Subversion Repositories or1k

#   Copyright 1998 Free Software Foundation, Inc.

#

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; either version 2 of the License, or

# (at your option) any later version.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program; if not, write to the Free Software

# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

# Please email any bugs, comments, and/or additions to this file to:

# bug-gdb@prep.ai.mit.edu

# This file was written by Michael Snyder (msnyder@cygnus.com)

load_lib "trace-support.exp";

if $tracelevel then {

    strace $tracelevel

}

set prms_id 0

set bug_id 0

gdb_exit

gdb_start

if [istarget "m68k-*-elf"] then {

    set srcfile gdb_c_test.c

    set binfile [board_info target d490_binfile];

} else {

    set testfile "actions"

    set srcfile ${testfile}.c

    set binfile $objdir/$subdir/$testfile

    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \

            executable {debug additional_flags=-w}] != "" } {

        gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."

    }

}

gdb_reinitialize_dir $srcdir/$subdir

# If testing on a remote host, download the source file.

# remote_download host $srcdir/$subdir/$srcfile

gdb_file_cmd $binfile

# define relative source line numbers:

# all subsequent line numbers are relative to this first one (baseline)

set baseline  [gdb_find_recursion_test_baseline $srcfile];

if { $baseline == -1 } then {

    fail "Could not find gdb_recursion_test function"

    return;

}

set testline1  [expr $baseline + 3]

#

# test "passcount" command

#

gdb_delete_tracepoints

set trcpt1 [gdb_gettpnum gdb_c_test];

set trcpt2 [gdb_gettpnum gdb_asm_test];

set trcpt3 [gdb_gettpnum $testline1];

if { $trcpt1 <= 0 || $trcpt2 <= 0 || $trcpt3 <= 0 } then {

    fail "setting tracepoints"

    return;

}

# 4.1 passcount of specified tracepoint

gdb_test "info tracepoints" \

    "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_recursion_test.*" \

                        "4.1a: set three tracepoints, passcounts all zero"

gdb_test "passcount 2 $trcpt1" \

        "Setting tracepoint $trcpt1.s passcount to 2" \

        "4.1b: set 1st tracepoint's passcount to two"

gdb_test "info tracepoints" \

        "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_recursion_test.*" \

        "4.1c: verify 1st tracepoint's passcount set to two"

gdb_test "passcount 4 $trcpt2" \

        "Setting tracepoint $trcpt2.s passcount to 4" \

        "4.1d: set 2nd tracepoint's passcount to four"

gdb_test "info tracepoints" \

        "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_recursion_test.*" \

        "4.1c: verify 2nd tracepoint's passcount set to four"

# 4.2 passcount of last (default) tracepoint

gdb_test "passcount 6" \

        "Setting tracepoint $trcpt3.s passcount to 6" \

        "4.2b: set last (default) tp's passcount to six"

gdb_test "info tracepoints" \

        "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+6\[\t \]+.*in gdb_recursion_test.*" \

        "4.2b: verify last (default) tp's passcount set to six"

# 4.3 run until stopped explicitly by user

#     [deferred to dynamic test section]

# 4.4 reset the previously set passcounts to new values

gdb_test "passcount 7" \

        "Setting tracepoint $trcpt3.s passcount to 7" \

        "4.4a: reset last (default) tp's passcount to seven"

gdb_test "info tracepoints" \

        "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+7\[\t \]+.*in gdb_recursion_test.*" \

        "4.4a: verify reset last (default) tp's passcount to seven"

gdb_test "passcount 5 $trcpt2" \

        "Setting tracepoint $trcpt2.s passcount to 5" \

        "4.4b: reset second tracepoint's passcount to five"

gdb_test "info tracepoints" \

        "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+2\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+5\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+7\[\t \]+.*in gdb_recursion_test.*" \

        "4.4c: verify reset second tracepoint's passcount to five"

# 4.20  passcount for "all"

gdb_test "passcount 3 all" \

        ".*$trcpt1.s pass.* 3.*$trcpt2.s pass.* 3.*$trcpt3.s pass.* 3" \

        "4.20a: set all three passcounts to three"

gdb_test "info tracepoints" \

        "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+3\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+3\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+3\[\t \]+.*in gdb_recursion_test.*" \

        "4.20a: set all three passcounts to three"

gdb_test "passcount 4 all" \

        ".*$trcpt1.s pass.* 4.*$trcpt2.s pass.* 4.*$trcpt3.s pass.* 4" \

        "4.20a: reset all three passcounts to four"

gdb_test "info tracepoints" \

        "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_recursion_test.*" \

        "4.20b: reset all three passcounts to four"

# 4.5 Verify trace stops on first "satisfied" passcount

#     [deferred to dynamic test section]

# 4.6 minimum passcount boundary condition

gdb_test "passcount 0 $trcpt1" \

        "Setting tracepoint $trcpt1.s passcount to 0" \

        "4.6: set passcount to zero"

gdb_test "info tracepoints" \

        "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+0\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_recursion_test.*" \

        "4.6: set passcount to zero"

# 4.7 (test a very large passcount)

gdb_test "passcount 32767 $trcpt1" \

        "Setting tracepoint $trcpt1.s passcount to 32767" \

        "4.7: set passcount to large number (32767)"

gdb_test "info tracepoints" \

        "Num Enb Address\[ \]+PassC StepC What.*$trcpt1\[\t \]+y\[\t \]+$hex\[\t \]+32767\[\t \]+.*in gdb_c_test.*$trcpt2\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*gdb_asm_test.*$trcpt3\[\t \]+y\[\t \]+$hex\[\t \]+4\[\t \]+.*in gdb_recursion_test.*" \

        "4.7: set passcount to large number (32767)"

# 4.8 set passcount for invalid tracepoint

gdb_test "passcount 1 [expr $trcpt2 + $trcpt3]" \

        "No tracepoint number [expr $trcpt2 + $trcpt3]." \

        "4.8: invalid tracepoint number in passcount"

# 4.9 help passcount

gdb_test "help passcount" "Set the passcount for a tracepoint.*" \

        "4.9: help passcount"