Subversion Repositories or1k

This is a loose collection of notes for people hacking on simulators.

If this document gets big enough it can be prettied up then.

Contents

- The "common" directory

- Common Makefile Support

- TAGS support

- Generating "configure" files

- tconfig.in

- C Language Assumptions

- "dump" commands under gdb

The "common" directory

======================

The common directory contains:

- common documentation files (e.g. run.1, and maybe in time .texi files)

- common source files (e.g. run.c)

- common Makefile fragment and configury (e.g. Make-common.in, aclocal.m4).

In addition "common" contains portions of the system call support

(e.g. callback.c, nltvals.def).

Even though no files are built in this directory, it is still configured

so support for regenerating nltvals.def is present.

Common Makefile Support

=======================

A common configuration framework is available for simulators that want

to use it.  The common framework exists to remove a lot of duplication

in configure.in and Makefile.in, and it also provides a foundation for

enhancing the simulators uniformly (e.g. the more they share in common

the easier a feature added to one is added to all).

The configure.in of a simulator using the common framework should look like:

--- snip ---

dnl Process this file with autoconf to produce a configure script.

sinclude(../common/aclocal.m4)

AC_PREREQ(2.5)dnl

AC_INIT(Makefile.in)

SIM_AC_COMMON

... target specific additions ...

SIM_AC_OUTPUT

--- snip ---

SIM_AC_COMMON:

- invokes the autoconf macros most often used by the simulators

- defines --enable/--with options usable by all simulators

- initializes sim_link_files/sim_link_links as the set of symbolic links

  to set up

SIM_AC_OUTPUT:

- creates the symbolic links defined in sim_link_{files,links}

- creates config.h

- creates the Makefile

The Makefile.in of a simulator using the common framework should look like:

--- snip ---

# Makefile for blah ...

# Copyright blah ...

## COMMON_PRE_CONFIG_FRAG

# These variables are given default values in COMMON_PRE_CONFIG_FRAG.

# We override the ones we need to here.

# Not all of these need to be mentioned, only the necessary ones.

# In fact it is better to *not* mention ones if the value is the default.

# List of object files, less common parts.

SIM_OBJS =

# List of extra dependencies.

# Generally this consists of simulator specific files included by sim-main.h.

SIM_EXTRA_DEPS =

# List of flags to always pass to $(CC).

SIM_EXTRA_CFLAGS =

# List of extra libraries to link with.

SIM_EXTRA_LIBS =

# List of extra program dependencies.

SIM_EXTRA_LIBDEPS =

# List of main object files for `run'.

SIM_RUN_OBJS = run.o

# Dependency of `all' to build any extra files.

SIM_EXTRA_ALL =

# Dependency of `install' to install any extra files.

SIM_EXTRA_INSTALL =

# Dependency of `clean' to clean any extra files.

SIM_EXTRA_CLEAN =

## COMMON_POST_CONFIG_FRAG

# Rules need to build $(SIM_OBJS), plus whatever else the target wants.

... target specific rules ...

--- snip ---

COMMON_{PRE,POST}_CONFIG_FRAG are markers for SIM_AC_OUTPUT to tell it

where to insert the two pieces of common/Make-common.in.

The resulting Makefile is created by doing autoconf substitions on

both the target's Makefile.in and Make-common.in, and inserting

the two pieces of Make-common.in into the target's Makefile.in at

COMMON_{PRE,POST}_CONFIG_FRAG.

Note that SIM_EXTRA_{INSTALL,CLEAN} could be removed and "::" targets

could be used instead.  However, it's not clear yet whether "::" targets

are portable enough.

TAGS support

============

Many files generate program symbols at compile time.

Such symbols can't be found with grep nor do they normally appear in

the TAGS file.  To get around this, source files can add the comment

/* TAGS: foo1 foo2 */

where foo1, foo2 are program symbols.  Symbols found in such comments

are greppable and appear in the TAGS file.

Generating "configure" files

============================

For targets using the common framework, "configure" can be generated

by running `autoconf'.

To regenerate the configure files for all targets using the common framework:

        $  cd devo/sim

        $  make -f Makefile.in SHELL=/bin/sh autoconf-common

To add a change-log entry to the ChangeLog file for each updated

directory (WARNING - check the modified new-ChangeLog files before

renaming):

        $  make -f Makefile.in SHELL=/bin/sh autoconf-changelog

        $  more */new-ChangeLog

        $  make -f Makefile.in SHELL=/bin/sh autoconf-install

In a similar vein, both the configure and config.in files can be

updated using the sequence:

        $  cd devo/sim

        $  make -f Makefile.in SHELL=/bin/sh autoheader-common

        $  make -f Makefile.in SHELL=/bin/sh autoheader-changelog

        $  more */new-ChangeLog

        $  make -f Makefile.in SHELL=/bin/sh autoheader-install

tconfig.in

==========

File tconfig.in defines one or more target configuration macros

(e.g. a tm.h file).  There are very few that need defining.

For a list of all of them, see common/tconfig.in.

It contains them all, commented out.

The intent is that a new port can just copy this file and

define the ones it needs.

C Language Assumptions

======================

The programmer may assume that the simulator is being built using an

ANSI C compiler that supports a 64 bit data type.  Consequently:

        o       prototypes can be used (although using

                PARAMS() and K&R declarations wouldn't

                go astray).

        o       If sim-types.h is included, the two

                types signed64 and unsigned64 are

                available.

        o       The type `unsigned' is valid.

However, the user should be aware of the following:

        o       GCC's `LL' is NOT acceptable.

                Microsoft-C doesn't reconize it.

        o       MSC's `i64' is NOT acceptable.

                GCC doesn't reconize it.

        o       GCC's `long long' MSC's `_int64' can

                NOT be used to define 64 bit integer data

                types.

        o       An empty array (eg int a[0]) is not valid.

When building with GCC it is effectivly a requirement that

--enable-build-warnings=,-Werror be specified during configuration.

"dump" commands under gdb

=========================

gdbinit.in contains the following

define dump

set sim_debug_dump ()

end

Simulators that define the sim_debug_dump function can then have their

internal state pretty printed from gdb.

FIXME: This can obviously be made more elaborate.  As needed it will be.

Rebuilding nltvals.def

======================

Checkout a copy of the SIM and LIBGLOSS modules (Unless you've already

got one to hand):

        $  mkdir /tmp/$$

        $  cd /tmp/$$

        $  cvs checkout sim-no-testsuite libgloss-no-testsuite newlib-no-testsuite

Configure things for an arbitrary simulator target (I've d10v for

convenience):

        $  mkdir /tmp/$$/build

        $  cd /tmp/$$/build

        $  /tmp/$$/devo/configure --target=d10v-elf

In the sim/common directory rebuild the headers:

        $  cd sim/common

        $  make headers

To add a new target:

        devo/sim/common/gennltvals.sh

                Add your new processor target (you'll need to grub

                around to find where your syscall.h lives).

        devo/sim//Makefile.in

                Add the definition:

                        ``NL_TARGET = -DNL_TARGET_d10v''

                just before the line COMMON_POST_CONFIG_FRAG.

        devo/sim//*.[ch]

                Include targ-vals.h instead of syscall.h.