Subversion Repositories or1k

# This is a list of toolchains that are supported on this board.

set_board_info target_install {d10v-elf}

# Load the generic configuration for this board. This will define a base set

# of routines needed by the tool to communicate with the board.

load_generic_config "d10v"

# No multilib options are needed by default for this board.

process_multilib_options "";

# We only support newlib on this target. We assume that all multilib

# options have been specified before we get here.

set_board_info compiler "[find_gcc]";

set_board_info cflags "[newlib_include_flags]";

set_board_info ldflags "[libgloss_link_flags] [newlib_link_flags]";

# No linker script needed.

set_board_info ldscript "";

# The board can't really return exit statuses and we need to indicate this;

# however, the standard GCC wrapper won't work with this target because

# it can't do I/O.

#set_board_info needs_status_wrapper  1

# It uses the remote stub protocol to talk to the board.

set_board_info gdb_protocol  "remote"

set_board_info use_gdb_stub  1

# Both the EVA and TS3 boards currently deal badly with X packets.

set_board_info disable_x_packet 1

# Both the EVA and TS3 boards currently deal badly with Z packets.

set_board_info disable_z_packet 1

# Used by gdb-comm.

set_board_info gdb_run_command  "jump *_start";

set_board_info gdb,start_symbol  "_start";

# Can't pass arguments to programs on this target.

set_board_info noargs  1

# And there's no support for signals.

set_board_info gdb,nosignals  1

# And it can't do I/O.

set_board_info gdb,noinferiorio  1

# Used by a few gcc.c-torture testcases to delimit how large the stack can

# be.

set_board_info gcc,stack_size  5000

# Used by a few gcc.c-torture testcases when trampolines are used.

set_board_info gcc,no_trampolines  1

# Used by a few gcc.c-torture testcases when labels as values are used.

set_board_info gcc,no_label_values  1

# sizeof int != sizeof long.

set_board_info gdb,short_int 1

# Some d10v:ts3 boards are in ts2-board compatibility mode after a reset.

# Force it into d10v:ts3 internal mode

set_board_info gdb_init_command "set \$dmap2 = 0x2000"