Subversion Repositories or1k

This is ./gdb.info, produced by makeinfo version 4.0 from gdb.texinfo.

INFO-DIR-SECTION Programming & development tools.

START-INFO-DIR-ENTRY

* Gdb: (gdb).                     The GNU debugger.

END-INFO-DIR-ENTRY

   This file documents the GNU debugger GDB.

   This is the Eighth Edition, March 2000, of `Debugging with GDB: the

GNU Source-Level Debugger' for GDB Version 5.0.

   Copyright (C) 1988-2000 Free Software Foundation, Inc.

   Permission is granted to make and distribute verbatim copies of this

manual provided the copyright notice and this permission notice are

preserved on all copies.

   Permission is granted to copy and distribute modified versions of

this manual under the conditions for verbatim copying, provided also

that the entire resulting derived work is distributed under the terms

of a permission notice identical to this one.

   Permission is granted to copy and distribute translations of this

manual into another language, under the above conditions for modified

versions.

File: gdb.info,  Node: Expressions,  Next: Variables,  Up: Data

Expressions

===========

   `print' and many other GDB commands accept an expression and compute

its value.  Any kind of constant, variable or operator defined by the

programming language you are using is valid in an expression in GDB.

This includes conditional expressions, function calls, casts and string

constants.  It unfortunately does not include symbols defined by

preprocessor `#define' commands.

   GDB supports array constants in expressions input by the user.  The

syntax is {ELEMENT, ELEMENT...}.  For example, you can use the command

`print {1, 2, 3}' to build up an array in memory that is `malloc'ed in

the target program.

   Because C is so widespread, most of the expressions shown in

examples in this manual are in C.  *Note Using GDB with Different

Languages: Languages, for information on how to use expressions in other

languages.

   In this section, we discuss operators that you can use in GDB

expressions regardless of your programming language.

   Casts are supported in all languages, not just in C, because it is so

useful to cast a number into a pointer in order to examine a structure

at that address in memory.

   GDB supports these operators, in addition to those common to

programming languages:

`@'

     `@' is a binary operator for treating parts of memory as arrays.

     *Note Artificial arrays: Arrays, for more information.

`::'

     `::' allows you to specify a variable in terms of the file or

     function where it is defined.  *Note Program variables: Variables.

`{TYPE} ADDR'

     Refers to an object of type TYPE stored at address ADDR in memory.

     ADDR may be any expression whose value is an integer or pointer

     (but parentheses are required around binary operators, just as in

     a cast).  This construct is allowed regardless of what kind of

     data is normally supposed to reside at ADDR.

File: gdb.info,  Node: Variables,  Next: Arrays,  Prev: Expressions,  Up: Data

Program variables

=================

   The most common kind of expression to use is the name of a variable

in your program.

   Variables in expressions are understood in the selected stack frame

(*note Selecting a frame: Selection.); they must be either:

   * global (or file-static)

or

   * visible according to the scope rules of the programming language

     from the point of execution in that frame

This means that in the function

     foo (a)

          int a;

     {

       bar (a);

       {

         int b = test ();

         bar (b);

       }

     }

you can examine and use the variable `a' whenever your program is

executing within the function `foo', but you can only use or examine

the variable `b' while your program is executing inside the block where

`b' is declared.

   There is an exception: you can refer to a variable or function whose

scope is a single source file even if the current execution point is not

in this file.  But it is possible to have more than one such variable or

function with the same name (in different source files).  If that

happens, referring to that name has unpredictable effects.  If you wish,

you can specify a static variable in a particular function or file,

using the colon-colon notation:

     FILE::VARIABLE

     FUNCTION::VARIABLE

Here FILE or FUNCTION is the name of the context for the static

VARIABLE.  In the case of file names, you can use quotes to make sure

GDB parses the file name as a single word--for example, to print a

global value of `x' defined in `f2.c':

     (gdb) p 'f2.c'::x

   This use of `::' is very rarely in conflict with the very similar

use of the same notation in C++.  GDB also supports use of the C++

scope resolution operator in GDB expressions.

     _Warning:_ Occasionally, a local variable may appear to have the

     wrong value at certain points in a function--just after entry to a

     new scope, and just before exit.

   You may see this problem when you are stepping by machine

instructions.  This is because, on most machines, it takes more than

one instruction to set up a stack frame (including local variable

definitions); if you are stepping by machine instructions, variables

may appear to have the wrong values until the stack frame is completely

built.  On exit, it usually also takes more than one machine

instruction to destroy a stack frame; after you begin stepping through

that group of instructions, local variable definitions may be gone.

   This may also happen when the compiler does significant

optimizations.  To be sure of always seeing accurate values, turn off

all optimization when compiling.

   Another possible effect of compiler optimizations is to optimize

unused variables out of existence, or assign variables to registers (as

opposed to memory addresses).  Depending on the support for such cases

offered by the debug info format used by the compiler, GDB might not be

able to display values for such local variables.  If that happens, GDB

will print a message like this:

     No symbol "foo" in current context.

   To solve such problems, either recompile without optimizations, or

use a different debug info format, if the compiler supports several such

formats.  For example, GCC, the GNU C/C++ compiler usually supports the

`-gstabs' option.  `-gstabs' produces debug info in a format that is

superior to formats such as COFF.  You may be able to use DWARF-2

(`-gdwarf-2'), which is also an effective form for debug info.  See

*Note Options for Debugging Your Program or GNU CC: (gcc.info)Debugging

Options, for more information.

File: gdb.info,  Node: Arrays,  Next: Output Formats,  Prev: Variables,  Up: Data

Artificial arrays

=================

   It is often useful to print out several successive objects of the

same type in memory; a section of an array, or an array of dynamically

determined size for which only a pointer exists in the program.

   You can do this by referring to a contiguous span of memory as an

"artificial array", using the binary operator `@'.  The left operand of

`@' should be the first element of the desired array and be an

individual object.  The right operand should be the desired length of

the array.  The result is an array value whose elements are all of the

type of the left argument.  The first element is actually the left

argument; the second element comes from bytes of memory immediately

following those that hold the first element, and so on.  Here is an

example.  If a program says

     int *array = (int *) malloc (len * sizeof (int));

you can print the contents of `array' with

     p *array@len

   The left operand of `@' must reside in memory.  Array values made

with `@' in this way behave just like other arrays in terms of

subscripting, and are coerced to pointers when used in expressions.

Artificial arrays most often appear in expressions via the value history

(*note Value history: Value History.), after printing one out.

   Another way to create an artificial array is to use a cast.  This

re-interprets a value as if it were an array.  The value need not be in

memory:

     (gdb) p/x (short[2])0x12345678

     $1 = {0x1234, 0x5678}

   As a convenience, if you leave the array length out (as in

`(TYPE[])VALUE') GDB calculates the size to fill the value (as

`sizeof(VALUE)/sizeof(TYPE)':

     (gdb) p/x (short[])0x12345678

     $2 = {0x1234, 0x5678}

   Sometimes the artificial array mechanism is not quite enough; in

moderately complex data structures, the elements of interest may not

actually be adjacent--for example, if you are interested in the values

of pointers in an array.  One useful work-around in this situation is

to use a convenience variable (*note Convenience variables: Convenience

Vars.) as a counter in an expression that prints the first interesting

value, and then repeat that expression via .  For instance,

suppose you have an array `dtab' of pointers to structures, and you are

interested in the values of a field `fv' in each structure.  Here is an

example of what you might type:

     set $i = 0

     p dtab[$i++]->fv

     ...

File: gdb.info,  Node: Output Formats,  Next: Memory,  Prev: Arrays,  Up: Data

Output formats

==============

   By default, GDB prints a value according to its data type.  Sometimes

this is not what you want.  For example, you might want to print a

number in hex, or a pointer in decimal.  Or you might want to view data

in memory at a certain address as a character string or as an

instruction.  To do these things, specify an "output format" when you

print a value.

   The simplest use of output formats is to say how to print a value

already computed.  This is done by starting the arguments of the

`print' command with a slash and a format letter.  The format letters

supported are:

`x'

     Regard the bits of the value as an integer, and print the integer

     in hexadecimal.

`d'

     Print as integer in signed decimal.

`u'

     Print as integer in unsigned decimal.

`o'

     Print as integer in octal.

`t'

     Print as integer in binary.  The letter `t' stands for "two".  (1)

`a'

     Print as an address, both absolute in hexadecimal and as an offset

     from the nearest preceding symbol.  You can use this format used

     to discover where (in what function) an unknown address is located:

          (gdb) p/a 0x54320

          $3 = 0x54320 <_initialize_vx+396>

`c'

     Regard as an integer and print it as a character constant.

`f'

     Regard the bits of the value as a floating point number and print

     using typical floating point syntax.

   For example, to print the program counter in hex (*note

Registers::), type

     p/x $pc

Note that no space is required before the slash; this is because command

names in GDB cannot contain a slash.

   To reprint the last value in the value history with a different

format, you can use the `print' command with just a format and no

expression.  For example, `p/x' reprints the last value in hex.

   ---------- Footnotes ----------

   (1) `b' cannot be used because these format letters are also used

with the `x' command, where `b' stands for "byte"; see *Note Examining

memory: Memory.

File: gdb.info,  Node: Memory,  Next: Auto Display,  Prev: Output Formats,  Up: Data

Examining memory

================

   You can use the command `x' (for "examine") to examine memory in any

of several formats, independently of your program's data types.

`x/NFU ADDR'

`x ADDR'

`x'

     Use the `x' command to examine memory.

   N, F, and U are all optional parameters that specify how much memory

to display and how to format it; ADDR is an expression giving the

address where you want to start displaying memory.  If you use defaults

for NFU, you need not type the slash `/'.  Several commands set

convenient defaults for ADDR.

N, the repeat count

     The repeat count is a decimal integer; the default is 1.  It

     specifies how much memory (counting by units U) to display.

F, the display format

     The display format is one of the formats used by `print', `s'

     (null-terminated string), or `i' (machine instruction).  The

     default is `x' (hexadecimal) initially.  The default changes each

     time you use either `x' or `print'.

U, the unit size

     The unit size is any of

    `b'

          Bytes.

    `h'

          Halfwords (two bytes).

    `w'

          Words (four bytes).  This is the initial default.

    `g'

          Giant words (eight bytes).

     Each time you specify a unit size with `x', that size becomes the

     default unit the next time you use `x'.  (For the `s' and `i'

     formats, the unit size is ignored and is normally not written.)

ADDR, starting display address

     ADDR is the address where you want GDB to begin displaying memory.

     The expression need not have a pointer value (though it may); it

     is always interpreted as an integer address of a byte of memory.

     *Note Expressions: Expressions, for more information on

     expressions.  The default for ADDR is usually just after the last

     address examined--but several other commands also set the default

     address: `info breakpoints' (to the address of the last breakpoint

     listed), `info line' (to the starting address of a line), and

     `print' (if you use it to display a value from memory).

   For example, `x/3uh 0x54320' is a request to display three halfwords

(`h') of memory, formatted as unsigned decimal integers (`u'), starting

at address `0x54320'.  `x/4xw $sp' prints the four words (`w') of

memory above the stack pointer (here, `$sp'; *note Registers:

Registers.) in hexadecimal (`x').

   Since the letters indicating unit sizes are all distinct from the

letters specifying output formats, you do not have to remember whether

unit size or format comes first; either order works.  The output

specifications `4xw' and `4wx' mean exactly the same thing.  (However,

the count N must come first; `wx4' does not work.)

   Even though the unit size U is ignored for the formats `s' and `i',

you might still want to use a count N; for example, `3i' specifies that

you want to see three machine instructions, including any operands.

The command `disassemble' gives an alternative way of inspecting

machine instructions; see *Note Source and machine code: Machine Code.

   All the defaults for the arguments to `x' are designed to make it

easy to continue scanning memory with minimal specifications each time

you use `x'.  For example, after you have inspected three machine

instructions with `x/3i ADDR', you can inspect the next seven with just

`x/7'.  If you use  to repeat the `x' command, the repeat count N

is used again; the other arguments default as for successive uses of

`x'.

   The addresses and contents printed by the `x' command are not saved

in the value history because there is often too much of them and they

would get in the way.  Instead, GDB makes these values available for

subsequent use in expressions as values of the convenience variables

`$_' and `$__'.  After an `x' command, the last address examined is

available for use in expressions in the convenience variable `$_'.  The

contents of that address, as examined, are available in the convenience

variable `$__'.

   If the `x' command has a repeat count, the address and contents saved

are from the last memory unit printed; this is not the same as the last

address printed if several units were printed on the last line of

output.

File: gdb.info,  Node: Auto Display,  Next: Print Settings,  Prev: Memory,  Up: Data

Automatic display

=================

   If you find that you want to print the value of an expression

frequently (to see how it changes), you might want to add it to the

"automatic display list" so that GDB prints its value each time your

program stops.  Each expression added to the list is given a number to

identify it; to remove an expression from the list, you specify that

number.  The automatic display looks like this:

     2: foo = 38

     3: bar[5] = (struct hack *) 0x3804

This display shows item numbers, expressions and their current values.

As with displays you request manually using `x' or `print', you can

specify the output format you prefer; in fact, `display' decides

whether to use `print' or `x' depending on how elaborate your format

specification is--it uses `x' if you specify a unit size, or one of the

two formats (`i' and `s') that are only supported by `x'; otherwise it

uses `print'.

`display EXPR'

     Add the expression EXPR to the list of expressions to display each

     time your program stops.  *Note Expressions: Expressions.

     `display' does not repeat if you press  again after using it.

`display/FMT EXPR'

     For FMT specifying only a display format and not a size or count,

     add the expression EXPR to the auto-display list but arrange to

     display it each time in the specified format FMT.  *Note Output

     formats: Output Formats.

`display/FMT ADDR'

     For FMT `i' or `s', or including a unit-size or a number of units,

     add the expression ADDR as a memory address to be examined each

     time your program stops.  Examining means in effect doing `x/FMT

     ADDR'.  *Note Examining memory: Memory.

   For example, `display/i $pc' can be helpful, to see the machine

instruction about to be executed each time execution stops (`$pc' is a

common name for the program counter; *note Registers: Registers.).

`undisplay DNUMS...'

`delete display DNUMS...'

     Remove item numbers DNUMS from the list of expressions to display.

     `undisplay' does not repeat if you press  after using it.

     (Otherwise you would just get the error `No display number ...'.)

`disable display DNUMS...'

     Disable the display of item numbers DNUMS.  A disabled display

     item is not printed automatically, but is not forgotten.  It may be

     enabled again later.

`enable display DNUMS...'

     Enable display of item numbers DNUMS.  It becomes effective once

     again in auto display of its expression, until you specify

     otherwise.

`display'

     Display the current values of the expressions on the list, just as

     is done when your program stops.

`info display'

     Print the list of expressions previously set up to display

     automatically, each one with its item number, but without showing

     the values.  This includes disabled expressions, which are marked

     as such.  It also includes expressions which would not be

     displayed right now because they refer to automatic variables not

     currently available.

   If a display expression refers to local variables, then it does not

make sense outside the lexical context for which it was set up.  Such an

expression is disabled when execution enters a context where one of its

variables is not defined.  For example, if you give the command

`display last_char' while inside a function with an argument

`last_char', GDB displays this argument while your program continues to

stop inside that function.  When it stops elsewhere--where there is no

variable `last_char'--the display is disabled automatically.  The next

time your program stops where `last_char' is meaningful, you can enable

the display expression once again.

File: gdb.info,  Node: Print Settings,  Next: Value History,  Prev: Auto Display,  Up: Data

Print settings

==============

   GDB provides the following ways to control how arrays, structures,

and symbols are printed.

These settings are useful for debugging programs in any language:

`set print address'

`set print address on'

     GDB prints memory addresses showing the location of stack traces,

     structure values, pointer values, breakpoints, and so forth, even

     when it also displays the contents of those addresses.  The default

     is `on'.  For example, this is what a stack frame display looks

     like with `set print address on':

          (gdb) f

          #0  set_quotes (lq=0x34c78 "<<", rq=0x34c88 ">>")

              at input.c:530

          530         if (lquote != def_lquote)

`set print address off'

     Do not print addresses when displaying their contents.  For

     example, this is the same stack frame displayed with `set print

     address off':

          (gdb) set print addr off

          (gdb) f

          #0  set_quotes (lq="<<", rq=">>") at input.c:530

          530         if (lquote != def_lquote)

     You can use `set print address off' to eliminate all machine

     dependent displays from the GDB interface.  For example, with

     `print address off', you should get the same text for backtraces on

     all machines--whether or not they involve pointer arguments.

`show print address'

     Show whether or not addresses are to be printed.

   When GDB prints a symbolic address, it normally prints the closest

earlier symbol plus an offset.  If that symbol does not uniquely

identify the address (for example, it is a name whose scope is a single

source file), you may need to clarify.  One way to do this is with

`info line', for example `info line *0x4537'.  Alternately, you can set

GDB to print the source file and line number when it prints a symbolic

address:

`set print symbol-filename on'

     Tell GDB to print the source file name and line number of a symbol

     in the symbolic form of an address.

`set print symbol-filename off'

     Do not print source file name and line number of a symbol.  This

     is the default.

`show print symbol-filename'

     Show whether or not GDB will print the source file name and line

     number of a symbol in the symbolic form of an address.

   Another situation where it is helpful to show symbol filenames and

line numbers is when disassembling code; GDB shows you the line number

and source file that corresponds to each instruction.

   Also, you may wish to see the symbolic form only if the address being

printed is reasonably close to the closest earlier symbol:

`set print max-symbolic-offset MAX-OFFSET'

     Tell GDB to only display the symbolic form of an address if the

     offset between the closest earlier symbol and the address is less

     than MAX-OFFSET.  The default is 0, which tells GDB to always

     print the symbolic form of an address if any symbol precedes it.

`show print max-symbolic-offset'

     Ask how large the maximum offset is that GDB prints in a symbolic

     address.

   If you have a pointer and you are not sure where it points, try `set

print symbol-filename on'.  Then you can determine the name and source

file location of the variable where it points, using `p/a POINTER'.

This interprets the address in symbolic form.  For example, here GDB

shows that a variable `ptt' points at another variable `t', defined in

`hi2.c':

     (gdb) set print symbol-filename on

     (gdb) p/a ptt

     $4 = 0xe008 

     _Warning:_ For pointers that point to a local variable, `p/a' does

     not show the symbol name and filename of the referent, even with

     the appropriate `set print' options turned on.

   Other settings control how different kinds of objects are printed:

`set print array'

`set print array on'

     Pretty print arrays.  This format is more convenient to read, but

     uses more space.  The default is off.

`set print array off'

     Return to compressed format for arrays.

`show print array'

     Show whether compressed or pretty format is selected for displaying

     arrays.

`set print elements NUMBER-OF-ELEMENTS'

     Set a limit on how many elements of an array GDB will print.  If

     GDB is printing a large array, it stops printing after it has

     printed the number of elements set by the `set print elements'

     command.  This limit also applies to the display of strings.  When

     GDB starts, this limit is set to 200.  Setting  NUMBER-OF-ELEMENTS

     to zero means that the printing is unlimited.

`show print elements'

     Display the number of elements of a large array that GDB will

     print.  If the number is 0, then the printing is unlimited.

`set print null-stop'

     Cause GDB to stop printing the characters of an array when the

     first NULL is encountered.  This is useful when large arrays

     actually contain only short strings.  The default is off.

`set print pretty on'

     Cause GDB to print structures in an indented format with one member

     per line, like this:

          $1 = {

            next = 0x0,

            flags = {

              sweet = 1,

              sour = 1

            },

            meat = 0x54 "Pork"

          }

`set print pretty off'

     Cause GDB to print structures in a compact format, like this:

          $1 = {next = 0x0, flags = {sweet = 1, sour = 1}, \

          meat = 0x54 "Pork"}

     This is the default format.

`show print pretty'

     Show which format GDB is using to print structures.

`set print sevenbit-strings on'

     Print using only seven-bit characters; if this option is set, GDB

     displays any eight-bit characters (in strings or character values)

     using the notation `\'NNN.  This setting is best if you are

     working in English (ASCII) and you use the high-order bit of

     characters as a marker or "meta" bit.

`set print sevenbit-strings off'

     Print full eight-bit characters.  This allows the use of more

     international character sets, and is the default.

`show print sevenbit-strings'

     Show whether or not GDB is printing only seven-bit characters.

`set print union on'

     Tell GDB to print unions which are contained in structures.  This

     is the default setting.

`set print union off'

     Tell GDB not to print unions which are contained in structures.

`show print union'

     Ask GDB whether or not it will print unions which are contained in

     structures.

     For example, given the declarations

          typedef enum {Tree, Bug} Species;

          typedef enum {Big_tree, Acorn, Seedling} Tree_forms;

          typedef enum {Caterpillar, Cocoon, Butterfly}

                        Bug_forms;

          struct thing {

            Species it;

            union {

              Tree_forms tree;

              Bug_forms bug;

            } form;

          };

          struct thing foo = {Tree, {Acorn}};

     with `set print union on' in effect `p foo' would print

          $1 = {it = Tree, form = {tree = Acorn, bug = Cocoon}}

     and with `set print union off' in effect it would print

          $1 = {it = Tree, form = {...}}

These settings are of interest when debugging C++ programs:

`set print demangle'

`set print demangle on'

     Print C++ names in their source form rather than in the encoded

     ("mangled") form passed to the assembler and linker for type-safe

     linkage.  The default is on.

`show print demangle'

     Show whether C++ names are printed in mangled or demangled form.

`set print asm-demangle'

`set print asm-demangle on'

     Print C++ names in their source form rather than their mangled

     form, even in assembler code printouts such as instruction

     disassemblies.  The default is off.

`show print asm-demangle'

     Show whether C++ names in assembly listings are printed in mangled

     or demangled form.

`set demangle-style STYLE'

     Choose among several encoding schemes used by different compilers

     to represent C++ names.  The choices for STYLE are currently:

    `auto'

          Allow GDB to choose a decoding style by inspecting your

          program.

    `gnu'

          Decode based on the GNU C++ compiler (`g++') encoding

          algorithm.  This is the default.

    `hp'

          Decode based on the HP ANSI C++ (`aCC') encoding algorithm.

    `lucid'

          Decode based on the Lucid C++ compiler (`lcc') encoding

          algorithm.

    `arm'

          Decode using the algorithm in the `C++ Annotated Reference

          Manual'.  *Warning:* this setting alone is not sufficient to

          allow debugging `cfront'-generated executables.  GDB would

          require further enhancement to permit that.

     If you omit STYLE, you will see a list of possible formats.

`show demangle-style'

     Display the encoding style currently in use for decoding C++

     symbols.

`set print object'

`set print object on'

     When displaying a pointer to an object, identify the _actual_

     (derived) type of the object rather than the _declared_ type, using

     the virtual function table.

`set print object off'

     Display only the declared type of objects, without reference to the

     virtual function table.  This is the default setting.

`show print object'

     Show whether actual, or declared, object types are displayed.

`set print static-members'

`set print static-members on'

     Print static members when displaying a C++ object.  The default is

     on.

`set print static-members off'

     Do not print static members when displaying a C++ object.

`show print static-members'

     Show whether C++ static members are printed, or not.

`set print vtbl'

`set print vtbl on'

     Pretty print C++ virtual function tables.  The default is off.

     (The `vtbl' commands do not work on programs compiled with the HP

     ANSI C++ compiler (`aCC').)

`set print vtbl off'

     Do not pretty print C++ virtual function tables.

`show print vtbl'

     Show whether C++ virtual function tables are pretty printed, or

     not.

File: gdb.info,  Node: Value History,  Next: Convenience Vars,  Prev: Print Settings,  Up: Data

Value history

=============

   Values printed by the `print' command are saved in the GDB "value

history".  This allows you to refer to them in other expressions.

Values are kept until the symbol table is re-read or discarded (for

example with the `file' or `symbol-file' commands).  When the symbol

table changes, the value history is discarded, since the values may

contain pointers back to the types defined in the symbol table.

   The values printed are given "history numbers" by which you can

refer to them.  These are successive integers starting with one.

`print' shows you the history number assigned to a value by printing

`$NUM = ' before the value; here NUM is the history number.

   To refer to any previous value, use `$' followed by the value's

history number.  The way `print' labels its output is designed to

remind you of this.  Just `$' refers to the most recent value in the

history, and `$$' refers to the value before that.  `$$N' refers to the

Nth value from the end; `$$2' is the value just prior to `$$', `$$1' is

equivalent to `$$', and `$$0' is equivalent to `$'.

   For example, suppose you have just printed a pointer to a structure

and want to see the contents of the structure.  It suffices to type

     p *$

   If you have a chain of structures where the component `next' points

to the next one, you can print the contents of the next one with this:

     p *$.next

You can print successive links in the chain by repeating this

command--which you can do by just typing .

   Note that the history records values, not expressions.  If the value

of `x' is 4 and you type these commands:

     print x

     set x=5

then the value recorded in the value history by the `print' command

remains 4 even though the value of `x' has changed.

`show values'

     Print the last ten values in the value history, with their item

     numbers.  This is like `p $$9' repeated ten times, except that

     `show values' does not change the history.

`show values N'

     Print ten history values centered on history item number N.

`show values +'

     Print ten history values just after the values last printed.  If

     no more values are available, `show values +' produces no display.

   Pressing  to repeat `show values N' has exactly the same effect

as `show values +'.

File: gdb.info,  Node: Convenience Vars,  Next: Registers,  Prev: Value History,  Up: Data

Convenience variables

=====================

   GDB provides "convenience variables" that you can use within GDB to

hold on to a value and refer to it later.  These variables exist

entirely within GDB; they are not part of your program, and setting a

convenience variable has no direct effect on further execution of your

program.  That is why you can use them freely.

   Convenience variables are prefixed with `$'.  Any name preceded by

`$' can be used for a convenience variable, unless it is one of the

predefined machine-specific register names (*note Registers:

Registers.).  (Value history references, in contrast, are _numbers_

preceded by `$'.  *Note Value history: Value History.)

   You can save a value in a convenience variable with an assignment

expression, just as you would set a variable in your program.  For

example:

     set $foo = *object_ptr

would save in `$foo' the value contained in the object pointed to by

`object_ptr'.

   Using a convenience variable for the first time creates it, but its

value is `void' until you assign a new value.  You can alter the value

with another assignment at any time.

   Convenience variables have no fixed types.  You can assign a

convenience variable any type of value, including structures and

arrays, even if that variable already has a value of a different type.

The convenience variable, when used as an expression, has the type of

its current value.

`show convenience'

     Print a list of convenience variables used so far, and their

     values.  Abbreviated `show conv'.

   One of the ways to use a convenience variable is as a counter to be

incremented or a pointer to be advanced.  For example, to print a field

from successive elements of an array of structures:

     set $i = 0

     print bar[$i++]->contents

Repeat that command by typing .

   Some convenience variables are created automatically by GDB and given

values likely to be useful.

`$_'

     The variable `$_' is automatically set by the `x' command to the

     last address examined (*note Examining memory: Memory.).  Other

     commands which provide a default address for `x' to examine also

     set `$_' to that address; these commands include `info line' and

     `info breakpoint'.  The type of `$_' is `void *' except when set

     by the `x' command, in which case it is a pointer to the type of

     `$__'.

`$__'

     The variable `$__' is automatically set by the `x' command to the

     value found in the last address examined.  Its type is chosen to

     match the format in which the data was printed.

`$_exitcode'

     The variable `$_exitcode' is automatically set to the exit code

     when the program being debugged terminates.

   On HP-UX systems, if you refer to a function or variable name that

begins with a dollar sign, GDB searches for a user or system name

first, before it searches for a convenience variable.

File: gdb.info,  Node: Registers,  Next: Floating Point Hardware,  Prev: Convenience Vars,  Up: Data

Registers

=========

   You can refer to machine register contents, in expressions, as

variables with names starting with `$'.  The names of registers are

different for each machine; use `info registers' to see the names used

on your machine.

`info registers'

     Print the names and values of all registers except floating-point

     registers (in the selected stack frame).

`info all-registers'

     Print the names and values of all registers, including

     floating-point registers.

`info registers REGNAME ...'

     Print the "relativized" value of each specified register REGNAME.

     As discussed in detail below, register values are normally

     relative to the selected stack frame.  REGNAME may be any register

     name valid on the machine you are using, with or without the

     initial `$'.

   GDB has four "standard" register names that are available (in

expressions) on most machines--whenever they do not conflict with an

architecture's canonical mnemonics for registers.  The register names

`$pc' and `$sp' are used for the program counter register and the stack

pointer.  `$fp' is used for a register that contains a pointer to the