Subversion Repositories or1k

# Makefile.in generated by automake 1.9.5 from Makefile.am.

# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,

# 2003, 2004, 2005  Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation

# gives unlimited permission to copy and/or distribute it,

# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY, to the extent permitted by law; without

# even the implied warranty of MERCHANTABILITY or FITNESS FOR A

# PARTICULAR PURPOSE.

@SET_MAKE@

# Makefile -- Makefile for peripherals simulation

# Copyright (C) 1999 Damjan Lampret, lampret@opencores.org

#

# This file is part of OpenRISC 1000 Architectural Simulator.

#

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 2 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program; if not, write to the Free Software

# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.

#

SOURCES = $(libperipheral_a_SOURCES)

srcdir = @srcdir@

top_srcdir = @top_srcdir@

VPATH = @srcdir@

pkgdatadir = $(datadir)/@PACKAGE@

pkglibdir = $(libdir)/@PACKAGE@

pkgincludedir = $(includedir)/@PACKAGE@

top_builddir = ..

am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd

INSTALL = @INSTALL@

install_sh_DATA = $(install_sh) -c -m 644

install_sh_PROGRAM = $(install_sh) -c

install_sh_SCRIPT = $(install_sh) -c

INSTALL_HEADER = $(INSTALL_DATA)

transform = $(program_transform_name)

NORMAL_INSTALL = :

PRE_INSTALL = :

POST_INSTALL = :

NORMAL_UNINSTALL = :

PRE_UNINSTALL = :

POST_UNINSTALL = :

build_triplet = @build@

host_triplet = @host@

target_triplet = @target@

subdir = peripheral

DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in

ACLOCAL_M4 = $(top_srcdir)/aclocal.m4

am__aclocal_m4_deps = $(top_srcdir)/configure.in

am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \

        $(ACLOCAL_M4)

mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs

CONFIG_HEADER = $(top_builddir)/config.h

CONFIG_CLEAN_FILES =

LIBRARIES = $(noinst_LIBRARIES)

libperipheral_a_AR = $(AR) $(ARFLAGS)

libperipheral_a_LIBADD =

am_libperipheral_a_OBJECTS = 16450.$(OBJEXT) dma.$(OBJEXT) \

        mc.$(OBJEXT) eth.$(OBJEXT) crc32.$(OBJEXT) gpio.$(OBJEXT) \

        vga.$(OBJEXT) fb.$(OBJEXT) ps2kbd.$(OBJEXT) atahost.$(OBJEXT) \

        atadevice.$(OBJEXT) atadevice_cmdi.$(OBJEXT) memory.$(OBJEXT)

libperipheral_a_OBJECTS = $(am_libperipheral_a_OBJECTS)

DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)

depcomp = $(SHELL) $(top_srcdir)/depcomp

am__depfiles_maybe = depfiles

COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \

        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)

CCLD = $(CC)

LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@

SOURCES = $(libperipheral_a_SOURCES)

DIST_SOURCES = $(libperipheral_a_SOURCES)

RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \

        html-recursive info-recursive install-data-recursive \

        install-exec-recursive install-info-recursive \

        install-recursive installcheck-recursive installdirs-recursive \

        pdf-recursive ps-recursive uninstall-info-recursive \

        uninstall-recursive

ETAGS = etags

CTAGS = ctags

DIST_SUBDIRS = $(SUBDIRS)

DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)

ACLOCAL = @ACLOCAL@

AMDEP_FALSE = @AMDEP_FALSE@

AMDEP_TRUE = @AMDEP_TRUE@

AMTAR = @AMTAR@

AR = @AR@

ARFLAGS = @ARFLAGS@

AUTOCONF = @AUTOCONF@

AUTOHEADER = @AUTOHEADER@

AUTOMAKE = @AUTOMAKE@

AWK = @AWK@

BUILD_DIR = @BUILD_DIR@

CC = @CC@

CCDEPMODE = @CCDEPMODE@

CFLAGS = @CFLAGS@

CPP = @CPP@

CPPFLAGS = @CPPFLAGS@

CPU_ARCH = @CPU_ARCH@

CYGPATH_W = @CYGPATH_W@

DEFS = @DEFS@

DEPDIR = @DEPDIR@

DYNAMIC_EXECUTION_FALSE = @DYNAMIC_EXECUTION_FALSE@

DYNAMIC_EXECUTION_TRUE = @DYNAMIC_EXECUTION_TRUE@

ECHO_C = @ECHO_C@

ECHO_N = @ECHO_N@

ECHO_T = @ECHO_T@

EGREP = @EGREP@

EXEEXT = @EXEEXT@

GENERATE_NEEDED_FALSE = @GENERATE_NEEDED_FALSE@

GENERATE_NEEDED_TRUE = @GENERATE_NEEDED_TRUE@

INCLUDES = @INCLUDES@

INSTALL_DATA = @INSTALL_DATA@

INSTALL_PROGRAM = @INSTALL_PROGRAM@

INSTALL_SCRIPT = @INSTALL_SCRIPT@

INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@

LDFLAGS = @LDFLAGS@

LIBOBJS = @LIBOBJS@

LIBS = @LIBS@

LOCAL_CFLAGS = @LOCAL_CFLAGS@

LOCAL_DEFS = @LOCAL_DEFS@

LOCAL_LDFLAGS = @LOCAL_LDFLAGS@

LTLIBOBJS = @LTLIBOBJS@

MAKEINFO = @MAKEINFO@

MAKE_SHELL = @MAKE_SHELL@

OBJEXT = @OBJEXT@

PACKAGE = @PACKAGE@

PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@

PACKAGE_NAME = @PACKAGE_NAME@

PACKAGE_STRING = @PACKAGE_STRING@

PACKAGE_TARNAME = @PACKAGE_TARNAME@

PACKAGE_VERSION = @PACKAGE_VERSION@

PATH_SEPARATOR = @PATH_SEPARATOR@

RANLIB = @RANLIB@

SET_MAKE = @SET_MAKE@

SHELL = @SHELL@

STRIP = @STRIP@

SUMVERSION = @SUMVERSION@

TERMCAP_LIB = @TERMCAP_LIB@

VERSION = @VERSION@

ac_ct_CC = @ac_ct_CC@

ac_ct_RANLIB = @ac_ct_RANLIB@

ac_ct_STRIP = @ac_ct_STRIP@

am__fastdepCC_FALSE = @am__fastdepCC_FALSE@

am__fastdepCC_TRUE = @am__fastdepCC_TRUE@

am__include = @am__include@

am__leading_dot = @am__leading_dot@

am__quote = @am__quote@

am__tar = @am__tar@

am__untar = @am__untar@

bindir = @bindir@

build = @build@

build_alias = @build_alias@

build_cpu = @build_cpu@

build_os = @build_os@

build_vendor = @build_vendor@

datadir = @datadir@

exec_prefix = @exec_prefix@

host = @host@

host_alias = @host_alias@

host_cpu = @host_cpu@

host_os = @host_os@

host_vendor = @host_vendor@

includedir = @includedir@

infodir = @infodir@

install_sh = @install_sh@

libdir = @libdir@

libexecdir = @libexecdir@

localstatedir = @localstatedir@

mandir = @mandir@

mkdir_p = @mkdir_p@

oldincludedir = @oldincludedir@

prefix = @prefix@

program_transform_name = @program_transform_name@

sbindir = @sbindir@

sharedstatedir = @sharedstatedir@

sysconfdir = @sysconfdir@

target = @target@

target_alias = @target_alias@

target_cpu = @target_cpu@

target_os = @target_os@

target_vendor = @target_vendor@

SUBDIRS = channels

noinst_LIBRARIES = libperipheral.a

libperipheral_a_SOURCES = \

16450.c                   \

dma.c                     \

mc.c                      \

eth.c                     \

crc32.c                   \

gpio.c                    \

vga.c                     \

fb.c                      \

ps2kbd.c                  \

atahost.c                 \

atadevice.c               \

atadevice_cmdi.c          \

memory.c

all: all-recursive

.SUFFIXES:

.SUFFIXES: .c .o .obj

$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)

        @for dep in $?; do \

          case '$(am__configure_deps)' in \

            *$$dep*) \

              cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \

                && exit 0; \

              exit 1;; \

          esac; \

        done; \

        echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  peripheral/Makefile'; \

        cd $(top_srcdir) && \

          $(AUTOMAKE) --gnu  peripheral/Makefile

.PRECIOUS: Makefile

Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status

        @case '$?' in \

          *config.status*) \

            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \

          *) \

            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \

            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \

        esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)

        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)

        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(ACLOCAL_M4):  $(am__aclocal_m4_deps)

        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

clean-noinstLIBRARIES:

        -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)

libperipheral.a: $(libperipheral_a_OBJECTS) $(libperipheral_a_DEPENDENCIES)

        -rm -f libperipheral.a

        $(libperipheral_a_AR) libperipheral.a $(libperipheral_a_OBJECTS) $(libperipheral_a_LIBADD)

        $(RANLIB) libperipheral.a

mostlyclean-compile:

        -rm -f *.$(OBJEXT)

distclean-compile:

        -rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/16450.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atadevice.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atadevice_cmdi.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atahost.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/crc32.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/dma.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/eth.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fb.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gpio.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mc.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/memory.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ps2kbd.Po@am__quote@

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vga.Po@am__quote@

.c.o:

@am__fastdepCC_TRUE@    if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \

@am__fastdepCC_TRUE@    then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi

@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@

@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

@am__fastdepCC_FALSE@   $(COMPILE) -c $<

.c.obj:

@am__fastdepCC_TRUE@    if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \

@am__fastdepCC_TRUE@    then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi

@AMDEP_TRUE@@am__fastdepCC_FALSE@       source='$<' object='$@' libtool=no @AMDEPBACKSLASH@

@AMDEP_TRUE@@am__fastdepCC_FALSE@       DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@

@am__fastdepCC_FALSE@   $(COMPILE) -c `$(CYGPATH_W) '$<'`

uninstall-info-am:

# This directory's subdirectories are mostly independent; you can cd

# into them and run `make' without going through this Makefile.

# To change the values of `make' variables: instead of editing Makefiles,

# (1) if the variable is set in `config.status', edit `config.status'

#     (which will cause the Makefiles to be regenerated when you run `make');

# (2) otherwise, pass the desired values on the `make' command line.

$(RECURSIVE_TARGETS):

        @failcom='exit 1'; \

        for f in x $$MAKEFLAGS; do \

          case $$f in \

            *=* | --[!k]*);; \

            *k*) failcom='fail=yes';; \

          esac; \

        done; \

        dot_seen=no; \

        target=`echo $@ | sed s/-recursive//`; \

        list='$(SUBDIRS)'; for subdir in $$list; do \

          echo "Making $$target in $$subdir"; \

          if test "$$subdir" = "."; then \

            dot_seen=yes; \

            local_target="$$target-am"; \

          else \

            local_target="$$target"; \

          fi; \

          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

          || eval $$failcom; \

        done; \

        if test "$$dot_seen" = "no"; then \

          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \

        fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \

maintainer-clean-recursive:

        @failcom='exit 1'; \

        for f in x $$MAKEFLAGS; do \

          case $$f in \

            *=* | --[!k]*);; \

            *k*) failcom='fail=yes';; \

          esac; \

        done; \

        dot_seen=no; \

        case "$@" in \

          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \

          *) list='$(SUBDIRS)' ;; \

        esac; \

        rev=''; for subdir in $$list; do \

          if test "$$subdir" = "."; then :; else \

            rev="$$subdir $$rev"; \

          fi; \

        done; \

        rev="$$rev ."; \

        target=`echo $@ | sed s/-recursive//`; \

        for subdir in $$rev; do \

          echo "Making $$target in $$subdir"; \

          if test "$$subdir" = "."; then \

            local_target="$$target-am"; \

          else \

            local_target="$$target"; \

          fi; \

          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \

          || eval $$failcom; \

        done && test -z "$$fail"

tags-recursive:

        list='$(SUBDIRS)'; for subdir in $$list; do \

          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \

        done

ctags-recursive:

        list='$(SUBDIRS)'; for subdir in $$list; do \

          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \

        done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)

        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '    { files[$$0] = 1; } \

               END { for (i in files) print i; }'`; \

        mkid -fID $$unique

tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \

                $(TAGS_FILES) $(LISP)

        tags=; \

        here=`pwd`; \

        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \

          include_option=--etags-include; \

          empty_fix=.; \

        else \

          include_option=--include; \

          empty_fix=; \

        fi; \

        list='$(SUBDIRS)'; for subdir in $$list; do \

          if test "$$subdir" = .; then :; else \

            test ! -f $$subdir/TAGS || \

              tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \

          fi; \

        done; \

        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '    { files[$$0] = 1; } \

               END { for (i in files) print i; }'`; \

        if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \

          test -n "$$unique" || unique=$$empty_fix; \

          $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \

            $$tags $$unique; \

        fi

ctags: CTAGS

CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \

                $(TAGS_FILES) $(LISP)

        tags=; \

        here=`pwd`; \

        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \

        unique=`for i in $$list; do \

            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \

          done | \

          $(AWK) '    { files[$$0] = 1; } \

               END { for (i in files) print i; }'`; \

        test -z "$(CTAGS_ARGS)$$tags$$unique" \

          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \

             $$tags $$unique

GTAGS:

        here=`$(am__cd) $(top_builddir) && pwd` \

          && cd $(top_srcdir) \

          && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:

        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)

        @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \

        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \

        list='$(DISTFILES)'; for file in $$list; do \

          case $$file in \

            $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \

            $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \

          esac; \

          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \

          dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \

          if test "$$dir" != "$$file" && test "$$dir" != "."; then \

            dir="/$$dir"; \

            $(mkdir_p) "$(distdir)$$dir"; \

          else \

            dir=''; \

          fi; \

          if test -d $$d/$$file; then \

            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \

              cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \

            fi; \

            cp -pR $$d/$$file $(distdir)$$dir || exit 1; \

          else \

            test -f $(distdir)/$$file \

            || cp -p $$d/$$file $(distdir)/$$file \

            || exit 1; \

          fi; \

        done

        list='$(DIST_SUBDIRS)'; for subdir in $$list; do \

          if test "$$subdir" = .; then :; else \

            test -d "$(distdir)/$$subdir" \

            || $(mkdir_p) "$(distdir)/$$subdir" \

            || exit 1; \

            distdir=`$(am__cd) $(distdir) && pwd`; \

            top_distdir=`$(am__cd) $(top_distdir) && pwd`; \

            (cd $$subdir && \

              $(MAKE) $(AM_MAKEFLAGS) \

                top_distdir="$$top_distdir" \

                distdir="$$distdir/$$subdir" \

                distdir) \

              || exit 1; \

          fi; \

        done

check-am: all-am

check: check-recursive

all-am: Makefile $(LIBRARIES)

installdirs: installdirs-recursive

installdirs-am:

install: install-recursive

install-exec: install-exec-recursive

install-data: install-data-recursive

uninstall: uninstall-recursive

install-am: all-am

        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive

install-strip:

        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \

          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \

          `test -z '$(STRIP)' || \

            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install

mostlyclean-generic:

clean-generic:

distclean-generic:

        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:

        @echo "This command is intended for maintainers to use"

        @echo "it deletes files that may require special tools to rebuild."

clean: clean-recursive

clean-am: clean-generic clean-noinstLIBRARIES mostlyclean-am

distclean: distclean-recursive

        -rm -rf ./$(DEPDIR)

        -rm -f Makefile

distclean-am: clean-am distclean-compile distclean-generic \

        distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am:

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive

        -rm -rf ./$(DEPDIR)

        -rm -f Makefile

maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-compile mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \

        clean clean-generic clean-noinstLIBRARIES clean-recursive \

        ctags ctags-recursive distclean distclean-compile \

        distclean-generic distclean-recursive distclean-tags distdir \

        dvi dvi-am html html-am info info-am install install-am \

        install-data install-data-am install-exec install-exec-am \

        install-info install-info-am install-man install-strip \

        installcheck installcheck-am installdirs installdirs-am \

        maintainer-clean maintainer-clean-generic \

        maintainer-clean-recursive mostlyclean mostlyclean-compile \

        mostlyclean-generic mostlyclean-recursive pdf pdf-am ps ps-am \

        tags tags-recursive uninstall uninstall-am uninstall-info-am

# Tell versions [3.59,3.63) of GNU make to not export all variables.

# Otherwise a system limit (for SysV at least) may be exceeded.

.NOEXPORT: