OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [monitor.h] - Blame information for rev 1765

Details | Compare with Previous | View Log

Line No. Rev Author Line
1 104 markom
/* Definitions for remote debugging interface for ROM monitors.
2
   Copyright 1990, 1991, 1992, 1996 Free Software Foundation, Inc.
3
   Contributed by Cygnus Support. Written by Rob Savoye for Cygnus.
4
 
5
   This file is part of GDB.
6
 
7
   This program is free software; you can redistribute it and/or modify
8
   it under the terms of the GNU General Public License as published by
9
   the Free Software Foundation; either version 2 of the License, or
10
   (at your option) any later version.
11
 
12
   This program is distributed in the hope that it will be useful,
13
   but WITHOUT ANY WARRANTY; without even the implied warranty of
14
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15
   GNU General Public License for more details.
16
 
17
   You should have received a copy of the GNU General Public License
18
   along with this program; if not, write to the Free Software
19
   Foundation, Inc., 59 Temple Place - Suite 330,
20
   Boston, MA 02111-1307, USA.
21
 */
22
 
23
#include "serial.h"
24
 
25
/* This structure describes the strings necessary to give small command
26
   sequences to the monitor, and parse the response.
27
 
28
   CMD is the actual command typed at the monitor.  Usually this has
29
   embedded sequences ala printf, which are substituted with the
30
   arguments appropriate to that type of command.  Ie: to examine a
31
   register, we substitute the register name for the first arg.  To
32
   modify memory, we substitute the memory location and the new
33
   contents for the first and second args, etc...
34
 
35
   RESP_DELIM used to home in on the response string, and is used to
36
   disambiguate the answer within the pile of text returned by the
37
   monitor.  This should be a unique string that immediately precedes
38
   the answer.  Ie: if your monitor prints out `PC: 00000001= ' in
39
   response to asking for the PC, you should use `: ' as the
40
   RESP_DELIM.  RESP_DELIM may be NULL if the res- ponse is going to
41
   be ignored, or has no particular leading text.
42
 
43
   TERM is the string that the monitor outputs to indicate that it is
44
   idle, and waiting for input.  This is usually a prompt of some
45
   sort.  In the previous example, it would be `= '.  It is important
46
   that TERM really means that the monitor is idle, otherwise GDB may
47
   try to type at it when it isn't ready for input.  This is a problem
48
   because many monitors cannot deal with type-ahead.  TERM may be
49
   NULL if the normal prompt is output.
50
 
51
   TERM_CMD is used to quit out of the subcommand mode and get back to
52
   the main prompt.  TERM_CMD may be NULL if it isn't necessary.  It
53
   will also be ignored if TERM is NULL.  */
54
 
55
struct memrw_cmd
56
  {
57
    char *cmdb;                 /* Command to send for byte read/write */
58
    char *cmdw;                 /* Command for word (16 bit) read/write */
59
    char *cmdl;                 /* Command for long (32 bit) read/write */
60
    char *cmdll;                /* Command for long long (64 bit) read/write */
61
    char *resp_delim;           /* String just prior to the desired value */
62
    char *term;                 /* Terminating string to search for */
63
    char *term_cmd;             /* String to get out of sub-mode (if necessary) */
64
  };
65
 
66
struct regrw_cmd
67
  {
68
    char *cmd;                  /* Command to send for reg read/write */
69
    char *resp_delim;           /* String (actually a regexp if getmem) just
70
                                   prior to the desired value */
71
    char *term;                 /* Terminating string to search for */
72
    char *term_cmd;             /* String to get out of sub-mode (if necessary) */
73
  };
74
 
75
struct monitor_ops
76
  {
77
    int flags;                  /* See below */
78
    char **init;                /* List of init commands.  NULL terminated. */
79
    char *cont;                 /* continue command */
80
    char *step;                 /* single step */
81
    char *stop;                 /* Interrupt program string */
82
    char *set_break;            /* set a breakpoint. If NULL, monitor implementation
83
                                   sets its own to_insert_breakpoint method. */
84
    char *clr_break;            /* clear a breakpoint */
85
    char *clr_all_break;        /* Clear all breakpoints */
86
    char *fill;                 /* Memory fill cmd (addr len val) */
87
    struct memrw_cmd setmem;    /* set memory to a value */
88
    struct memrw_cmd getmem;    /* display memory */
89
    struct regrw_cmd setreg;    /* set a register */
90
    struct regrw_cmd getreg;    /* get a register */
91
    /* Some commands can dump a bunch of registers
92
       at once.  This comes as a set of REG=VAL
93
       pairs.  This should be called for each pair
94
       of registers that we can parse to supply
95
       GDB with the value of a register.  */
96
    char *dump_registers;       /* Command to dump all regs at once */
97
    char *register_pattern;     /* Pattern that picks out register from reg dump */
98
    void (*supply_register) PARAMS ((char *name, int namelen,
99
                                     char *val, int vallen));
100
    void (*load_routine) PARAMS ((serial_t desc, char *file,
101
                                  int hashmark));       /* Download routine */
102
    int (*dumpregs) PARAMS ((void));    /* routine to dump all registers */
103
    int (*continue_hook) PARAMS ((void));       /* Emit the continue command */
104
    int (*wait_filter) PARAMS ((char *buf,      /* Maybe contains registers */
105
                                int bufmax,
106
                                int *response_length,
107
                                struct target_waitstatus * status));
108
    char *load;                 /* load command */
109
    char *loadresp;             /* Response to load command */
110
    char *prompt;               /* monitor command prompt */
111
    char *line_term;            /* end-of-command delimitor */
112
    char *cmd_end;              /* optional command terminator */
113
    struct target_ops *target;  /* target operations */
114
    int stopbits;               /* number of stop bits */
115
    char **regnames;            /* array of register names in ascii */
116
    int num_breakpoints;        /* If set_break != NULL, number of supported
117
                                   breakpoints */
118
    int magic;                  /* Check value */
119
  };
120
 
121
/* The monitor ops magic number, used to detect if an ops structure doesn't
122
   have the right number of entries filled in. */
123
 
124
#define MONITOR_OPS_MAGIC 600925
125
 
126
/* Flag definitions. */
127
 
128
/* If set, then clear breakpoint command uses address, otherwise it
129
   uses an index returned by the monitor.  */
130
 
131
#define MO_CLR_BREAK_USES_ADDR 0x1
132
 
133
/* If set, then memory fill command uses STARTADDR, ENDADDR+1, VALUE
134
   as args, else it uses STARTADDR, LENGTH, VALUE as args. */
135
 
136
#define MO_FILL_USES_ADDR 0x2
137
 
138
/* If set, then monitor doesn't automatically supply register dump
139
   when coming back after a continue.  */
140
 
141
#define MO_NEED_REGDUMP_AFTER_CONT 0x4
142
 
143
/* getmem needs start addr and end addr */
144
 
145
#define MO_GETMEM_NEEDS_RANGE 0x8
146
 
147
/* getmem can only read one loc at a time */
148
 
149
#define MO_GETMEM_READ_SINGLE 0x10
150
 
151
/* handle \r\n combinations */
152
 
153
#define MO_HANDLE_NL 0x20
154
 
155
/* don't expect echos in monitor_open */
156
 
157
#define MO_NO_ECHO_ON_OPEN 0x40
158
 
159
/* If set, send break to stop monitor */
160
 
161
#define MO_SEND_BREAK_ON_STOP 0x80
162
 
163
/* If set, target sends an ACK after each S-record */
164
 
165
#define MO_SREC_ACK 0x100
166
 
167
/* Allow 0x prefix on addresses retured from monitor */
168
 
169
#define MO_HEX_PREFIX 0x200
170
 
171
/* Some monitors require a different command when starting a program */
172
 
173
#define MO_RUN_FIRST_TIME 0x400
174
 
175
/* Don't expect echos when getting memory */
176
 
177
#define MO_NO_ECHO_ON_SETMEM 0x800
178
 
179
/* If set, then register store command expects value BEFORE regname */
180
 
181
#define MO_REGISTER_VALUE_FIRST 0x1000
182
 
183
/* If set, then the monitor displays registers as pairs.  */
184
 
185
#define MO_32_REGS_PAIRED 0x2000
186
 
187
/* If set, then register setting happens interactively.  */
188
 
189
#define MO_SETREG_INTERACTIVE 0x4000
190
 
191
/* If set, then memory setting happens interactively.  */
192
 
193
#define MO_SETMEM_INTERACTIVE 0x8000
194
 
195
/* If set, then memory dumps are always on 16-byte boundaries, even
196
   when less is desired.  */
197
 
198
#define MO_GETMEM_16_BOUNDARY 0x10000
199
 
200
/* If set, then the monitor numbers its breakpoints starting from 1.  */
201
 
202
#define MO_CLR_BREAK_1_BASED 0x20000
203
 
204
/* If set, then the monitor acks srecords with a plus sign.  */
205
 
206
#define MO_SREC_ACK_PLUS 0x40000
207
 
208
/* If set, then the monitor "acks" srecords with rotating lines.  */
209
 
210
#define MO_SREC_ACK_ROTATE 0x80000
211
 
212
/* If set, then remove useless address bits from memory addresses.  */
213
 
214
#define MO_ADDR_BITS_REMOVE 0x100000
215
 
216
/* If set, then display target program output if prefixed by ^O.  */
217
 
218
#define MO_PRINT_PROGRAM_OUTPUT 0x200000
219
 
220
/* Some dump bytes commands align the first data with the preceeding
221
   16 byte boundary. Some print blanks and start at the exactly the
222
   requested boundary. */
223
 
224
#define MO_EXACT_DUMPADDR 0x400000
225
 
226
/* Rather entering and exiting the write memory dialog for each word byte,
227
   we can save time by transferring the whole block without exiting
228
   the memory editing mode. You only need to worry about this
229
   if you are doing memory downloading.
230
   This engages a new write function registered with dcache.
231
 */
232
#define MO_HAS_BLOCKWRITES 0x800000
233
 
234
#define SREC_SIZE 160
235
 
236
extern void monitor_open PARAMS ((char *args, struct monitor_ops * ops,
237
                                  int from_tty));
238
extern void monitor_close PARAMS ((int quitting));
239
extern char *monitor_supply_register PARAMS ((int regno, char *valstr));
240
extern int monitor_expect PARAMS ((char *prompt, char *buf, int buflen));
241
extern int monitor_expect_prompt PARAMS ((char *buf, int buflen));
242
extern void monitor_printf
243
PARAMS ((char *,...))
244
ATTR_FORMAT (printf, 1, 2);
245
     extern void monitor_printf_noecho PARAMS ((char *,...))
246
  ATTR_FORMAT (printf, 1, 2);
247
     extern void monitor_write PARAMS ((char *buf, int buflen));
248
     extern int monitor_readchar PARAMS ((void));
249
     extern char *monitor_get_dev_name PARAMS ((void));
250
     extern void init_monitor_ops PARAMS ((struct target_ops *));
251
     extern int monitor_dump_reg_block PARAMS ((char *dump_cmd));
252
     extern void flush_monitor_dcache PARAMS ((void));

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.