OpenCores
URL https://opencores.org/ocsvn/or1k/or1k/trunk

Subversion Repositories or1k

[/] [or1k/] [trunk/] [insight/] [gdb/] [op50-rom.c] - Blame information for rev 1774

Go to most recent revision | Details | Compare with Previous | View Log

Line No. Rev Author Line
1 578 markom
/* Remote target glue for the Oki op50n based eval board.
2
 
3
   Copyright 1995, 1998, 1999, 2000 Free Software Foundation, Inc.
4
 
5
   This file is part of GDB.
6
 
7
   This program is free software; you can redistribute it and/or modify
8
   it under the terms of the GNU General Public License as published by
9
   the Free Software Foundation; either version 2 of the License, or
10
   (at your option) any later version.
11
 
12
   This program is distributed in the hope that it will be useful,
13
   but WITHOUT ANY WARRANTY; without even the implied warranty of
14
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15
   GNU General Public License for more details.
16
 
17
   You should have received a copy of the GNU General Public License
18
   along with this program; if not, write to the Free Software
19
   Foundation, Inc., 59 Temple Place - Suite 330,
20
   Boston, MA 02111-1307, USA.  */
21
 
22
#include "defs.h"
23
#include "gdbcore.h"
24
#include "target.h"
25
#include "monitor.h"
26
#include "serial.h"
27
 
28
static void op50n_open (char *args, int from_tty);
29
 
30
/*
31
 * this array of registers need to match the indexes used by GDB. The
32
 * whole reason this exists is cause the various ROM monitors use
33
 * different strings than GDB does, and doesn't support all the
34
 * registers either. So, typing "info reg sp" becomes a "r30".
35
 */
36
 
37
static char *op50n_regnames[NUM_REGS] =
38
{
39
  "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
40
  "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
41
  "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
42
  "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
43
  "cr11", "p", NULL, NULL, NULL, "cr15", "cr19", "cr20",
44
  "cr21", "cr22", NULL, NULL, NULL, NULL, NULL, NULL,
45
  NULL, NULL, NULL, "cr0", "cr8", "cr9", "cr10", "cr12",
46
  "cr13", "cr24", "cr25", "cr26",
47
};
48
 
49
/*
50
 * Define the monitor command strings. Since these are passed directly
51
 * through to a printf style function, we need can include formatting
52
 * strings. We also need a CR or LF on the end.
53
 */
54
 
55
static struct target_ops op50n_ops;
56
 
57
static char *op50n_inits[] =
58
{".\r", NULL};
59
 
60
static struct monitor_ops op50n_cmds;
61
 
62
static void
63
init_op50n_cmds (void)
64
{
65
  op50n_cmds.flags = MO_CLR_BREAK_USES_ADDR /*| MO_GETMEM_READ_SINGLE */ ;      /* flags */
66
  op50n_cmds.init = op50n_inits;        /* Init strings */
67
  op50n_cmds.cont = "g\r";      /* continue command */
68
  op50n_cmds.step = "t\r";      /* single step */
69
  op50n_cmds.stop = "\003.\r";  /* Interrupt char */
70
  op50n_cmds.set_break = "b %x\r";      /* set a breakpoint */
71
  op50n_cmds.clr_break = "b %x;0\r";    /* clear breakpoint at addr */
72
  op50n_cmds.clr_all_break = "bx\r";    /* clear all breakpoints */
73
  op50n_cmds.fill = "fx %x s%x %x\r";   /* memory fill cmd (addr, len, val) */
74
  op50n_cmds.setmem.cmdb = "sx %x %x\r";        /* setmem.cmdb (addr, value) */
75
  op50n_cmds.setmem.cmdw = "sh %x %x\r";        /* setmem.cmdw (addr, value) */
76
  op50n_cmds.setmem.cmdl = "s %x %x\r";         /* setmem.cmdl (addr, value) */
77
  op50n_cmds.setmem.cmdll = NULL;       /* setmem.cmdll (addr, value) */
78
  op50n_cmds.setmem.resp_delim = NULL;  /* setmem.resp_delim */
79
  op50n_cmds.setmem.term = NULL;        /* setmem.term */
80
  op50n_cmds.setmem.term_cmd = NULL;    /* setmem.term_cmd */
81
#if 0
82
  {
83
    "sx %x\r",                  /* getmem.cmdb (addr, len) */
84
      "sh %x\r",                /* getmem.cmdw (addr, len) */
85
      "s %x\r",                 /* getmem.cmdl (addr, len) */
86
      NULL,                     /* getmem.cmdll (addr, len) */
87
      " : ",                    /* getmem.resp_delim */
88
      " ",                      /* getmem.term */
89
      ".\r",                    /* getmem.term_cmd */
90
  };
91
#else
92
  op50n_cmds.getmem.cmdb = "dx %x s%x\r";       /* getmem.cmdb (addr, len) */
93
  op50n_cmds.getmem.cmdw = NULL;        /* getmem.cmdw (addr, len) */
94
  op50n_cmds.getmem.cmdl = NULL;        /* getmem.cmdl (addr, len) */
95
  op50n_cmds.getmem.cmdll = NULL;       /* getmem.cmdll (addr, len) */
96
  op50n_cmds.getmem.resp_delim = " : ";         /* getmem.resp_delim */
97
  op50n_cmds.getmem.term = NULL;        /* getmem.term */
98
  op50n_cmds.getmem.term_cmd = NULL;    /* getmem.term_cmd */
99
#endif
100
  op50n_cmds.setreg.cmd = "x %s %x\r";  /* setreg.cmd (name, value) */
101
  op50n_cmds.setreg.resp_delim = NULL;  /* setreg.resp_delim */
102
  op50n_cmds.setreg.term = NULL;        /* setreg.term */
103
  op50n_cmds.setreg.term_cmd = NULL;    /* setreg.term_cmd */
104
  op50n_cmds.getreg.cmd = "x %s\r";     /* getreg.cmd (name) */
105
  op50n_cmds.getreg.resp_delim = "=";   /* getreg.resp_delim */
106
  op50n_cmds.getreg.term = " "; /* getreg.term */
107
  op50n_cmds.getreg.term_cmd = ".\r";   /* getreg.term_cmd */
108
  op50n_cmds.dump_registers = NULL;     /* dump_registers */
109
  op50n_cmds.register_pattern = NULL;   /* register_pattern */
110
  op50n_cmds.supply_register = NULL;    /* supply_register */
111
  op50n_cmds.load_routine = NULL;       /* load routine */
112
  op50n_cmds.load = "r 0\r";    /* download command */
113
  op50n_cmds.loadresp = NULL;   /* load response */
114
  op50n_cmds.prompt = "\n#";    /* monitor command prompt */
115
  op50n_cmds.line_term = "\r";  /* end-of-command delimitor */
116
  op50n_cmds.cmd_end = NULL;    /* optional command terminator */
117
  op50n_cmds.target = &op50n_ops;       /* target operations */
118
  op50n_cmds.stopbits = SERIAL_1_STOPBITS;      /* number of stop bits */
119
  op50n_cmds.regnames = op50n_regnames;         /* register names */
120
  op50n_cmds.magic = MONITOR_OPS_MAGIC;         /* magic */
121
};
122
 
123
static void
124
op50n_open (char *args, int from_tty)
125
{
126
  monitor_open (args, &op50n_cmds, from_tty);
127
}
128
 
129
void
130
_initialize_op50n (void)
131
{
132
  init_op50n_cmds ();
133
  init_monitor_ops (&op50n_ops);
134
 
135
  op50n_ops.to_shortname = "op50n";
136
  op50n_ops.to_longname = "Oki's debug monitor for the Op50n Eval board";
137
  op50n_ops.to_doc = "Debug on a Oki OP50N eval board.\n\
138
Specify the serial device it is connected to (e.g. /dev/ttya).";
139
  op50n_ops.to_open = op50n_open;
140
 
141
  add_target (&op50n_ops);
142
}

powered by: WebSVN 2.1.0

© copyright 1999-2024 OpenCores.org, equivalent to Oliscience, all rights reserved. OpenCores®, registered trademark.