Subversion Repositories or1k

/*

 * tcl.h --

 *

 *      This header file describes the externally-visible facilities

 *      of the Tcl interpreter.

 *

 * Copyright (c) 1987-1994 The Regents of the University of California.

 * Copyright (c) 1994-1997 Sun Microsystems, Inc.

 * Copyright (c) 1993-1996 Lucent Technologies.

 * Copyright (c) 1998 by Scriptics Corporation.

 *

 * See the file "license.terms" for information on usage and redistribution

 * of this file, and for a DISCLAIMER OF ALL WARRANTIES.

 *

 * RCS: @(#) $Id: tcl.h,v 1.1.1.1 2002-01-16 10:25:25 markom Exp $

 */

#ifndef _TCL

#define _TCL

/*

 * When version numbers change here, must also go into the following files

 * and update the version numbers:

 *

 * README

 * library/init.tcl     (only if major.minor changes, not patchlevel)

 * unix/configure.in

 * win/makefile.bc      (only if major.minor changes, not patchlevel)

 * win/makefile.vc      (only if major.minor changes, not patchlevel)

 * win/README

 * win/README.binary

 *

 * The release level should be  0 for alpha, 1 for beta, and 2 for

 * final/patch.  The release serial value is the number that follows the

 * "a", "b", or "p" in the patch level; for example, if the patch level

 * is 7.6b2, TCL_RELEASE_SERIAL is 2.  It restarts at 1 whenever the

 * release level is changed, except for the final release which is 0

 * (the first patch will start at 1).

 */

#define TCL_MAJOR_VERSION   8

#define TCL_MINOR_VERSION   0

#define TCL_RELEASE_LEVEL   2

#define TCL_RELEASE_SERIAL  4

#define TCL_VERSION         "8.0"

#define TCL_PATCH_LEVEL     "8.0.4"

/*

 * The following definitions set up the proper options for Windows

 * compilers.  We use this method because there is no autoconf equivalent.

 */

#ifndef __WIN32__

#   if defined(_WIN32) || defined(WIN32)

#       define __WIN32__

#   endif

#endif

#ifdef __WIN32__

#   ifndef STRICT

#       define STRICT

#   endif

#   ifndef USE_PROTOTYPE

#       define USE_PROTOTYPE 1

#   endif

#   ifndef HAS_STDARG

#       define HAS_STDARG 1

#   endif

#   ifndef USE_PROTOTYPE

#       define USE_PROTOTYPE 1

#   endif

#   ifndef USE_TCLALLOC

#       define USE_TCLALLOC 1

#   endif

#endif /* __WIN32__ */

/*

 * The following definitions set up the proper options for Macintosh

 * compilers.  We use this method because there is no autoconf equivalent.

 */

#ifdef MAC_TCL

#   ifndef HAS_STDARG

#       define HAS_STDARG 1

#   endif

#   ifndef USE_TCLALLOC

#       define USE_TCLALLOC 1

#   endif

#   ifndef NO_STRERROR

#       define NO_STRERROR 1

#   endif

#endif

/*

 * Utility macros: STRINGIFY takes an argument and wraps it in "" (double

 * quotation marks), JOIN joins two arguments.

 */

#define VERBATIM(x) x

#ifdef _MSC_VER

# define STRINGIFY(x) STRINGIFY1(x)

# define STRINGIFY1(x) #x

# define JOIN(a,b) JOIN1(a,b)

# define JOIN1(a,b) a##b

#else

# ifdef RESOURCE_INCLUDED

#  define STRINGIFY(x) STRINGIFY1(x)

#  define STRINGIFY1(x) #x

#  define JOIN(a,b) JOIN1(a,b)

#  define JOIN1(a,b) a##b

# else

#  ifdef __STDC__

#   define STRINGIFY(x) #x

#   define JOIN(a,b) a##b

#  else

#   define STRINGIFY(x) "x"

#   define JOIN(a,b) VERBATIM(a)VERBATIM(b)

#  endif

# endif

#endif

/*

 * A special definition used to allow this header file to be included

 * in resource files so that they can get obtain version information from

 * this file.  Resource compilers don't like all the C stuff, like typedefs

 * and procedure declarations, that occur below.

 */

#ifndef RESOURCE_INCLUDED

#ifndef BUFSIZ

#include <stdio.h>

#endif

/*

 * Definitions that allow Tcl functions with variable numbers of

 * arguments to be used with either varargs.h or stdarg.h.  TCL_VARARGS

 * is used in procedure prototypes.  TCL_VARARGS_DEF is used to declare

 * the arguments in a function definiton: it takes the type and name of

 * the first argument and supplies the appropriate argument declaration

 * string for use in the function definition.  TCL_VARARGS_START

 * initializes the va_list data structure and returns the first argument.

 */

#if defined(__STDC__) || defined(HAS_STDARG)

#   define TCL_VARARGS(type, name) (type name, ...)

#   define TCL_VARARGS_DEF(type, name) (type name, ...)

#   define TCL_VARARGS_START(type, name, list) (va_start(list, name), name)

#else

#   ifdef __cplusplus

#       define TCL_VARARGS(type, name) (type name, ...)

#       define TCL_VARARGS_DEF(type, name) (type va_alist, ...)

#   else

#       define TCL_VARARGS(type, name) ()

#       define TCL_VARARGS_DEF(type, name) (va_alist)

#   endif

#   define TCL_VARARGS_START(type, name, list) \

        (va_start(list), va_arg(list, type))

#endif

/*

 * Macros used to declare a function to be exported by a DLL.

 * Used by Windows, maps to no-op declarations on non-Windows systems.

 * The default build on windows is for a DLL, which causes the DLLIMPORT

 * and DLLEXPORT macros to be nonempty. To build a static library, the

 * macro STATIC_BUILD should be defined.

 * The support follows the convention that a macro called BUILD_xxxx, where

 * xxxx is the name of a library we are building, is set on the compile line

 * for sources that are to be placed in the library. See BUILD_tcl in this

 * file for an example of how the macro is to be used.

 */

#ifdef __WIN32__

# ifdef STATIC_BUILD

#  define DLLIMPORT

#  define DLLEXPORT

# else

#  ifdef _MSC_VER

#   define DLLIMPORT __declspec(dllimport)

#   define DLLEXPORT __declspec(dllexport)

#  else

#   define DLLIMPORT

#   define DLLEXPORT

#  endif

# endif

#else

# define DLLIMPORT

# define DLLEXPORT

#endif

#ifdef TCL_STORAGE_CLASS

# undef TCL_STORAGE_CLASS

#endif

#ifdef BUILD_tcl

# define TCL_STORAGE_CLASS DLLEXPORT

#else

# define TCL_STORAGE_CLASS DLLIMPORT

#endif

/*

 * Definitions that allow this header file to be used either with or

 * without ANSI C features like function prototypes.

 */

#undef _ANSI_ARGS_

#undef CONST

#if ((defined(__STDC__) || defined(SABER)) && !defined(NO_PROTOTYPE)) || defined(__cplusplus) || defined(USE_PROTOTYPE)

#   define _USING_PROTOTYPES_ 1

#   define _ANSI_ARGS_(x)       x

#   define CONST const

#else

#   define _ANSI_ARGS_(x)       ()

#   define CONST

#endif

#ifdef __cplusplus

#   define EXTERN extern "C" TCL_STORAGE_CLASS

#else

#   define EXTERN extern TCL_STORAGE_CLASS

#endif

/*

 * Macro to use instead of "void" for arguments that must have

 * type "void *" in ANSI C;  maps them to type "char *" in

 * non-ANSI systems.

 */

#ifndef __WIN32__

#ifndef VOID

#   ifdef __STDC__

#       define VOID void

#   else

#       define VOID char

#   endif

#endif

#else /* __WIN32__ */

/*

 * The following code is copied from winnt.h

 */

#ifndef VOID

#define VOID void

typedef char CHAR;

typedef short SHORT;

typedef long LONG;

#endif

#endif /* __WIN32__ */

/*

 * Miscellaneous declarations.

 */

#ifndef NULL

#define NULL 0

#endif

#ifndef _CLIENTDATA

#   if defined(__STDC__) || defined(__cplusplus)

    typedef void *ClientData;

#   else

    typedef int *ClientData;

#   endif /* __STDC__ */

#define _CLIENTDATA

#endif

/*

 * Data structures defined opaquely in this module. The definitions below

 * just provide dummy types. A few fields are made visible in Tcl_Interp

 * structures, namely those used for returning a string result from

 * commands. Direct access to the result field is discouraged in Tcl 8.0.

 * The interpreter result is either an object or a string, and the two

 * values are kept consistent unless some C code sets interp->result

 * directly. Programmers should use either the procedure Tcl_GetObjResult()

 * or Tcl_GetStringResult() to read the interpreter's result. See the

 * SetResult man page for details.

 *

 * Note: any change to the Tcl_Interp definition below must be mirrored

 * in the "real" definition in tclInt.h.

 *

 * Note: Tcl_ObjCmdProc procedures do not directly set result and freeProc.

 * Instead, they set a Tcl_Obj member in the "real" structure that can be

 * accessed with Tcl_GetObjResult() and Tcl_SetObjResult().

 */

typedef struct Tcl_Interp {

    char *result;               /* If the last command returned a string

                                 * result, this points to it. */

    void (*freeProc) _ANSI_ARGS_((char *blockPtr));

                                /* Zero means the string result is

                                 * statically allocated. TCL_DYNAMIC means

                                 * it was allocated with ckalloc and should

                                 * be freed with ckfree. Other values give

                                 * the address of procedure to invoke to

                                 * free the result. Tcl_Eval must free it

                                 * before executing next command. */

    int errorLine;              /* When TCL_ERROR is returned, this gives

                                 * the line number within the command where

                                 * the error occurred (1 if first line). */

} Tcl_Interp;

typedef struct Tcl_AsyncHandler_ *Tcl_AsyncHandler;

typedef struct Tcl_Channel_ *Tcl_Channel;

typedef struct Tcl_Command_ *Tcl_Command;

typedef struct Tcl_Event Tcl_Event;

typedef struct Tcl_Pid_ *Tcl_Pid;

typedef struct Tcl_RegExp_ *Tcl_RegExp;

typedef struct Tcl_TimerToken_ *Tcl_TimerToken;

typedef struct Tcl_Trace_ *Tcl_Trace;

typedef struct Tcl_Var_ *Tcl_Var;

/*

 * When a TCL command returns, the interpreter contains a result from the

 * command. Programmers are strongly encouraged to use one of the

 * procedures Tcl_GetObjResult() or Tcl_GetStringResult() to read the

 * interpreter's result. See the SetResult man page for details. Besides

 * this result, the command procedure returns an integer code, which is

 * one of the following:

 *

 * TCL_OK               Command completed normally; the interpreter's

 *                      result contains the command's result.

 * TCL_ERROR            The command couldn't be completed successfully;

 *                      the interpreter's result describes what went wrong.

 * TCL_RETURN           The command requests that the current procedure

 *                      return; the interpreter's result contains the

 *                      procedure's return value.

 * TCL_BREAK            The command requests that the innermost loop

 *                      be exited; the interpreter's result is meaningless.

 * TCL_CONTINUE         Go on to the next iteration of the current loop;

 *                      the interpreter's result is meaningless.

 */

#define TCL_OK          0

#define TCL_ERROR       1

#define TCL_RETURN      2

#define TCL_BREAK       3

#define TCL_CONTINUE    4

#define TCL_RESULT_SIZE 200

/*

 * Argument descriptors for math function callbacks in expressions:

 */

typedef enum {TCL_INT, TCL_DOUBLE, TCL_EITHER} Tcl_ValueType;

typedef struct Tcl_Value {

    Tcl_ValueType type;         /* Indicates intValue or doubleValue is

                                 * valid, or both. */

    long intValue;              /* Integer value. */

    double doubleValue;         /* Double-precision floating value. */

} Tcl_Value;

/*

 * Forward declaration of Tcl_Obj to prevent an error when the forward

 * reference to Tcl_Obj is encountered in the procedure types declared

 * below.

 */

struct Tcl_Obj;

/*

 * Procedure types defined by Tcl:

 */

typedef int (Tcl_AppInitProc) _ANSI_ARGS_((Tcl_Interp *interp));

typedef int (Tcl_AsyncProc) _ANSI_ARGS_((ClientData clientData,

        Tcl_Interp *interp, int code));

typedef void (Tcl_ChannelProc) _ANSI_ARGS_((ClientData clientData, int mask));

typedef void (Tcl_CloseProc) _ANSI_ARGS_((ClientData data));

typedef void (Tcl_CmdDeleteProc) _ANSI_ARGS_((ClientData clientData));

typedef int (Tcl_CmdProc) _ANSI_ARGS_((ClientData clientData,

        Tcl_Interp *interp, int argc, char *argv[]));

typedef void (Tcl_CmdTraceProc) _ANSI_ARGS_((ClientData clientData,

        Tcl_Interp *interp, int level, char *command, Tcl_CmdProc *proc,

        ClientData cmdClientData, int argc, char *argv[]));

typedef void (Tcl_DupInternalRepProc) _ANSI_ARGS_((struct Tcl_Obj *srcPtr,

        struct Tcl_Obj *dupPtr));

typedef int (Tcl_EventProc) _ANSI_ARGS_((Tcl_Event *evPtr, int flags));

typedef void (Tcl_EventCheckProc) _ANSI_ARGS_((ClientData clientData,

        int flags));

typedef int (Tcl_EventDeleteProc) _ANSI_ARGS_((Tcl_Event *evPtr,

        ClientData clientData));

typedef void (Tcl_EventSetupProc) _ANSI_ARGS_((ClientData clientData,

        int flags));

typedef void (Tcl_ExitProc) _ANSI_ARGS_((ClientData clientData));

typedef void (Tcl_FileProc) _ANSI_ARGS_((ClientData clientData, int mask));

typedef void (Tcl_FileFreeProc) _ANSI_ARGS_((ClientData clientData));

typedef void (Tcl_FreeInternalRepProc) _ANSI_ARGS_((struct Tcl_Obj *objPtr));

typedef void (Tcl_FreeProc) _ANSI_ARGS_((char *blockPtr));

typedef void (Tcl_IdleProc) _ANSI_ARGS_((ClientData clientData));

typedef void (Tcl_InterpDeleteProc) _ANSI_ARGS_((ClientData clientData,

        Tcl_Interp *interp));

typedef int (Tcl_MathProc) _ANSI_ARGS_((ClientData clientData,

        Tcl_Interp *interp, Tcl_Value *args, Tcl_Value *resultPtr));

typedef void (Tcl_NamespaceDeleteProc) _ANSI_ARGS_((ClientData clientData));

typedef int (Tcl_ObjCmdProc) _ANSI_ARGS_((ClientData clientData,

        Tcl_Interp *interp, int objc, struct Tcl_Obj * CONST objv[]));

typedef int (Tcl_PackageInitProc) _ANSI_ARGS_((Tcl_Interp *interp));

typedef void (Tcl_TcpAcceptProc) _ANSI_ARGS_((ClientData callbackData,

        Tcl_Channel chan, char *address, int port));

typedef void (Tcl_TimerProc) _ANSI_ARGS_((ClientData clientData));

typedef int (Tcl_SetFromAnyProc) _ANSI_ARGS_((Tcl_Interp *interp,

        struct Tcl_Obj *objPtr));

typedef void (Tcl_UpdateStringProc) _ANSI_ARGS_((struct Tcl_Obj *objPtr));

typedef char *(Tcl_VarTraceProc) _ANSI_ARGS_((ClientData clientData,

        Tcl_Interp *interp, char *part1, char *part2, int flags));

/*

 * The following structure represents a type of object, which is a

 * particular internal representation for an object plus a set of

 * procedures that provide standard operations on objects of that type.

 */

typedef struct Tcl_ObjType {

    char *name;                 /* Name of the type, e.g. "int". */

    Tcl_FreeInternalRepProc *freeIntRepProc;

                                /* Called to free any storage for the type's

                                 * internal rep. NULL if the internal rep

                                 * does not need freeing. */

    Tcl_DupInternalRepProc *dupIntRepProc;

                                /* Called to create a new object as a copy

                                 * of an existing object. */

    Tcl_UpdateStringProc *updateStringProc;

                                /* Called to update the string rep from the

                                 * type's internal representation. */

    Tcl_SetFromAnyProc *setFromAnyProc;

                                /* Called to convert the object's internal

                                 * rep to this type. Frees the internal rep

                                 * of the old type. Returns TCL_ERROR on

                                 * failure. */

} Tcl_ObjType;

/*

 * One of the following structures exists for each object in the Tcl

 * system. An object stores a value as either a string, some internal

 * representation, or both.

 */

typedef struct Tcl_Obj {

    int refCount;               /* When 0 the object will be freed. */

    char *bytes;                /* This points to the first byte of the

                                 * object's string representation. The array

                                 * must be followed by a null byte (i.e., at

                                 * offset length) but may also contain

                                 * embedded null characters. The array's

                                 * storage is allocated by ckalloc. NULL

                                 * means the string rep is invalid and must

                                 * be regenerated from the internal rep.

                                 * Clients should use Tcl_GetStringFromObj

                                 * to get a pointer to the byte array as a

                                 * readonly value. */

    int length;                 /* The number of bytes at *bytes, not

                                 * including the terminating null. */

    Tcl_ObjType *typePtr;       /* Denotes the object's type. Always

                                 * corresponds to the type of the object's

                                 * internal rep. NULL indicates the object

                                 * has no internal rep (has no type). */

    union {                     /* The internal representation: */

        long longValue;         /*   - an long integer value */

        double doubleValue;     /*   - a double-precision floating value */

        VOID *otherValuePtr;    /*   - another, type-specific value */

        struct {                /*   - internal rep as two pointers */

            VOID *ptr1;

            VOID *ptr2;

        } twoPtrValue;

    } internalRep;

} Tcl_Obj;

/*

 * Macros to increment and decrement a Tcl_Obj's reference count, and to

 * test whether an object is shared (i.e. has reference count > 1).

 * Note: clients should use Tcl_DecrRefCount() when they are finished using

 * an object, and should never call TclFreeObj() directly. TclFreeObj() is

 * only defined and made public in tcl.h to support Tcl_DecrRefCount's macro

 * definition. Note also that Tcl_DecrRefCount() refers to the parameter

 * "obj" twice. This means that you should avoid calling it with an

 * expression that is expensive to compute or has side effects.

 */

EXTERN void             Tcl_IncrRefCount _ANSI_ARGS_((Tcl_Obj *objPtr));

EXTERN void             Tcl_DecrRefCount _ANSI_ARGS_((Tcl_Obj *objPtr));

EXTERN int              Tcl_IsShared _ANSI_ARGS_((Tcl_Obj *objPtr));

#ifdef TCL_MEM_DEBUG

#   define Tcl_IncrRefCount(objPtr) \

        Tcl_DbIncrRefCount(objPtr, __FILE__, __LINE__)

#   define Tcl_DecrRefCount(objPtr) \

        Tcl_DbDecrRefCount(objPtr, __FILE__, __LINE__)

#   define Tcl_IsShared(objPtr) \

        Tcl_DbIsShared(objPtr, __FILE__, __LINE__)

#else

#   define Tcl_IncrRefCount(objPtr) \

        ++(objPtr)->refCount

#   define Tcl_DecrRefCount(objPtr) \

        if (--(objPtr)->refCount <= 0) TclFreeObj(objPtr)

#   define Tcl_IsShared(objPtr) \

        ((objPtr)->refCount > 1)

#endif

/*

 * Macros and definitions that help to debug the use of Tcl objects.

 * When TCL_MEM_DEBUG is defined, the Tcl_New* declarations are

 * overridden to call debugging versions of the object creation procedures.

 */

EXTERN Tcl_Obj *        Tcl_NewBooleanObj _ANSI_ARGS_((int boolValue));

EXTERN Tcl_Obj *        Tcl_NewDoubleObj _ANSI_ARGS_((double doubleValue));

EXTERN Tcl_Obj *        Tcl_NewIntObj _ANSI_ARGS_((int intValue));

EXTERN Tcl_Obj *        Tcl_NewListObj _ANSI_ARGS_((int objc,

                            Tcl_Obj *CONST objv[]));

EXTERN Tcl_Obj *        Tcl_NewLongObj _ANSI_ARGS_((long longValue));

EXTERN Tcl_Obj *        Tcl_NewObj _ANSI_ARGS_((void));

EXTERN Tcl_Obj *        Tcl_NewStringObj _ANSI_ARGS_((char *bytes,

                            int length));

#ifdef TCL_MEM_DEBUG

#  define Tcl_NewBooleanObj(val) \

     Tcl_DbNewBooleanObj(val, __FILE__, __LINE__)

#  define Tcl_NewDoubleObj(val) \

     Tcl_DbNewDoubleObj(val, __FILE__, __LINE__)

#  define Tcl_NewIntObj(val) \

     Tcl_DbNewLongObj(val, __FILE__, __LINE__)

#  define Tcl_NewListObj(objc, objv) \

     Tcl_DbNewListObj(objc, objv, __FILE__, __LINE__)

#  define Tcl_NewLongObj(val) \

     Tcl_DbNewLongObj(val, __FILE__, __LINE__)

#  define Tcl_NewObj() \

     Tcl_DbNewObj(__FILE__, __LINE__)

#  define Tcl_NewStringObj(bytes, len) \

     Tcl_DbNewStringObj(bytes, len, __FILE__, __LINE__)

#endif /* TCL_MEM_DEBUG */

/*

 * The following definitions support Tcl's namespace facility.

 * Note: the first five fields must match exactly the fields in a

 * Namespace structure (see tcl.h).

 */

typedef struct Tcl_Namespace {

    char *name;                 /* The namespace's name within its parent

                                 * namespace. This contains no ::'s. The

                                 * name of the global namespace is ""

                                 * although "::" is an synonym. */

    char *fullName;             /* The namespace's fully qualified name.

                                 * This starts with ::. */

    ClientData clientData;      /* Arbitrary value associated with this

                                 * namespace. */

    Tcl_NamespaceDeleteProc* deleteProc;

                                /* Procedure invoked when deleting the

                                 * namespace to, e.g., free clientData. */

    struct Tcl_Namespace* parentPtr;

                                /* Points to the namespace that contains

                                 * this one. NULL if this is the global

                                 * namespace. */

} Tcl_Namespace;

/*

 * The following structure represents a call frame, or activation record.

 * A call frame defines a naming context for a procedure call: its local

 * scope (for local variables) and its namespace scope (used for non-local

 * variables; often the global :: namespace). A call frame can also define

 * the naming context for a namespace eval or namespace inscope command:

 * the namespace in which the command's code should execute. The

 * Tcl_CallFrame structures exist only while procedures or namespace

 * eval/inscope's are being executed, and provide a Tcl call stack.

 *

 * A call frame is initialized and pushed using Tcl_PushCallFrame and

 * popped using Tcl_PopCallFrame. Storage for a Tcl_CallFrame must be

 * provided by the Tcl_PushCallFrame caller, and callers typically allocate

 * them on the C call stack for efficiency. For this reason, Tcl_CallFrame

 * is defined as a structure and not as an opaque token. However, most

 * Tcl_CallFrame fields are hidden since applications should not access

 * them directly; others are declared as "dummyX".

 *

 * WARNING!! The structure definition must be kept consistent with the

 * CallFrame structure in tclInt.h. If you change one, change the other.

 */

typedef struct Tcl_CallFrame {

    Tcl_Namespace *nsPtr;

    int dummy1;

    int dummy2;

    char *dummy3;

    char *dummy4;

    char *dummy5;

    int dummy6;

    char *dummy7;

    char *dummy8;

    int dummy9;

    char* dummy10;

} Tcl_CallFrame;

/*

 * Information about commands that is returned by Tcl_GetCommandInfo and

 * passed to Tcl_SetCommandInfo. objProc is an objc/objv object-based

 * command procedure while proc is a traditional Tcl argc/argv

 * string-based procedure. Tcl_CreateObjCommand and Tcl_CreateCommand

 * ensure that both objProc and proc are non-NULL and can be called to

 * execute the command. However, it may be faster to call one instead of

 * the other. The member isNativeObjectProc is set to 1 if an

 * object-based procedure was registered by Tcl_CreateObjCommand, and to

 * 0 if a string-based procedure was registered by Tcl_CreateCommand.

 * The other procedure is typically set to a compatibility wrapper that

 * does string-to-object or object-to-string argument conversions then

 * calls the other procedure.

 */

typedef struct Tcl_CmdInfo {

    int isNativeObjectProc;      /* 1 if objProc was registered by a call to

                                  * Tcl_CreateObjCommand; 0 otherwise.

                                  * Tcl_SetCmdInfo does not modify this

                                  * field. */

    Tcl_ObjCmdProc *objProc;     /* Command's object-based procedure. */

    ClientData objClientData;    /* ClientData for object proc. */

    Tcl_CmdProc *proc;           /* Command's string-based procedure. */

    ClientData clientData;       /* ClientData for string proc. */

    Tcl_CmdDeleteProc *deleteProc;

                                 /* Procedure to call when command is

                                  * deleted. */

    ClientData deleteData;       /* Value to pass to deleteProc (usually

                                  * the same as clientData). */

    Tcl_Namespace *namespacePtr; /* Points to the namespace that contains

                                  * this command. Note that Tcl_SetCmdInfo

                                  * will not change a command's namespace;

                                  * use Tcl_RenameCommand to do that. */

} Tcl_CmdInfo;

/*

 * The structure defined below is used to hold dynamic strings.  The only

 * field that clients should use is the string field, and they should

 * never modify it.

 */

#define TCL_DSTRING_STATIC_SIZE 200

typedef struct Tcl_DString {

    char *string;               /* Points to beginning of string:  either

                                 * staticSpace below or a malloced array. */

    int length;                 /* Number of non-NULL characters in the

                                 * string. */

    int spaceAvl;               /* Total number of bytes available for the

                                 * string and its terminating NULL char. */

    char staticSpace[TCL_DSTRING_STATIC_SIZE];

                                /* Space to use in common case where string

                                 * is small. */

} Tcl_DString;

#define Tcl_DStringLength(dsPtr) ((dsPtr)->length)

#define Tcl_DStringValue(dsPtr) ((dsPtr)->string)

#define Tcl_DStringTrunc Tcl_DStringSetLength

/*

 * Definitions for the maximum number of digits of precision that may

 * be specified in the "tcl_precision" variable, and the number of

 * characters of buffer space required by Tcl_PrintDouble.

 */

#define TCL_MAX_PREC 17

#define TCL_DOUBLE_SPACE (TCL_MAX_PREC+10)

/*

 * Flag that may be passed to Tcl_ConvertElement to force it not to

 * output braces (careful!  if you change this flag be sure to change

 * the definitions at the front of tclUtil.c).

 */

#define TCL_DONT_USE_BRACES     1

/*

 * Flag that may be passed to Tcl_GetIndexFromObj to force it to disallow

 * abbreviated strings.

 */

#define TCL_EXACT       1

/*

 * Flag values passed to Tcl_RecordAndEval.

 * WARNING: these bit choices must not conflict with the bit choices

 * for evalFlag bits in tclInt.h!!

 */

#define TCL_NO_EVAL             0x10000

#define TCL_EVAL_GLOBAL         0x20000

/*

 * Special freeProc values that may be passed to Tcl_SetResult (see

 * the man page for details):

 */

#define TCL_VOLATILE    ((Tcl_FreeProc *) 1)

#define TCL_STATIC      ((Tcl_FreeProc *) 0)

#define TCL_DYNAMIC     ((Tcl_FreeProc *) 3)

/*

 * Flag values passed to variable-related procedures.

 */

#define TCL_GLOBAL_ONLY          1

#define TCL_NAMESPACE_ONLY       2

#define TCL_APPEND_VALUE         4

#define TCL_LIST_ELEMENT         8

#define TCL_TRACE_READS          0x10

#define TCL_TRACE_WRITES         0x20

#define TCL_TRACE_UNSETS         0x40

#define TCL_TRACE_DESTROYED      0x80

#define TCL_INTERP_DESTROYED     0x100

#define TCL_LEAVE_ERR_MSG        0x200

#define TCL_PARSE_PART1          0x400

/*

 * Types for linked variables:

 */

#define TCL_LINK_INT            1

#define TCL_LINK_DOUBLE         2

#define TCL_LINK_BOOLEAN        3

#define TCL_LINK_STRING         4

#define TCL_LINK_READ_ONLY      0x80

/*

 * The following declarations either map ckalloc and ckfree to

 * malloc and free, or they map them to procedures with all sorts

 * of debugging hooks defined in tclCkalloc.c.

 */

EXTERN char *           Tcl_Alloc _ANSI_ARGS_((unsigned int size));

EXTERN void             Tcl_Free _ANSI_ARGS_((char *ptr));

EXTERN char *           Tcl_Realloc _ANSI_ARGS_((char *ptr,

                            unsigned int size));

#ifdef TCL_MEM_DEBUG

#  define Tcl_Alloc(x) Tcl_DbCkalloc(x, __FILE__, __LINE__)

#  define Tcl_Free(x)  Tcl_DbCkfree(x, __FILE__, __LINE__)

#  define Tcl_Realloc(x,y) Tcl_DbCkrealloc((x), (y),__FILE__, __LINE__)

#  define ckalloc(x) Tcl_DbCkalloc(x, __FILE__, __LINE__)

#  define ckfree(x)  Tcl_DbCkfree(x, __FILE__, __LINE__)

#  define ckrealloc(x,y) Tcl_DbCkrealloc((x), (y),__FILE__, __LINE__)

EXTERN int              Tcl_DumpActiveMemory _ANSI_ARGS_((char *fileName));

EXTERN void             Tcl_ValidateAllMemory _ANSI_ARGS_((char *file,

                            int line));

#else

/* CYGNUS LOCAL: Always use TCLALLOC.  This means that calls to malloc

   will always be checked to make sure that malloc succeeded.

   NOTE: In tcl8.1a2, the definition of TclpAlloc was removed from

   unix/tclUnixPort.h.  That means that in tcl8.1a2, this will wind up

   calling the special allocator in tclAlloc.c, which would be bad.

   When tcl 8.1 is imported, this needs to be checked.  */

#ifndef USE_TCLALLOC

#define USE_TCLALLOC 1

#endif

/* END CYGNUS LOCAL */

#  if USE_TCLALLOC

#     define ckalloc(x) Tcl_Alloc(x)

#     define ckfree(x) Tcl_Free(x)

#     define ckrealloc(x,y) Tcl_Realloc(x,y)

#  else

#     define ckalloc(x) malloc(x)

#     define ckfree(x)  free(x)

#     define ckrealloc(x,y) realloc(x,y)

#  endif

#  define Tcl_DumpActiveMemory(x)

#  define Tcl_ValidateAllMemory(x,y)

#endif /* TCL_MEM_DEBUG */

/*

 * Forward declaration of Tcl_HashTable.  Needed by some C++ compilers

 * to prevent errors when the forward reference to Tcl_HashTable is

 * encountered in the Tcl_HashEntry structure.

 */

#ifdef __cplusplus

struct Tcl_HashTable;

#endif

/*

 * Structure definition for an entry in a hash table.  No-one outside

 * Tcl should access any of these fields directly;  use the macros

 * defined below.

 */