA_prom[i]);

        dev->dev_addr[i] = SA_prom[i];

    }

    printk("\n%s: %s found at %#x, using IRQ %d.\n",

           dev->name, name, ioaddr, dev->irq);

    ei_status.name = name;

    ei_status.tx_start_page = start_page;

    ei_status.stop_page = stop_page;

    ei_status.word16 = (wordlength == 2);

    ei_status.rx_start_page = start_page + TX_PAGES;

#ifdef PACKETBUF_MEMSIZE

    /* Allow the packet buffer size to be overridden by know-it-alls. */

    ei_status.stop_page = ei_status.tx_start_page + PACKETBUF_MEMSIZE;

#endif

    ei_status.reset_8390 = &ne_reset_8390;

    ei_status.block_input = &ne_block_input;

    ei_status.block_output = &ne_block_output;

    ei_status.get_8390_hdr = &ne_get_8390_hdr;

    dev->open = &ne_open;

    dev->stop = &ne_close;

    NS8390_init(dev, 0);

    return 0;

}

static int

ne_open(struct device *dev)

{

    ei_open(dev);

    MOD_INC_USE_COUNT;

    return 0;

}

static int

ne_close(struct device *dev)

{

    if (ei_debug > 1)

        printk("%s: Shutting down ethercard.\n", dev->name);

    ei_close(dev);

    MOD_DEC_USE_COUNT;

    return 0;

}

/* Hard reset the card.  This used to pause for the same period that a

   8390 reset command required, but that shouldn't be necessary. */

static void

ne_reset_8390(struct device *dev)

{

    unsigned long reset_start_time = jiffies;

    if (ei_debug > 1) printk("resetting the 8390 t=%ld...", jiffies);

    /* DON'T change these to inb_p/outb_p or reset will fail on clones. */

    outb(inb(NE_BASE + NE_RESET), NE_BASE + NE_RESET);

    ei_status.txing = 0;

    ei_status.dmaing = 0;

    /* This check _should_not_ be necessary, omit eventually. */

    while ((inb_p(NE_BASE+EN0_ISR) & ENISR_RESET) == 0)

        if (jiffies - reset_start_time > 2*HZ/100) {

            printk("%s: ne_reset_8390() did not complete.\n", dev->name);

            break;

        }

    outb_p(ENISR_RESET, NE_BASE + EN0_ISR);     /* Ack intr. */

}

/* Grab the 8390 specific header. Similar to the block_input routine, but

   we don't need to be concerned with ring wrap as the header will be at

   the start of a page, so we optimize accordingly. */

static void

ne_get_8390_hdr(struct device *dev, struct e8390_pkt_hdr *hdr, int ring_page)

{

    int nic_base = dev->base_addr;

    /* This *shouldn't* happen. If it does, it's the last thing you'll see */

    if (ei_status.dmaing) {

        printk("%s: DMAing conflict in ne_get_8390_hdr "

           "[DMAstat:%d][irqlock:%d][intr:%d].\n",