Subversion Repositories or1k

#   Copyright 1999, 2000 Free Software Foundation, Inc.

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 2 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program; if not, write to the Free Software

# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

# Please email any bugs, comments, and/or additions to this file to:

# bug-gdb@prep.ai.mit.edu

#

# Test essential Machine interface (MI) operations

#

# Verify that, using the MI, we can run a simple program and look at registers.

#

# The goal is not to test gdb functionality, which is done by other tests,

# but to verify the correct output response to MI operations.

#

load_lib mi-support.exp

set MIFLAGS "-i=mi0"

gdb_exit

if [mi_gdb_start] {

    continue

}

set testfile "basics"

set srcfile ${testfile}.c

set binfile ${objdir}/${subdir}/${testfile}

if  { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug additional_flags=-DFAKEARGV}] != "" } {

     gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."

}

mi_delete_breakpoints

mi_gdb_reinitialize_dir $srcdir/$subdir

mi_gdb_load ${binfile}

proc test_breakpoints_creation_and_listing {} {

    global mi_gdb_prompt

    global srcfile

    global hex

    # Insert some breakpoints and list them

    # Also, disable some so they do not interfere with other tests

    # Tests:

    # -break-insert

    # -break-list

    # -break-disable

    # -break-info

    mi_gdb_test "200-break-insert main" \

             "200\\^done,bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"32\",times=\"0\"\}" \

             "break-insert operation"

    mi_gdb_test "204-break-list" \

                "204\\^done,BreakpointTable=\{hdr=\{.*\},bkpt=\{number=\"1\",type=\"breakpoint\",disp=\"keep\",enabled=\"y\",addr=\"$hex\",func=\"main\",file=\".*basics.c\",line=\"32\",times=\"0\"\}\}" \

                "list of breakpoints"

}

proc test_running_the_program {} {

    global mi_gdb_prompt

    global hex

    # Run the program without args

    # Tests:

    # -exec-run

    # mi_gdb_test cannot be used for asynchronous commands because there are

    # two prompts involved and this can lead to a race condition.

    # FIXME: We are accepting a duplicate file and line info temporarely.

    # The following is equivalent to a send_gdb "000-exec-run\n"

    mi_run_cmd

    # The running part has been checked already by mi_run_cmd

        gdb_expect {

            -re "\[\r\n\]*000\\*stopped,reason=\"breakpoint-hit\",bkptno=\"1\",thread-id=\"0\",frame=\{addr=\"$hex\",func=\"main\",args=\{\},file=\".*basics.c\",line=\"32\"\}\r\n$mi_gdb_prompt$" {

            pass "run to main"

          }

          -re ".*$mi_gdb_prompt$" {fail "run to main (2)"}

          timeout {fail "run to main (timeout 2)"}

        }

}

proc sparc_register_tests_no_exec { } {

        # Test the generic IDT chip.

        mi_gdb_test "111-data-list-register-values" \

                ".*111\\^error,msg=\"mi_cmd_data_list_register_values: Usage: -data-list-register-values  \\\[...\\\]\"" \

                "wrong arguments"

        mi_gdb_test "111-data-list-register-values x" \

                ".*111\\^error,msg=\"mi_cmd_data_list_register_values: No registers\.\"" \

                "no executable"

}

# These tests exercise IDT-specific MIPS registers for several

# different processor models.

# This should detect the actual processor in use and change

# the expected results appropriately.  FIXME

proc sparc_register_tests { } {

    global hex

    global decimal

    set octal "\[0-7\]+"

    set binary "\[0-1\]+"

    set float "-?\[0-9\]+(\.\[0-9\]+)?(e\[+\-\]\[0-9\]+)?"

    set float2 "\-?\[0-9\]+"

    mi_gdb_test "111-data-list-register-names" \

            "111\\^done,register-names=\{\"g0\",\"g1\",\"g2\",\"g3\",\"g4\",\"g5\",\"g6\",\"g7\",\"o0\",\"o1\",\"o2\",\"o3\",\"o4\",\"o5\",\"sp\",\"o7\",\"l0\",\"l1\",\"l2\",\"l3\",\"l4\",\"l5\",\"l6\",\"l7\",\"i0\",\"i1\",\"i2\",\"i3\",\"i4\",\"i5\",\"fp\",\"i7\",\"f0\",\"f1\",\"f2\",\"f3\",\"f4\",\"f5\",\"f6\",\"f7\",\"f8\",\"f9\",\"f10\",\"f11\",\"f12\",\"f13\",\"f14\",\"f15\",\"f16\",\"f17\",\"f18\",\"f19\",\"f20\",\"f21\",\"f22\",\"f23\",\"f24\",\"f25\",\"f26\",\"f27\",\"f28\",\"f29\",\"f30\",\"f31\",\"y\",\"psr\",\"wim\",\"tbr\",\"pc\",\"npc\",\"fpsr\",\"cpsr\"\}" \

            "list register names"

    mi_gdb_test "222-data-list-register-values x" \

            "222\\^done,register-values=\{\{number=\"0\",value=\"$hex\"\}.*\{number=\"71\",value=\"$hex\"\}\}" \

            "register values x"

    mi_gdb_test "333-data-list-register-values f" \

            "333\\^done,register-values=\{\{number=\"0\",value=\"$float\"\},\{number=\"1\",value=\"$float\"\},.*\{number=\"71\",value=\"$float\"\}\}" \

            "register values f"

    mi_gdb_test "444-data-list-register-values d" \

            "444\\^done,register-values=\{\{number=\"0\",value=\"$decimal\"\}.*\{number=\"71\",value=\"$decimal\"\}\}" \

            "register values d"

    mi_gdb_test "555-data-list-register-values o" \

            "555\\^done,register-values=\{\{number=\"0\",value=\"$octal\"\}.*\{number=\"71\",value=\"$octal\"\}\}" \

            "register values o"

    mi_gdb_test "666-data-list-register-values t" \

            "666\\^done,register-values=\{\{number=\"0\",value=\"$binary\"\}.*\{number=\"71\",value=\"$binary\"\}\}" \

            "register values t"

    # On the sparc, registers 0-31 are int, 32-63 float, 64-71 int

    mi_gdb_test "777-data-list-register-values N" \

            "777\\^done,register-values=\{\{number=\"0\",value=\"$decimal\"\}.*\{number=\"31\",value=\"$decimal\"\},\{number=\"32\",value=\"$float\"\}.*\{number=\"63\",value=\"$float\"\},\{number=\"64\",value=\"$decimal\"\}.*\{number=\"71\",value=\"$decimal\"\}\}" \

            "register values N"

    mi_gdb_test "888-data-list-register-values r" \

            "888\\^done,register-values=\{\{number=\"0\",value=\"$hex\"\}.*\{number=\"71\",value=\"$hex\"\}\}" \

            "register values r"

    mi_gdb_test "999-data-list-register-names 68 69 70 71" \

            "999\\^done,register-names=\{\"pc\",\"npc\",\"fpsr\",\"cpsr\"\}" \

            "list names of some regs"

    mi_gdb_test "001-data-list-register-values x 68 69 70 71" \

            "001\\^done,register-values=\{\{number=\"68\",value=\"$hex\"\},\{number=\"69\",value=\"$hex\"\},\{number=\"70\",value=\"$hex\"\},\{number=\"71\",value=\"$hex\"\}\}" \

            "list values of some regs"

    # Don't know how useful this test is

    mi_gdb_test "002-data-list-changed-registers" \

            "002\\^done,changed-registers=\{\"1\",\"9\",\"10\",\"11\",\"12\",\"13\",\"14\",\"15\",\"16\",\"23\",\"24\",\"25\",\"26\",\"27\",\"28\",\"30\",\"31\",\"65\",\"68\",\"69\"\}" \

            "list changed registers"

}

if [istarget "sparc-*-*"] then {

    sparc_register_tests_no_exec

    test_breakpoints_creation_and_listing

    test_running_the_program

    sparc_register_tests

} else {

    verbose "mi-regs.exp tests ignored for this target"

}

mi_gdb_exit

return 0