Subversion Repositories or1k

/* Remote debugging interface for DINK32 (PowerPC) ROM monitor for

   GDB, the GNU debugger.

   Copyright 1997 Free Software Foundation, Inc.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify

   it under the terms of the GNU General Public License as published by

   the Free Software Foundation; either version 2 of the License, or

   (at your option) any later version.

   This program is distributed in the hope that it will be useful,

   but WITHOUT ANY WARRANTY; without even the implied warranty of

   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License

   along with this program; if not, write to the Free Software

   Foundation, Inc., 59 Temple Place - Suite 330,

   Boston, MA 02111-1307, USA.  */

#include "defs.h"

#include "gdbcore.h"

#include "target.h"

#include "monitor.h"

#include "serial.h"

#include "symfile.h" /* For generic_load() */

#include "inferior.h" /* For write_pc() */

static void dink32_open PARAMS ((char *args, int from_tty));

static void

dink32_supply_register (regname, regnamelen, val, vallen)

     char *regname;

     int regnamelen;

     char *val;

     int vallen;

{

  int regno = 0;

  if (regnamelen < 2 || regnamelen > 4)

    return;

  switch (regname[0])

    {

    case 'R':

      if (regname[1] < '0' || regname[1] > '9')

        return;

      if (regnamelen == 2)

        regno = regname[1] - '0';

      else if (regnamelen == 3 && regname[2] >= '0' && regname[2] <= '9')

        regno = (regname[1] - '0') * 10 + (regname[2] - '0');

      else

        return;

      break;

    case 'F':

      if (regname[1] != 'R' || regname[2] < '0' || regname[2] > '9')

        return;

      if (regnamelen == 3)

        regno = 32 + regname[2] - '0';

      else if (regnamelen == 4 && regname[3] >= '0' && regname[3] <= '9')

        regno = 32 + (regname[2] - '0') * 10 + (regname[3] - '0');

      else

        return;

      break;

    case 'I':

      if (regnamelen != 2 || regname[1] != 'P')

        return;

      regno = 64;

      break;

    case 'M':

      if (regnamelen != 3 || regname[1] != 'S' || regname[2] != 'R')

        return;

      regno = 65;

      break;

    case 'C':

      if (regnamelen != 2 || regname[1] != 'R')

        return;

      regno = 66;

      break;

    case 'S':

      if (regnamelen != 4 || regname[1] != 'P' || regname[2] != 'R')

        return;

      else if (regname[3] == '8')

        regno = 67;

      else if (regname[3] == '9')

        regno = 68;

      else if (regname[3] == '1')

        regno = 69;

      else if (regname[3] == '0')

        regno = 70;

      else

        return;

      break;

    default:

      return;

    }

  monitor_supply_register (regno, val);

}

static void

dink32_load (monops, filename, from_tty)

     struct monitor_ops *monops;

     char *filename;

     int from_tty;

{

  extern int inferior_pid;

  generic_load (filename, from_tty);

  /* Finally, make the PC point at the start address */

  if (exec_bfd)

    write_pc (bfd_get_start_address (exec_bfd));

  inferior_pid = 0;              /* No process now */

}

/* This array of registers needs to match the indexes used by GDB. The

   whole reason this exists is because the various ROM monitors use

   different names than GDB does, and don't support all the registers

   either.  */

static char *dink32_regnames[NUM_REGS] =

{

  "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",

  "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",

  "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",

  "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",

  "f0", "f1", "f2", "f3", "f4", "f5", "f6", "f7",

  "f8", "f9", "f10", "f11", "f12", "f13", "f14", "f15",

  "f16", "f17", "f18", "f19", "f20", "f21", "f22", "f23",

  "f24", "f25", "f26", "f27", "f28", "f29", "f30", "f31",

  "srr0", "msr", "cr", "lr", "ctr", "xer", "xer"

};

static struct target_ops dink32_ops;

static char *dink32_inits[] =

{"\r", NULL};

static struct monitor_ops dink32_cmds;

static void

dink32_open (args, from_tty)

     char *args;

     int from_tty;

{

  monitor_open (args, &dink32_cmds, from_tty);

}

void

_initialize_dink32_rom ()

{

  dink32_cmds.flags = MO_HEX_PREFIX | MO_GETMEM_NEEDS_RANGE | MO_FILL_USES_ADDR | MO_HANDLE_NL | MO_32_REGS_PAIRED | MO_SETREG_INTERACTIVE | MO_SETMEM_INTERACTIVE | MO_GETMEM_16_BOUNDARY | MO_CLR_BREAK_1_BASED | MO_SREC_ACK | MO_SREC_ACK_ROTATE;

  dink32_cmds.init = dink32_inits;

  dink32_cmds.cont = "go +\r";

  dink32_cmds.step = "tr +\r";

  dink32_cmds.set_break = "bp 0x%x\r";

  dink32_cmds.clr_break = "bp %d\r";

#if 0                           /* Would need to follow strict alignment rules.. */

  dink32_cmds.fill = "mf %x %x %x\r";

#endif

  dink32_cmds.setmem.cmdb = "mm -b %x\r";

  dink32_cmds.setmem.cmdw = "mm -w %x\r";

  dink32_cmds.setmem.cmdl = "mm %x\r";

  dink32_cmds.setmem.term = " ?  ";

  dink32_cmds.getmem.cmdb = "md %x\r";

  dink32_cmds.getmem.resp_delim = "        ";

  dink32_cmds.setreg.cmd = "rm %s\r";

  dink32_cmds.setreg.term = " ?  ";

  dink32_cmds.getreg.cmd = "rd %s\r";

  dink32_cmds.getreg.resp_delim = ": ";

  dink32_cmds.dump_registers = "rd r\r";

  dink32_cmds.register_pattern = "\\(\\w+\\) +=\\([0-9a-fA-F]+\\b\\)";

  dink32_cmds.supply_register = dink32_supply_register;

  /* S-record download, via "keyboard port".  */

  dink32_cmds.load = "dl -k\r";

  dink32_cmds.loadresp = "Set Input Port : set to Keyboard Port\r";

#if 0                           /* slow load routine not needed if S-records work... */

  dink32_cmds.load_routine = dink32_load;

#endif

  dink32_cmds.prompt = "DINK32_603 >>";

  dink32_cmds.line_term = "\r";

  dink32_cmds.target = &dink32_ops;

  dink32_cmds.stopbits = SERIAL_1_STOPBITS;

  dink32_cmds.regnames = dink32_regnames;

  dink32_cmds.magic = MONITOR_OPS_MAGIC;

  init_monitor_ops (&dink32_ops);

  dink32_ops.to_shortname = "dink32";

  dink32_ops.to_longname = "DINK32 monitor";

  dink32_ops.to_doc = "Debug using the DINK32 monitor.\n\

Specify the serial device it is connected to (e.g. /dev/ttya).";

  dink32_ops.to_open = dink32_open;

  add_target (&dink32_ops);

}