Subversion Repositories or1k

/* MIPS Simulator definition.

   Copyright (C) 1997, 1998 Free Software Foundation, Inc.

   Contributed by Cygnus Support.

This file is part of GDB, the GNU debugger.

This program is free software; you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation; either version 2, or (at your option)

any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License along

with this program; if not, write to the Free Software Foundation, Inc.,

59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

#ifndef SIM_MAIN_H

#define SIM_MAIN_H

/* This simulator doesn't cache the Current Instruction Address */

/* #define SIM_ENGINE_HALT_HOOK(SD, LAST_CPU, CIA) */

/* #define SIM_ENGINE_RESUME_HOOK(SD, LAST_CPU, CIA) */

#define SIM_HAVE_BIENDIAN

/* hobble some common features for moment */

#define WITH_WATCHPOINTS 1

#define WITH_MODULO_MEMORY 1

#define SIM_CORE_SIGNAL(SD,CPU,CIA,MAP,NR_BYTES,ADDR,TRANSFER,ERROR) \

mips_core_signal ((SD), (CPU), (CIA), (MAP), (NR_BYTES), (ADDR), (TRANSFER), (ERROR))

#include "sim-basics.h"

typedef address_word sim_cia;

#include "sim-base.h"

/* Depreciated macros and types for manipulating 64bit values.  Use

   ../common/sim-bits.h and ../common/sim-endian.h macros instead. */

typedef signed64 word64;

typedef unsigned64 uword64;

#define WORD64LO(t)     (unsigned int)((t)&0xFFFFFFFF)

#define WORD64HI(t)     (unsigned int)(((uword64)(t))>>32)

#define SET64LO(t)      (((uword64)(t))&0xFFFFFFFF)

#define SET64HI(t)      (((uword64)(t))<<32)

#define WORD64(h,l)     ((word64)((SET64HI(h)|SET64LO(l))))

#define UWORD64(h,l)     (SET64HI(h)|SET64LO(l))

/* Sign-extend the given value (e) as a value (b) bits long. We cannot

   assume the HI32bits of the operand are zero, so we must perform a

   mask to ensure we can use the simple subtraction to sign-extend. */

#define SIGNEXTEND(e,b) \

 ((unsigned_word) \

  (((e) & ((uword64) 1 << ((b) - 1))) \

   ? (((e) & (((uword64) 1 << (b)) - 1)) - ((uword64)1 << (b))) \

   : ((e) & (((((uword64) 1 << ((b) - 1)) - 1) << 1) | 1))))

/* Check if a value will fit within a halfword: */

#define NOTHALFWORDVALUE(v) ((((((uword64)(v)>>16) == 0) && !((v) & ((unsigned)1 << 15))) || (((((uword64)(v)>>32) == 0xFFFFFFFF) && ((((uword64)(v)>>16) & 0xFFFF) == 0xFFFF)) && ((v) & ((unsigned)1 << 15)))) ? (1 == 0) : (1 == 1))

/* Floating-point operations: */

#include "sim-fpu.h"

/* FPU registers must be one of the following types. All other values

   are reserved (and undefined). */

typedef enum {

 fmt_single  = 0,

 fmt_double  = 1,

 fmt_word    = 4,

 fmt_long    = 5,

 /* The following are well outside the normal acceptable format

    range, and are used in the register status vector. */

 fmt_unknown       = 0x10000000,

 fmt_uninterpreted = 0x20000000,

 fmt_uninterpreted_32 = 0x40000000,

 fmt_uninterpreted_64 = 0x80000000U,

} FP_formats;

unsigned64 value_fpr PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int fpr, FP_formats));

#define ValueFPR(FPR,FMT) value_fpr (SD, CPU, cia, (FPR), (FMT))

void store_fpr PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int fpr, FP_formats fmt, unsigned64 value));

#define StoreFPR(FPR,FMT,VALUE) store_fpr (SD, CPU, cia, (FPR), (FMT), (VALUE))

int NaN PARAMS ((unsigned64 op, FP_formats fmt));

int Infinity PARAMS ((unsigned64 op, FP_formats fmt));

int Less PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));

int Equal PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));

unsigned64 AbsoluteValue PARAMS ((unsigned64 op, FP_formats fmt));

unsigned64 Negate PARAMS ((unsigned64 op, FP_formats fmt));

unsigned64 Add PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));

unsigned64 Sub PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));

unsigned64 Multiply PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));

unsigned64 Divide PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));

unsigned64 Recip PARAMS ((unsigned64 op, FP_formats fmt));

unsigned64 SquareRoot PARAMS ((unsigned64 op, FP_formats fmt));

unsigned64 Max PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));

unsigned64 Min PARAMS ((unsigned64 op1, unsigned64 op2, FP_formats fmt));

unsigned64 convert PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int rm, unsigned64 op, FP_formats from, FP_formats to));

#define Convert(rm,op,from,to) \

convert (SD, CPU, cia, rm, op, from, to)

/* Macro to update FPSR condition-code field. This is complicated by

   the fact that there is a hole in the index range of the bits within

   the FCSR register. Also, the number of bits visible depends on the

   MIPS ISA version being supported. */

#define SETFCC(cc,v) {\

  int bit = ((cc == 0) ? 23 : (24 + (cc)));\

  FCSR = ((FCSR & ~(1 << bit)) | ((v) << bit));\

}

#define GETFCC(cc) (((((cc) == 0) ? (FCSR & (1 << 23)) : (FCSR & (1 << (24 + (cc))))) != 0) ? 1U : 0)

/* This should be the COC1 value at the start of the preceding

   instruction: */

#define PREVCOC1() ((STATE & simPCOC1) ? 1 : 0)

#ifdef TARGET_ENABLE_FR

/* FIXME: this should be enabled for all targets, but needs testing first. */

#define SizeFGR() (((WITH_TARGET_FLOATING_POINT_BITSIZE) == 64) \

   ? ((SR & status_FR) ? 64 : 32) \

   : (WITH_TARGET_FLOATING_POINT_BITSIZE))

#else

#define SizeFGR() (WITH_TARGET_FLOATING_POINT_BITSIZE)

#endif

/* Standard FCRS bits: */

#define IR (0) /* Inexact Result */

#define UF (1) /* UnderFlow */

#define OF (2) /* OverFlow */

#define DZ (3) /* Division by Zero */

#define IO (4) /* Invalid Operation */

#define UO (5) /* Unimplemented Operation */

/* Get masks for individual flags: */

#if 1 /* SAFE version */

#define FP_FLAGS(b)  (((unsigned)(b) < 5) ? (1 << ((b) + 2)) : 0)

#define FP_ENABLE(b) (((unsigned)(b) < 5) ? (1 << ((b) + 7)) : 0)

#define FP_CAUSE(b)  (((unsigned)(b) < 6) ? (1 << ((b) + 12)) : 0)

#else

#define FP_FLAGS(b)  (1 << ((b) + 2))

#define FP_ENABLE(b) (1 << ((b) + 7))

#define FP_CAUSE(b)  (1 << ((b) + 12))

#endif

#define FP_FS         (1 << 24) /* MIPS III onwards : Flush to Zero */

#define FP_MASK_RM    (0x3)

#define FP_SH_RM      (0)

#define FP_RM_NEAREST (0) /* Round to nearest        (Round) */

#define FP_RM_TOZERO  (1) /* Round to zero           (Trunc) */

#define FP_RM_TOPINF  (2) /* Round to Plus infinity  (Ceil) */

#define FP_RM_TOMINF  (3) /* Round to Minus infinity (Floor) */

#define GETRM()       (int)((FCSR >> FP_SH_RM) & FP_MASK_RM)

/* HI/LO register accesses */

/* For some MIPS targets, the HI/LO registers have certain timing

   restrictions in that, for instance, a read of a HI register must be

   separated by at least three instructions from a preceeding read.

   The struct below is used to record the last access by each of A MT,

   MF or other OP instruction to a HI/LO register.  See mips.igen for

   more details. */

typedef struct _hilo_access {

  signed64 timestamp;

  address_word cia;

} hilo_access;

typedef struct _hilo_history {

  hilo_access mt;

  hilo_access mf;

  hilo_access op;

} hilo_history;

/* Integer ALU operations: */

#include "sim-alu.h"

#define ALU32_END(ANS) \

  if (ALU32_HAD_OVERFLOW) \

    SignalExceptionIntegerOverflow (); \

  (ANS) = (signed32) ALU32_OVERFLOW_RESULT

#define ALU64_END(ANS) \

  if (ALU64_HAD_OVERFLOW) \

    SignalExceptionIntegerOverflow (); \

  (ANS) = ALU64_OVERFLOW_RESULT;

/* The following is probably not used for MIPS IV onwards: */

/* Slots for delayed register updates. For the moment we just have a

   fixed number of slots (rather than a more generic, dynamic

   system). This keeps the simulator fast. However, we only allow

   for the register update to be delayed for a single instruction

   cycle. */

#define PSLOTS (8) /* Maximum number of instruction cycles */

typedef struct _pending_write_queue {

  int in;

  int out;

  int total;

  int slot_delay[PSLOTS];

  int slot_size[PSLOTS];

  int slot_bit[PSLOTS];

  void *slot_dest[PSLOTS];

  unsigned64 slot_value[PSLOTS];

} pending_write_queue;

#ifndef PENDING_TRACE

#define PENDING_TRACE 0

#endif

#define PENDING_IN ((CPU)->pending.in)

#define PENDING_OUT ((CPU)->pending.out)

#define PENDING_TOTAL ((CPU)->pending.total)

#define PENDING_SLOT_SIZE ((CPU)->pending.slot_size)

#define PENDING_SLOT_BIT ((CPU)->pending.slot_bit)

#define PENDING_SLOT_DELAY ((CPU)->pending.slot_delay)

#define PENDING_SLOT_DEST ((CPU)->pending.slot_dest)

#define PENDING_SLOT_VALUE ((CPU)->pending.slot_value)

/* Invalidate the pending write queue, all pending writes are

   discarded. */

#define PENDING_INVALIDATE() \

memset (&(CPU)->pending, 0, sizeof ((CPU)->pending))

/* Schedule a write to DEST for N cycles time.  For 64 bit

   destinations, schedule two writes.  For floating point registers,

   the caller should schedule a write to both the dest register and

   the FPR_STATE register.  When BIT is non-negative, only BIT of DEST

   is updated. */

#define PENDING_SCHED(DEST,VAL,DELAY,BIT)                               \

  do {                                                                  \

    if (PENDING_SLOT_DEST[PENDING_IN] != NULL)                          \

      sim_engine_abort (SD, CPU, cia,                                   \

                        "PENDING_SCHED - buffer overflow\n");           \

    if (PENDING_TRACE)                                                  \

      sim_io_eprintf (SD, "PENDING_SCHED - 0x%lx - dest 0x%lx, val 0x%lx, bit %d, size %d, pending_in %d, pending_out %d, pending_total %d\n",                  \

                      (unsigned long) cia, (unsigned long) &(DEST),     \

                      (unsigned long) (VAL), (BIT), (int) sizeof (DEST),\

                      PENDING_IN, PENDING_OUT, PENDING_TOTAL);          \

    PENDING_SLOT_DELAY[PENDING_IN] = (DELAY) + 1;                       \

    PENDING_SLOT_DEST[PENDING_IN] = &(DEST);                            \

    PENDING_SLOT_VALUE[PENDING_IN] = (VAL);                             \

    PENDING_SLOT_SIZE[PENDING_IN] = sizeof (DEST);                      \

    PENDING_SLOT_BIT[PENDING_IN] = (BIT);                               \

    PENDING_IN = (PENDING_IN + 1) % PSLOTS;                             \

    PENDING_TOTAL += 1;                                                 \

  } while (0)

#define PENDING_WRITE(DEST,VAL,DELAY) PENDING_SCHED(DEST,VAL,DELAY,-1)

#define PENDING_BIT(DEST,VAL,DELAY,BIT) PENDING_SCHED(DEST,VAL,DELAY,BIT)

#define PENDING_TICK() pending_tick (SD, CPU, cia)

#define PENDING_FLUSH() abort () /* think about this one */

#define PENDING_FP() abort () /* think about this one */

/* For backward compatibility */

#define PENDING_FILL(R,VAL)                                             \

do {                                                                    \

  if ((R) >= FGRIDX && (R) < FGRIDX + NR_FGR)                           \

    {                                                                   \

      PENDING_SCHED(FGR[(R) - FGRIDX], VAL, 1, -1);                     \

      PENDING_SCHED(FPR_STATE[(R) - FGRIDX], fmt_uninterpreted, 1, -1); \

    }                                                                   \

  else                                                                  \

    PENDING_SCHED(GPR[(R)], VAL, 1, -1);                                \

} while (0)

struct _sim_cpu {

  /* The following are internal simulator state variables: */

#define CIA_GET(CPU) ((CPU)->registers[PCIDX] + 0)

#define CIA_SET(CPU,CIA) ((CPU)->registers[PCIDX] = (CIA))

  address_word dspc;  /* delay-slot PC */

#define DSPC ((CPU)->dspc)

#define DELAY_SLOT(TARGET) NIA = delayslot32 (SD_, (TARGET))

#define NULLIFY_NEXT_INSTRUCTION() NIA = nullify_next_insn32 (SD_)

  /* State of the simulator */

  unsigned int state;

  unsigned int dsstate;

#define STATE ((CPU)->state)

#define DSSTATE ((CPU)->dsstate)

/* Flags in the "state" variable: */

#define simHALTEX       (1 << 2)  /* 0 = run; 1 = halt on exception */

#define simHALTIN       (1 << 3)  /* 0 = run; 1 = halt on interrupt */

#define simTRACE        (1 << 8)  /* 0 = do nothing; 1 = trace address activity */

#define simPCOC0        (1 << 17) /* COC[1] from current */

#define simPCOC1        (1 << 18) /* COC[1] from previous */

#define simDELAYSLOT    (1 << 24) /* 0 = do nothing; 1 = delay slot entry exists */

#define simSKIPNEXT     (1 << 25) /* 0 = do nothing; 1 = skip instruction */

#define simSIGINT       (1 << 28)  /* 0 = do nothing; 1 = SIGINT has occured */

#define simJALDELAYSLOT (1 << 29) /* 1 = in jal delay slot */

#define ENGINE_ISSUE_PREFIX_HOOK() \

  { \

    /* Perform any pending writes */ \

    PENDING_TICK(); \

    /* Set previous flag, depending on current: */ \

    if (STATE & simPCOC0) \

     STATE |= simPCOC1; \

    else \

     STATE &= ~simPCOC1; \

    /* and update the current value: */ \

    if (GETFCC(0)) \

     STATE |= simPCOC0; \

    else \

     STATE &= ~simPCOC0; \

  }

/* This is nasty, since we have to rely on matching the register

   numbers used by GDB. Unfortunately, depending on the MIPS target

   GDB uses different register numbers. We cannot just include the

   relevant "gdb/tm.h" link, since GDB may not be configured before

   the sim world, and also the GDB header file requires too much other

   state. */

#ifndef TM_MIPS_H

#define LAST_EMBED_REGNUM (89)

#define NUM_REGS (LAST_EMBED_REGNUM + 1)

#endif

enum float_operation

  {

    FLOP_ADD,    FLOP_SUB,    FLOP_MUL,    FLOP_MADD,

    FLOP_MSUB,   FLOP_MAX=10, FLOP_MIN,    FLOP_ABS,

    FLOP_ITOF0=14, FLOP_FTOI0=18, FLOP_NEG=23

  };

/* To keep this default simulator simple, and fast, we use a direct

   vector of registers. The internal simulator engine then uses

   manifests to access the correct slot. */

  unsigned_word registers[LAST_EMBED_REGNUM + 1];

  int register_widths[NUM_REGS];

#define REGISTERS       ((CPU)->registers)

#define GPR     (&REGISTERS[0])

#define GPR_SET(N,VAL) (REGISTERS[(N)] = (VAL))

  /* While space is allocated for the floating point registers in the

     main registers array, they are stored separatly.  This is because

     their size may not necessarily match the size of either the

     general-purpose or system specific registers */

#define NR_FGR  (32)

#define FGRIDX  (38)

  fp_word fgr[NR_FGR];

#define FGR     ((CPU)->fgr)

#define LO      (REGISTERS[33])

#define HI      (REGISTERS[34])

#define PCIDX   37

#define PC      (REGISTERS[PCIDX])

#define CAUSE   (REGISTERS[36])

#define SRIDX   (32)

#define SR      (REGISTERS[SRIDX])      /* CPU status register */

#define FCR0IDX  (71)

#define FCR0    (REGISTERS[FCR0IDX])    /* really a 32bit register */

#define FCR31IDX (70)

#define FCR31   (REGISTERS[FCR31IDX])   /* really a 32bit register */

#define FCSR    (FCR31)

#define Debug   (REGISTERS[86])

#define DEPC    (REGISTERS[87])

#define EPC     (REGISTERS[88])

#define COCIDX  (LAST_EMBED_REGNUM + 2) /* special case : outside the normal range */

  /* All internal state modified by signal_exception() that may need to be

     rolled back for passing moment-of-exception image back to gdb. */

  unsigned_word exc_trigger_registers[LAST_EMBED_REGNUM + 1];

  unsigned_word exc_suspend_registers[LAST_EMBED_REGNUM + 1];

  int exc_suspended;

#define SIM_CPU_EXCEPTION_TRIGGER(SD,CPU,CIA) mips_cpu_exception_trigger(SD,CPU,CIA)

#define SIM_CPU_EXCEPTION_SUSPEND(SD,CPU,EXC) mips_cpu_exception_suspend(SD,CPU,EXC)

#define SIM_CPU_EXCEPTION_RESUME(SD,CPU,EXC) mips_cpu_exception_resume(SD,CPU,EXC)

  unsigned_word c0_config_reg;

#define C0_CONFIG ((CPU)->c0_config_reg)

/* The following are pseudonyms for standard registers */

#define ZERO    (REGISTERS[0])

#define V0      (REGISTERS[2])

#define A0      (REGISTERS[4])

#define A1      (REGISTERS[5])

#define A2      (REGISTERS[6])

#define A3      (REGISTERS[7])

#define T8IDX   24

#define T8      (REGISTERS[T8IDX])

#define SPIDX   29

#define SP      (REGISTERS[SPIDX])

#define RAIDX   31

#define RA      (REGISTERS[RAIDX])

  /* While space is allocated in the main registers arrray for some of

     the COP0 registers, that space isn't sufficient.  Unknown COP0

     registers overflow into the array below */

#define NR_COP0_GPR     32

  unsigned_word cop0_gpr[NR_COP0_GPR];

#define COP0_GPR        ((CPU)->cop0_gpr)

#define COP0_BADVADDR ((unsigned32)(COP0_GPR[8]))

  /* Keep the current format state for each register: */

  FP_formats fpr_state[32];

#define FPR_STATE ((CPU)->fpr_state)

  pending_write_queue pending;

  /* LLBIT = Load-Linked bit. A bit of "virtual" state used by atomic

     read-write instructions. It is set when a linked load occurs. It

     is tested and cleared by the conditional store. It is cleared

     (during other CPU operations) when a store to the location would

     no longer be atomic. In particular, it is cleared by exception

     return instructions. */

  int llbit;

#define LLBIT ((CPU)->llbit)

/* The HIHISTORY and LOHISTORY timestamps are used to ensure that

   corruptions caused by using the HI or LO register too close to a

   following operation is spotted. See mips.igen for more details. */

  hilo_history hi_history;

#define HIHISTORY (&(CPU)->hi_history)

  hilo_history lo_history;

#define LOHISTORY (&(CPU)->lo_history)

#define check_branch_bug() 

#define mark_branch_bug(TARGET) 

  sim_cpu_base base;

};

/* MIPS specific simulator watch config */

void watch_options_install PARAMS ((SIM_DESC sd));

struct swatch {

  sim_event *pc;

  sim_event *clock;

  sim_event *cycles;

};

/* FIXME: At present much of the simulator is still static */

struct sim_state {

  struct swatch watch;

  sim_cpu cpu[MAX_NR_PROCESSORS];

#if (WITH_SMP)

#define STATE_CPU(sd,n) (&(sd)->cpu[n])

#else

#define STATE_CPU(sd,n) (&(sd)->cpu[0])

#endif

  sim_state_base base;

};

/* Status information: */

/* TODO : these should be the bitmasks for these bits within the

   status register. At the moment the following are VR4300

   bit-positions: */

#define status_KSU_mask  (0x18)         /* mask for KSU bits */

#define status_KSU_shift (3)            /* shift for field */

#define ksu_kernel       (0x0)

#define ksu_supervisor   (0x1)

#define ksu_user         (0x2)

#define ksu_unknown      (0x3)

#define SR_KSU           ((SR & status_KSU_mask) >> status_KSU_shift)

#define status_IE        (1 <<  0)      /* Interrupt enable */

#define status_EIE       (1 << 16)      /* Enable Interrupt Enable */

#define status_EXL       (1 <<  1)      /* Exception level */

#define status_RE        (1 << 25)      /* Reverse Endian in user mode */

#define status_FR        (1 << 26)      /* enables MIPS III additional FP registers */

#define status_SR        (1 << 20)      /* soft reset or NMI */

#define status_BEV       (1 << 22)      /* Location of general exception vectors */

#define status_TS        (1 << 21)      /* TLB shutdown has occurred */

#define status_ERL       (1 <<  2)      /* Error level */

#define status_IM7       (1 << 15)      /* Timer Interrupt Mask */

#define status_RP        (1 << 27)      /* Reduced Power mode */

/* Specializations for TX39 family */

#define status_IEc       (1 << 0)       /* Interrupt enable (current) */

#define status_KUc       (1 << 1)       /* Kernel/User mode */

#define status_IEp       (1 << 2)       /* Interrupt enable (previous) */

#define status_KUp       (1 << 3)       /* Kernel/User mode */

#define status_IEo       (1 << 4)       /* Interrupt enable (old) */

#define status_KUo       (1 << 5)       /* Kernel/User mode */

#define status_IM_mask   (0xff)         /* Interrupt mask */

#define status_IM_shift  (8)

#define status_NMI       (1 << 20)      /* NMI */

#define status_NMI       (1 << 20)      /* NMI */

#define cause_BD ((unsigned)1 << 31)    /* L1 Exception in branch delay slot */

#define cause_BD2         (1 << 30)     /* L2 Exception in branch delay slot */

#define cause_CE_mask     0x30000000    /* Coprocessor exception */

#define cause_CE_shift    28

#define cause_EXC2_mask   0x00070000

#define cause_EXC2_shift  16

#define cause_IP7         (1 << 15)     /* Interrupt pending */

#define cause_SIOP        (1 << 12)     /* SIO pending */

#define cause_IP3         (1 << 11)     /* Int 0 pending */

#define cause_IP2         (1 << 10)     /* Int 1 pending */

#define cause_EXC_mask  (0x1c)          /* Exception code */

#define cause_EXC_shift (2)

#define cause_SW0       (1 << 8)        /* Software interrupt 0 */

#define cause_SW1       (1 << 9)        /* Software interrupt 1 */

#define cause_IP_mask   (0x3f)          /* Interrupt pending field */

#define cause_IP_shift  (10)

#define cause_set_EXC(x)  CAUSE = (CAUSE & ~cause_EXC_mask)  | ((x << cause_EXC_shift)  & cause_EXC_mask)

#define cause_set_EXC2(x) CAUSE = (CAUSE & ~cause_EXC2_mask) | ((x << cause_EXC2_shift) & cause_EXC2_mask)

/* NOTE: We keep the following status flags as bit values (1 for true,

   operations without worrying about what exactly the non-zero true

   value is. */

/* UserMode */

#ifdef SUBTARGET_R3900

#define UserMode        ((SR & status_KUc) ? 1 : 0)

#else

#define UserMode        ((((SR & status_KSU_mask) >> status_KSU_shift) == ksu_user) ? 1 : 0)

#endif /* SUBTARGET_R3900 */

/* BigEndianMem */

/* Hardware configuration. Affects endianness of LoadMemory and

   StoreMemory and the endianness of Kernel and Supervisor mode

   execution. The value is 0 for little-endian; 1 for big-endian. */

#define BigEndianMem    (CURRENT_TARGET_BYTE_ORDER == BIG_ENDIAN)

/*(state & simBE) ? 1 : 0)*/

/* ReverseEndian */

/* This mode is selected if in User mode with the RE bit being set in

   SR (Status Register). It reverses the endianness of load and store

   instructions. */

#define ReverseEndian   (((SR & status_RE) && UserMode) ? 1 : 0)

/* BigEndianCPU */

/* The endianness for load and store instructions (0=little;1=big). In

   User mode this endianness may be switched by setting the state_RE

   bit in the SR register. Thus, BigEndianCPU may be computed as

   (BigEndianMem EOR ReverseEndian). */

#define BigEndianCPU    (BigEndianMem ^ ReverseEndian) /* Already bits */

/* Exceptions: */

/* NOTE: These numbers depend on the processor architecture being

   simulated: */

enum ExceptionCause {

  Interrupt               = 0,

  TLBModification         = 1,

  TLBLoad                 = 2,

  TLBStore                = 3,

  AddressLoad             = 4,

  AddressStore            = 5,

  InstructionFetch        = 6,

  DataReference           = 7,

  SystemCall              = 8,

  BreakPoint              = 9,

  ReservedInstruction     = 10,

  CoProcessorUnusable     = 11,

  IntegerOverflow         = 12,    /* Arithmetic overflow (IDT monitor raises SIGFPE) */

  Trap                    = 13,

  FPE                     = 15,

  DebugBreakPoint         = 16,

  Watch                   = 23,

  NMIReset                = 31,

/* The following exception code is actually private to the simulator

   world. It is *NOT* a processor feature, and is used to signal

   run-time errors in the simulator. */

  SimulatorFault          = 0xFFFFFFFF

};

#define TLB_REFILL  (0)

#define TLB_INVALID (1)

/* The following break instructions are reserved for use by the

   simulator.  The first is used to halt the simulation.  The second

   is used by gdb for break-points.  NOTE: Care must be taken, since

   this value may be used in later revisions of the MIPS ISA. */

#define HALT_INSTRUCTION_MASK   (0x03FFFFC0)

#define HALT_INSTRUCTION        (0x03ff000d)

#define HALT_INSTRUCTION2       (0x0000ffcd)

#define BREAKPOINT_INSTRUCTION  (0x0005000d)

#define BREAKPOINT_INSTRUCTION2 (0x0000014d)

void interrupt_event (SIM_DESC sd, void *data);

void signal_exception (SIM_DESC sd, sim_cpu *cpu, address_word cia, int exception, ...);

#define SignalException(exc,instruction)     signal_exception (SD, CPU, cia, (exc), (instruction))

#define SignalExceptionInterrupt(level)      signal_exception (SD, CPU, cia, Interrupt, level)

#define SignalExceptionInstructionFetch()    signal_exception (SD, CPU, cia, InstructionFetch)

#define SignalExceptionAddressStore()        signal_exception (SD, CPU, cia, AddressStore)

#define SignalExceptionAddressLoad()         signal_exception (SD, CPU, cia, AddressLoad)

#define SignalExceptionDataReference()       signal_exception (SD, CPU, cia, DataReference)

#define SignalExceptionSimulatorFault(buf)   signal_exception (SD, CPU, cia, SimulatorFault, buf)

#define SignalExceptionFPE()                 signal_exception (SD, CPU, cia, FPE)

#define SignalExceptionIntegerOverflow()     signal_exception (SD, CPU, cia, IntegerOverflow)

#define SignalExceptionCoProcessorUnusable() signal_exception (SD, CPU, cia, CoProcessorUnusable)

#define SignalExceptionNMIReset()            signal_exception (SD, CPU, cia, NMIReset)

#define SignalExceptionTLBRefillStore()      signal_exception (SD, CPU, cia, TLBStore, TLB_REFILL)

#define SignalExceptionTLBRefillLoad()       signal_exception (SD, CPU, cia, TLBLoad, TLB_REFILL)

#define SignalExceptionTLBInvalidStore()     signal_exception (SD, CPU, cia, TLBStore, TLB_INVALID)

#define SignalExceptionTLBInvalidLoad()      signal_exception (SD, CPU, cia, TLBLoad, TLB_INVALID)

#define SignalExceptionTLBModification()     signal_exception (SD, CPU, cia, TLBModification)

/* Co-processor accesses */

void cop_lw  PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int coproc_num, int coproc_reg, unsigned int memword));

void cop_ld  PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int coproc_num, int coproc_reg, uword64 memword));

unsigned int cop_sw PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int coproc_num, int coproc_reg));

uword64 cop_sd PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int coproc_num, int coproc_reg));

#define COP_LW(coproc_num,coproc_reg,memword) \

cop_lw (SD, CPU, cia, coproc_num, coproc_reg, memword)

#define COP_LD(coproc_num,coproc_reg,memword) \

cop_ld (SD, CPU, cia, coproc_num, coproc_reg, memword)

#define COP_SW(coproc_num,coproc_reg) \

cop_sw (SD, CPU, cia, coproc_num, coproc_reg)

#define COP_SD(coproc_num,coproc_reg) \

cop_sd (SD, CPU, cia, coproc_num, coproc_reg)

void decode_coproc PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, unsigned int instruction));

#define DecodeCoproc(instruction) \

decode_coproc (SD, CPU, cia, (instruction))

void sim_monitor (SIM_DESC sd, sim_cpu *cpu, address_word cia, unsigned int arg);

/* Memory accesses */

/* The following are generic to all versions of the MIPS architecture

   to date: */

/* Memory Access Types (for CCA): */

#define Uncached                (0)

#define CachedNoncoherent       (1)

#define CachedCoherent          (2)

#define Cached                  (3)

#define isINSTRUCTION   (1 == 0) /* FALSE */

#define isDATA          (1 == 1) /* TRUE */

#define isLOAD          (1 == 0) /* FALSE */

#define isSTORE         (1 == 1) /* TRUE */

#define isREAL          (1 == 0) /* FALSE */

#define isRAW           (1 == 1) /* TRUE */

/* The parameter HOST (isTARGET / isHOST) is ignored */

#define isTARGET        (1 == 0) /* FALSE */

/* #define isHOST          (1 == 1) TRUE */

/* The "AccessLength" specifications for Loads and Stores. NOTE: This

   is the number of bytes minus 1. */

#define AccessLength_BYTE       (0)

#define AccessLength_HALFWORD   (1)

#define AccessLength_TRIPLEBYTE (2)

#define AccessLength_WORD       (3)

#define AccessLength_QUINTIBYTE (4)

#define AccessLength_SEXTIBYTE  (5)

#define AccessLength_SEPTIBYTE  (6)

#define AccessLength_DOUBLEWORD (7)

#define AccessLength_QUADWORD   (15)

#define LOADDRMASK (WITH_TARGET_WORD_BITSIZE == 64 \

                    ? AccessLength_DOUBLEWORD /*7*/ \

                    : AccessLength_WORD /*3*/)

#define PSIZE (WITH_TARGET_ADDRESS_BITSIZE)

INLINE_SIM_MAIN (int) address_translation PARAMS ((SIM_DESC sd, sim_cpu *, address_word cia, address_word vAddr, int IorD, int LorS, address_word *pAddr, int *CCA, int raw));

#define AddressTranslation(vAddr,IorD,LorS,pAddr,CCA,host,raw) \

address_translation (SD, CPU, cia, vAddr, IorD, LorS, pAddr, CCA, raw)

INLINE_SIM_MAIN (void) load_memory PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, uword64* memvalp, uword64* memval1p, int CCA, unsigned int AccessLength, address_word pAddr, address_word vAddr, int IorD));

#define LoadMemory(memvalp,memval1p,CCA,AccessLength,pAddr,vAddr,IorD,raw) \

load_memory (SD, CPU, cia, memvalp, memval1p, CCA, AccessLength, pAddr, vAddr, IorD)

INLINE_SIM_MAIN (void) store_memory PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int CCA, unsigned int AccessLength, uword64 MemElem, uword64 MemElem1, address_word pAddr, address_word vAddr));

#define StoreMemory(CCA,AccessLength,MemElem,MemElem1,pAddr,vAddr,raw) \

store_memory (SD, CPU, cia, CCA, AccessLength, MemElem, MemElem1, pAddr, vAddr)

INLINE_SIM_MAIN (void) cache_op PARAMS ((SIM_DESC sd, sim_cpu *cpu, address_word cia, int op, address_word pAddr, address_word vAddr, unsigned int instruction));

#define CacheOp(op,pAddr,vAddr,instruction) \