URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [ecos-2.0/] [doc/] [html/] [user-guide/] [setup-sh-edk7708.html] - Blame information for rev 1254

Go to most recent revision | Details | Compare with Previous | View Log


<!-- Copyright (C) 2003 Red Hat, Inc.                                -->
<!-- This material may be distributed only subject to the terms      -->
<!-- and conditions set forth in the Open Publication License, v1.0  -->
<!-- or later (the latest version is presently available at          -->
<!-- http://www.opencontent.org/openpub/).                           -->
<!-- Distribution of the work or derivative of the work in any       -->
<!-- standard (paper) book form is prohibited unless prior           -->
<!-- permission is obtained from the copyright holder.               -->
<HTML
><HEAD
><TITLE
>SH3/EDK7708 Hardware Setup</TITLE
><meta name="MSSmartTagsPreventParsing" content="TRUE">
<META
NAME="GENERATOR"
CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+
"><LINK
REL="HOME"
TITLE="eCos User Guide"
HREF="ecos-user-guide.html"><LINK
REL="UP"
TITLE="Target Setup"
HREF="appendix-target-setup.html"><LINK
REL="PREVIOUS"
TITLE=" Compaq iPAQ PocketPC Hardware Setup"
HREF="setup-arm-ipaq.html"><LINK
REL="NEXT"
TITLE="SH3/CQ7708 Hardware Setup"
HREF="setup-sh-cq7708.html"></HEAD
><BODY
CLASS="SECT1"
BGCOLOR="#FFFFFF"
TEXT="#000000"
LINK="#0000FF"
VLINK="#840084"
ALINK="#0000FF"
><DIV
CLASS="NAVHEADER"
><TABLE
SUMMARY="Header navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TH
COLSPAN="3"
ALIGN="center"
>eCos User Guide</TH
></TR
><TR
><TD
WIDTH="10%"
ALIGN="left"
VALIGN="bottom"
><A
HREF="setup-arm-ipaq.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="80%"
ALIGN="center"
VALIGN="bottom"
>Appendix A. Target Setup</TD
><TD
WIDTH="10%"
ALIGN="right"
VALIGN="bottom"
><A
HREF="setup-sh-cq7708.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
></TABLE
><HR
ALIGN="LEFT"
WIDTH="100%"></DIV
><DIV
CLASS="SECT1"
><H1
CLASS="SECT1"
><A
NAME="SETUP-SH-EDK7708">SH3/EDK7708 Hardware Setup</H1
><P
>The eCos Developer&#8217;s Kit package comes with a ROM
which provides GDB support for the Hitachi EDK7708 board (a big-endian
and a little-endian version). Images of these  ROMs are also provided
at <TT
CLASS="FILENAME"
>loaders/sh-edk7708/gdbload.bin</TT
> and
          <TT
CLASS="FILENAME"
>loaders/sh-edk7708le/gdbload.bin</TT
> under
the root of your eCos installation.</P
><P
>The ROM is installed to socket U6 on the board. When using
the big-endian ROM, jumper 9 must be set to 2-3. When using the
little-endian ROM, jumper 9 must be set to 1-2. Attention should
be paid to the correct orientation of the ROM during installation.
Only replace the board&quot;s existing ROM using a proper PLCC extraction
tool, as the socket would otherwise risk being damaged. </P
><P
>If you are going to program a new ROM or FLASH using the binary
image, you may have to experiment to get the right byte-order in
the device. Depending on the programming software you use, it might
be necessary to enable byte-swapping.  If the GDB stub ROM/FLASH
you program does not work, try reversing the byte-order.</P
><P
>The GDB stub in the EPROM allows communication with GDB using
the serial port at connector J1. The communication parameters are
fixed at 38400 baud, 8 data bits, no parity bit and 1 stop bit (8-N-1).
No flow control is employed. Connection to the host computer should
be made using the dedicated serial cable included in the EDK package. </P
><DIV
CLASS="SECT2"
><H2
CLASS="SECT2"
><A
NAME="AEN4067">Installing the Stubs into FLASH</H2
><DIV
CLASS="SECT3"
><H3
CLASS="SECT3"
><A
NAME="AEN4069">Preparing the Binaries</H3
><P
>These two binary preparation steps are not strictly necessary
as the eCos distribution ships with pre-compiled binaries in the
directory loaders/sh-edk7708 and loaders/sh-edk7708le
relative to the installation root.</P
><DIV
CLASS="SECT4"
><H4
CLASS="SECT4"
><A
NAME="AEN4072">Building the ROM images with the eCos Configuration Tool</H4
><P
></P
><OL
TYPE="1"
><LI
><P
>Start with a new document - selecting the
<SPAN
CLASS="emphasis"
><I
CLASS="EMPHASIS"
>File-&#62;New</I
></SPAN
>
 menu item if necessary to do this.</P
></LI
><LI
><P
>Choose the
<SPAN
CLASS="emphasis"
><I
CLASS="EMPHASIS"
>Build-&#62;Templates</I
></SPAN
>
 menu item, and then select the SH EDK7708 hardware.</P
></LI
><LI
><P
>While still displaying the
<SPAN
CLASS="emphasis"
><I
CLASS="EMPHASIS"
>Build-&#62;Templates</I
></SPAN
>
 dialog box, select the &#8220;stubs&#8221; package template
to build a GDB stub. Click
<SPAN
CLASS="emphasis"
><I
CLASS="EMPHASIS"
>OK</I
></SPAN
>.</P
></LI
><LI
><P
>If building a little-endian image, disable the &#8220;Use
big-endian mode&#8221; option in the SH EDK7708 HAL (CYGHWR_HAL_SH_BIGENDIAN).</P
></LI
><LI
><P
>Build eCos using
<SPAN
CLASS="emphasis"
><I
CLASS="EMPHASIS"
>Build-&#62;Library</I
></SPAN
>. </P
></LI
><LI
><P
>When the build completes, the image files can be found
in the bin/ subdirectory of the install tree. GDB stub
ROM images have the prefix &#8220;gdb_module&#8221;.</P
></LI
></OL
></DIV
><DIV
CLASS="SECT4"
><H4
CLASS="SECT4"
><A
NAME="AEN4092">Building the ROM images with ecosconfig</H4
><P
></P
><OL
TYPE="1"
><LI
><P
>Make an empty directory to contain the build tree,
and cd into it.</P
></LI
><LI
><P
>To build a GDB stub ROM image, enter the command:
 
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="PROGRAMLISTING"
>$ ecosconfig new edk7708 stubs</PRE
></TD
></TR
></TABLE
>
 </P
></LI
><LI
><P
>If building a little-endian image, uncomment the user
value in ecos.ecc for CYGHWR_HAL_SH_BIGENDIAN
and change it to 0.   </P
></LI
><LI
><P
>Enter the commands:
 
<TABLE
BORDER="5"
BGCOLOR="#E0E0F0"
WIDTH="70%"
><TR
><TD
><PRE
CLASS="PROGRAMLISTING"
>$ ecosconfig tree
$ make </PRE
></TD
></TR
></TABLE
></P
></LI
><LI
><P
>When the build completes, the image files can be found
in the bin/ subdirectory of the install tree. GDB stub
ROM images have the  prefix &#8220;gdb_module&#8221;.</P
></LI
></OL
></DIV
></DIV
><DIV
CLASS="SECT3"
><H3
CLASS="SECT3"
><A
NAME="AEN4107">Installing the Stubs into ROM or FLASH</H3
><P
></P
><OL
TYPE="1"
><LI
><P
>Program the binary image file gdb_module.bin
into ROM or FLASH referring to the instructions of your ROM programmer.</P
></LI
><LI
><P
>Plug the ROM/FLASH into socket U6. If the image
is little-endian set jumper 9 to 1-2. If the image is big-endian
set jumper 9 to 2-3.</P
></LI
></OL
></DIV
></DIV
></DIV
><DIV
CLASS="NAVFOOTER"
><HR
ALIGN="LEFT"
WIDTH="100%"><TABLE
SUMMARY="Footer navigation table"
WIDTH="100%"
BORDER="0"
CELLPADDING="0"
CELLSPACING="0"
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
><A
HREF="setup-arm-ipaq.html"
ACCESSKEY="P"
>Prev</A
></TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="ecos-user-guide.html"
ACCESSKEY="H"
>Home</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
><A
HREF="setup-sh-cq7708.html"
ACCESSKEY="N"
>Next</A
></TD
></TR
><TR
><TD
WIDTH="33%"
ALIGN="left"
VALIGN="top"
>Compaq iPAQ PocketPC Hardware Setup</TD
><TD
WIDTH="34%"
ALIGN="center"
VALIGN="top"
><A
HREF="appendix-target-setup.html"
ACCESSKEY="U"
>Up</A
></TD
><TD
WIDTH="33%"
ALIGN="right"
VALIGN="top"
>SH3/CQ7708 Hardware Setup</TD
></TR
></TABLE
></DIV
></BODY
></HTML
>

Line No.	Rev	Author	Line
1	1254	phoenix	`<!-- Copyright (C) 2003 Red Hat, Inc. -->`
2			`<!-- This material may be distributed only subject to the terms -->`
3			`<!-- and conditions set forth in the Open Publication License, v1.0 -->`
4			`<!-- or later (the latest version is presently available at -->`
5			`<!-- http://www.opencontent.org/openpub/). -->`
6			`<!-- Distribution of the work or derivative of the work in any -->`
7			`<!-- standard (paper) book form is prohibited unless prior -->`
8			`<!-- permission is obtained from the copyright holder. -->`
9			`<HTML`
10			`><HEAD`
11			`><TITLE`
12			`>SH3/EDK7708 Hardware Setup</TITLE`
13			`><meta name="MSSmartTagsPreventParsing" content="TRUE">`
14			`<META`
15			`NAME="GENERATOR"`
16			`CONTENT="Modular DocBook HTML Stylesheet Version 1.76b+`
17			`"><LINK`
18			`REL="HOME"`
19			`TITLE="eCos User Guide"`
20			`HREF="ecos-user-guide.html"><LINK`
21			`REL="UP"`
22			`TITLE="Target Setup"`
23			`HREF="appendix-target-setup.html"><LINK`
24			`REL="PREVIOUS"`
25			`TITLE=" Compaq iPAQ PocketPC Hardware Setup"`
26			`HREF="setup-arm-ipaq.html"><LINK`
27			`REL="NEXT"`
28			`TITLE="SH3/CQ7708 Hardware Setup"`
29			`HREF="setup-sh-cq7708.html"></HEAD`
30			`><BODY`
31			`CLASS="SECT1"`
32			`BGCOLOR="#FFFFFF"`
33			`TEXT="#000000"`
34			`LINK="#0000FF"`
35			`VLINK="#840084"`
36			`ALINK="#0000FF"`
37			`><DIV`
38			`CLASS="NAVHEADER"`
39			`><TABLE`
40			`SUMMARY="Header navigation table"`
41			`WIDTH="100%"`
42			`BORDER="0"`
43			`CELLPADDING="0"`
44			`CELLSPACING="0"`
45			`><TR`
46			`><TH`
47			`COLSPAN="3"`
48			`ALIGN="center"`
49			`>eCos User Guide</TH`
50			`></TR`
51			`><TR`
52			`><TD`
53			`WIDTH="10%"`
54			`ALIGN="left"`
55			`VALIGN="bottom"`
56			`><A`
57			`HREF="setup-arm-ipaq.html"`
58			`ACCESSKEY="P"`
59			`>Prev</A`
60			`></TD`
61			`><TD`
62			`WIDTH="80%"`
63			`ALIGN="center"`
64			`VALIGN="bottom"`
65			`>Appendix A. Target Setup</TD`
66			`><TD`
67			`WIDTH="10%"`
68			`ALIGN="right"`
69			`VALIGN="bottom"`
70			`><A`
71			`HREF="setup-sh-cq7708.html"`
72			`ACCESSKEY="N"`
73			`>Next</A`
74			`></TD`
75			`></TR`
76			`></TABLE`
77			`><HR`
78			`ALIGN="LEFT"`
79			`WIDTH="100%"></DIV`
80			`><DIV`
81			`CLASS="SECT1"`
82			`><H1`
83			`CLASS="SECT1"`
84			`><A`
85			`NAME="SETUP-SH-EDK7708">SH3/EDK7708 Hardware Setup</H1`
86			`><P`
87			`>The eCos Developer’s Kit package comes with a ROM`
88			`which provides GDB support for the Hitachi EDK7708 board (a big-endian`
89			`and a little-endian version). Images of these ROMs are also provided`
90			`at <TT`
91			`CLASS="FILENAME"`
92			`>loaders/sh-edk7708/gdbload.bin</TT`
93			`> and`
94			`<TT`
95			`CLASS="FILENAME"`
96			`>loaders/sh-edk7708le/gdbload.bin</TT`
97			`> under`
98			`the root of your eCos installation.</P`
99			`><P`
100			`>The ROM is installed to socket U6 on the board. When using`
101			`the big-endian ROM, jumper 9 must be set to 2-3. When using the`
102			`little-endian ROM, jumper 9 must be set to 1-2. Attention should`
103			`be paid to the correct orientation of the ROM during installation.`
104			`Only replace the board"s existing ROM using a proper PLCC extraction`
105			`tool, as the socket would otherwise risk being damaged. </P`
106			`><P`
107			`>If you are going to program a new ROM or FLASH using the binary`
108			`image, you may have to experiment to get the right byte-order in`
109			`the device. Depending on the programming software you use, it might`
110			`be necessary to enable byte-swapping. If the GDB stub ROM/FLASH`
111			`you program does not work, try reversing the byte-order.</P`
112			`><P`
113			`>The GDB stub in the EPROM allows communication with GDB using`
114			`the serial port at connector J1. The communication parameters are`
115			`fixed at 38400 baud, 8 data bits, no parity bit and 1 stop bit (8-N-1).`
116			`No flow control is employed. Connection to the host computer should`
117			`be made using the dedicated serial cable included in the EDK package. </P`
118			`><DIV`
119			`CLASS="SECT2"`
120			`><H2`
121			`CLASS="SECT2"`
122			`><A`
123			`NAME="AEN4067">Installing the Stubs into FLASH</H2`
124			`><DIV`
125			`CLASS="SECT3"`
126			`><H3`
127			`CLASS="SECT3"`
128			`><A`
129			`NAME="AEN4069">Preparing the Binaries</H3`
130			`><P`
131			`>These two binary preparation steps are not strictly necessary`
132			`as the eCos distribution ships with pre-compiled binaries in the`
133			`directory loaders/sh-edk7708 and loaders/sh-edk7708le`
134			`relative to the installation root.</P`
135			`><DIV`
136			`CLASS="SECT4"`
137			`><H4`
138			`CLASS="SECT4"`
139			`><A`
140			`NAME="AEN4072">Building the ROM images with the eCos Configuration Tool</H4`
141			`><P`
142			`></P`
143			`><OL`
144			`TYPE="1"`
145			`><LI`
146			`><P`
147			`>Start with a new document - selecting the`
148			`<SPAN`
149			`CLASS="emphasis"`
150			`><I`
151			`CLASS="EMPHASIS"`
152			`>File->New</I`
153			`></SPAN`
154			`>`
155			`menu item if necessary to do this.</P`
156			`></LI`
157			`><LI`
158			`><P`
159			`>Choose the`
160			`<SPAN`
161			`CLASS="emphasis"`
162			`><I`
163			`CLASS="EMPHASIS"`
164			`>Build->Templates</I`
165			`></SPAN`
166			`>`
167			`menu item, and then select the SH EDK7708 hardware.</P`
168			`></LI`
169			`><LI`
170			`><P`
171			`>While still displaying the`
172			`<SPAN`
173			`CLASS="emphasis"`
174			`><I`
175			`CLASS="EMPHASIS"`
176			`>Build->Templates</I`
177			`></SPAN`
178			`>`
179			`dialog box, select the “stubs” package template`
180			`to build a GDB stub. Click`
181			`<SPAN`
182			`CLASS="emphasis"`
183			`><I`
184			`CLASS="EMPHASIS"`
185			`>OK</I`
186			`></SPAN`
187			`>.</P`
188			`></LI`
189			`><LI`
190			`><P`
191			`>If building a little-endian image, disable the “Use`
192			`big-endian mode” option in the SH EDK7708 HAL (CYGHWR_HAL_SH_BIGENDIAN).</P`
193			`></LI`
194			`><LI`
195			`><P`
196			`>Build eCos using`
197			`<SPAN`
198			`CLASS="emphasis"`
199			`><I`
200			`CLASS="EMPHASIS"`
201			`>Build->Library</I`
202			`></SPAN`
203			`>. </P`
204			`></LI`
205			`><LI`
206			`><P`
207			`>When the build completes, the image files can be found`
208			`in the bin/ subdirectory of the install tree. GDB stub`
209			`ROM images have the prefix “gdb_module”.</P`
210			`></LI`
211			`></OL`
212			`></DIV`
213			`><DIV`
214			`CLASS="SECT4"`
215			`><H4`
216			`CLASS="SECT4"`
217			`><A`
218			`NAME="AEN4092">Building the ROM images with ecosconfig</H4`
219			`><P`
220			`></P`
221			`><OL`
222			`TYPE="1"`
223			`><LI`
224			`><P`
225			`>Make an empty directory to contain the build tree,`
226			`and cd into it.</P`
227			`></LI`
228			`><LI`
229			`><P`
230			`>To build a GDB stub ROM image, enter the command:`
231
232			`<TABLE`
233			`BORDER="5"`
234			`BGCOLOR="#E0E0F0"`
235			`WIDTH="70%"`
236			`><TR`
237			`><TD`
238			`><PRE`
239			`CLASS="PROGRAMLISTING"`
240			`>$ ecosconfig new edk7708 stubs</PRE`
241			`></TD`
242			`></TR`
243			`></TABLE`
244			`>`
245			`</P`
246			`></LI`
247			`><LI`
248			`><P`
249			`>If building a little-endian image, uncomment the user`
250			`value in ecos.ecc for CYGHWR_HAL_SH_BIGENDIAN`
251			`and change it to 0. </P`
252			`></LI`
253			`><LI`
254			`><P`
255			`>Enter the commands:`
256
257			`<TABLE`
258			`BORDER="5"`
259			`BGCOLOR="#E0E0F0"`
260			`WIDTH="70%"`
261			`><TR`
262			`><TD`
263			`><PRE`
264			`CLASS="PROGRAMLISTING"`
265			`>$ ecosconfig tree`
266			`$ make </PRE`
267			`></TD`
268			`></TR`
269			`></TABLE`
270			`></P`
271			`></LI`
272			`><LI`
273			`><P`
274			`>When the build completes, the image files can be found`
275			`in the bin/ subdirectory of the install tree. GDB stub`
276			`ROM images have the prefix “gdb_module”.</P`
277			`></LI`
278			`></OL`
279			`></DIV`
280			`></DIV`
281			`><DIV`
282			`CLASS="SECT3"`
283			`><H3`
284			`CLASS="SECT3"`
285			`><A`
286			`NAME="AEN4107">Installing the Stubs into ROM or FLASH</H3`
287			`><P`
288			`></P`
289			`><OL`
290			`TYPE="1"`
291			`><LI`
292			`><P`
293			`>Program the binary image file gdb_module.bin`
294			`into ROM or FLASH referring to the instructions of your ROM programmer.</P`
295			`></LI`
296			`><LI`
297			`><P`
298			`>Plug the ROM/FLASH into socket U6. If the image`
299			`is little-endian set jumper 9 to 1-2. If the image is big-endian`
300			`set jumper 9 to 2-3.</P`
301			`></LI`
302			`></OL`
303			`></DIV`
304			`></DIV`
305			`></DIV`
306			`><DIV`
307			`CLASS="NAVFOOTER"`
308			`><HR`
309			`ALIGN="LEFT"`
310			`WIDTH="100%"><TABLE`
311			`SUMMARY="Footer navigation table"`
312			`WIDTH="100%"`
313			`BORDER="0"`
314			`CELLPADDING="0"`
315			`CELLSPACING="0"`
316			`><TR`
317			`><TD`
318			`WIDTH="33%"`
319			`ALIGN="left"`
320			`VALIGN="top"`
321			`><A`
322			`HREF="setup-arm-ipaq.html"`
323			`ACCESSKEY="P"`
324			`>Prev</A`
325			`></TD`
326			`><TD`
327			`WIDTH="34%"`
328			`ALIGN="center"`
329			`VALIGN="top"`
330			`><A`
331			`HREF="ecos-user-guide.html"`
332			`ACCESSKEY="H"`
333			`>Home</A`
334			`></TD`
335			`><TD`
336			`WIDTH="33%"`
337			`ALIGN="right"`
338			`VALIGN="top"`
339			`><A`
340			`HREF="setup-sh-cq7708.html"`
341			`ACCESSKEY="N"`
342			`>Next</A`
343			`></TD`
344			`></TR`
345			`><TR`
346			`><TD`
347			`WIDTH="33%"`
348			`ALIGN="left"`
349			`VALIGN="top"`
350			`>Compaq iPAQ PocketPC Hardware Setup</TD`
351			`><TD`
352			`WIDTH="34%"`
353			`ALIGN="center"`
354			`VALIGN="top"`
355			`><A`
356			`HREF="appendix-target-setup.html"`
357			`ACCESSKEY="U"`
358			`>Up</A`
359			`></TD`
360			`><TD`
361			`WIDTH="33%"`
362			`ALIGN="right"`
363			`VALIGN="top"`
364			`>SH3/CQ7708 Hardware Setup</TD`
365			`></TR`
366			`></TABLE`
367			`></DIV`
368			`></BODY`
369			`></HTML`
370			`>`

Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [ecos-2.0/] [doc/] [html/] [user-guide/] [setup-sh-edk7708.html] - Blame information for rev 1254