URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [tags/] [nog_patch_43/] [or1ksim/] [peripheral/] [16450.c] - Blame information for rev 355

Go to most recent revision | Details | Compare with Previous | View Log


/* 16450.c -- Simulation of 8250/16450 serial UART
   Copyright (C) 1999 Damjan Lampret, lampret@opencores.org
 
This file is part of OpenRISC 1000 Architectural Simulator.
 
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
 
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.
 
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
/* This is functional simulation of 8250/16450 UARTs. Since we RX/TX data
   via file streams, we can't simulate modem control lines coming from the
   DCE and similar details of communication with the DCE.
 
   This simulated UART device is intended for basic UART device driver
   verification. From device driver perspective this device looks like a
   regular UART but never reports and modem control lines changes (the
   only DCE responses are incoming characters from the file stream).
*/
 
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
 
#include "abstract.h"
#include "16450.h"
#include "sim-config.h"
#include "pic.h"
#include "vapi.h"
 
static struct dev_16450 uarts[NR_UARTS];
static int thre_int;
 
/* Number of clock cycles (one clock cycle is one call to the uart_clock())
   before a single character is transmitted or received. */
static unsigned long char_clks(int dll, int dlh, int lcr)
{
  float bauds_per_char = 0;
  unsigned long char_clks = (dlh << 8) + dll;
 
  if (lcr & UART_LCR_PARITY)
    bauds_per_char = bauds_per_char + 1.;
 
  /* stop bits 1 or two */
  if (lcr & UART_LCR_STOP)
    bauds_per_char = bauds_per_char + 2.;
  else
    if ((lcr & 0x3) != 0)
      bauds_per_char = bauds_per_char + 1.;
    else
      bauds_per_char = bauds_per_char + 1.5;
 
  bauds_per_char = bauds_per_char + (5. + (lcr & 0x3));
 
  return char_clks * bauds_per_char;
}
 
/* Set a specific UART register with value. */
void uart_write_byte(unsigned long addr, unsigned long value)
{
  int chipsel;
 
  debug(4, "uart_write_byte(%x,%02x)\n", addr, (unsigned)value);
 
  for(chipsel = 0; chipsel < NR_UARTS; chipsel++)
    if ((addr & ~(UART_ADDR_SPACE-1)) == config.uarts[chipsel].baseaddr)
      break;
  if (chipsel >= NR_UARTS) return;
 
  if (uarts[chipsel].regs.lcr & UART_LCR_DLAB) {
    switch (addr % UART_ADDR_SPACE) {
      case UART_DLL:
        uarts[chipsel].regs.dll = value;
        uarts[chipsel].char_clks = char_clks(uarts[chipsel].regs.dll, uarts[chipsel].regs.dlh, uarts[chipsel].regs.lcr);
        return;
      case UART_DLH:
        uarts[chipsel].regs.dlh = value;
        return;
    }
  }
 
  switch (addr % UART_ADDR_SPACE) {
    case UART_TXBUF:
      if (uarts[chipsel].istat.txbuf_full < uarts[chipsel].fifo_len) {
        uarts[chipsel].istat.txbuf_full++;
        uarts[chipsel].regs.txbuf[uarts[chipsel].istat.txbuf_head] = value;
        uarts[chipsel].istat.txbuf_head = (uarts[chipsel].istat.txbuf_head + 1) % uarts[chipsel].fifo_len;
      } else
        uarts[chipsel].regs.txbuf[uarts[chipsel].istat.txbuf_head] = value;
 
      if (uarts[chipsel].istat.txbuf_full < uarts[chipsel].fifo_len)
        uarts[chipsel].regs.lsr &= ~UART_LSR_TXBUFE;
      else
        uarts[chipsel].regs.lsr |= UART_LSR_TXBUFE;
      uarts[chipsel].regs.lsr &= ~UART_LSR_TXSERE;
 
      uarts[chipsel].istat.thre_int = 0;
      break;
    case UART_IER:
      uarts[chipsel].regs.ier = value & UART_VALID_IER;
      break;
    case UART_LCR:
      uarts[chipsel].regs.lcr = value & UART_VALID_LCR;
      break;
    case UART_MCR:
      uarts[chipsel].regs.mcr = value & UART_VALID_MCR;
      break;
    case UART_SCR:
      uarts[chipsel].regs.scr = value;
      break;
    default:
      debug(1, "write out of range (addr %x)\n", addr);
  }
}
 
/* Read a specific UART register. */
unsigned long uart_read_byte(unsigned long addr)
{
  unsigned char value = 0;
  int chipsel;
 
  debug(4, "uart_read_byte(%x)", addr);
 
  for(chipsel = 0; chipsel < NR_UARTS; chipsel++)
    if ((addr & ~(UART_ADDR_SPACE-1)) == config.uarts[chipsel].baseaddr)
      break;
 
  if (chipsel >= NR_UARTS)
    return 0;
 
  if (uarts[chipsel].regs.lcr & UART_LCR_DLAB) {
    switch (addr % UART_ADDR_SPACE) {
      case UART_DLL:
        value = uarts[chipsel].regs.dll;
        debug(4, "= %x\n", value);
        return value;
      case UART_DLH:
        value = uarts[chipsel].regs.dlh;
        debug(4, "= %x\n", value);
        return value;
    }
  }
 
  switch (addr % UART_ADDR_SPACE) {
    case UART_RXBUF:
      if (uarts[chipsel].istat.rxbuf_full) {
        value = uarts[chipsel].regs.rxbuf[uarts[chipsel].istat.rxbuf_tail];
        uarts[chipsel].istat.rxbuf_tail = (uarts[chipsel].istat.rxbuf_tail + 1) % uarts[chipsel].fifo_len;
        uarts[chipsel].istat.rxbuf_full--;
      }
 
      if (uarts[chipsel].istat.rxbuf_full)
        uarts[chipsel].regs.lsr |= UART_LSR_RDRDY;
      else
        uarts[chipsel].regs.lsr &= ~UART_LSR_RDRDY;
      break;
    case UART_IER:
      value = uarts[chipsel].regs.ier & UART_VALID_IER;
      break;
    case UART_IIR:
      value = (uarts[chipsel].regs.iir & UART_VALID_IIR) | 0xc0;
      uarts[chipsel].istat.thre_int = 0;
      break;
    case UART_LCR:
      value = uarts[chipsel].regs.lcr & UART_VALID_LCR;
      break;
    case UART_MCR:
      value = 0;
      break;
    case UART_LSR:
      value = uarts[chipsel].regs.lsr & UART_VALID_LSR;
      uarts[chipsel].regs.lsr &=
        ~(UART_LSR_OVRRUN | UART_LSR_PARITY
         | UART_LSR_FRAME | UART_LSR_BREAK);
      break;
    case UART_MSR:
      value = uarts[chipsel].regs.msr & UART_VALID_MSR;
      uarts[chipsel].regs.msr = 0;
      break;
    case UART_SCR:
      value = uarts[chipsel].regs.scr;
      break;
    default:
      debug(1, "read out of range (addr %x)\n", addr);
  }
  debug(4, " = %x\n", value);
  return value;
}
 
/* Function that handles incoming VAPI data.  */
void uart_vapi_read (unsigned long id, unsigned long data)
{
  int uart;
  debug(4, "UART: id %08x, data %08x\n", id, data);
  uart = id & VAPI_DEVICE_ID;
  uarts[uart].vapi_buf[uarts[uart].vapi_buf_head_ptr] = data;
  uarts[uart].vapi_buf_head_ptr = (uarts[uart].vapi_buf_head_ptr + 1) % UART_RX_BUF;
  if (uarts[uart].vapi_buf_tail_ptr == uarts[uart].vapi_buf_head_ptr) {
    fprintf (stderr, "FATAL: uart VAPI buffer to small.\n");
    exit (1);
  }
}
 
/* Reset.  It initializes all registers of all UART devices to zero values,
   (re)opens all RX/TX file streams and places devices in memory address
   space.  */
void uart_reset()
{
  int i;
 
  if (!config.uarts_enabled)
    config.nuarts = 0;
 
  if (config.sim.verbose && config.nuarts)
    printf("Resetting %u UART(s).\n", config.nuarts);
 
  memset(uarts, 0, sizeof(uarts));
 
  for(i = 0; i < config.nuarts; i++) {
    if (config.uarts[i].vapi_id) {
      if ((config.uarts[i].vapi_id & VAPI_DEVICE_ID) != i) {
        fprintf (stderr, "ERROR: Wrong vapi_id (0x%x) for uart %i, last byte is required to be %02x; ignoring.\n", config.uarts[i].vapi_id, i, i);
        config.uarts[i].vapi_id = 0;
        uarts[i].txfs = 0;
      } else {
        vapi_install_handler (config.uarts[i].vapi_id, uart_vapi_read);
        register_memoryarea(config.uarts[i].baseaddr, UART_ADDR_SPACE, 1, uart_read_byte, uart_write_byte);
      }
    } else if (config.uarts[i].txfile) { /* MM: Try to create stream.  */
      if (!(uarts[i].rxfs = fopen(config.uarts[i].rxfile, "r"))
        && !(uarts[i].rxfs = fopen(config.uarts[i].rxfile, "r+"))) {
        fprintf(stderr, "WARNING: UART%d has problems with RX file stream.\n", i);
        continue;
      }
      uarts[i].txfs = fopen(config.uarts[i].txfile, "a");
      if (uarts[i].rxfs && uarts[i].txfs && config.sim.verbose) {
        printf("UART%d at 0x%.8x uses ", i, config.uarts[i].baseaddr);
        printf("%s for RX and %s for TX.\n", config.uarts[i].rxfile, config.uarts[i].txfile);
      } else
        fprintf(stderr, "WARNING: UART%d has problems with TX file stream.\n", i);
      register_memoryarea(config.uarts[i].baseaddr, UART_ADDR_SPACE, 1, uart_read_byte, uart_write_byte);
    }
 
    if (config.uarts[i].uart16550)
      uarts[i].fifo_len = 16;
    else
      uarts[i].fifo_len = 1;
 
    uarts[i].istat.rxbuf_head = uarts[i].istat.rxbuf_tail = 0;
    uarts[i].istat.txbuf_head = uarts[i].istat.txbuf_tail = 0;
 
    uarts[i].regs.lcr = UART_LCR_RESET;
  }
}
 
/* Simulation hook. Must be called every clock cycle to simulate all UART
   devices. It does internal functional UART simulation. */
void uart_clock()
{
  int i, retval;
 
  for(i = 0; i < config.nuarts; i++) {
    /* If VAPI is not selected, UART communicates with two file streams;
       if VAPI is selected, we use VAPI streams.  */
 
    /* if txfs is corrupted, skip this uart. */
    if (!config.uarts[i].vapi_id && !uarts[i].txfs) continue;
 
    /* Transmit */
    if (!uarts[i].istat.txser_full) {
      uarts[i].regs.lsr |= UART_LSR_TXBUFE;
      if (uarts[i].istat.txbuf_full) {
        uarts[i].iregs.txser = uarts[i].regs.txbuf[uarts[i].istat.txbuf_tail];
        uarts[i].istat.txbuf_tail = (uarts[i].istat.txbuf_tail + 1) % uarts[i].fifo_len;
        uarts[i].istat.txser_full = 1;
        uarts[i].istat.txbuf_full--;
        uarts[i].regs.lsr &= ~UART_LSR_TXSERE;
        uarts[i].istat.thre_int = 1;
      } else
        uarts[i].regs.lsr |= UART_LSR_TXSERE;
    } else if (uarts[i].char_clks >= uarts[i].istat.txser_clks++) {
      debug(4, "TX \'%c\' via UART%d...\n", uarts[i].iregs.txser, i);
      if (uarts[i].regs.mcr & UART_MCR_LOOP)
        uarts[i].iregs.loopback = uarts[i].iregs.txser;
      else {
        /* Send to either VAPI or to file */
        if (config.uarts[i].vapi_id) {
          int par, pe, fe, nbits = (uarts[i].regs.lcr & UART_LCR_WLEN8) + 5;
          int i, data;
          unsigned long packet = 0;
 
          /* Encode a packet */
          packet = uarts[i].regs.lcr & ((1 << nbits) - 1);
 
          /* Calculate parity */
          for (i = 0; i < nbits; i++)
            par ^= (packet >> i) & 1;
 
          if (uarts[i].regs.lcr & UART_LCR_PARITY) {
            if (uarts[i].regs.lcr & UART_LCR_SPAR) {
              packet |= 1 << nbits;
            } else {
              if (uarts[i].regs.lcr & UART_LCR_EPAR)
                packet |= par << nbits;
              else
                packet |= (par ^ 1) << nbits;
            }
            nbits++;
          }
          packet |= 1 << (nbits++);
          if (uarts[i].regs.lcr & UART_LCR_STOP)
            packet |= 1 << (nbits++);
 
          /* Decode a packet */
          nbits = (uarts[i].vapi.lcr & UART_LCR_WLEN8) + 5;
          data = packet & ((1 << nbits) - 1);
 
          /* Calculate parity, including parity bit */
          for (i = 0; i < nbits + 1; i++)
            par ^= (packet >> i) & 1;
 
          if (uarts[i].vapi.lcr & UART_LCR_PARITY) {
            if (uarts[i].vapi.lcr & UART_LCR_SPAR) {
              pe = !((packet >> nbits) & 1);
            } else {
              if (uarts[i].vapi.lcr & UART_LCR_EPAR)
                pe = par != 0;
              else
                pe = par != 1;
            }
            nbits++;
          } else
            pe = 0;
 
          fe |= ((packet >> (nbits++)) & 1) ^ 1;
          if (uarts[i].vapi.lcr & UART_LCR_STOP)
            fe |= ((packet >> (nbits++)) & 1) ^ 1;
 
          printf ("%08x %08x\n", config.uarts[i].vapi_id, data | (uarts[i].vapi.lcr << 8) | (pe << 16) | (fe << 17));
          vapi_send (config.uarts[i].vapi_id, data | (uarts[i].vapi.lcr << 8) | (pe << 16) | (fe << 17));
        } else {
          fputc((int)(uarts[i].iregs.txser & 0xFF), uarts[i].txfs);
          fflush(uarts[i].txfs);
        }
      }
      uarts[i].istat.txser_full = 0;
      uarts[i].istat.txser_clks = 0;
    }
 
    /* Receive */
    if (uarts[i].istat.rxser_full) {
      if (uarts[i].char_clks >= uarts[i].istat.rxser_clks++) {
        debug(4, "Receiving via UART%d...\n", i);
        uarts[i].istat.rxser_full = 0;
        uarts[i].istat.rxser_clks = 0;
 
        if (++uarts[i].istat.rxbuf_full > uarts[i].fifo_len)
          uarts[i].regs.lsr |= UART_LSR_OVRRUN;
        else {
          uarts[i].regs.rxbuf[uarts[i].istat.rxbuf_head] = uarts[i].iregs.rxser & 0xFF;
          uarts[i].istat.rxbuf_head = (uarts[i].istat.rxbuf_head + 1) % uarts[i].fifo_len;
          uarts[i].istat.rxbuf_full++;
        }
        uarts[i].regs.lsr |= UART_LSR_RDRDY;
      }
    }
 
    /* Check if there is something waiting, and put it into rxser */
    if (uarts[i].regs.mcr & UART_MCR_LOOP) {
      uarts[i].iregs.rxser = uarts[i].iregs.loopback;
      uarts[i].istat.rxser_full = 1;
    } else {
      if (!config.uarts[i].vapi_id) {
        if((retval = fgetc(uarts[i].rxfs)) != EOF)
          uarts[i].iregs.rxser = (char)retval;
          uarts[i].istat.rxser_full = 1;
      } else { /* VAPI */
        int received = 0;
        while (!received) {
          if (uarts[i].vapi_buf_head_ptr != uarts[i].vapi_buf_tail_ptr) {
            unsigned long data = uarts[i].vapi_buf[uarts[i].vapi_buf_tail_ptr];
            uarts[i].vapi_buf_tail_ptr = (uarts[i].vapi_buf_tail_ptr + 1) % uarts[i].fifo_len;
            switch (data >> 24) {
              case 0x00:
                uarts[i].vapi.lcr = (data >> 8) & 0xff;
                /* Put data into rx fifo */
                uarts[i].vapi.char_clks = char_clks (uarts[i].vapi.dll, uarts[i].vapi.dlh, uarts[i].vapi.lcr);
                if (uarts[i].vapi.lcr != uarts[i].regs.lcr || uarts[i].vapi.char_clks != uarts[i].char_clks
                 || uarts[i].vapi.skew < -MAX_SKEW || uarts[i].vapi.skew > MAX_SKEW) {
                  fprintf (stderr, "WARNING: unmatched VAPI and uart modes.\n");
                  /* Set error bits */
                  uarts[i].regs.lsr |= UART_LSR_PARITY | UART_LSR_FRAME;
                  break;
                } else {
                  uarts[i].iregs.rxser = data & 0xff;
                  uarts[i].istat.rxser_full = 1;
                }
                received = 1;
                break;
              case 0x01:
                uarts[i].vapi.dll = (data >> 0) & 0xff;
                uarts[i].vapi.dlh = (data >> 8) & 0xff;
                break;
              case 0x02:
                uarts[i].vapi.lcr = data & 0xff;
                break;
              case 0x03:
                uarts[i].vapi.skew = (signed short)(data & 0xffff);
                break;
              default:
                fprintf (stderr, "WARNING: Invalid vapi command %02x\n", data >> 24);
                break;
            }
          } else break;
        }
      }
    }
 
    /* Loopback */
    if (uarts[i].regs.mcr & UART_MCR_LOOP) {
      debug(5, "uart_clock: Loopback\n");
      if ((uarts[i].regs.mcr & UART_MCR_AUX2) !=
          ((uarts[i].regs.msr & UART_MSR_DCD) >> 4))
        uarts[i].regs.msr |= UART_MSR_DDCD;
      if ((uarts[i].regs.mcr & UART_MCR_AUX1) <
          ((uarts[i].regs.msr & UART_MSR_RI) >> 4))
        uarts[i].regs.msr |= UART_MSR_TERI;
      if ((uarts[i].regs.mcr & UART_MCR_RTS) !=
          ((uarts[i].regs.msr & UART_MSR_CTS) >> 3))
        uarts[i].regs.msr |= UART_MSR_DCTS;
      if ((uarts[i].regs.mcr & UART_MCR_DTR) !=
          ((uarts[i].regs.msr & UART_MSR_DSR) >> 5))
        uarts[i].regs.msr |= UART_MSR_DDSR;
      uarts[i].regs.msr &= ~(UART_MSR_DCD | UART_MSR_RI
                | UART_MSR_DSR | UART_MSR_CTS);
      uarts[i].regs.msr |= ((uarts[i].regs.mcr & UART_MCR_AUX2) << 4);
      uarts[i].regs.msr |= ((uarts[i].regs.mcr & UART_MCR_AUX1) << 4);
      uarts[i].regs.msr |= ((uarts[i].regs.mcr & UART_MCR_RTS) << 3);
      uarts[i].regs.msr |= ((uarts[i].regs.mcr & UART_MCR_DTR) << 5);
    }
 
    /* Interrupt detection in proper priority order. */
    uarts[i].regs.iir = UART_IIR_NO_INT;
    if (uarts[i].regs.ier & UART_IER_RLSI &&
        uarts[i].regs.lsr & (UART_LSR_OVRRUN | UART_LSR_PARITY
          | UART_LSR_FRAME | UART_LSR_BREAK)) {
      uarts[i].regs.iir = UART_IIR_RLSI;
    }
    else if (uarts[i].regs.ier & UART_IER_RDI &&
        uarts[i].regs.lsr & UART_LSR_RDRDY) {
      uarts[i].regs.iir = UART_IIR_RDI;
    }
    else if (uarts[i].regs.ier & UART_IER_THRI &&
        uarts[i].regs.lsr & UART_LSR_TXBUFE &&
        uarts[i].istat.thre_int == 1) {
      uarts[i].regs.iir = UART_IIR_THRI;
    }
    else if (uarts[i].regs.ier & UART_IER_MSI &&
        uarts[i].regs.msr & (UART_MSR_DCTS | UART_MSR_DDSR
          | UART_MSR_TERI | UART_MSR_DDCD)) {
      uarts[i].regs.iir = UART_IIR_MSI;
    }
    if (!(uarts[i].regs.iir & UART_IIR_NO_INT))
      report_interrupt(config.uarts[i].irq);
  }
}
 
/* Print register values on stdout. */
void uart_status()
{
  int i, j;
 
  for(i = 0; i < config.nuarts; i++) {
    if ( !config.uarts[i].baseaddr )
      continue;
    printf("\nUART%d visible registers at 0x%.8x:\n", i, config.uarts[i].baseaddr);
    printf("RXBUF:");
    for (j = uarts[i].istat.rxbuf_head; j != uarts[i].istat.rxbuf_tail; j = (j + 1) % uarts[i].fifo_len)
      printf (" %.2x", uarts[i].regs.rxbuf[j]);
    printf("  TXBUF: %.2x\n", uarts[i].regs.txbuf);
    printf("DLL  : %.2x  DLH  : %.2x\n", uarts[i].regs.dll, uarts[i].regs.dlh);
    printf("IER  : %.2x  IIR  : %.2x\n", uarts[i].regs.ier, uarts[i].regs.iir);
    printf("LCR  : %.2x  MCR  : %.2x\n", uarts[i].regs.lcr, uarts[i].regs.mcr);
    printf("LSR  : %.2x  MSR  : %.2x\n", uarts[i].regs.lsr, uarts[i].regs.msr);
    printf("SCR  : %.2x\n", uarts[i].regs.scr);
 
    printf("\nInternal registers (sim debug):\n");
    printf("RXSER: %.2x  TXSER: %.2x\n", uarts[i].iregs.rxser, uarts[i].iregs.txser);
 
    printf("\nInternal status (sim debug):\n");
    printf("char_clks: %d\n", uarts[i].char_clks);
    printf("rxser_clks: %d  txser_clks: %d\n", uarts[i].istat.rxser_clks, uarts[i].istat.txser_clks);
    printf("rxser: %d  txser: %d\n", uarts[i].istat.rxser_full, uarts[i].istat.txser_full);
    printf("rxbuf: %d  txbuf: %d\n", uarts[i].istat.rxbuf_full, uarts[i].istat.txbuf_full);
    printf("Using IRQ%i\n", config.uarts[i].irq);
    if (config.uarts[i].vapi_id)
      printf ("Connected to vapi ID=%x\n\n", config.uarts[i].vapi_id);
    else
      printf("RX fs: %p  TX fs: %p\n\n", uarts[i].rxfs, uarts[i].txfs);
  }
}

Line No.	Rev	Author	Line
1	31	lampret	`/* 16450.c -- Simulation of 8250/16450 serial UART`
2			`Copyright (C) 1999 Damjan Lampret, lampret@opencores.org`
3
4			`This file is part of OpenRISC 1000 Architectural Simulator.`
5
6			`This program is free software; you can redistribute it and/or modify`
7			`it under the terms of the GNU General Public License as published by`
8			`the Free Software Foundation; either version 2 of the License, or`
9			`(at your option) any later version.`
10
11			`This program is distributed in the hope that it will be useful,`
12			`but WITHOUT ANY WARRANTY; without even the implied warranty of`
13			`MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the`
14			`GNU General Public License for more details.`
15
16			`You should have received a copy of the GNU General Public License`
17			`along with this program; if not, write to the Free Software`
18			`Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */`
19
20			`/* This is functional simulation of 8250/16450 UARTs. Since we RX/TX data`
21			`via file streams, we can't simulate modem control lines coming from the`
22			`DCE and similar details of communication with the DCE.`
23
24			`This simulated UART device is intended for basic UART device driver`
25			`verification. From device driver perspective this device looks like a`
26			`regular UART but never reports and modem control lines changes (the`
27			`only DCE responses are incoming characters from the file stream).`
28			`*/`
29
30			`#include <stdlib.h>`
31			`#include <stdio.h>`
32			`#include <string.h>`
33
34	235	erez	`#include "abstract.h"`
35	31	lampret	`#include "16450.h"`
36			`#include "sim-config.h"`
37	102	lampret	`#include "pic.h"`
38	336	markom	`#include "vapi.h"`
39	31	lampret
40			`static struct dev_16450 uarts[NR_UARTS];`
41	221	markom	`static int thre_int;`
42	31	lampret
43			`/* Number of clock cycles (one clock cycle is one call to the uart_clock())`
44			`before a single character is transmitted or received. */`
45	355	markom	`static unsigned long char_clks(int dll, int dlh, int lcr)`
46	31	lampret	`{`
47	355	markom	`float bauds_per_char = 0;`
48			`unsigned long char_clks = (dlh << 8) + dll;`
49
50			`if (lcr & UART_LCR_PARITY)`
51			`bauds_per_char = bauds_per_char + 1.;`
52	31	lampret
53	355	markom	`/* stop bits 1 or two */`
54			`if (lcr & UART_LCR_STOP)`
55			`bauds_per_char = bauds_per_char + 2.;`
56			`else`
57			`if ((lcr & 0x3) != 0)`
58			`bauds_per_char = bauds_per_char + 1.;`
59			`else`
60			`bauds_per_char = bauds_per_char + 1.5;`
61
62			`bauds_per_char = bauds_per_char + (5. + (lcr & 0x3));`
63
64			`return char_clks * bauds_per_char;`
65	31	lampret	`}`
66
67			`/* Set a specific UART register with value. */`
68	238	erez	`void uart_write_byte(unsigned long addr, unsigned long value)`
69	31	lampret	`{`
70	355	markom	`int chipsel;`
71
72			`debug(4, "uart_write_byte(%x,%02x)\n", addr, (unsigned)value);`
73	341	markom
74	355	markom	`for(chipsel = 0; chipsel < NR_UARTS; chipsel++)`
75			`if ((addr & ~(UART_ADDR_SPACE-1)) == config.uarts[chipsel].baseaddr)`
76			`break;`
77			`if (chipsel >= NR_UARTS) return;`
78	31	lampret
79	355	markom	`if (uarts[chipsel].regs.lcr & UART_LCR_DLAB) {`
80			`switch (addr % UART_ADDR_SPACE) {`
81			`case UART_DLL:`
82			`uarts[chipsel].regs.dll = value;`
83			`uarts[chipsel].char_clks = char_clks(uarts[chipsel].regs.dll, uarts[chipsel].regs.dlh, uarts[chipsel].regs.lcr);`
84			`return;`
85			`case UART_DLH:`
86			`uarts[chipsel].regs.dlh = value;`
87			`return;`
88			`}`
89			`}`
90
91			`switch (addr % UART_ADDR_SPACE) {`
92			`case UART_TXBUF:`
93			`if (uarts[chipsel].istat.txbuf_full < uarts[chipsel].fifo_len) {`
94			`uarts[chipsel].istat.txbuf_full++;`
95			`uarts[chipsel].regs.txbuf[uarts[chipsel].istat.txbuf_head] = value;`
96			`uarts[chipsel].istat.txbuf_head = (uarts[chipsel].istat.txbuf_head + 1) % uarts[chipsel].fifo_len;`
97			`} else`
98			`uarts[chipsel].regs.txbuf[uarts[chipsel].istat.txbuf_head] = value;`
99	341	markom
100	355	markom	`if (uarts[chipsel].istat.txbuf_full < uarts[chipsel].fifo_len)`
101			`uarts[chipsel].regs.lsr &= ~UART_LSR_TXBUFE;`
102			`else`
103			`uarts[chipsel].regs.lsr \|= UART_LSR_TXBUFE;`
104			`uarts[chipsel].regs.lsr &= ~UART_LSR_TXSERE;`
105	341	markom
106	355	markom	`uarts[chipsel].istat.thre_int = 0;`
107			`break;`
108			`case UART_IER:`
109			`uarts[chipsel].regs.ier = value & UART_VALID_IER;`
110			`break;`
111			`case UART_LCR:`
112			`uarts[chipsel].regs.lcr = value & UART_VALID_LCR;`
113			`break;`
114			`case UART_MCR:`
115			`uarts[chipsel].regs.mcr = value & UART_VALID_MCR;`
116			`break;`
117			`case UART_SCR:`
118			`uarts[chipsel].regs.scr = value;`
119			`break;`
120			`default:`
121			`debug(1, "write out of range (addr %x)\n", addr);`
122			`}`
123	31	lampret	`}`
124
125			`/* Read a specific UART register. */`
126	238	erez	`unsigned long uart_read_byte(unsigned long addr)`
127	31	lampret	`{`
128	355	markom	`unsigned char value = 0;`
129			`int chipsel;`
130
131			`debug(4, "uart_read_byte(%x)", addr);`
132
133			`for(chipsel = 0; chipsel < NR_UARTS; chipsel++)`
134			`if ((addr & ~(UART_ADDR_SPACE-1)) == config.uarts[chipsel].baseaddr)`
135			`break;`
136	31	lampret
137	355	markom	`if (chipsel >= NR_UARTS)`
138			`return 0;`
139	344	markom
140	355	markom	`if (uarts[chipsel].regs.lcr & UART_LCR_DLAB) {`
141			`switch (addr % UART_ADDR_SPACE) {`
142			`case UART_DLL:`
143			`value = uarts[chipsel].regs.dll;`
144			`debug(4, "= %x\n", value);`
145			`return value;`
146			`case UART_DLH:`
147			`value = uarts[chipsel].regs.dlh;`
148			`debug(4, "= %x\n", value);`
149			`return value;`
150			`}`
151			`}`
152
153			`switch (addr % UART_ADDR_SPACE) {`
154			`case UART_RXBUF:`
155			`if (uarts[chipsel].istat.rxbuf_full) {`
156			`value = uarts[chipsel].regs.rxbuf[uarts[chipsel].istat.rxbuf_tail];`
157			`uarts[chipsel].istat.rxbuf_tail = (uarts[chipsel].istat.rxbuf_tail + 1) % uarts[chipsel].fifo_len;`
158			`uarts[chipsel].istat.rxbuf_full--;`
159			`}`
160
161			`if (uarts[chipsel].istat.rxbuf_full)`
162			`uarts[chipsel].regs.lsr \|= UART_LSR_RDRDY;`
163			`else`
164			`uarts[chipsel].regs.lsr &= ~UART_LSR_RDRDY;`
165			`break;`
166			`case UART_IER:`
167			`value = uarts[chipsel].regs.ier & UART_VALID_IER;`
168			`break;`
169			`case UART_IIR:`
170			`value = (uarts[chipsel].regs.iir & UART_VALID_IIR) \| 0xc0;`
171			`uarts[chipsel].istat.thre_int = 0;`
172			`break;`
173			`case UART_LCR:`
174			`value = uarts[chipsel].regs.lcr & UART_VALID_LCR;`
175			`break;`
176			`case UART_MCR:`
177			`value = 0;`
178			`break;`
179			`case UART_LSR:`
180			`value = uarts[chipsel].regs.lsr & UART_VALID_LSR;`
181			`uarts[chipsel].regs.lsr &=`
182			`~(UART_LSR_OVRRUN \| UART_LSR_PARITY`
183			`\| UART_LSR_FRAME \| UART_LSR_BREAK);`
184			`break;`
185			`case UART_MSR:`
186			`value = uarts[chipsel].regs.msr & UART_VALID_MSR;`
187			`uarts[chipsel].regs.msr = 0;`
188			`break;`
189			`case UART_SCR:`
190			`value = uarts[chipsel].regs.scr;`
191			`break;`
192			`default:`
193			`debug(1, "read out of range (addr %x)\n", addr);`
194			`}`
195			`debug(4, " = %x\n", value);`
196			`return value;`
197	31	lampret	`}`
198
199	336	markom	`/* Function that handles incoming VAPI data. */`
200			`void uart_vapi_read (unsigned long id, unsigned long data)`
201			`{`
202	341	markom	`int uart;`
203	344	markom	`debug(4, "UART: id %08x, data %08x\n", id, data);`
204	341	markom	`uart = id & VAPI_DEVICE_ID;`
205			`uarts[uart].vapi_buf[uarts[uart].vapi_buf_head_ptr] = data;`
206			`uarts[uart].vapi_buf_head_ptr = (uarts[uart].vapi_buf_head_ptr + 1) % UART_RX_BUF;`
207			`if (uarts[uart].vapi_buf_tail_ptr == uarts[uart].vapi_buf_head_ptr) {`
208			`fprintf (stderr, "FATAL: uart VAPI buffer to small.\n");`
209			`exit (1);`
210			`}`
211			`}`
212	336	markom
213	341	markom	`/* Reset. It initializes all registers of all UART devices to zero values,`
214	31	lampret	`(re)opens all RX/TX file streams and places devices in memory address`
215	341	markom	`space. */`
216	31	lampret	`void uart_reset()`
217			`{`
218	355	markom	`int i;`
219
220	261	markom	`if (!config.uarts_enabled)`
221			`config.nuarts = 0;`
222	341	markom
223			`if (config.sim.verbose && config.nuarts)`
224			`printf("Resetting %u UART(s).\n", config.nuarts);`
225
226	355	markom	`memset(uarts, 0, sizeof(uarts));`
227	261	markom
228	355	markom	`for(i = 0; i < config.nuarts; i++) {`
229	341	markom	`if (config.uarts[i].vapi_id) {`
230			`if ((config.uarts[i].vapi_id & VAPI_DEVICE_ID) != i) {`
231			`fprintf (stderr, "ERROR: Wrong vapi_id (0x%x) for uart %i, last byte is required to be %02x; ignoring.\n", config.uarts[i].vapi_id, i, i);`
232			`config.uarts[i].vapi_id = 0;`
233			`uarts[i].txfs = 0;`
234			`} else {`
235	355	markom	`vapi_install_handler (config.uarts[i].vapi_id, uart_vapi_read);`
236			`register_memoryarea(config.uarts[i].baseaddr, UART_ADDR_SPACE, 1, uart_read_byte, uart_write_byte);`
237			`}`
238			`} else if (config.uarts[i].txfile) { /* MM: Try to create stream. */`
239			`if (!(uarts[i].rxfs = fopen(config.uarts[i].rxfile, "r"))`
240			`&& !(uarts[i].rxfs = fopen(config.uarts[i].rxfile, "r+"))) {`
241			`fprintf(stderr, "WARNING: UART%d has problems with RX file stream.\n", i);`
242			`continue;`
243			`}`
244			`uarts[i].txfs = fopen(config.uarts[i].txfile, "a");`
245			`if (uarts[i].rxfs && uarts[i].txfs && config.sim.verbose) {`
246			`printf("UART%d at 0x%.8x uses ", i, config.uarts[i].baseaddr);`
247			`printf("%s for RX and %s for TX.\n", config.uarts[i].rxfile, config.uarts[i].txfile);`
248			`} else`
249			`fprintf(stderr, "WARNING: UART%d has problems with TX file stream.\n", i);`
250			`register_memoryarea(config.uarts[i].baseaddr, UART_ADDR_SPACE, 1, uart_read_byte, uart_write_byte);`
251	341	markom	`}`
252
253			`if (config.uarts[i].uart16550)`
254			`uarts[i].fifo_len = 16;`
255			`else`
256			`uarts[i].fifo_len = 1;`
257	344	markom
258	341	markom	`uarts[i].istat.rxbuf_head = uarts[i].istat.rxbuf_tail = 0;`
259			`uarts[i].istat.txbuf_head = uarts[i].istat.txbuf_tail = 0;`
260	344	markom
261			`uarts[i].regs.lcr = UART_LCR_RESET;`
262	336	markom	`}`
263	31	lampret	`}`
264	261	markom
265	31	lampret	`/* Simulation hook. Must be called every clock cycle to simulate all UART`
266			`devices. It does internal functional UART simulation. */`
267			`void uart_clock()`
268			`{`
269	355	markom	`int i, retval;`
270	341	markom
271	355	markom	`for(i = 0; i < config.nuarts; i++) {`
272	341	markom	`/* If VAPI is not selected, UART communicates with two file streams;`
273			`if VAPI is selected, we use VAPI streams. */`
274
275			`/* if txfs is corrupted, skip this uart. */`
276	355	markom	`if (!config.uarts[i].vapi_id && !uarts[i].txfs) continue;`
277	31	lampret
278	355	markom	`/* Transmit */`
279			`if (!uarts[i].istat.txser_full) {`
280			`uarts[i].regs.lsr \|= UART_LSR_TXBUFE;`
281			`if (uarts[i].istat.txbuf_full) {`
282			`uarts[i].iregs.txser = uarts[i].regs.txbuf[uarts[i].istat.txbuf_tail];`
283			`uarts[i].istat.txbuf_tail = (uarts[i].istat.txbuf_tail + 1) % uarts[i].fifo_len;`
284			`uarts[i].istat.txser_full = 1;`
285			`uarts[i].istat.txbuf_full--;`
286			`uarts[i].regs.lsr &= ~UART_LSR_TXSERE;`
287			`uarts[i].istat.thre_int = 1;`
288			`} else`
289			`uarts[i].regs.lsr \|= UART_LSR_TXSERE;`
290			`} else if (uarts[i].char_clks >= uarts[i].istat.txser_clks++) {`
291			`debug(4, "TX \'%c\' via UART%d...\n", uarts[i].iregs.txser, i);`
292			`if (uarts[i].regs.mcr & UART_MCR_LOOP)`
293			`uarts[i].iregs.loopback = uarts[i].iregs.txser;`
294			`else {`
295			`/* Send to either VAPI or to file */`
296			`if (config.uarts[i].vapi_id) {`
297			`int par, pe, fe, nbits = (uarts[i].regs.lcr & UART_LCR_WLEN8) + 5;`
298			`int i, data;`
299			`unsigned long packet = 0;`
300
301			`/* Encode a packet */`
302			`packet = uarts[i].regs.lcr & ((1 << nbits) - 1);`
303	31	lampret
304	355	markom	`/* Calculate parity */`
305			`for (i = 0; i < nbits; i++)`
306			`par ^= (packet >> i) & 1;`
307
308			`if (uarts[i].regs.lcr & UART_LCR_PARITY) {`
309			`if (uarts[i].regs.lcr & UART_LCR_SPAR) {`
310			`packet \|= 1 << nbits;`
311			`} else {`
312			`if (uarts[i].regs.lcr & UART_LCR_EPAR)`
313			`packet \|= par << nbits;`
314			`else`
315			`packet \|= (par ^ 1) << nbits;`
316			`}`
317			`nbits++;`
318			`}`
319			`packet \|= 1 << (nbits++);`
320			`if (uarts[i].regs.lcr & UART_LCR_STOP)`
321			`packet \|= 1 << (nbits++);`
322
323			`/* Decode a packet */`
324			`nbits = (uarts[i].vapi.lcr & UART_LCR_WLEN8) + 5;`
325			`data = packet & ((1 << nbits) - 1);`
326
327			`/* Calculate parity, including parity bit */`
328			`for (i = 0; i < nbits + 1; i++)`
329			`par ^= (packet >> i) & 1;`
330
331			`if (uarts[i].vapi.lcr & UART_LCR_PARITY) {`
332			`if (uarts[i].vapi.lcr & UART_LCR_SPAR) {`
333			`pe = !((packet >> nbits) & 1);`
334			`} else {`
335			`if (uarts[i].vapi.lcr & UART_LCR_EPAR)`
336			`pe = par != 0;`
337			`else`
338			`pe = par != 1;`
339			`}`
340			`nbits++;`
341			`} else`
342			`pe = 0;`
343
344			`fe \|= ((packet >> (nbits++)) & 1) ^ 1;`
345			`if (uarts[i].vapi.lcr & UART_LCR_STOP)`
346			`fe \|= ((packet >> (nbits++)) & 1) ^ 1;`
347
348			`printf ("%08x %08x\n", config.uarts[i].vapi_id, data \| (uarts[i].vapi.lcr << 8) \| (pe << 16) \| (fe << 17));`
349			`vapi_send (config.uarts[i].vapi_id, data \| (uarts[i].vapi.lcr << 8) \| (pe << 16) \| (fe << 17));`
350			`} else {`
351			`fputc((int)(uarts[i].iregs.txser & 0xFF), uarts[i].txfs);`
352			`fflush(uarts[i].txfs);`
353			`}`
354	341	markom	`}`
355	355	markom	`uarts[i].istat.txser_full = 0;`
356			`uarts[i].istat.txser_clks = 0;`
357			`}`
358	341	markom
359	355	markom	`/* Receive */`
360			`if (uarts[i].istat.rxser_full) {`
361			`if (uarts[i].char_clks >= uarts[i].istat.rxser_clks++) {`
362			`debug(4, "Receiving via UART%d...\n", i);`
363			`uarts[i].istat.rxser_full = 0;`
364			`uarts[i].istat.rxser_clks = 0;`
365
366			`if (++uarts[i].istat.rxbuf_full > uarts[i].fifo_len)`
367			`uarts[i].regs.lsr \|= UART_LSR_OVRRUN;`
368			`else {`
369			`uarts[i].regs.rxbuf[uarts[i].istat.rxbuf_head] = uarts[i].iregs.rxser & 0xFF;`
370			`uarts[i].istat.rxbuf_head = (uarts[i].istat.rxbuf_head + 1) % uarts[i].fifo_len;`
371			`uarts[i].istat.rxbuf_full++;`
372			`}`
373			`uarts[i].regs.lsr \|= UART_LSR_RDRDY;`
374			`}`
375			`}`
376
377			`/* Check if there is something waiting, and put it into rxser */`
378			`if (uarts[i].regs.mcr & UART_MCR_LOOP) {`
379			`uarts[i].iregs.rxser = uarts[i].iregs.loopback;`
380			`uarts[i].istat.rxser_full = 1;`
381			`} else {`
382			`if (!config.uarts[i].vapi_id) {`
383			`if((retval = fgetc(uarts[i].rxfs)) != EOF)`
384			`uarts[i].iregs.rxser = (char)retval;`
385			`uarts[i].istat.rxser_full = 1;`
386			`} else { /* VAPI */`
387			`int received = 0;`
388			`while (!received) {`
389			`if (uarts[i].vapi_buf_head_ptr != uarts[i].vapi_buf_tail_ptr) {`
390			`unsigned long data = uarts[i].vapi_buf[uarts[i].vapi_buf_tail_ptr];`
391			`uarts[i].vapi_buf_tail_ptr = (uarts[i].vapi_buf_tail_ptr + 1) % uarts[i].fifo_len;`
392			`switch (data >> 24) {`
393			`case 0x00:`
394			`uarts[i].vapi.lcr = (data >> 8) & 0xff;`
395			`/* Put data into rx fifo */`
396			`uarts[i].vapi.char_clks = char_clks (uarts[i].vapi.dll, uarts[i].vapi.dlh, uarts[i].vapi.lcr);`
397			`if (uarts[i].vapi.lcr != uarts[i].regs.lcr \|\| uarts[i].vapi.char_clks != uarts[i].char_clks`
398			`\|\| uarts[i].vapi.skew < -MAX_SKEW \|\| uarts[i].vapi.skew > MAX_SKEW) {`
399			`fprintf (stderr, "WARNING: unmatched VAPI and uart modes.\n");`
400			`/* Set error bits */`
401			`uarts[i].regs.lsr \|= UART_LSR_PARITY \| UART_LSR_FRAME;`
402			`break;`
403			`} else {`
404			`uarts[i].iregs.rxser = data & 0xff;`
405			`uarts[i].istat.rxser_full = 1;`
406			`}`
407			`received = 1;`
408			`break;`
409			`case 0x01:`
410			`uarts[i].vapi.dll = (data >> 0) & 0xff;`
411			`uarts[i].vapi.dlh = (data >> 8) & 0xff;`
412			`break;`
413			`case 0x02:`
414			`uarts[i].vapi.lcr = data & 0xff;`
415			`break;`
416			`case 0x03:`
417			`uarts[i].vapi.skew = (signed short)(data & 0xffff);`
418			`break;`
419			`default:`
420			`fprintf (stderr, "WARNING: Invalid vapi command %02x\n", data >> 24);`
421			`break;`
422			`}`
423			`} else break;`
424			`}`
425			`}`
426			`}`
427	341	markom
428	355	markom	`/* Loopback */`
429			`if (uarts[i].regs.mcr & UART_MCR_LOOP) {`
430			`debug(5, "uart_clock: Loopback\n");`
431			`if ((uarts[i].regs.mcr & UART_MCR_AUX2) !=`
432			`((uarts[i].regs.msr & UART_MSR_DCD) >> 4))`
433			`uarts[i].regs.msr \|= UART_MSR_DDCD;`
434			`if ((uarts[i].regs.mcr & UART_MCR_AUX1) <`
435			`((uarts[i].regs.msr & UART_MSR_RI) >> 4))`
436			`uarts[i].regs.msr \|= UART_MSR_TERI;`
437			`if ((uarts[i].regs.mcr & UART_MCR_RTS) !=`
438			`((uarts[i].regs.msr & UART_MSR_CTS) >> 3))`
439			`uarts[i].regs.msr \|= UART_MSR_DCTS;`
440			`if ((uarts[i].regs.mcr & UART_MCR_DTR) !=`
441			`((uarts[i].regs.msr & UART_MSR_DSR) >> 5))`
442			`uarts[i].regs.msr \|= UART_MSR_DDSR;`
443			`uarts[i].regs.msr &= ~(UART_MSR_DCD \| UART_MSR_RI`
444			`\| UART_MSR_DSR \| UART_MSR_CTS);`
445			`uarts[i].regs.msr \|= ((uarts[i].regs.mcr & UART_MCR_AUX2) << 4);`
446			`uarts[i].regs.msr \|= ((uarts[i].regs.mcr & UART_MCR_AUX1) << 4);`
447			`uarts[i].regs.msr \|= ((uarts[i].regs.mcr & UART_MCR_RTS) << 3);`
448			`uarts[i].regs.msr \|= ((uarts[i].regs.mcr & UART_MCR_DTR) << 5);`
449			`}`
450
451			`/* Interrupt detection in proper priority order. */`
452			`uarts[i].regs.iir = UART_IIR_NO_INT;`
453			`if (uarts[i].regs.ier & UART_IER_RLSI &&`
454			`uarts[i].regs.lsr & (UART_LSR_OVRRUN \| UART_LSR_PARITY`
455			`\| UART_LSR_FRAME \| UART_LSR_BREAK)) {`
456			`uarts[i].regs.iir = UART_IIR_RLSI;`
457			`}`
458			`else if (uarts[i].regs.ier & UART_IER_RDI &&`
459			`uarts[i].regs.lsr & UART_LSR_RDRDY) {`
460			`uarts[i].regs.iir = UART_IIR_RDI;`
461			`}`
462			`else if (uarts[i].regs.ier & UART_IER_THRI &&`
463			`uarts[i].regs.lsr & UART_LSR_TXBUFE &&`
464			`uarts[i].istat.thre_int == 1) {`
465			`uarts[i].regs.iir = UART_IIR_THRI;`
466			`}`
467			`else if (uarts[i].regs.ier & UART_IER_MSI &&`
468			`uarts[i].regs.msr & (UART_MSR_DCTS \| UART_MSR_DDSR`
469			`\| UART_MSR_TERI \| UART_MSR_DDCD)) {`
470			`uarts[i].regs.iir = UART_IIR_MSI;`
471			`}`
472			`if (!(uarts[i].regs.iir & UART_IIR_NO_INT))`
473			`report_interrupt(config.uarts[i].irq);`
474			`}`
475	31	lampret	`}`
476
477			`/* Print register values on stdout. */`
478			`void uart_status()`
479			`{`
480	355	markom	`int i, j;`
481
482			`for(i = 0; i < config.nuarts; i++) {`
483			`if ( !config.uarts[i].baseaddr )`
484			`continue;`
485			`printf("\nUART%d visible registers at 0x%.8x:\n", i, config.uarts[i].baseaddr);`
486			`printf("RXBUF:");`
487			`for (j = uarts[i].istat.rxbuf_head; j != uarts[i].istat.rxbuf_tail; j = (j + 1) % uarts[i].fifo_len)`
488			`printf (" %.2x", uarts[i].regs.rxbuf[j]);`
489			`printf(" TXBUF: %.2x\n", uarts[i].regs.txbuf);`
490			`printf("DLL : %.2x DLH : %.2x\n", uarts[i].regs.dll, uarts[i].regs.dlh);`
491			`printf("IER : %.2x IIR : %.2x\n", uarts[i].regs.ier, uarts[i].regs.iir);`
492			`printf("LCR : %.2x MCR : %.2x\n", uarts[i].regs.lcr, uarts[i].regs.mcr);`
493			`printf("LSR : %.2x MSR : %.2x\n", uarts[i].regs.lsr, uarts[i].regs.msr);`
494			`printf("SCR : %.2x\n", uarts[i].regs.scr);`
495	31	lampret
496	355	markom	`printf("\nInternal registers (sim debug):\n");`
497			`printf("RXSER: %.2x TXSER: %.2x\n", uarts[i].iregs.rxser, uarts[i].iregs.txser);`
498	31	lampret
499	355	markom	`printf("\nInternal status (sim debug):\n");`
500			`printf("char_clks: %d\n", uarts[i].char_clks);`

Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [tags/] [nog_patch_43/] [or1ksim/] [peripheral/] [16450.c] - Blame information for rev 355