Subversion Repositories or1k

#ifndef CYGONCE_HAL_CMA230_H

#define CYGONCE_HAL_CMA230_H

/*=============================================================================

//

//      hal_cma230.h

//

//      HAL Support for Kernel Diagnostic Routines

//

//=============================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

//=============================================================================

//#####DESCRIPTIONBEGIN####

//

// Author(s):    gthomas

// Contributors: gthomas

// Date:         1999-04-19

// Purpose:      Cogent CMA230 hardware description

// Description:

// Usage:        #include <cyg/hal/hal_cma230.h>

//

//####DESCRIPTIONEND####

//

//===========================================================================*/

// Note: these defintions match the documentation, thus no attempt is made

// to sanitise (mangle) the names.  Also, care should be taken to keep this

// clean for use in assembly code (no "C" constructs).

#define CMA230_ISR  0x0F600000  // Interrupt source register    - Read only

#define CMA230_CLR  0x0F600008  // Clear interrupt source       - Write only

#define CMA230_IMRr 0x0F600010  // Interrupt mask register      - Read only

#define CMA230_IMRw 0x0F600018  // Interrupt mask register      - Write only

#define CMA230_ACK1 0x0F600020  // Interrupt acknowledge slot 1 - Read only

#define CMA230_ACK2 0x0F600028  // Interrupt acknowledge slot 2 - Read only

#define CMA230_ACK3 0x0F600030  // Interrupt acknowledge slot 3 - Read only

#define CMA230_TC_COUNT     0x0F700020  // Timer value   - 16 bits - Read only

#define CMA230_TC_PRELOAD   0x0F700028  // Timer preload - 16 bits - Write only

#define CMA230_TC_CLEAR     0x0F700030  // Timer clear             - Write only

#define CMA230_TC_ENABLE    0x0F700038  // Timer enable/start      - Write only

// Motherboard definitions

#define CMA101_DUARTB      0x0E900000  // Base address

#define CMA101_DUARTB_RHR  0x0E900000  // Receive holding register

#define CMA101_DUARTB_THR  0x0E900000  // Transmit holding register

#define CMA101_DUARTB_LBR  0x0E900000  // Low byte of baud rate

#define CMA101_DUARTB_IER  0x0E900008  // Interrupt enable

#define CMA101_DUARTB_HBR  0x0E900008  // High byte of baud rate

#define CMA101_DUARTB_ISR  0x0E900010  // Interrupt status

#define CMA101_DUARTB_FCTL 0x0E900010  // FIFO control

#define CMA101_DUARTB_LCTL 0x0E900018  // Line control

#define CMA101_DUARTB_MCTL 0x0E900020  // Modem control

#define CMA101_DUARTB_LSR  0x0E900028  // Line status

#define CMA101_DUARTB_MSR  0x0E900030  // Modem status

#define CMA101_DUARTB_SCR  0x0E900038  // Scratch

#define CMA101_DUARTA      0x0E900040  // Base address

#define CMA101_DUARTA_RHR  0x0E900040  // Receive holding register

#define CMA101_DUARTA_THR  0x0E900040  // Transmit holding register

#define CMA101_DUARTA_LBR  0x0E900040  // Low byte of baud rate

#define CMA101_DUARTA_IER  0x0E900048  // Interrupt enable

#define CMA101_DUARTA_HBR  0x0E900048  // High byte of baud rate

#define CMA101_DUARTA_ISR  0x0E900050  // Interrupt status

#define CMA101_DUARTA_FCTL 0x0E900050  // FIFO control

#define CMA101_DUARTA_LCTL 0x0E900058  // Line control

#define CMA101_DUARTA_MCTL 0x0E900060  // Modem control

#define CMA101_DUARTA_LSR  0x0E900068  // Line status

#define CMA101_DUARTA_MSR  0x0E900070  // Modem status

#define CMA101_DUARTA_SCR  0x0E900078  // Scratch

/*---------------------------------------------------------------------------*/

/* end of hal_cma230.h                                                         */

#endif /* CYGONCE_HAL_CMA230_H */