Subversion Repositories or1k

/* Print instructions for the Motorola 88000, for GDB and GNU Binutils.

   Copyright 1986, 1987, 1988, 1989, 1990, 1991, 1993, 1998, 2000, 2001

   Free Software Foundation, Inc.

   Contributed by Data General Corporation, November 1989.

   Partially derived from an earlier printcmd.c.

This file is part of GDB and the GNU Binutils.

This program is free software; you can redistribute it and/or modify

it under the terms of the GNU General Public License as published by

the Free Software Foundation; either version 2 of the License, or

(at your option) any later version.

This program is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

GNU General Public License for more details.

You should have received a copy of the GNU General Public License

along with this program; if not, write to the Free Software

Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

#include "sysdep.h"

#include "dis-asm.h"

#include "opcode/m88k.h"

#include "opintl.h"

INSTAB  *hashtable[HASHVAL] = {0};

static int

m88kdis PARAMS ((bfd_vma, unsigned long, struct disassemble_info *));

static void

printop PARAMS ((struct disassemble_info *, OPSPEC *, unsigned long, bfd_vma, int));

static void

init_disasm PARAMS ((void));

static void

install PARAMS ((INSTAB *instptr));

/* Disassemble an M88000 instruction at `memaddr'.  */

int

print_insn_m88k (memaddr, info)

     bfd_vma memaddr;

     struct disassemble_info *info;

{

  bfd_byte buffer[4];

  int status;

  /* Instruction addresses may have low two bits set. Clear them.  */

  memaddr &=~ (bfd_vma) 3;

  status = (*info->read_memory_func) (memaddr, buffer, 4, info);

  if (status != 0)

    {

      (*info->memory_error_func) (status, memaddr, info);

      return -1;

    }

  return m88kdis (memaddr, bfd_getb32 (buffer), info);

}

/*

 * Disassemble the instruction in `instruction'.

 * `pc' should be the address of this instruction, it will be used to

 * print the target address if this is a relative jump or call the

 * disassembled instruction is written to `info'.

 *

 * The function returns the length of this instruction in bytes.

 */

static int

m88kdis (pc, instruction, info)

     bfd_vma pc;

     unsigned long instruction;

     struct disassemble_info *info;

{

  static int ihashtab_initialized = 0;

  unsigned int opcode;

  INSTAB *entry_ptr;

  int opmask;

  unsigned int class;

  if (! ihashtab_initialized)

    init_disasm ();

  /* Create the appropriate mask to isolate the opcode.  */

  opmask = DEFMASK;

  class = instruction & DEFMASK;

  if ((class >= SFU0) && (class <= SFU7))

    {

      if (instruction < SFU1)

        opmask = CTRLMASK;

      else

        opmask = SFUMASK;

    }

  else if (class == RRR)

    opmask = RRRMASK;

  else if (class == RRI10)

    opmask = RRI10MASK;

  /* Isolate the opcode.  */

  opcode = instruction & opmask;

  /* Search the hash table with the isolated opcode.  */

  for (entry_ptr = hashtable[opcode % HASHVAL];

       (entry_ptr != NULL) && (entry_ptr->opcode != opcode);

       entry_ptr = entry_ptr->next)

    ;

  if (entry_ptr == NULL)

    (*info->fprintf_func) (info->stream, "word\t%08x", instruction);

  else

    {

      (*info->fprintf_func) (info->stream, "%s", entry_ptr->mnemonic);

      printop (info, &(entry_ptr->op1), instruction, pc, 1);

      printop (info, &(entry_ptr->op2), instruction, pc, 0);

      printop (info, &(entry_ptr->op3), instruction, pc, 0);

    }

  return 4;

}

/*

 * Decode an Operand of an instruction.

 *

 * This function formats and writes an operand of an instruction to

 * info based on the operand specification.  When the `first' flag is

 * set this is the first operand of an instruction.  Undefined operand

 * types cause a <dis error> message.

 *

 * Parameters:

 *  disassemble_info    where the operand may be printed

 *  OPSPEC  *opptr      pointer to an operand specification

 *  UINT    inst        instruction from which operand is extracted

 *  UINT    pc          pc of instruction; used for pc-relative disp.

 *  int     first       flag which if nonzero indicates the first

 *                      operand of an instruction

 *

 * The operand specified is extracted from the instruction and is

 * written to buf in the format specified. The operand is preceded by

 * a comma if it is not the first operand of an instruction and it is

 * not a register indirect form.  Registers are preceded by 'r' and

 * hex values by '0x'.

 */

static void

printop (info, opptr, inst, pc, first)

     struct disassemble_info *info;

     OPSPEC *opptr;

     unsigned long inst;

     bfd_vma pc;

     int first;

{

  int extracted_field;

  char *cond_mask_sym;

  if (opptr->width == 0)

    return;

  if (! first)

    {

      switch (opptr->type)

        {

        case REGSC:

        case CONT:

          break;

        default:

          (*info->fprintf_func) (info->stream, ",");

          break;

        }

    }

  switch (opptr->type)

    {

    case CRREG:

      (*info->fprintf_func) (info->stream, "cr%d",

                             UEXT (inst, opptr->offset, opptr->width));

      break;

    case FCRREG:

      (*info->fprintf_func) (info->stream, "fcr%d",

                             UEXT (inst, opptr->offset, opptr->width));

      break;

    case REGSC:

      (*info->fprintf_func) (info->stream, "[r%d]",

                             UEXT (inst, opptr->offset, opptr->width));

      break;

    case REG:

      (*info->fprintf_func) (info->stream, "r%d",

                             UEXT (inst, opptr->offset, opptr->width));

      break;

    case XREG:

      (*info->fprintf_func) (info->stream, "x%d",

                             UEXT (inst, opptr->offset, opptr->width));

      break;

    case HEX:

      extracted_field = UEXT (inst, opptr->offset, opptr->width);

      if (extracted_field == 0)

        (*info->fprintf_func) (info->stream, "0");

      else

        (*info->fprintf_func) (info->stream, "0x%02x", extracted_field);

      break;

    case DEC:

      extracted_field = UEXT (inst, opptr->offset, opptr->width);

      (*info->fprintf_func) (info->stream, "%d", extracted_field);

      break;

    case CONDMASK:

      extracted_field = UEXT (inst, opptr->offset, opptr->width);

      switch (extracted_field & 0x0f)

        {

        case 0x1: cond_mask_sym = "gt0"; break;

        case 0x2: cond_mask_sym = "eq0"; break;

        case 0x3: cond_mask_sym = "ge0"; break;

        case 0xc: cond_mask_sym = "lt0"; break;

        case 0xd: cond_mask_sym = "ne0"; break;

        case 0xe: cond_mask_sym = "le0"; break;

        default: cond_mask_sym = NULL; break;

        }

      if (cond_mask_sym != NULL)

        (*info->fprintf_func) (info->stream, "%s", cond_mask_sym);

      else

        (*info->fprintf_func) (info->stream, "%x", extracted_field);

      break;

    case PCREL:

      (*info->print_address_func)

        (pc + (4 * (SEXT (inst, opptr->offset, opptr->width))),

         info);

      break;

    case CONT:

      (*info->fprintf_func) (info->stream, "%d,r%d",

                             UEXT (inst, opptr->offset, 5),

                             UEXT (inst, (opptr->offset) + 5, 5));

      break;

    case BF:

      (*info->fprintf_func) (info->stream, "%d<%d>",

                             UEXT (inst, (opptr->offset) + 5, 5),

                             UEXT (inst, opptr->offset, 5));

      break;

    default:

      /* xgettext:c-format */

      (*info->fprintf_func) (info->stream, _("# <dis error: %08x>"), inst);

    }

}

/*

 * Initialize the disassembler instruction table.

 *

 * Initialize the hash table and instruction table for the

 * disassembler.  This should be called once before the first call to

 * disasm().

 */

static void

init_disasm ()

{

  int i, size;

  for (i = 0; i < HASHVAL; i++)

    hashtable[i] = NULL;

  size = sizeof (instructions) / sizeof (INSTAB);

  for (i = 0; i < size; i++)

    install (&instructions[i]);

}

/*

 * Insert an instruction into the disassembler table by hashing the

 * opcode and inserting it into the linked list for that hash value.

 */

static void

install (instptr)

     INSTAB *instptr;

{

  unsigned int i;

  i = (instptr->opcode) % HASHVAL;

  instptr->next = hashtable[i];

  hashtable[i] = instptr;

}