Subversion Repositories or1k

# Copyright 1992, 1995, 1996, 1997, 1999 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 2 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program; if not, write to the Free Software

# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

# Please email any bugs, comments, and/or additions to this file to:

# bug-gdb@prep.ai.mit.edu

if $tracelevel then {

        strace $tracelevel

}

if [skip_chill_tests] then { continue }

set prms_id 0

set bug_id 0

# Set the current language to chill.  This counts as a test.  If it

# fails, then we skip the other tests.

set testfile "tests2"

set srcfile ${srcdir}/$subdir/${testfile}.ch

set binfile ${objdir}/${subdir}/${testfile}.exe

if  { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } {

    perror "Couldn't compile ${srcfile}"

    return -1

}

global infinity

if [istarget "i*86-*-sysv4*"] then {

    set infinity "inf"

} else {

    set infinity "Infinity"

}

proc set_lang_chill {} {

    global gdb_prompt

    global binfile objdir subdir

    if ![file exists $objdir/$subdir/$binfile] then {

        return 0

    }

    verbose "loading file '$objdir/$subdir/$binfile'"

    gdb_load $objdir/$subdir/$binfile

    send_gdb "set language chill\n"

    gdb_expect {

        -re ".*$gdb_prompt $" {}

        timeout { fail "set language chill (timeout)" ; return 0 }

    }

    send_gdb "show language\n"

    gdb_expect {

        -re ".* source language is \"chill\".*$gdb_prompt $" {

            pass "set language to \"chill\""

            send_gdb "break dummyfunc\n"

            gdb_expect {

                -re ".*$gdb_prompt $" {

                    send_gdb "run\n"

                    gdb_expect -re ".*$gdb_prompt $" {}

                    return 1

                }

                timeout {

                    fail "can't set breakpoint (timeout)"

                    return 0

                }

            }

        }

        -re ".*$gdb_prompt $" {

            fail "setting language to \"chill\""

            return 0

        }

        timeout {

            fail "can't show language (timeout)"

            return 0

        }

    }

}

# checks if structure was accessed correctly

proc test_write { args } {

    global gdb_prompt

    if [llength $args]==5 then {

        set message [lindex $args 4]

        set extended [lindex $args 3]

        set matchval [lindex $args 2]

    } elseif [llength $args]==4 then {

        set message [lindex $args 3]

        set matchval [lindex $args 2]

        set extended ""

    } elseif [llength $args]==3 then {

        set message [lindex $args 2]

        set extended ""

    } else {

        warning "test ($args) write called with wrong number of arguments"

        return

    }

    set location [lindex $args 0]

    set value [lindex $args 1]

    if ![info exists matchval] then {

        set matchval $value

    }

    verbose "loc: $location, val: $value, msg: $message, ext: $extended, match: $matchval"

    verbose "setting var $value..."

    send_gdb "set var $location.m$extended := $value\n"

    gdb_expect -re ".*$gdb_prompt $" {}

    gdb_test "print $location" \

      ".*= \[\[\]\\.p1: 2863311530, \\.m: $matchval, \\.p2: 1431655765\[\]\]"\

      "$message"

}

# test write access from gdb (setvar x:=y) from gdb

proc write_access { } {

    global infinity

    verbose "testing write access to locations"

    # discrete modes

    test_write b1 127 "byte write 1"

    test_write b1 -128 "byte write 2"

    test_write b1 0 "byte write 3"

    test_write ub1 255 "ubyte write 1"

    test_write ub1 0 "ubyte write 2"

    test_write ub1 42 "ubyte write 3"

    test_write i1 32767 "int write 1"

    test_write i1 -32768 "int write 2"

    test_write i1 0 "int write 3"

    test_write ui1 65535 "uint write 1"

    test_write ui1 0 "uint write 2"

    test_write ui1 123 "uint write 3"

    test_write l1 2147483647 "long write 1"

    test_write l1 -2147483648 "long write 2"

    test_write l1 0 "long write 3"

    test_write ul1 4294967295 "ulong write 1"

    test_write ul1 0 "ulong write 2"

    test_write ul1 1000000 "ulong write 3"

    test_write bo1 FALSE "bool write 1"

    test_write bo1 TRUE "bool write 2"

    test_write c1 \"1234\" "char write 1"

    test_write c2 \"1234567\" "char write 2"

    test_write c3 \"654321\" "char write 3"

    test_write c4 C'65' 'e' "char write 4"

    test_write bi1 B'10100101' "bitstring write 1"

    test_write bi2 B'0101001010' "bitstring write 2"

    test_write se1 a "set write 1"

    test_write se1 h "set write 2"

    # The following two use numbered sets with too-large values.

    setup_xfail "*-*-*"

    test_write nse1 nb "numbered set write 1"

    setup_xfail "*-*-*"

    test_write nse1 nc "numbered set write 2"

    test_write r1 127 "range write 1"

    test_write r2 32767 "range write 2"

    test_write r3 2147483647 "range write 3"

    # powerset modes

    test_write p1 {[pa:ph]} {\[pa:ph\]} "powerset write 1"

    test_write p1 {[pa, pc:pf, ph]} {\[pa, pc:pf, ph\]} "powerset write 2"

    test_write p1 {[pa, pc, pe, pg]} {\[pa, pc, pe, pg\]} "powerset write 3"

    test_write p1 {[]} {\[\]} "powerset write 4"

    test_write p2 {[1:32]} {\[1:32\]} "powerset write 5"

    test_write p2 {[1, 3:30, 32]} {\[1, 3:30, 32\]} "powerset write 6"

    test_write p2 {[1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31]} {\[1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31\]} \

        "powerset write 7"

    test_write p2 {[]} {\[\]} "powerset write 8"

# Fixme: this should be rejected by gnuchill

#    test_write p3 {[-2147483648:2147483647]} {\[-2147483648:2147483647\]} \

#       "powerset write 9"

#    test_write p3 {[-2147483648, -1000000:1000000, 2147483647]} \

#       {\[-2147483648, -1000000:1000000, 2147483647\]} \

#       "powerset write 10"

#    test_write p3 {[-99, -97, -95, 1001, 1003, 1005]} \

#       {\[-99, -97, -95, 1001, 1003, 1005\]} "powerset write 11"

#    test_write p3 {[]} {\[\]} "powerset write 12"

    # reference modes

    test_write ref1 ->ref1 {H'[0-9a-fA-F]+} "reference write 1"

    test_write ref2 ->b1 {H'[0-9a-fA-F]+} "reference write 2"

    test_write ref1 NULL "reference write 3"

    test_write ref2 NULL "reference write 4"

    # procedure modes

    test_write pr1 NULL "procefure write 1"

    # FIXME: remove when NULL is understood

    test_write pr1 0 NULL "procefure write 2"

    test_write pr1 dummyfunc {H'[0-9a-fA-F]+ } "procedure write 3"

    # timing modes, FIXME when callbacks to timefunctions are implemented

    #test_write ti1 abstime(1970, 3, 12, 10, 43, 0) {} "time write 1"

    #test_write ti2 

    xfail "timing modes not implemented yet"

    # real modes

    # This ones

    test_write re1 42.03 {42.0[0-9]*} "real write 1"

    test_write re1 0 "real write 2"

    test_write re1 "1e+38" {1e\+38|1\.0[0-9]*e\+38|9\.9[0-9]*e\+37} \

        "real write 3"

    setup_xfail "i*86-pc-linux-gnu" "m68*-*-hpux*"

    test_write re1 "1e+39" $infinity "real write 4"

    test_write re2 42.03 {42.0[0-9]*} "real write 5"

    test_write re2 0 "real write 6"

    test_write re2 "1e+308" {1e\+308} "real write 7"

    setup_xfail "i*86-pc-linux-gnu" "m68*-*-hpux*"

    test_write re2 "1e+309" $infinity "real write 8"

    # array modes

    test_write arrl1 {[(1:3): [(1:2): -128]]} {\[\(1:3\): \[\(1:2\): -128\]\]}\

        "array write 1"

    test_write arrl1 {[(1:3): [(1:2): 0]]} {\[\(1:3\): \[\(1:2\): 0\]\]}\

        "array write 2"

    test_write arrl1 {[(1): [(1:2): 127], (2): [(1:2): -128], (3): [(1:2): 127]]} {\[\(1\): \[\(1:2\): 127\], \(2\): \[\(1:2\): -128\], \(3\): \[\(1:2\): 127\]\]}\

        "array write 3"

     test_write arrl1 {[(1:3): [(1:2): 0]]} {\[\(1:3\): \[\(1:2\): 0\]\]}\

        "array write 4"

     setup_xfail "*-*-*"

     # Bogus test case - type mismatch?

     test_write arrl1 {[(1): 127, (2): -128]} "array write 5"

     test_write arrl1 {[(1:3): [(1:2): 0]]} {\[\(1:3\): \[\(1:2\): 0\]\]}\

        "array write 6"

    # structure modes

    test_write strul1 {[.a: -32768, .b: 32767, .ch: "ZZZZ"]} \

        {\[\.a: -32768, \.b: 32767, \.ch: \"ZZZZ\"\]} \

        "structure write 1"

    test_write strul1 {[.a: 0, .b: 0, .ch: "0000"]} \

        {\[\.a: 0, \.b: 0, \.ch: \"0000\"\]} \

        "structure write 2"

    test_write strul1 -32768 {\[\.a: -32768, \.b: 0, \.ch: \"0000\"\]} \

        {.a} "structure write 3"

    test_write strul1 {[.a: 0, .b: 0, .ch: "0000"]} \

        {\[\.a: 0, \.b: 0, \.ch: \"0000\"\]} \

        "structure write 4"

    test_write strul1 -32768 {\[\.a: 0, \.b: -32768, \.ch: \"0000\"\]} \

        {.b} "structure write 5"

    test_write strul1 {[.a: 0, .b: 0, .ch: "0000"]} \

        {\[\.a: 0, \.b: 0, \.ch: \"0000\"\]} \

        "structure write 6"

    test_write strul1 \"HUGO\" {\[\.a: 0, \.b: 0, \.ch: \"HUGO\"\]} \

        {.ch} "structure write 7"

}

# Start with a fresh gdb.

set binfile "tests2.exe"

gdb_exit

gdb_start

gdb_reinitialize_dir $srcdir/$subdir

gdb_test "set print sevenbit-strings" ".*"

if [set_lang_chill] then {

    write_access

} else {

    warning "$test_name tests suppressed."

}