Subversion Repositories or1k

//==========================================================================

//

//        flow1.c

//

//        Test data half-duplex receive and send with flow control.

//

//==========================================================================

//####ECOSGPLCOPYRIGHTBEGIN####

// -------------------------------------------

// This file is part of eCos, the Embedded Configurable Operating System.

// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.

//

// eCos is free software; you can redistribute it and/or modify it under

// the terms of the GNU General Public License as published by the Free

// Software Foundation; either version 2 or (at your option) any later version.

//

// eCos is distributed in the hope that it will be useful, but WITHOUT ANY

// WARRANTY; without even the implied warranty of MERCHANTABILITY or

// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License

// for more details.

//

// You should have received a copy of the GNU General Public License along

// with eCos; if not, write to the Free Software Foundation, Inc.,

// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

//

// As a special exception, if other files instantiate templates or use macros

// or inline functions from this file, or you compile this file and link it

// with other works to produce a work based on this file, this file does not

// by itself cause the resulting work to be covered by the GNU General Public

// License. However the source code for this file must still be made available

// in accordance with section (3) of the GNU General Public License.

//

// This exception does not invalidate any other reasons why a work based on

// this file might be covered by the GNU General Public License.

//

// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc.

// at http://sources.redhat.com/ecos/ecos-license/

// -------------------------------------------

//####ECOSGPLCOPYRIGHTEND####

//==========================================================================

//#####DESCRIPTIONBEGIN####

//

// Author(s):     jskov,jlarmour

// Contributors:  

// Date:          2000-07-27

// Description:   Test the half-duplex receive and send capabilities of 

//                the serial driver with flow control.

// Requirements:  This test requires the ser_filter on the host side.

// 

//####DESCRIPTIONEND####

#include <pkgconf/system.h>

#include <cyg/infra/testcase.h>         // test macros

#include <cyg/infra/cyg_ass.h>          // assertion macros

#ifdef CYGPKG_KERNEL

# include <pkgconf/kernel.h>

#endif

#ifdef CYGPKG_IO_SERIAL

# include <pkgconf/io_serial.h>

#endif

// Package requirements

#ifndef CYGPKG_IO_SERIAL

# define NA_MSG "Requires I/O serial package"

#elif !defined(CYGFUN_KERNEL_API_C)

# define NA_MSG "Requires kernel C API"

#elif !defined(CYGPKG_IO_SERIAL_FLOW_CONTROL)

# define NA_MSG "Requires serial flow control"

#endif

#ifdef NA_MSG

void

cyg_start( void )

{

    CYG_TEST_INIT();

    CYG_TEST_NA( NA_MSG);

}

#else

#include <cyg/hal/hal_arch.h>           // CYGNUM_HAL_STACK_SIZE_TYPICAL

#include <cyg/kernel/kapi.h>

unsigned char stack[CYGNUM_HAL_STACK_SIZE_TYPICAL];

cyg_thread thread_data;

cyg_handle_t thread_handle;

// redefine buffer size for large transfer tests

#ifndef CYGPKG_HAL_ARM_AEB

# define IN_BUFFER_SIZE 65536

#endif

#include "ser_test_protocol.inl"

//---------------------------------------------------------------------------

// run the tests

static void

run_tests( cyg_io_handle_t ser_handle )

{

    // Start slowly, then go for max size.

    {

        test_binary(ser_handle,             16, MODE_EOP_ECHO);

        test_binary(ser_handle,            128, MODE_EOP_ECHO);

        test_binary(ser_handle,            256, MODE_EOP_ECHO);

        test_binary(ser_handle, IN_BUFFER_SIZE, MODE_EOP_ECHO);

    }

    // Write some varying length packets.

    {

        int i;

        for(i = 0; i < 8; i++) {

            // No echo.

            test_binary(ser_handle,   256 + 42*i, MODE_NO_ECHO);

            test_binary(ser_handle,    64 +  7*i, MODE_NO_ECHO);

            // Echo.

            test_binary(ser_handle,   256 + 42*i, MODE_EOP_ECHO);

            test_binary(ser_handle,    64 +  7*i, MODE_EOP_ECHO);

        }

    }

    // End with some long packets.

    {

        test_binary(ser_handle,  2048, MODE_NO_ECHO);

        test_binary(ser_handle, 16384, MODE_NO_ECHO);

        test_binary(ser_handle, 65536, MODE_NO_ECHO);

    }

}

//---------------------------------------------------------------------------

// Serial test main function.

void

serial_test( void )

{

    cyg_io_handle_t ser_handle;

    cyg_ser_cfg_t *cfg=&test_configs[0];

    cyg_ser_cfg_t new_cfg;

    int count = sizeof(test_configs) / sizeof(cyg_ser_cfg_t);

    int i;

    test_open_ser(&ser_handle);

    // We need the filter for this test.

    test_ping(ser_handle);

    // Choose the configuration with the fastest baud rate, to be most

    // provocative. Start at 1 coz cfg already points at 0

    for (i=1; i<count; i++) {

        if (cfg->baud_rate < test_configs[i].baud_rate)

            cfg=&test_configs[i];

    }

    // Set flow control from configuration

    // Choose software first

#ifdef CYGOPT_IO_SERIAL_FLOW_CONTROL_SOFTWARE

    CYG_TEST_INFO("Setting software flow control");

    new_cfg = *cfg;

    new_cfg.flags |= CYGNUM_SERIAL_FLOW_XONXOFF_RX |

                     CYGNUM_SERIAL_FLOW_XONXOFF_TX;

    if (ENOERR == change_config(ser_handle, &new_cfg))

        run_tests( ser_handle );

#endif

    // hardware flow control

#ifdef CYGOPT_IO_SERIAL_FLOW_CONTROL_HW

    CYG_TEST_INFO("Setting hardware flow control");

    new_cfg = *cfg;

    new_cfg.flags |= CYGNUM_SERIAL_FLOW_RTSCTS_RX|CYGNUM_SERIAL_FLOW_RTSCTS_TX;

    if (ENOERR == change_config(ser_handle, &new_cfg))

        run_tests( ser_handle );

    CYG_TEST_INFO("Setting DSR/DTR hardware flow control");

    new_cfg = *cfg;

    new_cfg.flags |= CYGNUM_SERIAL_FLOW_DSRDTR_RX|CYGNUM_SERIAL_FLOW_DSRDTR_TX;

    if (ENOERR == change_config(ser_handle, &new_cfg))

        run_tests( ser_handle );

#endif

    CYG_TEST_PASS_FINISH("flow1 test OK");

}

void

cyg_start(void)

{

    CYG_TEST_INIT();

    cyg_thread_create(10,                   // Priority - just a number

                      (cyg_thread_entry_t*)serial_test,         // entry

                      0,                    // 

                      "serial_thread",     // Name

                      &stack[0],            // Stack

                      CYGNUM_HAL_STACK_SIZE_TYPICAL,           // Size

                      &thread_handle,       // Handle

                      &thread_data          // Thread data structure

        );

    cyg_thread_resume(thread_handle);

    cyg_scheduler_start();

}

#endif // ifndef NA_MSG

// EOF flow1.c