| 1 |
1254 |
phoenix |
2002-12-07 Gary Thomas
|
| 2 |
|
|
|
| 3 |
|
|
* misc/redboot_ROMRAM.ecm:
|
| 4 |
|
|
* misc/redboot_ROM.ecm:
|
| 5 |
|
|
* misc/redboot_RAM.ecm: Suppress building Linux 'exec' command
|
| 6 |
|
|
(which makes little sense on this platform).
|
| 7 |
|
|
|
| 8 |
|
|
2002-09-23 Gary Thomas on behalf of
|
| 9 |
|
|
2002-11-23 Scott Dattalo
|
| 10 |
|
|
|
| 11 |
|
|
* include/plf_io.h: Add some missing register definitions.
|
| 12 |
|
|
|
| 13 |
|
|
2002-05-28 Thomas Koeller
|
| 14 |
|
|
|
| 15 |
|
|
* include/plf_io.h: Add watchdog definitions.
|
| 16 |
|
|
|
| 17 |
|
|
2002-05-08 Gary Thomas
|
| 18 |
|
|
|
| 19 |
|
|
* misc/redboot_ROMRAM.ecm:
|
| 20 |
|
|
* misc/redboot_ROM.ecm: Disable 'fconfig' since the FLASH is too small.
|
| 21 |
|
|
|
| 22 |
|
|
2001-08-17 George Hampton
|
| 23 |
|
|
2001-08-17 Gary Thomas
|
| 24 |
|
|
|
| 25 |
|
|
* include/hal_platform_ints.h (CYGNUM_HAL_ISR_COUNT): PR 22864
|
| 26 |
|
|
Don't adjust by "min" value if not doing translations.
|
| 27 |
|
|
|
| 28 |
|
|
2001-07-26 Gary Thomas
|
| 29 |
|
|
|
| 30 |
|
|
* src/at91_misc.c (hal_clock_initialize):
|
| 31 |
|
|
* cdl/hal_arm_at91.cdl: Increase system clock (RTC) to run at 1MHz for
|
| 32 |
|
|
better timing resolution. CAUTION! this means that the system clock tick
|
| 33 |
|
|
can never be more than 64ms.
|
| 34 |
|
|
|
| 35 |
|
|
2001-07-23 Gary Thomas
|
| 36 |
|
|
|
| 37 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_romram.mlt:
|
| 38 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_romram.ldi:
|
| 39 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_romram.h:
|
| 40 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_ram.mlt:
|
| 41 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_ram.ldi:
|
| 42 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_ram.h:
|
| 43 |
|
|
* cdl/hal_arm_at91.cdl: Fix MLT files (names, layout).
|
| 44 |
|
|
|
| 45 |
|
|
2001-07-20 Gary Thomas
|
| 46 |
|
|
|
| 47 |
|
|
* include/plf_io.h: Add UART interrupt definitions.
|
| 48 |
|
|
|
| 49 |
|
|
* src/hal_diag.c (cyg_hal_plf_serial_control): Enable ^C support.
|
| 50 |
|
|
|
| 51 |
|
|
* src/at91_misc.c (hal_clock_initialize): Add clock/rtc implementation.
|
| 52 |
|
|
|
| 53 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_romram.ldi:
|
| 54 |
|
|
Replace missing 'fixed vectors'.
|
| 55 |
|
|
|
| 56 |
|
|
2001-07-19 Gary Thomas
|
| 57 |
|
|
|
| 58 |
|
|
* misc/redboot_ROMRAM.ecm: New exported config.
|
| 59 |
|
|
|
| 60 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_romram.ldi:
|
| 61 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_ram.mlt:
|
| 62 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_ram.ldi:
|
| 63 |
|
|
* include/hal_platform_setup.h: Fix ROMRAM startup mode. Note: I
|
| 64 |
|
|
can't get the onboard SRAM at 0x00100000 to work, so for now, this
|
| 65 |
|
|
will just have to go in low external RAM. Thus the change for the
|
| 66 |
|
|
RAM base address in startup=RAM mode.
|
| 67 |
|
|
|
| 68 |
|
|
* src/hal_diag.c (cyg_hal_plf_serial_getc_timeout): Remove debug code.
|
| 69 |
|
|
|
| 70 |
|
|
* src/at91_misc.c (set_leds): LEDs are on D4/D2/D1.
|
| 71 |
|
|
|
| 72 |
|
|
* misc/redboot_ROM.ecm:
|
| 73 |
|
|
* misc/redboot_RAM.ecm: Exported configurations.
|
| 74 |
|
|
|
| 75 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_romram.mlt:
|
| 76 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_romram.ldi:
|
| 77 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_romram.h: New startup type.
|
| 78 |
|
|
|
| 79 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_rom.h: Fix heap layout.
|
| 80 |
|
|
|
| 81 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_ram.mlt:
|
| 82 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_ram.ldi:
|
| 83 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_ram.h:
|
| 84 |
|
|
Fix heap layout. Move RAM load address to leave room for RedBoot/GDB.
|
| 85 |
|
|
|
| 86 |
|
|
* include/plf_io.h: Add definitions for PIO, EBI and PS.
|
| 87 |
|
|
|
| 88 |
|
|
* include/hal_platform_setup.h: ROM startup mode now works.
|
| 89 |
|
|
First attempt at ROMRAM startup - not yet working.
|
| 90 |
|
|
|
| 91 |
|
|
* cdl/hal_arm_at91.cdl: Add ROMRAM startup mode.
|
| 92 |
|
|
|
| 93 |
|
|
2001-07-18 Gary Thomas
|
| 94 |
|
|
|
| 95 |
|
|
* src/hal_diag.c: More complete initialization.
|
| 96 |
|
|
|
| 97 |
|
|
* src/at91_misc.c: Support interrupt controller, delay_us().
|
| 98 |
|
|
|
| 99 |
|
|
* include/plf_io.h: Add interrupt controller, timer definitions.
|
| 100 |
|
|
|
| 101 |
|
|
* cdl/hal_arm_at91.cdl: Fix clock speed, number I/O channels.
|
| 102 |
|
|
|
| 103 |
|
|
2001-07-16 Gary Thomas
|
| 104 |
|
|
|
| 105 |
|
|
* src/hal_diag.c:
|
| 106 |
|
|
* src/at91_misc.c:
|
| 107 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_rom.mlt:
|
| 108 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_rom.ldi:
|
| 109 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_rom.h:
|
| 110 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_ram.mlt:
|
| 111 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_ram.ldi:
|
| 112 |
|
|
* include/pkgconf/mlt_arm_at91_eb40_ram.h:
|
| 113 |
|
|
* include/plf_stub.h:
|
| 114 |
|
|
* include/plf_io.h:
|
| 115 |
|
|
* include/hal_platform_setup.h:
|
| 116 |
|
|
* include/hal_platform_ints.h:
|
| 117 |
|
|
* include/hal_diag.h:
|
| 118 |
|
|
* include/hal_cache.h:
|
| 119 |
|
|
* cdl/hal_arm_at91.cdl: New port - cloned from E7T.
|
| 120 |
|
|
|
| 121 |
|
|
//===========================================================================
|
| 122 |
|
|
//####ECOSGPLCOPYRIGHTBEGIN####
|
| 123 |
|
|
// -------------------------------------------
|
| 124 |
|
|
// This file is part of eCos, the Embedded Configurable Operating System.
|
| 125 |
|
|
// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
|
| 126 |
|
|
//
|
| 127 |
|
|
// eCos is free software; you can redistribute it and/or modify it under
|
| 128 |
|
|
// the terms of the GNU General Public License as published by the Free
|
| 129 |
|
|
// Software Foundation; either version 2 or (at your option) any later version.
|
| 130 |
|
|
//
|
| 131 |
|
|
// eCos is distributed in the hope that it will be useful, but WITHOUT ANY
|
| 132 |
|
|
// WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
| 133 |
|
|
// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
| 134 |
|
|
// for more details.
|
| 135 |
|
|
//
|
| 136 |
|
|
// You should have received a copy of the GNU General Public License along
|
| 137 |
|
|
// with eCos; if not, write to the Free Software Foundation, Inc.,
|
| 138 |
|
|
// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
|
| 139 |
|
|
//
|
| 140 |
|
|
// As a special exception, if other files instantiate templates or use macros
|
| 141 |
|
|
// or inline functions from this file, or you compile this file and link it
|
| 142 |
|
|
// with other works to produce a work based on this file, this file does not
|
| 143 |
|
|
// by itself cause the resulting work to be covered by the GNU General Public
|
| 144 |
|
|
// License. However the source code for this file must still be made available
|
| 145 |
|
|
// in accordance with section (3) of the GNU General Public License.
|
| 146 |
|
|
//
|
| 147 |
|
|
// This exception does not invalidate any other reasons why a work based on
|
| 148 |
|
|
// this file might be covered by the GNU General Public License.
|
| 149 |
|
|
//
|
| 150 |
|
|
// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.
|
| 151 |
|
|
// at http://sources.redhat.com/ecos/ecos-license/
|
| 152 |
|
|
// -------------------------------------------
|
| 153 |
|
|
//####ECOSGPLCOPYRIGHTEND####
|
| 154 |
|
|
//===========================================================================
|
