| 1 |
1181 |
sfurman |
2002-08-13 Stephane Carrez
|
| 2 |
|
|
|
| 3 |
|
|
* dv-m68hc11eepr.c (struct m68hc11eepr ): Use const char* for filename.
|
| 4 |
|
|
|
| 5 |
|
|
2002-08-13 Marko Kohtala
|
| 6 |
|
|
|
| 7 |
|
|
* interp.c (sim_prepare_for_program): Look up the image for the
|
| 8 |
|
|
reset vector and set cpu_use_elf_start to 1 if not found.
|
| 9 |
|
|
(sim_open): Do not set cpu_use_elf_start.
|
| 10 |
|
|
|
| 11 |
|
|
2002-08-13 Marko Kohtala
|
| 12 |
|
|
|
| 13 |
|
|
* interp.c (sim_hw_configure): Return 1 for success.
|
| 14 |
|
|
(sim_prepare_for_program): Use the sim_hw_configure exit code to
|
| 15 |
|
|
return SIM_RC_FAIL.
|
| 16 |
|
|
|
| 17 |
|
|
2002-08-13 Stephane Carrez
|
| 18 |
|
|
|
| 19 |
|
|
* dv-m68hc11.c (m68hc11cpu_io_read_buffer): Translate memory
|
| 20 |
|
|
bank window to some virtual address to read from extended memory.
|
| 21 |
|
|
(m68hc11cpu_io_write_buffer): Likewise for writing.
|
| 22 |
|
|
(attach_m68hc11_regs): When use_bank property is defined, attach
|
| 23 |
|
|
to the 68HC12 16K memory bank window.
|
| 24 |
|
|
* interp.c (sim_hw_configure): Create memory region for banked
|
| 25 |
|
|
memory.
|
| 26 |
|
|
|
| 27 |
|
|
2002-08-13 Stephane Carrez
|
| 28 |
|
|
|
| 29 |
|
|
* interp.c (sim_hw_configure): Connect port-X to cpu-write-port.
|
| 30 |
|
|
* dv-m68hc11.c (m68hc11cpu_ports): Add cpu-write-port input.
|
| 31 |
|
|
(m68hc11cpu_port_event): Handle CPU_WRITE_PORT event.
|
| 32 |
|
|
|
| 33 |
|
|
2002-08-13 Marko Kohtala
|
| 34 |
|
|
|
| 35 |
|
|
* dv-m68hc11.c (m68hc11cpu_io_write): Fix to update IO mapping
|
| 36 |
|
|
when IO mapping changed, not when internal RAM mapping is changed.
|
| 37 |
|
|
|
| 38 |
|
|
2002-08-13 Stephane Carrez
|
| 39 |
|
|
|
| 40 |
|
|
* m68hc11_sim.c (cpu_special): Handle call and rtc instructions.
|
| 41 |
|
|
* sim-main.h (M6812_CALL_INDIRECT): Add to enum.
|
| 42 |
|
|
(m6811_regs): Add page register.
|
| 43 |
|
|
(cpu_set_page, cpu_get_page): New macros.
|
| 44 |
|
|
(phys_to_virt): New function.
|
| 45 |
|
|
(cpu_get_indexed_operand_addr, cpu_return): Declare.
|
| 46 |
|
|
* gencode.c: Identify indirect addressing mode for call and fix daa.
|
| 47 |
|
|
(gen_function_entry): New param to tell if src8/dst8 locals are
|
| 48 |
|
|
necessary.
|
| 49 |
|
|
(gen_interpreter): Use it to avoid generation of unused variables.
|
| 50 |
|
|
* interp.c (sim_fetch_register): Allow to read page register; page
|
| 51 |
|
|
register, A, B and CCR are only 1 byte wide.
|
| 52 |
|
|
(sim_store_register): Likewise for writing.
|
| 53 |
|
|
|
| 54 |
|
|
2002-06-16 Andrew Cagney
|
| 55 |
|
|
|
| 56 |
|
|
* configure: Regenerated to track ../common/aclocal.m4 changes.
|
| 57 |
|
|
|
| 58 |
|
|
2002-06-09 Andrew Cagney
|
| 59 |
|
|
|
| 60 |
|
|
* Makefile.in (INCLUDE): Update path to callback.h.
|
| 61 |
|
|
* sim-main.h: Include "gdb/callback.h" and "gdb/remote-sim.h".
|
| 62 |
|
|
|
| 63 |
|
|
2002-03-07 Stephane Carrez
|
| 64 |
|
|
|
| 65 |
|
|
* m68hc11_sim.c (cpu_move8): Call sim_engine_abort in default case.
|
| 66 |
|
|
(cpu_move16): Likewise.
|
| 67 |
|
|
(sim_memory_error): Use sim_io_printf.
|
| 68 |
|
|
(cpu_option_handler): Fix compilation warning.
|
| 69 |
|
|
* interp.c (sim_hw_configure): Fix compilation warning;
|
| 70 |
|
|
remove m68hc12sio@2 device.
|
| 71 |
|
|
(sim_open): Likewise.
|
| 72 |
|
|
* dv-m68hc11tim.c (m68hc11tim_port_event): Fix clear of TFLG2
|
| 73 |
|
|
flags when reset.
|
| 74 |
|
|
(cycle_to_string): Improve convertion of cpu cycle number.
|
| 75 |
|
|
(m68hc11tim_info): Print info about PACNT.
|
| 76 |
|
|
(m68hc11tim_io_write_buffer): Fix clearing of TFLG2; handle
|
| 77 |
|
|
TCTL1 and TCTL2 registers.
|
| 78 |
|
|
* dv-m68hc11.c (m68hc11_info): Print 6811 current running mode.
|
| 79 |
|
|
|
| 80 |
|
|
2002-03-07 Stephane Carrez
|
| 81 |
|
|
|
| 82 |
|
|
* interp.c (sim_hw_configure): Save the HW cpu pointer in the
|
| 83 |
|
|
cpu struct.
|
| 84 |
|
|
(sim_hw_configure): Connect the capture input/output events.
|
| 85 |
|
|
* sim-main.h (_sim_cpu): New member hw_cpu.
|
| 86 |
|
|
(m68hc11cpu_set_oscillator): Declare.
|
| 87 |
|
|
(m68hc11cpu_clear_oscillator): Declare.
|
| 88 |
|
|
(m68hc11cpu_set_port): Declare.
|
| 89 |
|
|
* dv-m68hc11.c (m68hc11_options): New for oscillator commands.
|
| 90 |
|
|
(m68hc11cpu_ports): New input ports and output ports to reflect
|
| 91 |
|
|
the HC11 IOs.
|
| 92 |
|
|
(m68hc11_delete): Cleanup any running oscillator.
|
| 93 |
|
|
(attach_m68hc11_regs): Create the input oscillators.
|
| 94 |
|
|
(make_oscillator): New function.
|
| 95 |
|
|
(find_oscillator): New function.
|
| 96 |
|
|
(oscillator_handler): New function.
|
| 97 |
|
|
(reset_oscillators): New function.
|
| 98 |
|
|
(m68hc11cpu_port_event): Handle the new input ports.
|
| 99 |
|
|
(m68hc11cpu_set_oscillator): New function.
|
| 100 |
|
|
(m68hc11cpu_clear_oscillator): New function.
|
| 101 |
|
|
(get_frequency): New function.
|
| 102 |
|
|
(m68hc11_option_handler): New function.
|
| 103 |
|
|
(m68hc11cpu_set_port): New function.
|
| 104 |
|
|
(m68hc11cpu_io_write): Post the port output events.
|
| 105 |
|
|
* dv-m68hc11spi.c (set_bit_port): Use m68hc11cpu_set_port to set
|
| 106 |
|
|
the output port value.
|
| 107 |
|
|
* dv-m68hc11tim.c (m68hc11tim_port_event): Handle CAPTURE event
|
| 108 |
|
|
by latching the TCNT value in the register.
|
| 109 |
|
|
|
| 110 |
|
|
2002-03-07 Stephane Carrez
|
| 111 |
|
|
|
| 112 |
|
|
* sim-main.h (cpu_frame, cpu_frame_list): Remove.
|
| 113 |
|
|
(cpu_frame_reg, cpu_print_frame): Remove.
|
| 114 |
|
|
(cpu_m68hc11_push_uint8, cpu_m68hc11_pop_uint8): Cleanup.
|
| 115 |
|
|
(cpu_m68hc11_push_uint16, cpu_m68hc11_pop_uint16): Likewise.
|
| 116 |
|
|
(cpu_m68hc12_push_uint8, cpu_m68hc12_push_uint16): Likewise.
|
| 117 |
|
|
(cpu_m68hc12_pop_uint8, cpu_m68hc12_pop_uint16): Likewise.
|
| 118 |
|
|
* m68hc11_sim.c (cpu_find_frame): Remove.
|
| 119 |
|
|
(cpu_create_frame_list): Remove.
|
| 120 |
|
|
(cpu_remove_frame_list, cpu_create_frame, cpu_free_frame): Remove.
|
| 121 |
|
|
(cpu_frame_reg, cpu_print_frame, cpu_update_frame): Remove.
|
| 122 |
|
|
(cpu_call): Cleanup to remove #if HAVE_FRAME and calls to the above.
|
| 123 |
|
|
(cpu_update_frame): Likewise.
|
| 124 |
|
|
(cpu_return): Likewise.
|
| 125 |
|
|
(cpu_reset): Likewise.
|
| 126 |
|
|
(cpu_initialize): Likewise.
|
| 127 |
|
|
* interp.c (sim_do_command): Remove call to cpu_print_frame.
|
| 128 |
|
|
|
| 129 |
|
|
2002-03-07 Stephane Carrez
|
| 130 |
|
|
|
| 131 |
|
|
* interrupts.c (interrupts_reset): New function, setup interrupt
|
| 132 |
|
|
vector address according to cpu mode.
|
| 133 |
|
|
(interrupts_initialize): Move reset portion to the above.
|
| 134 |
|
|
(interrupt_names): New table to give a name to interrupts.
|
| 135 |
|
|
(idefs): Handle pulse accumulator interrupts.
|
| 136 |
|
|
(interrupts_info): Print the interrupt history.
|
| 137 |
|
|
(interrupt_option_handler): New function.
|
| 138 |
|
|
(interrupt_options): New table of options.
|
| 139 |
|
|
(interrupts_update_pending): Keep track of when interrupts are
|
| 140 |
|
|
raised and implement breakpoint-on-raise-interrupt.
|
| 141 |
|
|
(interrupts_process): Keep track of when interrupts are taken
|
| 142 |
|
|
and implement breakpoint-on-interrupt.
|
| 143 |
|
|
* interrupts.h (struct interrupt_history): Define.
|
| 144 |
|
|
(struct interrupt): Keep track of the interrupt history.
|
| 145 |
|
|
(interrupts_reset): Declare.
|
| 146 |
|
|
(interrupts_initialize): Update prototype.
|
| 147 |
|
|
* m68hc11_sim.c (cpu_reset): Reset interrupts.
|
| 148 |
|
|
(cpu_initialize): Cleanup.
|
| 149 |
|
|
|
| 150 |
|
|
2001-07-28 Stephane Carrez
|
| 151 |
|
|
|
| 152 |
|
|
* dv-m68hc11eepr.c (m68hc11eepr_info): Fix print of current write
|
| 153 |
|
|
address.
|
| 154 |
|
|
(m68hc11eepr_port_event): Fix detach/attach logic.
|
| 155 |
|
|
|
| 156 |
|
|
2001-07-22 Stephane Carrez
|
| 157 |
|
|
|
| 158 |
|
|
* Makefile.in (SIM_OBJS): Remove sim-resume.o
|
| 159 |
|
|
* interp.c (sim_resume): New function from sim-resume.c, install
|
| 160 |
|
|
the stepping event after having processed the pending ticks.
|
| 161 |
|
|
(has_stepped): Likewise.
|
| 162 |
|
|
(sim_info): Produce an output only if verbose or STATE_VERBOSE_P.
|
| 163 |
|
|
|
| 164 |
|
|
2001-07-10 Andrew Cagney
|
| 165 |
|
|
|
| 166 |
|
|
* Makefile.in (gencode): Provide explicit path to gencode.c.
|
| 167 |
|
|
|
| 168 |
|
|
2001-05-20 Stephane Carrez
|
| 169 |
|
|
|
| 170 |
|
|
* Makefile.in (M68HC11_OBJS): Add m68hc12int.o.
|
| 171 |
|
|
(m68hc12int.c): Generate using gencode -m6812.
|
| 172 |
|
|
(m68hc11int.c): Likewise with -m6811.
|
| 173 |
|
|
|
| 174 |
|
|
* gencode.c (m6811_opcode_patterns): New patterns for 68HC12.
|
| 175 |
|
|
(m6811_page1_opcodes): Remove duplicate entries.
|
| 176 |
|
|
(m6811_page2_opcodes): Likewise.
|
| 177 |
|
|
(m6811_page3_opcodes): Likewise.
|
| 178 |
|
|
(m6811_page4_opcodes): Likewise.
|
| 179 |
|
|
(m6812_page1_opcodes): New table for 68HC12 instructions.
|
| 180 |
|
|
(m6812_page2_opcodes): Likewise.
|
| 181 |
|
|
(gen_fetch_operands): New modes [] and &[] for 68HC12 operands.
|
| 182 |
|
|
(gen_save_result): Likewise.
|
| 183 |
|
|
(gen_interpreter_for_table): Handle 68HC11 and 68HC12 opcodes.
|
| 184 |
|
|
(cmp_opcode): New function for opcode comparision.
|
| 185 |
|
|
(prepare_table): Sort the opcodes.
|
| 186 |
|
|
(gen_interpreter): Prepare all the tables and generate either
|
| 187 |
|
|
a 68HC11 or a 68HC12 simulator.
|
| 188 |
|
|
(main): New options -m6811 and -m6812.
|
| 189 |
|
|
|
| 190 |
|
|
* m68hc11_sim.c (cpu_single_step): Use pointer to cpu interpretor.
|
| 191 |
|
|
(cpu_special): Simulation of some 68HC12 instructions.
|
| 192 |
|
|
(cpu_exg): New function.
|
| 193 |
|
|
(cpu_dbcc): Likewise.
|
| 194 |
|
|
(cpu_fetch_relbranch16): Likewise.
|
| 195 |
|
|
(cpu_push_all): Push according to 68HC11 or 68HC12.
|
| 196 |
|
|
(cpu_move16): Likewise.
|
| 197 |
|
|
(cpu_move8): Likewise.
|
| 198 |
|
|
(cpu_get_indexed_operand16): Likewise.
|
| 199 |
|
|
(cpu_get_indexed_operand8): Likewise.
|
| 200 |
|
|
(cpu_get_indexed_operand_addr): Likewise.
|
| 201 |
|
|
(cpu_set_reg, cpu_set_dst_reg, cpu_get_src_reg, cpu_get_reg): Likewise.
|
| 202 |
|
|
(cpu_reset): Setup INIT register according to architecture.
|
| 203 |
|
|
|
| 204 |
|
|
* sim-main.h (M6811_Special): Add 68HC12 specific instructions.
|
| 205 |
|
|
(_sim_cpu): Keep track of the cpu being simulated.
|
| 206 |
|
|
(cpu_get_tmp3, cpu_get_tmp2, cpu_set_tmp3, cpu_set_tmp2): New.
|
| 207 |
|
|
(cpu_m68hc11_push_uintxx): Rename of cpu_push_uintxx.
|
| 208 |
|
|
(cpu_m68hc11_pop_uint8): Likewise.
|
| 209 |
|
|
(cpu_m68hc12_push_uintxx): New functions for 68HC12.
|
| 210 |
|
|
(cpu_m68hc12_pop_uintxx): Likewise.
|
| 211 |
|
|
(cpu_exg, cpu_dbcc, cpu_move8, cpu_move16): Likewise,
|
| 212 |
|
|
(cpu_fetch_relbranch16): Likewise.
|
| 213 |
|
|
(cpu_interp_m6811): Rename of cpu_interp.
|
| 214 |
|
|
(cpu_interp_m6812): New function.
|
| 215 |
|
|
* interp.c (free_state): New function.
|
| 216 |
|
|
(dev_list_68hc12): New table.
|
| 217 |
|
|
(sim_board_reset): Reset depending on the cpu (HC11 or HC12).
|
| 218 |
|
|
(sim_hw_configure): New function.
|
| 219 |
|
|
(sim_prepare_for_program): New function.
|
| 220 |
|
|
(sim_open): Use above new functions.
|
| 221 |
|
|
(sim_close): Call free_state().
|
| 222 |
|
|
(sim_info): Print info according to cpu.
|
| 223 |
|
|
(sim_create_inferior): Use sim_prepare_for_program.
|
| 224 |
|
|
(sim_do_command): Configure the hardware after a change of the
|
| 225 |
|
|
architecture.
|
| 226 |
|
|
|
| 227 |
|
|
2001-05-20 Stephane Carrez
|
| 228 |
|
|
|
| 229 |
|
|
* dv-m68hc11sio.c (m68hc11sio_tx_poll): Always check for
|
| 230 |
|
|
pending interrupts.
|
| 231 |
|
|
* interrupts.c (interrupts_process): Keep track of the last number
|
| 232 |
|
|
of masked insn cycles.
|
| 233 |
|
|
(interrupts_initialize): Clear last number of masked insn cycles.
|
| 234 |
|
|
(interrupts_info): Report them.
|
| 235 |
|
|
(interrupts_update_pending): Compute clear and set masks of
|
| 236 |
|
|
interrupts and clear the interrupt bits before setting them
|
| 237 |
|
|
(due to SCI interrupt sharing).
|
| 238 |
|
|
* interrupts.h (struct interrupts): New members last_mask_cycles
|
| 239 |
|
|
and xirq_last_mask_cycles.
|
| 240 |
|
|
|
| 241 |
|
|
2000-11-26 Stephane Carrez
|
| 242 |
|
|
|
| 243 |
|
|
* dv-m68hc11.c (m68hc11cpu_io_read_buffer): Use attach_size
|
| 244 |
|
|
instead of a hard-coded value.
|
| 245 |
|
|
(m68hc11cpu_io_write_buffer): Likewise.
|
| 246 |
|
|
(dv_m68hc11_descriptor): Define a 68hc12 device.
|
| 247 |
|
|
* dv-m68hc11eepr.c (dv_m68hc11eepr_descriptor): Likewise.
|
| 248 |
|
|
* dv-m68hc11tim.c (dv_m68hc11tim_descriptor): Likewise.
|
| 249 |
|
|
* dv-m68hc11spi.c (dv_m68hc11spi_descriptor): Likewise.
|
| 250 |
|
|
* dv-m68hc11sio.c (dv_m68hc11sio_descriptor): Likewise.
|
| 251 |
|
|
|
| 252 |
|
|
2000-11-22 Stephane Carrez
|
| 253 |
|
|
|
| 254 |
|
|
* dv-m68hc11.c (attach_m68hc11_regs): Register a delete handler.
|
| 255 |
|
|
(m68hc11cpu_delete): Delete handler to detach the address space.
|
| 256 |
|
|
|
| 257 |
|
|
2000-11-24 Stephane Carrez
|
| 258 |
|
|
|
| 259 |
|
|
* dv-m68hc11eepr.c (attach_m68hc11eepr_regs): Use hw_malloc.
|
| 260 |
|
|
* dv-nvram.c (attach_nvram_regs): Use hw_free and hw_malloc
|
| 261 |
|
|
instead of free and malloc.
|
| 262 |
|
|
|
| 263 |
|
|
2000-09-11 Stephane Carrez
|
| 264 |
|
|
|
| 265 |
|
|
* Makefile.in: Was missing from initial patch.
|
| 266 |
|
|
|
| 267 |
|
|
2000-09-10 Stephane Carrez
|
| 268 |
|
|
|
| 269 |
|
|
* interp.c (sim_store_register): Remove soft register hack.
|
| 270 |
|
|
(sim_fetch_register): Likewise.
|
| 271 |
|
|
(sim_create_inferior): Likewise.
|
| 272 |
|
|
* sim-main.h: Likewise.
|
| 273 |
|
|
|
| 274 |
|
|
2000-09-10 Stephane Carrez
|
| 275 |
|
|
|
| 276 |
|
|
* interrupts.c (interrupts_update_pending): Clear the mask of
|
| 277 |
|
|
pending interrupts here.
|
| 278 |
|
|
(interrupts_get_current): Don't clear the mask of pending interrupts.
|
| 279 |
|
|
|
| 280 |
|
|
2000-09-10 Stephane Carrez
|
| 281 |
|
|
|
| 282 |
|
|
* sim-main.h: Define cycle_to_string.
|
| 283 |
|
|
* dv-m68hc11tim.c (cycle_to_string): New function to translate
|
| 284 |
|
|
the cpu cycle into some formatted time string.
|
| 285 |
|
|
(m68hc11tim_print_timer): Use it.
|
| 286 |
|
|
* dv-m68hc11sio.c (m68hc11sio_info): Use cycle_to_string.
|
| 287 |
|
|
* dv-m68hc11spi.c (m68hc11spi_info): Likewise.
|
| 288 |
|
|
* interrupts.c (interrupts_info): Likewise.
|
| 289 |
|
|
* m68hc11_sim.c (cpu_info): Likewise.
|
| 290 |
|
|
|
| 291 |
|
|
2000-09-06 Stephane Carrez
|
| 292 |
|
|
|
| 293 |
|
|
* dv-m68hc11tim.c (m68hc11tim_timer_event): Compute the overflow
|
| 294 |
|
|
interrupt and compare events accurately. Take into account the
|
| 295 |
|
|
pending ticks not processed by the simulator yet (introduced a shift).
|
| 296 |
|
|
(m68hc11_port_event): Reset the timer interrupt delays.
|
| 297 |
|
|
(m68hc11tim_io_read_buffer): Be able to read several bytes.
|
| 298 |
|
|
(m68hc11tim_io_write_buffer): Likewise for write.
|
| 299 |
|
|
(m68hc11tim_io_write_buffer): Recompute the timer overflow interrupt.
|
| 300 |
|
|
|
| 301 |
|
|
2000-09-06 Stephane Carrez
|
| 302 |
|
|
|
| 303 |
|
|
* dv-m68hc11spi.c (m68hc11spi_io_read_buffer): Clear the interrupts.
|
| 304 |
|
|
(m68hc11spi_io_write_buffer): Likewise and fix the spi frame.
|
| 305 |
|
|
(m68hc11spi_info): Clarify the status report
|
| 306 |
|
|
of the SPI when a byte is being sent.
|
| 307 |
|
|
(m68hc11spi_clock): Fix the spi send frame.
|
| 308 |
|
|
|
| 309 |
|
|
2000-08-11 Stephane Carrez
|
| 310 |
|
|
|
| 311 |
|
|
* sim-main.h (m68hc11_map_level): Define level of address mappings.
|
| 312 |
|
|
* dv-m68hc11eepr.c (struct m68hc11eepr ): New flag to indicate
|
| 313 |
|
|
whether the eeprom is currently mapped or not.
|
| 314 |
|
|
(m68hc11eepr_port_event): Use the flag to see if we must unmap
|
| 315 |
|
|
or map the eeprom. Update the flag to reflect the current state.
|
| 316 |
|
|
Use M6811_EEPROM_LEVEL when mapping the eeprom.
|
| 317 |
|
|
(m68hc11eepr_finish): Remove overlap hack.
|
| 318 |
|
|
(attach_m68hc11eepr_regs): Use M6811_IO_LEVEL when mapping the
|
| 319 |
|
|
config and control registers.
|
| 320 |
|
|
* dv-m68hc11.c (m68hc11cpu_finish): Remove overlap hack.
|
| 321 |
|
|
(attach_m68hc11_regs): Use M6811_IO_LEVEL.
|
| 322 |
|
|
(m68hc11cpu_io_write): Likewise when unmapping and re-mapping.
|
| 323 |
|
|
* dv-m68hc11spi.c (m68hc11spi_finish): Likewise.
|
| 324 |
|
|
(attach_m68hc11spi_regs): Likewise.
|
| 325 |
|
|
* dv-m68hc11tim.c (m68hc11tim_finish): Likewise.
|
| 326 |
|
|
(attach_m68hc11tim_regs): Likewise.
|
| 327 |
|
|
* dv-m68hc11sio.c (m68hc11sio_finish): Likewise.
|
| 328 |
|
|
(attach_m68hc11sio_regs): Likewise.
|
| 329 |
|
|
* interp.c (sim_open): Likewise.
|
| 330 |
|
|
* dv-nvram.c (attach_nvram_regs): Likewise.
|
| 331 |
|
|
|
| 332 |
|
|
Thu Jul 27 21:27:25 2000 Andrew Cagney
|
| 333 |
|
|
|
| 334 |
|
|
* configure, config.in: Regenerate.
|
| 335 |
|
|
|
| 336 |
|
|
2000-06-25 Stephane Carrez
|
| 337 |
|
|
|
| 338 |
|
|
* Makefile.in (SIM_RUN_OBJS): Define to use nrun.c
|
| 339 |
|
|
* dv-m68hc11.c (m68hc11cpu_finish): Register detach address callback.
|
| 340 |
|
|
(dv_m6811_detach_address_callback): New function to detach a
|
| 341 |
|
|
device from an address space.
|
| 342 |
|
|
* dv-m68hc11eepr.c (m68hc11eepr_port_event): Initialize
|
| 343 |
|
|
config register according to --cpu-config option.
|
| 344 |
|
|
* sim-main.h (_sim_cpu): Add cpu_config member.
|
| 345 |
|
|
* interp.c (sim_open): Delete specific simulator options.
|
| 346 |
|
|
* m68hc11_sim.c (cpu_option_handler): New options
|
| 347 |
|
|
--emulos and -cpu-config to configure the simulator.
|
| 348 |
|
|
(cpu_initialize): Initialize cpu_config member.
|
| 349 |
|
|
|
| 350 |
|
|
2000-06-24 Stephane Carrez
|
| 351 |
|
|
|
| 352 |
|
|
* emulos.c: Fix indentation and comments.
|
| 353 |
|
|
* gencode.c: Likewise.
|
| 354 |
|
|
* dv-m68hc11tim.c (m68hc11tim_timer_event): Handle COMPARE_EVENT.
|
| 355 |
|
|
(m68hc11tim_io_write_buffer): Write compare registers and
|
| 356 |
|
|
setup compare event.
|
| 357 |
|
|
* interp.c: Remove unused global variables.
|
| 358 |
|
|
* interrupts.c (idefs): New compare interrupts.
|
| 359 |
|
|
Fix indentation and comments.
|
| 360 |
|
|
* interrupts.h: Likewise.
|
| 361 |
|
|
|
| 362 |
|
|
2000-06-18 Stephane Carrez
|
| 363 |
|
|
|
| 364 |
|
|
* dv-m68hc11sio.c: Fix indentation and comments.
|
| 365 |
|
|
Remove INT_PORT.
|
| 366 |
|
|
* dv-m68hc11.c: Fix indentation and comments.
|
| 367 |
|
|
(m68hc11cpu_port_event): Move initialization of M6811_HPRIO from here.
|
| 368 |
|
|
* m68hc11_sim.c (cpu_reset): To here.
|
| 369 |
|
|
* dv-m68hc11eepr.c: Fix indentation and comments.
|
| 370 |
|
|
|
| 371 |
|
|
2000-06-17 Stephane Carrez
|
| 372 |
|
|
|
| 373 |
|
|
* dv-nvram.c: New file, rename from dv-pram.c.
|
| 374 |
|
|
* dv-pram.c: Delete file.
|
| 375 |
|
|
* sim-main.h: Incorporate m68hc11_sim.h.
|
| 376 |
|
|
* m68hc11_sim.h: Delete file.
|
| 377 |
|
|
* configure.in: Rename pram into nvram.
|
| 378 |
|
|
* interp.c (sim_open): Likewise in creation of device tree.
|
| 379 |
|
|
|
| 380 |
|
|
2000-05-31 Stephane Carrez
|
| 381 |
|
|
|
| 382 |
|
|
* interp.c (sim_open): Create the SPI device.
|
| 383 |
|
|
* dv-m68hc11spi.c: New file for SPI device simulation.
|
| 384 |
|
|
* configure.in (hw_extra_devices): Add SPI device.
|
| 385 |
|
|
|
| 386 |
|
|
2000-05-28 Stephane Carrez
|
| 387 |
|
|
|
| 388 |
|
|
* interrupts.c (interrupts_initialize): Clear XIRQ accounting.
|
| 389 |
|
|
(interrupts_process): Separate IRQ and XIRQ accounting.
|
| 390 |
|
|
(interrupts_info): Report XIRQ accounting.
|
| 391 |
|
|
* interrupts.h (struct interrupts): Added accounting for XIRQ.
|
| 392 |
|
|
|
| 393 |
|
|
2000-04-16 Stephane Carrez
|
| 394 |
|
|
|
| 395 |
|
|
* dv-pram.c (attach_pram_regs): Fix the 'save-modified' mode.
|
| 396 |
|
|
* m68hc11_sim.h (_sim_cpu): Allow configuration of cpu mode.
|
| 397 |
|
|
* dv-m68hc11.c (attach_m68hc11_regs): Get the cpu MODA,MODB
|
| 398 |
|
|
configuration from the 'mode' device tree property.
|
| 399 |
|
|
(m68hc11cpu_port_event): Reset M6811_HPRIO to the cpu MODA, MODB
|
| 400 |
|
|
configuration.
|
| 401 |
|
|
|
| 402 |
|
|
2000-02-24 Stephane Carrez
|
| 403 |
|
|
|
| 404 |
|
|
* sim-main.h: Remove WITH_TARGET_* defines.
|
| 405 |
|
|
* Makefile.in (SIM_EXTRA_CFLAGS): Specify the WITH_TARGET_* flags.
|
| 406 |
|
|
|
| 407 |
|
|
2000-02-08 Stephane Carrez
|
| 408 |
|
|
|
| 409 |
|
|
* dv-m68hc11sio.c (m68hc11sio_port_event): Setup the SCI to
|
| 410 |
|
|
1200 baud when cpu is in bootstrap mode.
|
| 411 |
|
|
|
| 412 |
|
|
* dv-m68hc11tim.c (m68hc11tim_io_write_buffer): Be able to
|
| 413 |
|
|
write in the TCTN timer register.
|
| 414 |
|
|
|
| 415 |
|
|
* dv-m68hc11sio.c (m68hc11sio_io_write_buffer): Divide cpu clock
|
| 416 |
|
|
by 4 to obtain the E clock frequency.
|
| 417 |
|
|
(sccr2_desc): Use M6811_TIE for TIE bit.
|
| 418 |
|
|
(m68hc11sio_info): Fix baud rate report.
|
| 419 |
|
|
|
| 420 |
|
|
* dv-m68hc11tim.c (to_realtime): Likewise.
|
| 421 |
|
|
|
| 422 |
|
|
* interp.c (sim_open): When building device tree, only provide
|
| 423 |
|
|
devices that do not exist yet.
|
| 424 |
|
|
|
| 425 |
|
|
* emulos.c: Fix compilation pb under Windows.
|
| 426 |
|
|
|
| 427 |
|
|
* dv-m68hc11.c (attach_m68hc11_regs): Get the clock frequency
|
| 428 |
|
|
from the 'clock' property.
|
| 429 |
|
|
|
| 430 |
|
|
2000-01-02 Stephane Carrez
|
| 431 |
|
|
|
| 432 |
|
|
* m68hc11_sim.h (*_REGNUM): Define.
|
| 433 |
|
|
(_sim_cpu): New member cpu_page0_reg table.
|
| 434 |
|
|
* interp.c (sim_create_inferior): Fill the cpu_page0_reg table with
|
| 435 |
|
|
addresses of soft registers in .page0.
|
| 436 |
|
|
(sim_fetch_register, sim_store_register): Use cpu_page0_reg table
|
| 437 |
|
|
to get/set soft registers.
|
| 438 |
|
|
|
| 439 |
|
|
1999-12-31 Stephane Carrez
|
| 440 |
|
|
|
| 441 |
|
|
* dv-m68hc11.c (m68hc11cpu_io_write_buffer): Clear byte to avoid
|
| 442 |
|
|
returning random values.
|
| 443 |
|
|
|
| 444 |
|
|
1999-12-17 Stephane Carrez
|
| 445 |
|
|
|
| 446 |
|
|
* gencode.c: Fix "subb N,x" that used a instead of b.
|
| 447 |
|
|
|
| 448 |
|
|
1999-09-09 Stephane Carrez
|
| 449 |
|
|
|
| 450 |
|
|
* gencode.c: Fixed sbc8 and adc8 when there was a initial carry.
|
| 451 |
|
|
|
| 452 |
|
|
1999-09-01 Stephane Carrez
|
| 453 |
|
|
|
| 454 |
|
|
* sim-main.h (SIM_HANDLES_LMA): Define to enable loading using lma.
|
| 455 |
|
|
|
| 456 |
|
|
1999-08-14 Stephane Carrez
|
| 457 |
|
|
|
| 458 |
|
|
* dv-m68hc11.c (attach_m68hc11_regs): Save the size of the
|
| 459 |
|
|
register region in the m68hc11cpu struct.
|
| 460 |
|
|
(m68hc11cpu_io_write): When the IO mapping addres changes,
|
| 461 |
|
|
detach the register region and re-attach it at the new address.
|
| 462 |
|
|
(m68hc11cpu_io_read_buffer): Renamed base_address into
|
| 463 |
|
|
attach_address.
|
| 464 |
|
|
(m68hc11cpu_io_write_buffer): Likewise. Pass the hw pointer
|
| 465 |
|
|
to m68hc11cpu_io_write.
|
| 466 |
|
|
|
| 467 |
|
|
1999-08-13 Stephane Carrez
|
| 468 |
|
|
|
| 469 |
|
|
* gencode.c: For sbc8, check the carry and increment the source
|
| 470 |
|
|
before trying to set the carry for the result.
|
| 471 |
|
|
|
| 472 |
|
|
1999-05-24 John S. Kallal
|
| 473 |
|
|
|
| 474 |
|
|
* interp.c (sim_get_info): Don't crash if the command line is 0.
|
| 475 |
|
|
Define prototype for sim_get_info() and init_system().
|
| 476 |
|
|
(sim_info): Correct call to sim_get_info().
|
| 477 |
|
|
|
| 478 |
|
|
1999-05-16 Stephane Carrez
|
| 479 |
|
|
|
| 480 |
|
|
* configure.in: Recognize m6811-*-*.
|
| 481 |
|
|
* configure: Regenerate.
|
| 482 |
|
|
* m68hc11_sim.h (cpu_ccr_update_add8, cpu_ccr_update_add16,
|
| 483 |
|
|
cpu_ccr_update_sub8, cpu_ccr_update_sub16):
|
| 484 |
|
|
Correct the computation of carry of 8 and 16-bits add and subtract.
|
| 485 |
|
|
* gencode.c: Use cpu_ccr_update_sub8 for subtraction (carry and
|
| 486 |
|
|
overflow set in a different manner than add).
|
| 487 |
|
|
|
| 488 |
|
|
1999-05-14 Stephane Carrez
|
| 489 |
|
|
|
| 490 |
|
|
* dv-m68hc11.c (dv_m6811_attach_address_callback): Removed a
|
| 491 |
|
|
trace message.
|
| 492 |
|
|
* interp.c (sim_open, sim_create_inferior): Initialize the
|
| 493 |
|
|
cpu_elf_start from the ELF header.
|
| 494 |
|
|
* m68hc11_sim.c (cpu_initialize): Clear the new data members.
|
| 495 |
|
|
(cpu_restart): Use cpu_elf_start as the starting address when
|
| 496 |
|
|
the flag is set.
|
| 497 |
|
|
(cpu_special): When cpu_use_elf_start is set, the WAI instruction
|
| 498 |
|
|
exits the simulator (exit status is in D).
|
| 499 |
|
|
* m68hc11_sim.h (_sim_cpu): Added members cpu_use_elf_start and
|
| 500 |
|
|
cpu_elf_star to start execution at address specified in ELF file.
|
| 501 |
|
|
|
| 502 |
|
|
1999-05-02 Stephane Carrez
|
| 503 |
|
|
|
| 504 |
|
|
* Makefile.in, config.in, configure, configure.in: New files.
|
| 505 |
|
|
* gencode.c: New file, generation of 68HC11 interpreter.
|
| 506 |
|
|
* m68hc11_sim.h, m68hc11_sim.c: New files, specific operations
|
| 507 |
|
|
for interpreter.
|
| 508 |
|
|
* interrupts.c, interrupts.h: New files, management of interrupts.
|
| 509 |
|
|
* interp.c, sim-main.h,
|
| 510 |
|
|
* dv-m68hc11.c, dv-m68hc11eepr.c, dv-m68hc11sio.c,
|
| 511 |
|
|
dv-m68hc11tim.c, dv-pram.c: New files representing devices for
|
| 512 |
|
|
68HC11 (dv-pram.c is generic and could probably migrate to common).
|
| 513 |
|
|
* emulos.c: New file, basic emulation of some os.
|
