URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [rdi-share/] [unixcomm.h] - Blame information for rev 1765

Details | Compare with Previous | View Log


/*
 * Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.
 *
 * This software may be freely used, copied, modified, and distributed
 * provided that the above copyright notice is preserved in all copies of the
 * software.
 */
 
/* -*-C-*-
 *
 * $Revision: 1.1.1.1 $
 *     $Date: 2001-05-18 11:16:47 $
 *
 */
#ifndef angsd_unixcomm_h
#define angsd_unixcomm_h
 
#include <errno.h>
 
#if defined(BSD)
#  define ERRNO_FOR_BLOCKED_IO EWOULDBLOCK
#else
#  define ERRNO_FOR_BLOCKED_IO EAGAIN
#endif
 
/*
 *  Function: Unix_MatchValidSerialDevice
 *   Purpose: check that the serial driver/port name is valid
 *            and return the actual device name if it is.
 *
 *    Params:
 *       Input: name    Name of device going to be used
 *
 *   Returns:
 *          OK: Pointer to name of the device matched
 *       Error or unrecognised deivce: 0
 */
extern const char *Unix_MatchValidSerialDevice(const char *name);
 
/*
 *  Function: Unix_IsSerialInUse
 *   Purpose: check whether the serial port is in use
 *
 *    Params:
 *       Input: Nothing
 *
 *   Returns:
 *          OK: 0       Serial device not in use
 *       Error: -1      Serial device in use
 */
extern int Unix_IsSerialInUse(void);
 
/*
 *  Function: Unix_OpenSerial
 *   Purpose: open the serial port
 *
 *    Params:
 *       Input: name    Name of device to open
 *
 *   Returns: Unix 'open' returns
 */
extern int Unix_OpenSerial(const char *name);
 
/*
 *  Function: Unix_CloseSerial
 *   Purpose: close the serial port
 *
 *    Params:
 *       Input: Nothing
 *
 *   Returns: Nothing
 */
extern void Unix_CloseSerial(void);
 
/*
 *  Function: Unix_ReadSerial
 *   Purpose: reads a specified number of bytes (or less) from the serial port
 *
 *    Params:
 *       Input: buf     Buffer to store read bytes
 *              n       Maximum number of bytes to read
 *
 *   Returns: Unix 'read' returns
 */
extern int Unix_ReadSerial(unsigned char *buf, int n, bool block);
 
/*
 *  Function: Unix_WriteSerial
 *   Purpose: writes a specified number of bytes (or less) to the serial port
 *
 *    Params:
 *       Input: buf     Buffer to write bytes from
 *              n       Maximum number of bytes to write
 *
 *   Returns: Unix 'write' returns
 */
extern int Unix_WriteSerial(unsigned char *buf, int n);
 
/*
 *  Function: Unix_ResetSerial
 *   Purpose: resets the serial port for another operation
 *
 *    Params:
 *       Input: Nothing
 *
 *   Returns: Nothing
 */
extern void Unix_ResetSerial(void);
 
/*
 *  Function: Unix_SetSerialBaudRate
 *   Purpose: check that the serial driver/port name is valid
 *
 *    Params:
 *       Input: baudrate    termios value for baud rate
 *
 *   Returns: Nothing
 */
extern void Unix_SetSerialBaudRate(int baudrate);
 
/*
 *  Function: Unix_ioctlNonBlocking
 *   Purpose: sets the serial port to non-blocking IO
 *
 *    Params:
 *       Input: Nothing
 *
 *   Returns: Nothing
 */
extern void Unix_ioctlNonBlocking(void);
 
/*
 *  Function: Unix_IsValidParallelDevice
 *   Purpose: check whether the combined serial and parallel device specification
 *            is ok, and return the ports selected
 *
 *    Params:
 *       Input: portstring - is a string which specifies which serial
 *                           and parallel ports are to be used. Can
 *                           include s=<val> and p=<val> separated by a
 *                           comma.
 *
 *   Returns:
 *       Output: *sername  - returns the device name of the chosen serial port
 *               *parname  - returns the device name of the chosen parallel port
 *               If either of these is NULL on return then the match failed.
 */
extern void Unix_IsValidParallelDevice(
  const char *portstring, char **sername, char **parname
);
 
/*
 *  Function: Unix_IsParallelInUse
 *   Purpose: check whether the parallel port is in use
 *
 *    Params:
 *       Input: Nothing
 *
 *   Returns:
 *          OK: 0       Parallel device not in use
 *       Error: -1      Parallel device in use
 */
extern int Unix_IsParallelInUse(void);
 
/*
 *  Function: Unix_OpenParallel
 *   Purpose: open the parallel port
 *
 *    Params:
 *       Input: name    Name of device to open
 *
 *   Returns: Unix 'open' returns
 */
extern int Unix_OpenParallel(const char *name);
 
/*
 *  Function: Unix_CloseParallel
 *   Purpose: close the parallel port
 *
 *    Params:
 *       Input: Nothing
 *
 *   Returns: Nothing
 */
extern void Unix_CloseParallel(void);
 
/*
 *  Function: Unix_WriteParallel
 *   Purpose: writes a specified number of bytes (or less) to the parallel port
 *
 *    Params:
 *       Input: buf     Buffer to write bytes from
 *              n       Maximum number of bytes to write
 *
 *   Returns: Unix 'write' returns
 */
extern unsigned int Unix_WriteParallel(unsigned char *buf, int n);
 
/*
 *  Function: Unix_ResetParallel
 *   Purpose: resets the parallel port for another operation
 *
 *    Params:
 *       Input: Nothing
 *
 *   Returns: Nothing
 */
extern void Unix_ResetParallel(void);
 
#endif /* ndef angsd_unixcomm_h */
 
/* EOF unixcomm.h */

Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [gdb-5.0/] [gdb/] [rdi-share/] [unixcomm.h] - Blame information for rev 1765

Line No.	Rev	Author	Line
1	106	markom	`/*`
2			`* Copyright (C) 1995 Advanced RISC Machines Limited. All rights reserved.`
3			`*`
4			`* This software may be freely used, copied, modified, and distributed`
5			`* provided that the above copyright notice is preserved in all copies of the`
6			`* software.`
7			`*/`
8
9			`/* --C--`
10			`*`
11			`* $Revision: 1.1.1.1 $`
12			`* $Date: 2001-05-18 11:16:47 $`
13			`*`
14			`*/`
15			`#ifndef angsd_unixcomm_h`
16			`#define angsd_unixcomm_h`
17
18			`#include <errno.h>`
19
20			`#if defined(BSD)`
21			`# define ERRNO_FOR_BLOCKED_IO EWOULDBLOCK`
22			`#else`
23			`# define ERRNO_FOR_BLOCKED_IO EAGAIN`
24			`#endif`
25
26			`/*`
27			`* Function: Unix_MatchValidSerialDevice`
28			`* Purpose: check that the serial driver/port name is valid`
29			`* and return the actual device name if it is.`
30			`*`
31			`* Params:`
32			`* Input: name Name of device going to be used`
33			`*`
34			`* Returns:`
35			`* OK: Pointer to name of the device matched`
36			`* Error or unrecognised deivce: 0`
37			`*/`
38			`extern const char Unix_MatchValidSerialDevice(const char name);`
39
40			`/*`
41			`* Function: Unix_IsSerialInUse`
42			`* Purpose: check whether the serial port is in use`
43			`*`
44			`* Params:`
45			`* Input: Nothing`
46			`*`
47			`* Returns:`
48			`* OK: 0 Serial device not in use`
49			`* Error: -1 Serial device in use`
50			`*/`
51			`extern int Unix_IsSerialInUse(void);`
52
53			`/*`
54			`* Function: Unix_OpenSerial`
55			`* Purpose: open the serial port`
56			`*`
57			`* Params:`
58			`* Input: name Name of device to open`
59			`*`
60			`* Returns: Unix 'open' returns`
61			`*/`
62			`extern int Unix_OpenSerial(const char *name);`
63
64			`/*`
65			`* Function: Unix_CloseSerial`
66			`* Purpose: close the serial port`
67			`*`
68			`* Params:`
69			`* Input: Nothing`
70			`*`
71			`* Returns: Nothing`
72			`*/`
73			`extern void Unix_CloseSerial(void);`
74
75			`/*`
76			`* Function: Unix_ReadSerial`
77			`* Purpose: reads a specified number of bytes (or less) from the serial port`
78			`*`
79			`* Params:`
80			`* Input: buf Buffer to store read bytes`
81			`* n Maximum number of bytes to read`
82			`*`
83			`* Returns: Unix 'read' returns`
84			`*/`
85			`extern int Unix_ReadSerial(unsigned char *buf, int n, bool block);`
86
87			`/*`
88			`* Function: Unix_WriteSerial`
89			`* Purpose: writes a specified number of bytes (or less) to the serial port`
90			`*`
91			`* Params:`
92			`* Input: buf Buffer to write bytes from`
93			`* n Maximum number of bytes to write`
94			`*`
95			`* Returns: Unix 'write' returns`
96			`*/`
97			`extern int Unix_WriteSerial(unsigned char *buf, int n);`
98
99			`/*`
100			`* Function: Unix_ResetSerial`
101			`* Purpose: resets the serial port for another operation`
102			`*`
103			`* Params:`
104			`* Input: Nothing`
105			`*`
106			`* Returns: Nothing`
107			`*/`
108			`extern void Unix_ResetSerial(void);`
109
110			`/*`
111			`* Function: Unix_SetSerialBaudRate`
112			`* Purpose: check that the serial driver/port name is valid`
113			`*`
114			`* Params:`
115			`* Input: baudrate termios value for baud rate`
116			`*`
117			`* Returns: Nothing`
118			`*/`
119			`extern void Unix_SetSerialBaudRate(int baudrate);`
120
121			`/*`
122			`* Function: Unix_ioctlNonBlocking`
123			`* Purpose: sets the serial port to non-blocking IO`
124			`*`
125			`* Params:`
126			`* Input: Nothing`
127			`*`
128			`* Returns: Nothing`
129			`*/`
130			`extern void Unix_ioctlNonBlocking(void);`
131
132			`/*`
133			`* Function: Unix_IsValidParallelDevice`
134			`* Purpose: check whether the combined serial and parallel device specification`
135			`* is ok, and return the ports selected`
136			`*`
137			`* Params:`
138			`* Input: portstring - is a string which specifies which serial`
139			`* and parallel ports are to be used. Can`
140			`* include s=<val> and p=<val> separated by a`
141			`* comma.`
142			`*`
143			`* Returns:`
144			`* Output: *sername - returns the device name of the chosen serial port`
145			`* *parname - returns the device name of the chosen parallel port`
146			`* If either of these is NULL on return then the match failed.`
147			`*/`
148			`extern void Unix_IsValidParallelDevice(`
149			`const char portstring, char sername, char *parname`
150			`);`
151
152			`/*`
153			`* Function: Unix_IsParallelInUse`
154			`* Purpose: check whether the parallel port is in use`
155			`*`
156			`* Params:`
157			`* Input: Nothing`
158			`*`
159			`* Returns:`
160			`* OK: 0 Parallel device not in use`
161			`* Error: -1 Parallel device in use`
162			`*/`
163			`extern int Unix_IsParallelInUse(void);`
164
165			`/*`
166			`* Function: Unix_OpenParallel`
167			`* Purpose: open the parallel port`
168			`*`
169			`* Params:`
170			`* Input: name Name of device to open`
171			`*`
172			`* Returns: Unix 'open' returns`
173			`*/`
174			`extern int Unix_OpenParallel(const char *name);`
175
176			`/*`
177			`* Function: Unix_CloseParallel`
178			`* Purpose: close the parallel port`
179			`*`
180			`* Params:`
181			`* Input: Nothing`
182			`*`
183			`* Returns: Nothing`
184			`*/`
185			`extern void Unix_CloseParallel(void);`
186
187			`/*`
188			`* Function: Unix_WriteParallel`
189			`* Purpose: writes a specified number of bytes (or less) to the parallel port`
190			`*`
191			`* Params:`
192			`* Input: buf Buffer to write bytes from`
193			`* n Maximum number of bytes to write`
194			`*`
195			`* Returns: Unix 'write' returns`
196			`*/`
197			`extern unsigned int Unix_WriteParallel(unsigned char *buf, int n);`
198
199			`/*`
200			`* Function: Unix_ResetParallel`
201			`* Purpose: resets the parallel port for another operation`
202			`*`
203			`* Params:`
204			`* Input: Nothing`
205			`*`
206			`* Returns: Nothing`
207			`*/`
208			`extern void Unix_ResetParallel(void);`
209
210			`#endif /* ndef angsd_unixcomm_h */`
211
212			`/* EOF unixcomm.h */`