Subversion Repositories or1k

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

// Copyright (C) 2002 Gary Thomas

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

/*------------------------------------------------------------------

*

* FILE: EnetPHY.c

*

* DESCRIPTION:   LXT970a driver header file

*

*

* Modified for MPC8260 VADS board

*-------------------------------------------------------------------*/

#ifndef _EnetPHY_H 

#define _EnetPHY_H

#include "types.h"

// Board control and status registers

typedef struct bcsr {

  UINT32  bcsr0;

  UINT32  bcsr1;

  UINT32  bcsr2;

  UINT32  bcsr3;

} t_BCSR;

// Fast ethernet enable/reset pins on bcsr

#define FETHIEN_ 0x08000000

#define FETHRST_ 0x04000000

/**************************/

/* The API for PHY Device */

/**************************/

void   EnableResetPHY(volatile t_BCSR *pBCSR);

UINT16 InitEthernetPHY(VUINT32* pdir, VUINT32* pdat, UINT16 link);

UINT16 EthernetPHYInterruptHandler(void);

void   EnablePHYinterrupt(UINT8 enable);

UINT16 LinkTestPHY(void);

typedef enum MDIORW {READ, WRITE} MDIORW;

#define LINKERROR   0xFFFF

#define NOTLINKED   0x0000

#define TEN_HD      0x0020

#define TEN_FD      0x0040

#define HUNDRED_HD  0x0080

#define HUNDRED_FD  0x0100

#define MD_TEST_FRAME 0xDEAD

//8260 VADS Pin Connections

#define MDIO_PIN_MASK 0x00400000        //PC9  for 8260 VADS

#define MDC_PIN_MASK  0x00200000        //PC10 for 8260 VADS

//#define MDIO_PIN_MASK 0x00000200        //PC9  for 8260 VADS

//#define MDC_PIN_MASK  0x00000400        //PC10 for 8260 VADS

//IEEE 802.3 PHY Register Definitions

#define CONTROL_REG              0

#define STATUS_REG               1

#define PHY_ID_REG_A             2

#define PHY_ID_REG_B             3

#define AUTONEG_AD_REG           4

#define AUTONEG_LINKPARTNER_REG  5

#define AUTONEG_EXP_REG          6

//LXT970a Specific Register Definitions

#define MIRROR_REG              16

#define INT_EN_REG              17

#define INT_STAT_REG            18

#define CONFIG_REG              19

#define CHIP_STAT_REG           20

//Clock Timing Control

#define MDC_HOLD_TIME           50

#endif