Subversion Repositories or1k

2002-10-26  Gary Thomas   (inspired by)

2002-10-26  Gordon Schumacher 

        * include/hal_sa11x0.h: Make ROM/RAM/FLASH space layout clearer.

2002-10-25  Gary Thomas   (inspired by)

2002-10-25  Gordon Schumacher 

        * include/hal_sa11x0.h: Add SRAM definitions.

2002-08-12  Mark Salter  

        * cdl/hal_arm_sa11x0.cdl: Remove CYGSEM_REDBOOT_ARM_LINUX_BOOT

        requirement.

2002-05-18  Gary Thomas  

        * src/hal_diag.c (cyg_hal_plf_serial_control): Fix return value

        when changing the baud rate.

2002-05-01  Gary Thomas  

        * tests/mmap_test.c: Diagnostic prints for failure cases.

2002-04-24  Jesper Skov  

        * cdl/hal_arm_sa11x0.cdl: CYGPRI_KERNEL_TESTS_DHRYSTONE_PASSES added.

2002-01-29  Jesper Skov  

        * cdl/hal_arm_sa11x0.cdl: Removed CRUFT_H.

        * include/hal_sa11x0.h: Moved CYGARC_PHYSICAL_ADDRESS definition

        to:

        * include/var_io.h: this file.

2002-01-28  Jesper Skov  

        * cdl/hal_arm_sa11x0.cdl: Declare var_io.h file.

        Tug RedBoot requirements away in a component properly controlled

        by the RedBoot presence.

        * include/var_io.h: Added.

2002-01-25  Jesper Skov  

        * include/hal_sa11x0.h (CYGARC_PHYSICAL_ADDRESS): Added.

        * src/redboot_linux_exec.c: Moved to arch directory.

        * cdl/hal_arm_sa11x0.cdl: Replaced options with requirements to

        arch options.

2002-01-25  David Woodhouse  

        * src/redboot_linux_exec.c (do_exec): Trick the compiler into

        thinking that the end1 and lab1 labels are both actually used,

        so it doesn't move them around.

2002-01-22  David Woodhouse  

        * src/redboot_linux_exec.c (do_exec): Pass ATAG_MEM to Linux

        kernel, having tried to obtain the appropriate numbers from the

        MLT header file. This could probably do with some improvement -

        the actual information we need isn't necessarily present in the

        required form.

2002-01-14  David Woodhouse  

        * src/redboot_linux_exec.c (do_exec): Use load start/end

        parameters as defaults. Don't copy image if specified length is

        zero.

2001-10-31  Jonathan Larmour  

        * cdl/hal_arm_sa11x0.cdl: Indicate support of variable baud rates.

2001-10-09  Hugo Tyson  

        * src/hal_diag.c (cyg_hal_plf_serial_isr): As well as the sticky

        Rx Idle bit, clear the sticky bits for interrupts for start or end

        of a line break, otherwise messing with the wiring can cause an

        interrupt loop and hang the target.

2001-08-22  Gary Thomas  

        * src/redboot_linux_exec.c:

        printf() is no longer a part of RedBoot.  Thus all programs

        must use diag_printf() and related functions instead.

2001-08-21  Hugo Tyson  

        * include/hal_var_ints.h (HAL_CLOCK_LATENCY()): Define this if

        it's needed, for the routine below.

        * src/sa11x0_misc.c (hal_clock_latency): A neater fix for the

        below change: use a separate routine for measuring latency, which

        assumes it is called in the ISR, before the clock is reset.

2001-08-20  Hugo Tyson  

        * src/sa11x0_misc.c (hal_clock_read): Make hal_clock_read() return

        the true value (as expected by the kernel latency test) from the

        last interrupt if we just had that interrupt and didn't yet reset

        the clock.  Otherwise ISR latencies are reported as one tick (1cS,

        10000uS) too large.

2001-07-27  Gary Thomas  

        * src/redboot_linux_exec.c: Fix copyright disclaimers to satisfy

        original owner (Linux kernel maintainer Russell King).

2001-07-23  Gary Thomas  

        * src/sa11x0_misc.c (hal_IRQ_handler): Support board/platform

        specific [extended] interrupts.  On the SA11x0, these would often

        be cascaded via GPIO logic.  Use of extended macros allows SA11x0

        variant code to handle the general case, with board specific code

        defined by board packages.  Look at the iPAQ board package for

        a sample of how to use this.

2001-05-19  Gary Thomas  

        * src/redboot_linux_exec.c (do_exec): Protect compilation - scripting

        is configurable.

2001-05-17  Gary Thomas  

        * src/hal_diag.c: Allow baud rate to be settable.

2001-04-16  Gary Thomas  

        * cdl/hal_arm_sa11x0.cdl: Add CDL to describe CPU family.

2001-03-23  Gary Thomas  

        * src/redboot_linux_exec.c (do_exec):

        Entry point must be a physical address.

        * cdl/hal_arm_sa11x0.cdl:

        Allow platforms to override default clock speed.

2001-03-20  Gary Thomas  

        * src/redboot_linux_exec.c (do_exec): Improve wait timeout.

2001-03-07  Hugo Tyson  

        * src/redboot_linux_exec.c: Do not build anything if

        HAL_PLATFORM_MACHINE_TYPE is not defined.

2001-03-02  Gary Thomas  

        * cdl/hal_arm_sa11x0.cdl: HAL_PLF_INIT stuff moved to hal/common.

2001-03-01  Gary Thomas  

        * src/sa11x0_misc.c:

        * cdl/hal_arm_sa11x0.cdl: New interface CYGINT_HAL_PLF_IF_INIT

        which, if defined, indicates that the platform has plf_if_init.

2001-03-01  Hugo Tyson  

        * src/sa11x0_misc.c: Remove warnings from lack of prototype for

        plf_if_init() - for platforms that don't have it.

2001-02-28  Gary Thomas  

        * src/sa11x0_misc.c: Allow platform to perform additional

        I/O initialization (virtual vector based).  The function

        plf_if_init() can be overridden by platform code for this.

2001-02-28  Hugo Tyson  

        * include/hal_sa11x0.h (SA11X0_TUCR_RESERVED_BITS):

        (SA11X0_TUCR_EXTERNAL_MEMORY_MASTER): Add definitions of these

        bits for enabling an external bus master.

2001-02-28  Hugo Tyson  

        * include/hal_sa11x0.h (SA11X0_OWER): Add OS Timer Watchdog Match

        Enable Register for use by Watchdog package.

        (SA11X0_OWER_ENABLE): And a long-winded "1" to enable it.

2001-02-24  Gary Thomas  

        * cdl/hal_arm_sa11x0.cdl: Add RedBoot commands/options.

        * src/redboot_linux_exec.c: New file - RedBoot commands to

        support booting Linux kernel.

2001-02-23  Jesper Skov  

        * include/hal_cache.h (HAL_FLASH_CACHES_OLD_MACROS): Some

        platforms use deprecated cache handling macros.

2001-02-20  Jonathan Larmour  

        * cdl/hal_arm_sa11x0.cdl: Clarify CYGHWR_HAL_ARM_SA11X0_UART1,3

        description.

2001-02-20  Gary Thomas  

        * src/hal_diag.c:

        * cdl/hal_arm_sa11x0.cdl: Add CDL to control which serial ports

        are available/used.

2001-02-20  Hugo Tyson  

2001-02-12  Robin Farine  

        * include/hal_sa11x0.h (SA11X0_IRQ_GPIO_9_EDGE_DETECT): Define

        this to be 9 not 0 - simple typo.  Thanks Robin!

2001-02-19  Hugo Tyson  

2001-02-12  Robin Farine  

        * src/sa11x0_misc.c (hal_clock_reset): Handles SA11X0_OSCR as a

        free running counter.

        (hal_clock_read): Adapts to changes in hal_clock_reset().

        (hal_delay_us): Likewise.

        There is only one counting register (OSCR), but multiple match

        registers and interrupt sources (OSMR1-OSMR3).  Setting our match

        register to COUNT and the counter register to 0 each tick makes it

        very hard to use the other match registers - whereas they are

        intended for easy general use.

        This change sets our match register OSMR0 to the next time

        interval and leaves the OSCR freerunning so that other match

        registers can easily be used, which is much more flexible, and

        much more what was intented.

        Because the OSCR is just a counter, and the match registers

        compare only for exact equality, no special measures to deal with

        the counter wrapping/overflowing are needed.

2001-02-08  Jesper Skov  

        * src/hal_diag.c: Replace CYGSEM_HAL_DIAG_MANGLER_None with

        CYGDBG_HAL_DIAG_TO_DEBUG_CHAN.

2001-02-01  Jesper Skov  

        * include/hal_var_ints.h: Include registers definitions used in

        reset macro.

2001-01-31  Jesper Skov  

        * src/hal_diag.c: Replaced CYGDBG_HAL_DIAG_DISABLE_GDB_PROTOCOL

        with CYGSEM_HAL_DIAG_MANGLER_None

2001-01-26  Jesper Skov  

        * src/hal_diag.c: Removed CYGSEM_HAL_VIRTUAL_VECTOR_DIAG check.

        * include/plf_stub.h: Moved reset macro to

        * include/hal_var_ints.h: this file.

2001-01-05  Hugo Tyson  

        * include/hal_mm.h: Change bitfields within memmap entry to

        unsigned, so that we can compare values successfully - otherwise

        "0x02" sign-extends and is never equal after promotion!

        * include/hal_cache.h: Include the platform memory map

        interrogation definitions from  and header for

        the new functions below.

        * src/sa11x0_misc.c (hal_virt_to_phys_address):

        (hal_phys_to_virt_address):

        (hal_virt_to_uncached_address): New functions which inspect the

        real memory map in force to verify the static translations defined

        in the efficient macro versions.

        * tests/mmap_test.c (endif): New file: testcase for memory map

        interrogation macros and verification functions.

        * cdl/hal_arm_sa11x0.cdl: Build the testcase.

2000-12-13  Hugo Tyson  

        * cdl/hal_arm_sa11x0.cdl: Define a symbol CYGBLD_HAL_VAR_INTS_H so

        that the architectural HAL can see  below.

        * include/hal_var_ints.h: New file; actually a copy of all the

        platforms' hal_platform_ints.h for all the sa11x0 platforms.

        * include/hal_mm.h: New file; actually an excerpt from all the

        platforms' $PLATFORM_misc.h for all the sa11x0 platforms, which

        describes MM table layout and macros for initializing it.

2000-12-12  Gary Thomas  

        * cdl/hal_arm_sa11x0.cdl: Allow RTC clock rate to be changable.

2000-12-04  Hugo Tyson  

        * include/hal_cache.h: Consistently ensure that ARM registers used

        in MCR ops to cache-control coprocessors, where the data doesn't

        matter, all actually have data zero ("SBZ") as in the Jaggar book.

        This may well not be necessary, but for the sake of making sure...

2000-12-01  Hugo Tyson  

        * include/hal_cache.h: Define addressable cache line operations

        HAL_DCACHE_STORE(), HAL_DCACHE_INVALIDATE(), HAL_DCACHE_FLUSH()

        now that I have understood how come the test (kcache2) was

        failing.  See kernel ChangeLog for details.  Also tidied up a

        couple of other minor details.

2000-11-27  Gary Thomas  

        * src/hal_diag.c (init_channel): UART setup required on Brutus as well.

2000-11-21  Gary Thomas  

        * src/hal_diag.c (init_channel): Disable broken uart setups on platforms

        other than the SA1110MM, since this code seems to be somewhat broken.

2000-10-25  Drew Moseley  

        * src/hal_diag.c: Added UART1 support for SA1100 targets.

        * include/hal_sa11x0.h: Added GPIO bit definitions.

2000-07-14  Gary Thomas  

        * include/hal_diag.h (HAL_DELAY_US): Define.

        * src/sa11x0_misc.c (hal_delay_us): New function.  Used to

        provide timers/delays in non-kernel systems.

2000-07-05  Jesper Skov  

        * cdl/hal_arm_sa11x0.cdl:

        * src/hal_diag.c:

        Cleaned up channel options.

        * src/hal_diag.c: Use per-channel structure instead of code cruft.

2000-06-30  Jesper Skov  

        * src/hal_diag.c: calling i/f macro changes.

2000-06-28  Jesper Skov  

        * cdl/hal_arm_sa11x0.cdl:

        * include/plf_stub.h:

        * src/plf_stub.c: [deleted]

        Stub uses vector table for all IO.

        * src/sa11x0_misc.c: Fix compiler warning.

2000-06-27  Jesper Skov  

        * src/hal_diag.c: Some fixes and code layout changes (Gary

        Thomas).

        * src/hal_diag.c:

        * include/hal_diag.h:

        * include/hal_sa11x0.h:

        Changed to initialize all procs tables. Added timeout getc, and

        proper debug channel switch behavior.

2000-06-24  Gary Thomas  

        * src/sa11x0_misc.c (hal_clock_reset): Add code to compensate for

        clock drift since this hardware does not reset on interrupts.

        (hal_clock_read): Also adjust the value returned here for same reason.

2000-06-22  Gary Thomas  

        * src/hal_diag.c (hal_diag_write_char):

        Fix typo: CYGINT_HAL_GDB_PORT_VECTOR to be CYGHWR_HAL_GDB_PORT_VECTOR

2000-06-19  Gary Thomas  

        * include/hal_diag.h:

        * include/plf_stub.h:

        * src/hal_diag.c:

        * src/sa11x0_misc.c: Update for virtual vector (debug) support.

2000-06-12  Gary Thomas  

        * src/hal_diag.c: Fix baud rates for 960,19200.  Take out "announce"

        string in ROM mode.

2000-06-05  Gary Thomas  

        * src/plf_stub.c:

        * include/plf_stub.h: 'sa1100' shared items renamed to 'sa11x0'.

        * src/sa11x0_misc.c (hal_IRQ_handler):

        (hal_interrupt_mask):

        (hal_interrupt_unmask):

        (hal_interrupt_acknowledge):

        (hal_interrupt_configure): Complete support for GPIO interrupts.

        Some of these are direct, others are grouped and the code needs

        to handle both.  Also update support for GPIO edge detect interrupt

        circuitry.

2000-06-04  Gary Thomas  

        * include/hal_cache.h:

        * src/hal_diag.c:

        * src/sa11x0_misc.c: Renaming of 'sa1100' shared stuff to be

        'sa11x0'.

        * include/hal_sa11x0.h: Renamed from 'hal_sa1100.h'.

2000-06-01  Gary Thomas  

        * src/sa11x0_misc.c: Enable caches.

        * include/hal_sa1100.h: Misc cleanups and additions necessary for

        ROM startup mode.

2000-05-10  Gary Thomas  

        * current/src/plf_stub.c:

        * current/src/hal_diag.c:

        * current/src/sa11x0_misc.c:

        * current/include/hal_diag.h:

        * current/include/hal_sa1100.h:

        * current/include/hal_cache.h:

        * current/include/plf_stub.h:

        * current/cdl/hal_arm_sa11x0.cdl: New file(s).

//===========================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

//===========================================================================