Subversion Repositories or1k

/* UART test using ACV */

#include "spr_defs.h"

#include "support.h"

/* use this macro to comment out nonworking parts */

#define COMPLETE    0

/* Whether to do test in more detail */

#define DETAILED    0

#define UART_ADDR   (0x9c000000)

#define UART_RBR    (UART_ADDR + 0)

#define UART_THR    (UART_ADDR + 0)

#define UART_IER    (UART_ADDR + 1)

#define UART_IIR    (UART_ADDR + 2)

#define UART_FCR    (UART_ADDR + 2)

#define UART_LCR    (UART_ADDR + 3)

#define UART_MCR    (UART_ADDR + 4)

#define UART_LSR    (UART_ADDR + 5)

#define UART_MSR    (UART_ADDR + 6)

#define UART_SCR    (UART_ADDR + 7)

#define UART_DLL    (UART_ADDR + 0)

#define UART_DLH    (UART_ADDR + 1)

#define LCR_DIVL    (0x80)

#define LCR_BREAK   (0x40)

#define LCR_STICK   (0x20)

#define LCR_EVENP   (0x10)

#define LCR_PAREN   (0x08)

#define LCR_NSTOP   (0x04)

#define LCR_NBITS   (0x03)

#define LSR_DR      (0x01)

#define LSR_OE      (0x02)

#define LSR_PE      (0x04)

#define LSR_FE      (0x08)

#define LSR_BREAK   (0x10)

#define LSR_TXFE    (0x20)

#define LSR_TXE     (0x40)

#define LSR_ERR     (0x80)

#define UART_INT_LINE 19 /* To which interrupt is uart connected */

/* fails if x is false */

#define ASSERT(x) ((x)?1: fail (__FUNCTION__, __LINE__))

/* Waits a few cycles that uart can prepare its data */

#define WAIT() {asm ("l.nop");asm ("l.nop");asm ("l.nop");asm ("l.nop");}

/* fails if there is an error */

#define NO_ERROR() { unsigned x = getreg (UART_LSR); if ((x & (LSR_BREAK|LSR_FE|LSR_PE|LSR_OE)) && !(x & LSR_ERR)) \

printf ("LSR7 (0x%02x) ERR @ %i\n", x, __LINE__); ASSERT(!(x & LSR_ERR) && ((x & 0x60) != 0x40));}

#define MARK() printf ("Passed line %i\n", __LINE__)

#ifndef __LINE__

#define __LINE__  0

#endif

void fail (char *func, int line)

{

#ifndef __FUNCTION__

#define __FUNCTION__ "?"

#endif

  printf ("Test failed in %s:%i\n", func, line);

  report(0xeeeeeeee);

  exit (1);

}

inline void setreg (unsigned long addr, unsigned char value)

{

  *((volatile unsigned char *)addr) = value;

}

inline unsigned long getreg (unsigned long addr)

{

  return *((volatile unsigned char *)addr);

}

static volatile int int_cnt;

static volatile unsigned int_iir;

static volatile unsigned int_lsr;

static int int_rbr;

void interrupt_handler ()

{

  unsigned x;

  printf ("Int\n");

  report(0xdeaddead);

  report(int_iir = getreg (UART_IIR));

  report(int_lsr = getreg (UART_LSR));

  int_cnt++;

  ASSERT (int_iir != 1);

  switch (int_iir & 0xf) {

    case 0x6: printf ("Receiver LS int.\n"); break;

    case 0x4: printf ("Received Data available. Expecting %02x, received %02x\n",

                        int_rbr, x = getreg(UART_RBR));

              ASSERT (x == int_rbr);

              report (x);

              report (int_rbr);

              break;

    case 0xc: printf ("Character timeout. Expecting %02x, received %02x\n",

                        int_rbr, x = getreg(UART_RBR));

              ASSERT (x == int_rbr);

              report (x);

              report (int_rbr);

              break;

    case 0x2: printf ("THR empty.\n"); break;

    case 0x0: printf ("Modem Status.\n"); break;

    default:

      printf ("Invalid iir @ %i\n", __LINE__);

      exit (1);

  }

  mtspr(SPR_PICSR, 0);

}

/* Receives a char and checks for errors */

void recv_char (int ch)

{

  unsigned x;

  char r;

  report (ch);

  /* Wait for rx fifo to be  */

  while (!((x = getreg (UART_LSR)) & LSR_DR));

  if ((x & (LSR_BREAK|LSR_FE|LSR_PE|LSR_OE)) && !(x & LSR_ERR)) printf ("LSR7 (0x%02x) ERR @ recv_char\n", x);

  ASSERT(!(x & LSR_ERR));

  printf ("expected %02x, read %02x\n", ch, r = getreg (UART_RBR));

  ASSERT (r == ch); /* compare character */

}

/* Sends a char and checks for errors */

void send_char_no_wait (int ch)

{

  report (ch);

  setreg (UART_THR, ch); /* send character */

}

void send_char (int ch)

{

  report (ch);

  while (!(getreg (UART_LSR) & LSR_TXFE));

  NO_ERROR();

  setreg (UART_THR, ch); /* send character */

  NO_ERROR();

}

void init_8n1 ()

{

  setreg (UART_IER, 0x00); /* disable interrupts */

  WAIT();

  ASSERT(getreg (UART_IIR) == 0xc1); /* nothing should be happening */

  setreg (UART_FCR, 0x07);      /* clear RX and TX FIFOs */

  setreg (UART_LCR, LCR_DIVL);

  setreg (UART_DLH, 2 >> 8);

  setreg (UART_DLL, 2 & 0xff);

  setreg (UART_LCR, 0x03);    /* 8N1 @ 2 */

  ASSERT(getreg (UART_LCR) == 0x03);

  ASSERT (!(getreg (UART_LSR) & 0x1f));

}

/* Test reset values and r/w properties of some registers */

void register_test ()

{

  printf ("register test\n");

  MARK();

  { /* test reset values */

    ASSERT(getreg (UART_RBR) == 0x00); //0

    ASSERT(getreg (UART_IER) == 0x00); //1

    ASSERT(getreg (UART_IIR) == 0xc1); //2

    ASSERT(getreg (UART_LCR) == 0x03); //3

    ASSERT(getreg (UART_MCR) == 0x00); //4

    ASSERT(getreg (UART_LSR) == 0x60); //5

    ASSERT(getreg (UART_MSR) == 0x00); //6

    ASSERT(getreg (UART_SCR) == 0x00); //7

    setreg(UART_LCR, LCR_DIVL); //enable latches

    ASSERT(getreg (UART_DLL) == 0x00); //0

    ASSERT(getreg (UART_DLH) == 0x00); //1

    setreg(UART_LCR, 0x00); //disable latches

  }

    setreg(UART_LCR, 0x00); //disable latches igor

    setreg(UART_LCR, 0x00); //disable latches

    setreg(UART_LCR, 0x00); //disable latches

    setreg(UART_LCR, 0x00); //disable latches

    setreg(UART_LCR, 0x00); //disable latches

  MARK();

  { /* test if status registers are read only */

    unsigned long tmp;

    int i;

    tmp = getreg (UART_LSR);

    setreg (UART_LSR, ~tmp);

    ASSERT(getreg (UART_LSR) == tmp);

    for (i = 0; i < 9; i++) {

      setreg (UART_LSR, 1 << i);

      ASSERT(getreg (UART_LSR) == tmp);

    }

    tmp = getreg (UART_MSR);

    setreg (UART_MSR, ~tmp);

    ASSERT(getreg (UART_MSR) == tmp);

    for (i = 0; i < 9; i++) {

      setreg (UART_MSR, 1 << i);

      ASSERT(getreg (UART_MSR) == tmp);

    }

  }

  MARK();

  { /* test whether MCR is write only, be careful not to set the loopback bit */

    ASSERT(getreg (UART_MCR) == 0x00);

    setreg (UART_MCR, 0x45);

    ASSERT(getreg (UART_MCR) == 0x00);

    setreg (UART_MCR, 0xaa);

    ASSERT(getreg (UART_MCR) == 0x00);

  }

  ASSERT (!(getreg (UART_LSR) & 0x1f));

  MARK();

  { /* Test if Divisor latch byte holds the data */

    int i;

    setreg(UART_LCR, LCR_DIVL); //enable latches

    ASSERT(getreg (UART_LCR) == LCR_DIVL);

    for (i = 0; i < 16; i++) {

      unsigned short tmp = 0xdead << i;

      setreg (UART_DLH, tmp >> 8);

      setreg (UART_DLL, tmp & 0xff);

      ASSERT(getreg (UART_DLL) == (tmp & 0xff)); //0

      ASSERT(getreg (UART_DLH) == (tmp >> 8)); //1

    }

      setreg (UART_DLH, 0xa1); //igor

      setreg (UART_DLH, 0xa1); //igor

      setreg (UART_DLH, 0xa1); //igor

      setreg (UART_DLH, 0xa1); //igor

      setreg (UART_DLH, 0xa1); //igor

    ASSERT (!(getreg (UART_LSR) & 0x1f));

    for (i = 0; i < 16; i++) {

      unsigned short tmp = 0xdead << i;

      setreg (UART_DLL, tmp >> 8);

      setreg (UART_DLH, tmp & 0xff);

      ASSERT(getreg (UART_DLL) == (tmp >> 8)); //1

      ASSERT(getreg (UART_DLH) == (tmp & 0xff)); //0

    }

      setreg (UART_DLH, 0xa2); //igor

      setreg (UART_DLH, 0xa2); //igor

      setreg (UART_DLH, 0xa2); //igor

      setreg (UART_DLH, 0xa2); //igor

      setreg (UART_DLH, 0xa2); //igor

    setreg(UART_LCR, 0x00); //disable latches

    ASSERT(getreg (UART_LCR) == 0x00);

    ASSERT (!(getreg (UART_LSR) & 0x1f));

  }

  MARK();

  { /* Test LCR, if it holds our data */

    int i;

    for (i = 0; i < 6; i++) {

      unsigned short tmp = (0xde << i) & 0x3f;

      setreg (UART_LCR, tmp);

      ASSERT(getreg (UART_LCR) == tmp);

    }

    ASSERT (!(getreg (UART_LSR) & 0x1f));

  }

      setreg (UART_LCR, 0xa3); //igor

      setreg (UART_LCR, 0xa3); //igor

      setreg (UART_LCR, 0xa3); //igor

      setreg (UART_LCR, 0xa3); //igor

      setreg (UART_LCR, 0xa3); //igor

  MARK ();

  { /* SCR Test :))) */

    int i;

    setreg (UART_SCR, 0);

    ASSERT (getreg (UART_SCR) == 0);

    setreg (UART_SCR, 0xff);

    ASSERT (getreg (UART_SCR) == 0xff);

    for (i = 0; i < 16; i++) {

      unsigned char tmp = 0xdead << i;

      setreg (UART_SCR, tmp);

      ASSERT (getreg (UART_SCR) == tmp);

    }

  }

      setreg (UART_SCR, 0xa5);//igor

      setreg (UART_SCR, 0xa5);//igor

      setreg (UART_SCR, 0xa5);//igor

      setreg (UART_SCR, 0xa5);//igor

      setreg (UART_SCR, 0xa5);//igor

  MARK();

  /* Other registers will be tested later, if they function correctly,

     since we cannot test them now, without destroying anything.  */

}

/* Initializes uart and sends a few bytes to VAPI. It is then activated and send something back. */

void send_recv_test ()

{

  char *s;

  printf ("send_recv_test\n");

  /* Init */

  MARK();

  //printf ("basic\n");

  ASSERT (!(getreg (UART_LSR) & LSR_DR));

  MARK();

  /* Send a string */

  s = "send_";

  while (*s) {

    /* Wait for tx fifo to be empty */

    send_char (*s);

    report((unsigned long)*s);

    s++;

  }

  ASSERT (!(getreg (UART_LSR) & LSR_DR));

  s = "test_";

  while (*s) {

    /* Wait for tx fifo and tx to be empty */

    while (!(getreg (UART_LSR) & LSR_TXE));

    NO_ERROR();

    setreg (UART_THR, *s); /* send character */

    NO_ERROR();

    s++;

  }

  ASSERT (!(getreg (UART_LSR) & LSR_DR));

  MARK();

  /* Send characters with delay inbetween */

  s = "is_running";

  while (*s) {

    int i;

    send_char (*s);

// igor   for (i = 0; i < 1600; i++) /* wait at least ten chars before sending next one */

    for (i = 0; i < 16; i++) /* wait at few chars before sending next one */

      asm volatile ("l.nop");

    s++;

  }

  send_char (0); /* send terminate char */

  MARK();

  /* Receives and compares the string */

  s = "recv";

  while (*s) recv_char (*s++);

  MARK();

  printf ("OK\n");

}

/* sends break in both directions */

void break_test ()

{

  unsigned x;

  char *s;

  printf ("break_test\n");

  MARK();

  /* Send a break */

  NO_ERROR();

  MARK();

  setreg (UART_LCR, 0x03 | LCR_BREAK); /* 8N1 */

  MARK();

  send_char ('b'); /* make sure it is recognised as a break */

  MARK();

  recv_char ('*');

  setreg (UART_LCR, 0x03); /* deleting break bit, 8N1 */

  MARK();

  /* Receive a break */

  send_char ('!');

  MARK();

  while (!((x = getreg (UART_LSR)) & LSR_DR));

  /* we should receive zero character with broken frame and break bit should be set */

  printf("[%x]\n", (LSR_DR | LSR_BREAK | LSR_ERR | LSR_TXFE | LSR_TXE));

  ASSERT (x == (LSR_DR | LSR_BREAK | LSR_ERR | LSR_TXFE | LSR_TXE));

  ASSERT (getreg (UART_RBR) == 0);

  MARK();

  /* Send a # to release break */

  setreg (UART_THR, '#');

  while (!(getreg (UART_LSR) & LSR_DR));

  NO_ERROR(); /* BREAK bit should be cleared now  */

  ASSERT (getreg (UART_RBR) == '$');

  MARK();

  /* Break while sending characters */

  s = "ns";

  while (*s) send_char (*s++);

  ASSERT (!(getreg (UART_LSR) & LSR_DR));

  while (!(getreg (UART_LSR) & LSR_TXE)); /* Wait till we send everything */

  /* this should break the * char, so it should not be received */

  setreg (UART_THR, '*');

  setreg (UART_LCR, 0x3 | LCR_BREAK);

  MARK();

  /* Drop the break, when we get acknowledge */

  recv_char ('?');

  setreg (UART_LCR, 0x3);

  NO_ERROR();

  MARK();

  /* Receive a break */

  send_char ('#');

  while (!((x = getreg (UART_LSR)) & LSR_DR));

  /* we should receive zero character with broken frame and break bit

     should not be set, because we cleared it */

  printf("[%x:%x]\n", x, (LSR_DR | LSR_BREAK |LSR_ERR | LSR_TXFE | LSR_TXE));

  ASSERT (x == (LSR_DR | LSR_BREAK |LSR_ERR | LSR_TXFE | LSR_TXE));

  ASSERT (getreg (UART_RBR) == 0);

  MARK();

  send_char ('?');

  MARK();

  while (!(getreg (UART_LSR) & LSR_DR));

  recv_char ('!');

  printf ("OK\n");

}

/* Tries to send data in different modes in both directions */

/* Utility function, that tests current configuration */

void test_mode (int nbits)

{

  unsigned mask = (1 << nbits) - 1;

  send_char (0x55);

#if DETAILED

  send_char (0x55);

  recv_char (0x55 & mask);

#endif

  recv_char (0x55 & mask);

  send_char ('a');                  // 0x61

#if DETAILED

  send_char ('a');                  // 0x61

  recv_char ('a' & mask);

#endif

  recv_char ('a' & mask);

}

void different_modes_test ()

{

  int speed, parity, length;

  printf ("different modes test\n");

  init_8n1();

  /* Init */

  MARK();

  ASSERT(getreg (UART_IIR) == 0xc1); /* nothing should be happening */

  MARK();

  /* Test different speeds */

  for (speed = 1; speed < 5; speed++) {

    setreg (UART_LCR, LCR_DIVL);

    setreg (UART_DLH, speed >> 8);

    setreg (UART_DLL, speed & 0xff);

    setreg (UART_LCR, 0x03);    /* 8N1 @ 10 => 160 instructions for one cycle */

    test_mode (8);

    MARK();

  }

  MARK();

  setreg (UART_LCR, LCR_DIVL);

  setreg (UART_DLH, 1 >> 8);

  setreg (UART_DLL, 1 & 0xff);

  MARK();

  /* Test all parity modes with different char lengths */

  for (parity = 0; parity < 8; parity++)

    for (length = 0; length < 4; length++) {

      setreg (UART_LCR, length | (0 << 2) | (parity << 3));

      test_mode (5 + length);

      MARK();

    }

  MARK();

  /* Test configuration, if we have >1 stop bits */

  for (length = 0; length < 4; length++) {

    setreg (UART_LCR, length | (1 << 2) | (0 << 3));

    test_mode (5 + length);

    MARK();

  }

  MARK();

  /* Restore normal mode */

  send_char ('T');

  while (getreg (UART_LSR) != 0x60); /* Wait for THR to be empty */

  setreg (UART_LCR, LCR_DIVL);

  setreg (UART_DLH, 2 >> 8);

  setreg (UART_DLL, 2 & 0xff);

  setreg (UART_LCR, 0x03);    /* 8N1 @ 2 */

  MARK();

  while (!(getreg (UART_LSR) & 1));  /* Receive 'x' char */

  getreg (UART_RBR);

  MARK();

  send_char ('T');

  while (getreg (UART_LSR) != 0x60); /* Wait for THR to be empty */

  MARK();

  printf ("OK\n");

}

/* Test various FIFO levels, break and framing error interrupt, etc */

void interrupt_test ()

{

  int i;

  printf ("interrupt_test\n");

  /* Configure UART for interrupt mode */

  ASSERT(getreg (UART_IIR) == 0xc1); /* nothing should be happening */

  setreg (UART_LCR, LCR_DIVL);

  setreg (UART_DLH, 12 >> 8);            /* Set relatively slow speed, so we can hanlde interrupts properly */

  setreg (UART_DLL, 12 & 0xff);

  setreg (UART_LCR, 0x03);    /* 8N1 @ 6 */

  ASSERT (int_cnt == 0);   /* We should not have got any interrupts before this test */

  setreg (UART_FCR, 0x01); /* Set trigger level = 1 char, fifo should not be reset */

  setreg (UART_IER, 0x07); /* Enable interrupts: line status, THR empty, data ready */

  while (!int_cnt); /* Clear previous THR interrupt */

  ASSERT (--int_cnt == 0);

  ASSERT (int_iir == 0xc2);

  ASSERT ((int_lsr & 0xbe) == 0x20);

  MARK();

  /* I am configured - start interrupt test */

  send_char ('I');

  while (!int_cnt); /* Wait for THR to be empty */

  ASSERT (--int_cnt == 0);

  ASSERT (int_iir == 0xc2);

  ASSERT ((int_lsr & 0xbe) == 0x20);

  MARK();

  int_rbr = '0';

  while (!int_cnt); /* Wait for DR */

  ASSERT (--int_cnt == 0);

  ASSERT (int_iir == 0xc4);

  ASSERT (int_lsr == 0x61);

  ASSERT (int_cnt == 0); /* no interrupts should be pending */

  MARK();

  setreg (UART_FCR, 0x41); /* Set trigger level = 4 chars, fifo should not be reset */

  /* Everything ok here, send me 4 more */

  send_char ('I');

  while (!int_cnt); /* Wait for THR to be empty */

  ASSERT (--int_cnt == 0);

  ASSERT (int_iir == 0xc2);

  ASSERT ((int_lsr & 0xbe) == 0x20);

  MARK();

  int_rbr = '1';

  while (!int_cnt); /* Wait for DR */

  ASSERT (--int_cnt == 0);

  ASSERT (int_iir == 0xc4);

  ASSERT (int_lsr == 0x61);

  MARK();

  setreg (UART_FCR, 0x81); /* Set trigger level = 8 chars, fifo should not be reset */

  /* Everything ok here, send me 5 more */

  send_char ('I');

  while (!int_cnt); /* Wait for THR to be empty */

  ASSERT (--int_cnt == 0);

  ASSERT (int_iir == 0xc2);

  ASSERT ((int_lsr & 0xbe) == 0x20);

  MARK();

  int_rbr = '2';

  while (!int_cnt); /* Wait for DR */

  ASSERT (--int_cnt == 0);

  ASSERT (int_iir == 0xc4);

  ASSERT (int_lsr == 0x61);

  MARK();

  setreg (UART_FCR, 0xc1); /* Set trigger level = 14 chars, fifo should not be reset */

  /* Everything ok here, send me 7 more */

  send_char ('I');

  while (!int_cnt); /* Wait for THR to be empty */

  ASSERT (--int_cnt == 0);

  ASSERT (int_iir == 0xc2);

  ASSERT ((int_lsr & 0xbe) == 0x20);

  MARK();