URL https://opencores.org/ocsvn/or1k/or1k/trunk
Subversion Repositories or1k

[/] [or1k/] [trunk/] [insight/] [tcl/] [tests/] [io.test] - Blame information for rev 1765

Details | Compare with Previous | View Log

# Functionality covered: operation of all IO commands, and all procedures
# defined in generic/tclIO.c.
#
# This file contains a collection of tests for one or more of the Tcl
# built-in commands.  Sourcing this file into Tcl runs the tests and
# generates output for errors.  No output means no errors were found.
#
# Copyright (c) 1991-1994 The Regents of the University of California.
# Copyright (c) 1994-1997 Sun Microsystems, Inc.
#
# See the file "license.terms" for information on usage and redistribution
# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
#
# RCS: @(#) $Id: io.test,v 1.1.1.1 2002-01-16 10:25:36 markom Exp $
 
if {[string compare test [info procs test]] == 1} then {source defs}
 
if {"[info commands testchannel]" != "testchannel"} {
    puts "Skipping io tests. This application does not seem to have the"
    puts "testchannel command that is needed to run these tests."
    return
}
 
removeFile test1
removeFile pipe
 
# set up a long data file for some of the following tests
 
set f [open longfile w]
fconfigure $f -eofchar {} -translation lf
for { set i 0 } { $i < 100 } { incr i} {
    puts $f "#123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef
\#123456789abcdef01
\#"
    }
close $f
 
set f [open cat w]
puts $f {
    if {$argv == {}} {
        set argv -
    }
    foreach name $argv {
        if {$name == "-"} {
            set f stdin
        } elseif {[catch {open $name r} f] != 0} {
            puts stderr $f
            continue
        }
        while {[eof $f] == 0} {
            puts -nonewline stdout [read $f]
        }
        if {$f != "stdin"} {
            close $f
        }
    }
}
close $f
 
# These tests are disabled until we decide what to do with "unsupported0".
#
#test io-1.7 {unsupported0 command} {
#    removeFile test1
#    set f1 [open iocmd.test]
#    set f2 [open test1 w]
#    unsupported0 $f1 $f2
#    close $f1
#    catch {close $f2}
#    set s1 [file size [info script]]
#    set s2 [file size test1]
#    set x ok
#    if {"$s1" != "$s2"} {
#        set x broken
#    }
#    set x
#} ok
#test io-1.8 {unsupported0 command} {
#    removeFile test1
#    set f1 [open [info script]]
#    set f2 [open test1 w]
#    unsupported0 $f1 $f2 40
#    close $f1
#    close $f2
#    file size test1
#} 40
#test io-1.9 {unsupported0 command} {
#    removeFile test1
#    set f1 [open [info script]]
#    set f2 [open test1 w]
#    unsupported0 $f1 $f2 -1
#    close $f1
#    close $f2
#    set x ok
#    set s1 [file size [info script]]
#    set s2 [file size test1]
#    if {$s1 != $s2} {
#        set x broken
#    }
#    set x
#} ok
#test io-1.10 {unsupported0 command} {unixOrPc} {
#    removeFile pipe
#    removeFile test1
#    set f1 [open pipe w]
#    puts $f1 {puts ready}
#    puts $f1 {gets stdin}
#    puts $f1 {set f1 [open [info script] r]}
#    puts $f1 {puts [read $f1 100]}
#    puts $f1 {close $f1}
#    close $f1
#    set f1 [open "|[list $tcltest pipe]" r+]
#    gets $f1
#    puts $f1 ready
#    flush $f1
#    set f2 [open test1 w]
#    set c [unsupported0 $f1 $f2 40]
#    catch {close $f1}
#    close $f2
#    set s1 [file size test1]
#    set x ok
#    if {$s1 != "40"} {
#        set x broken
#    }
#    list $c $x
#} {40 ok}
 
# Test standard handle management. The functions tested are
# Tcl_SetStdChannel and Tcl_GetStdChannel. Incidentally we are
# also testing channel table management.
 
if {$tcl_platform(platform) == "macintosh"} {
    set consoleFileNames [list console0 console1 console2]
} else {
    set consoleFileNames [lsort [testchannel open]]
}
test io-1.1 {Tcl_SetStdChannel and Tcl_GetStdChannel} {
    set l ""
    lappend l [fconfigure stdin -buffering]
    lappend l [fconfigure stdout -buffering]
    lappend l [fconfigure stderr -buffering]
    lappend l [lsort [testchannel open]]
    set l
} [list line line none $consoleFileNames]
test io-1.2 {Tcl_SetStdChannel and Tcl_GetStdChannel} {
    interp create x
    set l ""
    lappend l [x eval {fconfigure stdin -buffering}]
    lappend l [x eval {fconfigure stdout -buffering}]
    lappend l [x eval {fconfigure stderr -buffering}]
    interp delete x
    set l
} {line line none}
test io-1.3 {Tcl_SetStdChannel & Tcl_GetStdChannel} {stdio} {
    set f [open test1 w]
    puts $f {
        close stdin
        close stdout
        close stderr
        set f [open test1 r]
        set f2 [open test2 w]
        set f3 [open test3 w]
        puts stdout [gets stdin]
        puts stdout out
        puts stderr err
        close $f
        close $f2
        close $f3
    }
    close $f
    set result [exec $tcltest test1]
    set f [open test2 r]
    set f2 [open test3 r]
    lappend result [read $f] [read $f2]
    close $f
    close $f2
    set result
} {{
out
} {err
}}
# This test relies on the fact that the smallest available fd is used first.
test io-1.4 {Tcl_SetStdChannel & Tcl_GetStdChannel} {unixOnly} {
    set f [open test1 w]
    puts $f { close stdin
        close stdout
        close stderr
        set f [open test1 r]
        set f2 [open test2 w]
        set f3 [open test3 w]
        puts stdout [gets stdin]
        puts stdout $f2
        puts stderr $f3
        close $f
        close $f2
        close $f3
    }
    close $f
    set result [exec $tcltest test1]
    set f [open test2 r]
    set f2 [open test3 r]
    lappend result [read $f] [read $f2]
    close $f
    close $f2
    set result
} {{ close stdin
file1
} {file2
}}
catch {interp delete z}
test io-1.5 {Tcl_GetChannel: stdio name translation} {
    interp create z
    eof stdin
    catch {z eval flush stdin} msg1
    catch {z eval close stdin} msg2
    catch {z eval flush stdin} msg3
    set result [list $msg1 $msg2 $msg3]
    interp delete z
    set result
} {{channel "stdin" wasn't opened for writing} {} {can not find channel named "stdin"}}
test io-1.6 {Tcl_GetChannel: stdio name translation} {
    interp create z
    eof stdout
    catch {z eval flush stdout} msg1
    catch {z eval close stdout} msg2
    catch {z eval flush stdout} msg3
    set result [list $msg1 $msg2 $msg3]
    interp delete z
    set result
} {{} {} {can not find channel named "stdout"}}
test io-1.7 {Tcl_GetChannel: stdio name translation} {
    interp create z
    eof stderr
    catch {z eval flush stderr} msg1
    catch {z eval close stderr} msg2
    catch {z eval flush stderr} msg3
    set result [list $msg1 $msg2 $msg3]
    interp delete z
    set result
} {{} {} {can not find channel named "stderr"}}
test io-1.8 {reuse of stdio special channels} {unixOnly} {
    removeFile script
    removeFile test1
    set f [open script w]
    puts $f {
        close stderr
        set f [open test1 w]
        puts stderr hello
        close $f
        set f [open test1 r]
        puts [gets $f]
    }
    close $f
    set f [open "|[list $tcltest script]" r]
    set c [gets $f]
    close $f
    set c
} hello
test io-1.9 {reuse of stdio special channels} {stdio} {
    removeFile script
    removeFile test1
    set f [open script w]
    puts $f {
        set f [open test1 w]
        puts $f hello
        close $f
        close stderr
        set f [open "|[list [info nameofexecutable] cat test1]" r]
        puts [gets $f]
    }
    close $f
    set f [open "|[list $tcltest script]" r]
    set c [gets $f]
    close $f
    set c
} hello
 
# Must add test function for testing Tcl_CreateCloseHandler and
# Tcl_DeleteCloseHandler.
 
# Test channel table management. The functions tested are
# GetChannelTable, DeleteChannelTable, Tcl_RegisterChannel,
# Tcl_UnregisterChannel, Tcl_GetChannel and Tcl_CreateChannel.
#
# These functions use "eof stdin" to ensure that the standard
# channels are added to the channel table of the interpreter.
 
#
# CYGNUS LOCAL:
# I open tclConfig.sh to get the correct paths if I am not in the install
# directory.  This increments the refcount on the stdin WHEN the interpreter
# is created, not when you call eof stdin in the child.  Because of this, I
# had to change the first value in the results for tests 2.1, 2.2 & 2.3 from
# 0 to 1.  This is really a side issue, and does not affect what the tests
# were supposed to be looking for, however.
 
test io-2.1 {GetChannelTable, DeleteChannelTable on std handles} {
    set l1 [testchannel refcount stdin]
    eof stdin
    interp create x
    set l ""
    lappend l [expr [testchannel refcount stdin] - $l1]
    x eval {eof stdin}
    lappend l [expr [testchannel refcount stdin] - $l1]
    interp delete x
    lappend l [expr [testchannel refcount stdin] - $l1]
    set l
} {1 1 0}
test io-2.2 {GetChannelTable, DeleteChannelTable on std handles} {
    set l1 [testchannel refcount stdout]
    eof stdin
    interp create x
    set l ""
    lappend l [expr [testchannel refcount stdout] - $l1]
    x eval {eof stdout}
    lappend l [expr [testchannel refcount stdout] - $l1]
    interp delete x
    lappend l [expr [testchannel refcount stdout] - $l1]
    set l
} {1 1 0}
test io-2.3 {GetChannelTable, DeleteChannelTable on std handles} {
    set l1 [testchannel refcount stderr]
    eof stdin
    interp create x
    set l ""
    lappend l [expr [testchannel refcount stderr] - $l1]
    x eval {eof stderr}
    lappend l [expr [testchannel refcount stderr] - $l1]
    interp delete x
    lappend l [expr [testchannel refcount stderr] - $l1]
    set l
} {1 1 0}
test io-2.4 {Tcl_RegisterChannel, Tcl_UnregisterChannel} {
    removeFile test1
    set l ""
    set f [open test1 w]
    lappend l [lindex [testchannel info $f] 15]
    close $f
    if {[catch {lindex [testchannel info $f] 15} msg]} {
        lappend l $msg
    } else {
        lappend l "very broken: $f found after being closed"
    }
    string compare [string tolower $l] \
        [list 1 [format "can not find channel named \"%s\"" $f]]
} 0
test io-2.5 {Tcl_RegisterChannel, Tcl_UnregisterChannel} {
    removeFile test1
    set l ""
    set f [open test1 w]
    lappend l [lindex [testchannel info $f] 15]
    interp create x
    interp share "" $f x
    lappend l [lindex [testchannel info $f] 15]
    x eval close $f
    lappend l [lindex [testchannel info $f] 15]
    interp delete x
    lappend l [lindex [testchannel info $f] 15]
    close $f
    if {[catch {lindex [testchannel info $f] 15} msg]} {
        lappend l $msg
    } else {
        lappend l "very broken: $f found after being closed"
    }
    string compare [string tolower $l] \
        [list 1 2 1 1 [format "can not find channel named \"%s\"" $f]]
} 0
test io-2.6 {Tcl_RegisterChannel, Tcl_UnregisterChannel} {
    removeFile test1
    set l ""
    set f [open test1 w]
    lappend l [lindex [testchannel info $f] 15]
    interp create x
    interp share "" $f x
    lappend l [lindex [testchannel info $f] 15]
    interp delete x
    lappend l [lindex [testchannel info $f] 15]
    close $f
    if {[catch {lindex [testchannel info $f] 15} msg]} {
        lappend l $msg
    } else {
        lappend l "very broken: $f found after being closed"
    }
    string compare [string tolower $l] \
        [list 1 2 1 [format "can not find channel named \"%s\"" $f]]
} 0
test io-2.7 {Tcl_GetChannel->Tcl_GetStdChannel, standard handles} {
    eof stdin
} 0
test io-2.8 {testing Tcl_GetChannel, user opened handle} {
    removeFile test1
    set f [open test1 w]
    set x [eof $f]
    close $f
    set x
} 0
test io-2.9 {Tcl_GetChannel, channel not found} {
    list [catch {eof file34} msg] $msg
} {1 {can not find channel named "file34"}}
test io-2.10 {Tcl_CreateChannel, insertion into channel table} {
    removeFile test1
    set f [open test1 w]
    set l ""
    lappend l [eof $f]
    close $f
    if {[catch {lindex [testchannel info $f] 15} msg]} {
        lappend l $msg
    } else {
        lappend l "very broken: $f found after being closed"
    }
    string compare [string tolower $l] \
        [list 0 [format "can not find channel named \"%s\"" $f]]
} 0
 
# Test management of attributes associated with a channel, such as
# its default translation, its name and type, etc. The functions
# tested in this group are Tcl_GetChannelName,
# Tcl_GetChannelType and Tcl_GetChannelFile. Tcl_GetChannelInstanceData
# not tested because files do not use the instance data.
 
test io-3.1 {Tcl_GetChannelName} {
    removeFile test1
    set f [open test1 w]
    set n [testchannel name $f]
    close $f
    string compare $n $f
} 0
test io-3.2 {Tcl_GetChannelType} {
    removeFile test1
    set f [open test1 w]
    set t [testchannel type $f]
    close $f
    string compare $t file
} 0
test io-3.3 {Tcl_GetChannelFile, input} {
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar {}
    puts $f "1234567890\n098765432"
    close $f
    set f [open test1 r]
    gets $f
    set l ""
    lappend l [testchannel inputbuffered $f]
    lappend l [tell $f]
    close $f
    set l
} {10 11}
test io-3.4 {Tcl_GetChannelFile, output} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts $f hello
    set l ""
    lappend l [testchannel outputbuffered $f]
    lappend l [tell $f]
    flush $f
    lappend l [testchannel outputbuffered $f]
    lappend l [tell $f]
    close $f
    removeFile test1
    set l
} {6 6 0 6}
 
# Test flushing. The functions tested here are FlushChannel.
 
test io-4.1 {FlushChannel, no output buffered} {
    removeFile test1
    set f [open test1 w]
    flush $f
    set s [file size test1]
    close $f
    set s
} 0
test io-4.2 {FlushChannel, some output buffered} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar {}
    set l ""
    puts $f hello
    lappend l [file size test1]
    flush $f
    lappend l [file size test1]
    close $f
    lappend l [file size test1]
    set l
} {0 6 6}
test io-4.3 {FlushChannel, implicit flush on close} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar {}
    set l ""
    puts $f hello
    lappend l [file size test1]
    close $f
    lappend l [file size test1]
    set l
} {0 6}
test io-4.4 {FlushChannel, implicit flush when buffer fills} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar {}
    fconfigure $f -buffersize 60
    set l ""
    lappend l [file size test1]
    for {set i 0} {$i < 12} {incr i} {
        puts $f hello
    }
    lappend l [file size test1]
    flush $f
    lappend l [file size test1]
    close $f
    set l
} {0 60 72}
test io-4.5 {FlushChannel, implicit flush when buffer fills and on close} {unixOrPc} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -buffersize 60 -eofchar {}
    set l ""
    lappend l [file size test1]
    for {set i 0} {$i < 12} {incr i} {
        puts $f hello
    }
    lappend l [file size test1]
    close $f
    lappend l [file size test1]
    set l
} {0 60 72}
test io-4.6 {FlushChannel, async flushing, async close} {stdio && asyncPipeClose} {
    removeFile pipe
    removeFile output
    set f [open pipe w]
    puts $f {
        set f [open output w]
        fconfigure $f -translation lf -buffering none -eofchar {}
        while {![eof stdin]} {
            after 20
            puts -nonewline $f [read stdin 1024]
        }
        close $f
    }
    close $f
    set x 01234567890123456789012345678901
    for {set i 0} {$i < 11} {incr i} {
        set x "$x$x"
    }
    set f [open output w]
    close $f
    set f [open "|[list $tcltest pipe]" w]
    fconfigure $f -blocking off
    puts -nonewline $f $x
    close $f
    set counter 0
    while {([file size output] < 65536) && ($counter < 1000)} {
        incr counter
        after 20
        update
    }
    if {$counter == 1000} {
        set result probably_broken
    } else {
        set result ok
    }
} ok
 
# Tests closing a channel. The functions tested are CloseChannel and Tcl_Close.
 
test io-5.1 {CloseChannel called when all references are dropped} {
    removeFile test1
    set f [open test1 w]
    interp create x
    interp share "" $f x
    set l ""
    lappend l [testchannel refcount $f]
    x eval close $f
    interp delete x
    lappend l [testchannel refcount $f]
    close $f
    set l
} {2 1}
test io-5.2 {CloseChannel called when all references are dropped} {
    removeFile test1
    set f [open test1 w]
    interp create x
    interp share "" $f x
    puts -nonewline $f abc
    close $f
    x eval puts $f def
    x eval close $f
    interp delete x
    set f [open test1 r]
    set l [gets $f]
    close $f
    set l
} abcdef
test io-5.3 {CloseChannel, not called before output queue is empty} {unixOrPc asyncPipeClose nonPortable tempNotPc} {
    removeFile pipe
    removeFile output
    set f [open pipe w]
    puts $f {
 
        # Need to not have eof char appended on close, because the other
        # side of the pipe already closed, so that writing would cause an
        # error "invalid file".
 
        fconfigure stdout -eofchar {}
        fconfigure stderr -eofchar {}
 
        set f [open output w]
        fconfigure $f -translation lf -buffering none
        for {set x 0} {$x < 20} {incr x} {
            after 20
            puts -nonewline $f [read stdin 1024]
        }
        close $f
    }
    close $f
    set x 01234567890123456789012345678901
    for {set i 0} {$i < 11} {incr i} {
        set x "$x$x"
    }
    set f [open output w]
    close $f
    set f [open "|[list $tcltest pipe]" r+]
    fconfigure $f -blocking off -eofchar {}
 
    # Under windows, the first 24576 bytes of $x are copied to $f, and
    # then the writing fails.
 
    puts -nonewline $f $x
    close $f
    set counter 0
    while {([file size output] < 20480) && ($counter < 1000)} {
        incr counter
        after 20
        update
    }
    if {$counter == 1000} {
        set result probably_broken
    } else {
        set result ok
    }
} ok
test io-5.4 {Tcl_Close} {
    removeFile test1
    set l ""
    lappend l [lsort [testchannel open]]
    set f [open test1 w]
    lappend l [lsort [testchannel open]]
    close $f
    lappend l [lsort [testchannel open]]
    set x [list $consoleFileNames \
                [lsort [eval list $consoleFileNames $f]] \
                $consoleFileNames]
    string compare $l $x
} 0
test io-5.5 {Tcl_Close vs standard handles} {unixOnly} {
    removeFile script
    set f [open script w]
    puts $f {
        close stdin
        puts [testchannel open]
    }
    close $f
    set f [open "|[list $tcltest script]" r]
    set l [gets $f]
    close $f
    set l
} {file1 file2}
 
# Test output on channels. The functions tested are Tcl_Write
# and Tcl_Flush.
 
test io-6.1 {Tcl_Write, channel not writable} {
    list [catch {puts stdin hello} msg] $msg
} {1 {channel "stdin" wasn't opened for writing}}
test io-6.2 {Tcl_Write, empty string} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -eofchar {}
    puts -nonewline $f ""
    close $f
    file size test1
} 0
test io-6.3 {Tcl_Write, nonempty string} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -eofchar {}
    puts -nonewline $f hello
    close $f
    file size test1
} 5
test io-6.4 {Tcl_Write, buffering in full buffering mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -buffering full -eofchar {}
    puts $f hello
    set l ""
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    flush $f
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    close $f
    set l
} {6 0 0 6}
test io-6.5 {Tcl_Write, buffering in line buffering mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -buffering line -eofchar {}
    puts -nonewline $f hello
    set l ""
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    puts $f hello
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    close $f
    set l
} {5 0 0 11}
test io-6.6 {Tcl_Write, buffering in no buffering mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -buffering none -eofchar {}
    puts -nonewline $f hello
    set l ""
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    puts $f hello
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    close $f
    set l
} {0 5 0 11}
test io-6.7 {Tcl_Flush, full buffering} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -buffering full -eofchar {}
    puts -nonewline $f hello
    set l ""
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    puts $f hello
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    flush $f
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    close $f
    set l
} {5 0 11 0 0 11}
test io-6.8 {Tcl_Flush, full buffering} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -buffering line
    puts -nonewline $f hello
    set l ""
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    flush $f
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    puts $f hello
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    flush $f
    lappend l [testchannel outputbuffered $f]
    lappend l [file size test1]
    close $f
    set l
} {5 0 0 5 0 11 0 11}
test io-6.9 {Tcl_Flush, channel not writable} {
    list [catch {flush stdin} msg] $msg
} {1 {channel "stdin" wasn't opened for writing}}
test io-6.10 {Tcl_Write, looping and buffering} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf -eofchar {}
    set f2 [open longfile r]
    for {set x 0} {$x < 10} {incr x} {
        puts $f1 [gets $f2]
    }
    close $f2
    close $f1
    file size test1
} 387
test io-6.11 {Tcl_Write, no newline, implicit flush} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -eofchar {}
    set f2 [open longfile r]
    for {set x 0} {$x < 10} {incr x} {
        puts -nonewline $f1 [gets $f2]
    }
    close $f1
    close $f2
    file size test1
} 377
test io-6.12 {Tcl_Write on a pipe} {stdio} {
    removeFile test1
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {
        set f1 [open longfile r]
        for {set x 0} {$x < 10} {incr x} {
            puts [gets $f1]
        }
    }
    close $f1
    set f1 [open "|[list $tcltest pipe]" r]
    set f2 [open longfile r]
    set y ok
    for {set x 0} {$x < 10} {incr x} {
        set l1 [gets $f1]
        set l2 [gets $f2]
        if {"$l1" != "$l2"} {
            set y broken
        }
    }
    close $f1
    close $f2
    set y
} ok
test io-6.13 {Tcl_Write to a pipe, line buffered} {stdio} {
    removeFile test1
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {
        puts [gets stdin]
        puts [gets stdin]
    }
    close $f1
    set y ok
    set f1 [open "|[list $tcltest pipe]" r+]
    fconfigure $f1 -buffering line
    set f2 [open longfile r]
    set line [gets $f2]
    puts $f1 $line
    set backline [gets $f1]
    if {"$line" != "$backline"} {
        set y broken
    }
    set line [gets $f2]
    puts $f1 $line
    set backline [gets $f1]
    if {"$line" != "$backline"} {
        set y broken
    }
    close $f1
    close $f2
    set y
} ok
test io-6.14 {Tcl_Write, buffering and implicit flush at close} {
    removeFile test3
    set f [open test3 w]
    puts -nonewline $f "Text1"
    puts -nonewline $f " Text 2"
    puts $f " Text 3"
    close $f
    set f [open test3 r]
    set x [gets $f]
    close $f
    set x
} {Text1 Text 2 Text 3}
test io-6.15 {Tcl_Flush, channel not open for writing} {
    removeFile test1
    set fd [open test1 w]
    close $fd
    set fd [open test1 r]
    set x [list [catch {flush $fd} msg] $msg]
    close $fd
    string compare $x \
        [list 1 "channel \"$fd\" wasn't opened for writing"]
} 0
test io-6.16 {Tcl_Flush on pipe opened only for reading} {stdio} {
    set fd [open "|[list $tcltest cat longfile]" r]
    set x [list [catch {flush $fd} msg] $msg]
    catch {close $fd}
    string compare $x \
        [list 1 "channel \"$fd\" wasn't opened for writing"]
} 0
test io-6.17 {Tcl_Write buffers, then Tcl_Flush flushes} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf
    puts $f1 hello
    puts $f1 hello
    puts $f1 hello
    flush $f1
    set x [file size test1]
    close $f1
    set x
} 18
test io-6.18 {Tcl_Write and Tcl_Flush intermixed} {
    removeFile test1
    set x ""
    set f1 [open test1 w]
    fconfigure $f1 -translation lf
    puts $f1 hello
    puts $f1 hello
    puts $f1 hello
    flush $f1
    lappend x [file size test1]
    puts $f1 hello
    flush $f1
    lappend x [file size test1]
    puts $f1 hello
    flush $f1
    lappend x [file size test1]
    close $f1
    set x
} {18 24 30}
test io-6.19 {Explicit and implicit flushes} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf -eofchar {}
    set x ""
    puts $f1 hello
    puts $f1 hello
    puts $f1 hello
    flush $f1
    lappend x [file size test1]
    puts $f1 hello
    flush $f1
    lappend x [file size test1]
    puts $f1 hello
    close $f1
    lappend x [file size test1]
    set x
} {18 24 30}
test io-6.20 {Implicit flush when buffer is full} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf -eofchar {}
    set line "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789"
    for {set x 0} {$x < 100} {incr x} {
      puts $f1 $line
    }
    set z ""
    lappend z [file size test1]
    for {set x 0} {$x < 100} {incr x} {
        puts $f1 $line
    }
    lappend z [file size test1]
    close $f1
    lappend z [file size test1]
    set z
} {4096 12288 12600}
test io-6.21 {Tcl_Flush to pipe} {stdio} {
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {set x [read stdin 6]}
    puts $f1 {set cnt [string length $x]}
    puts $f1 {puts "read $cnt characters"}
    close $f1
    set f1 [open "|[list $tcltest pipe]" r+]
    puts $f1 hello
    flush $f1
    set x [gets $f1]
    catch {close $f1}
    set x
} "read 6 characters"
test io-6.22 {Tcl_Flush called at other end of pipe} {stdio} {
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {
        fconfigure stdout -buffering full
        puts hello
        puts hello
        flush stdout
        gets stdin
        puts bye
        flush stdout
    }
    close $f1
    set f1 [open "|[list $tcltest pipe]" r+]
    set x ""
    lappend x [gets $f1]
    lappend x [gets $f1]
    puts $f1 hello
    flush $f1
    lappend x [gets $f1]
    close $f1
    set x
} {hello hello bye}
test io-6.23 {Tcl_Flush and line buffering at end of pipe} {stdio} {
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {
        puts hello
        puts hello
        gets stdin
        puts bye
    }
    close $f1
    set f1 [open "|[list $tcltest pipe]" r+]
    set x ""
    lappend x [gets $f1]
    lappend x [gets $f1]
    puts $f1 hello
    flush $f1
    lappend x [gets $f1]
    close $f1
    set x
} {hello hello bye}
test io-6.24 {Tcl_Write and Tcl_Flush move end of file} {
    set f [open test3 w]
    puts $f "Line 1"
    puts $f "Line 2"
    set f2 [open test3]
    set x {}
    lappend x [read -nonewline $f2]
    close $f2
    flush $f
    set f2 [open test3]
    lappend x [read -nonewline $f2]
    close $f2
    close $f
    set x
} {{} {Line 1
Line 2}}
test io-6.25 {Implicit flush with Tcl_Flush to command pipelines} {stdio} {
    removeFile test3
    set f [open "|[list $tcltest cat | $tcltest cat > test3]" w]
    puts $f "Line 1"
    puts $f "Line 2"
    close $f
    after 100
    set f [open test3 r]
    set x [read $f]
    close $f
    set x
} {Line 1
Line 2
}
test io-6.26 {Tcl_Flush, Tcl_Write on bidirectional pipelines} {unixOrPc && unixExecs && tempNotPc} {
    set f [open "|[list cat -u]" r+]
    puts $f "Line1"
    flush $f
    set x [gets $f]
    close $f
    set x
} {Line1}
test io-6.27 {Tcl_Flush on closed pipeline} {stdio && tempNotPc} {
    removeFile pipe
    set f [open pipe w]
    puts $f {exit}
    close $f
    set f [open "|[list $tcltest pipe]" r+]
    gets $f
    puts $f output
    after 50
    #
    # The flush below will get a SIGPIPE. This is an expected part of
    # test and indicates that the test operates correctly. If you run
    # this test under a debugger, the signal will by intercepted unless
    # you disable the debugger's signal interception.
    #
    if {[catch {flush $f} msg]} {
        set x [list 1 $msg $errorCode]
        catch {close $f}
    } else {
        if {[catch {close $f} msg]} {
            set x [list 1 $msg $errorCode]
        } else {
            set x {this was supposed to fail and did not}
        }
    }
    regsub {".*":} $x {"":} x
    string tolower $x
} {1 {error flushing "": broken pipe} {posix epipe {broken pipe}}}
test io-6.28 {Tcl_Write, lf mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar {}
    puts $f hello\nthere\nand\nhere
    flush $f
    set s [file size test1]
    close $f
    set s
} 21
test io-6.29 {Tcl_Write, cr mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr -eofchar {}
    puts $f hello\nthere\nand\nhere
    close $f
    file size test1
} 21
test io-6.30 {Tcl_Write, crlf mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf -eofchar {}
    puts $f hello\nthere\nand\nhere
    close $f
    file size test1
} 25
test io-6.31 {Tcl_Write, background flush} {stdio} {
    removeFile pipe
    removeFile output
    set f [open pipe w]
    puts $f {set f [open output w]}
    puts $f {fconfigure $f -translation lf}
    set x [list while {![eof stdin]}]
    set x "$x {"
    puts $f $x
    puts $f {  puts -nonewline $f [read stdin 4096]}
    puts $f {  flush $f}
    puts $f "}"
    puts $f {close $f}
    close $f
    set x 01234567890123456789012345678901
    for {set i 0} {$i < 11} {incr i} {
        set x "$x$x"
    }
    set f [open output w]
    close $f
    set f [open "|[list $tcltest pipe]" r+]
    fconfigure $f -blocking off
    puts -nonewline $f $x
    close $f
    set counter 0
    while {([file size output] < 65536) && ($counter < 1000)} {
        incr counter
        after 5
        update
    }
    if {$counter == 1000} {
        set result probably_broken
    } else {
        set result ok
    }
} ok
test io-6.32 {Tcl_Write, background flush to slow reader} {stdio && asyncPipeClose} {
    removeFile pipe
    removeFile output
    set f [open pipe w]
    puts $f {set f [open output w]}
    puts $f {fconfigure $f -translation lf}
    set x [list while {![eof stdin]}]
    set x "$x {"
    puts $f $x
    puts $f {  after 20}
    puts $f {  puts -nonewline $f [read stdin 1024]}
    puts $f {  flush $f}
    puts $f "}"
    puts $f {close $f}
    close $f
    set x 01234567890123456789012345678901
    for {set i 0} {$i < 11} {incr i} {
        set x "$x$x"
    }
    set f [open output w]
    close $f
    set f [open "|[list $tcltest pipe]" r+]
    fconfigure $f -blocking off
    puts -nonewline $f $x
    close $f
    set counter 0
    while {([file size output] < 65536) && ($counter < 1000)} {
        incr counter
        after 20
        update
    }
    if {$counter == 1000} {
        set result probably_broken
    } else {
        set result ok
    }
} ok
test io-6.33 {Tcl_Flush, implicit flush on exit} {stdio} {
    set f [open script w]
    puts $f {
        set f [open test1 w]
        fconfigure $f -translation lf
        puts $f hello
        puts $f bye
        puts $f strange
    }
    close $f
    exec $tcltest script
    set f [open test1 r]
    set r [read $f]
    close $f
    set r
} {hello
bye
strange
}
 
test io-6.34 {Tcl_Close, async flush on close, using sockets} {socket tempNotMac} {
    set c 0
    set x running
    set l abcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyzabcdefghijklmnopqrstuvwxyz
    proc writelots {s l} {
        for {set i 0} {$i < 2000} {incr i} {
            puts $s $l
        }
    }
    proc accept {s a p} {
        global x
        fileevent $s readable [list readit $s]
        fconfigure $s -blocking off
        set x accepted
    }
    proc readit {s} {
        global c x
        set l [gets $s]
 
        if {[eof $s]} {
            close $s
            set x done
        } elseif {([string length $l] > 0) || ![fblocked $s]} {
            incr c
        }
    }
    set ss [socket -server accept 2828]
    set cs [socket [info hostname] 2828]
    vwait x
    fconfigure $cs -blocking off
    writelots $cs $l
    close $cs
    close $ss
    vwait x
    set c
} 2000
test io-6.35 {Tcl_Close vs fileevent vs multiple interpreters} {socket} {
    catch {interp delete x}
    catch {interp delete y}
    interp create x
    interp create y
    set s [socket -server accept 2828]
    proc accept {s a p} {
        puts $s hello
        close $s
    }
    set c [socket [info hostname] 2828]
    interp share {} $c x
    interp share {} $c y
    close $c
    x eval {
        proc readit {s} {
            gets $s
            if {[eof $s]} {
                close $s
            }
        }
    }
    y eval {
        proc readit {s} {
            gets $s
            if {[eof $s]} {
                close $s
            }
        }
    }
    x eval "fileevent $c readable \{readit $c\}"
    y eval "fileevent $c readable \{readit $c\}"
    y eval [list close $c]
    update
    close $s
    interp delete x
    interp delete y
} ""
 
# Test end of line translations. Procedures tested are Tcl_Write, Tcl_Read.
 
test io-7.1 {Tcl_Write lf, Tcl_Read lf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation lf
    set x [read $f]
    close $f
    set x
} "hello\nthere\nand\nhere\n"
test io-7.2 {Tcl_Write lf, Tcl_Read cr} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation cr
    set x [read $f]
    close $f
    set x
} "hello\nthere\nand\nhere\n"
test io-7.3 {Tcl_Write lf, Tcl_Read crlf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation crlf
    set x [read $f]
    close $f
    set x
} "hello\nthere\nand\nhere\n"
test io-7.4 {Tcl_Write cr, Tcl_Read cr} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation cr
    set x [read $f]
    close $f
    set x
} "hello\nthere\nand\nhere\n"
test io-7.5 {Tcl_Write cr, Tcl_Read lf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation lf
    set x [read $f]
    close $f
    set x
} "hello\rthere\rand\rhere\r"
test io-7.6 {Tcl_Write cr, Tcl_Read crlf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation crlf
    set x [read $f]
    close $f
    set x
} "hello\rthere\rand\rhere\r"
test io-7.7 {Tcl_Write crlf, Tcl_Read crlf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation crlf
    set x [read $f]
    close $f
    set x
} "hello\nthere\nand\nhere\n"
test io-7.8 {Tcl_Write crlf, Tcl_Read lf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation lf
    set x [read $f]
    close $f
    set x
} "hello\r\nthere\r\nand\r\nhere\r\n"
test io-7.9 {Tcl_Write crlf, Tcl_Read cr} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation cr
    set x [read $f]
    close $f
    set x
} "hello\n\nthere\n\nand\n\nhere\n\n"
test io-7.10 {Tcl_Write lf, Tcl_Read auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    set c [read $f]
    set x [fconfigure $f -translation]
    close $f
    list $c $x
} {{hello
there
and
here
} auto}
test io-7.11 {Tcl_Write cr, Tcl_Read auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    set c [read $f]
    set x [fconfigure $f -translation]
    close $f
    list $c $x
} {{hello
there
and
here
} auto}
test io-7.12 {Tcl_Write crlf, Tcl_Read auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    set c [read $f]
    set x [fconfigure $f -translation]
    close $f
    list $c $x
} {{hello
there
and
here
} auto}
 
test io-7.13 {Tcl_Write crlf on block boundary, Tcl_Read auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    set line "123456789ABCDE"   ;# 14 char plus crlf
    puts -nonewline $f x        ;# shift crlf across block boundary
    for {set i 0} {$i < 700} {incr i} {
        puts $f $line
    }
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto
    set c [read $f]
    close $f
    string length $c
} [expr 700*15+1]
 
test io-7.14 {Tcl_Write crlf on block boundary, Tcl_Read crlf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    set line "123456789ABCDE"   ;# 14 char plus crlf
    puts -nonewline $f x        ;# shift crlf across block boundary
    for {set i 0} {$i < 700} {incr i} {
        puts $f $line
    }
    close $f
    set f [open test1 r]
    fconfigure $f -translation crlf
    set c [read $f]
    close $f
    string length $c
} [expr 700*15+1]
 
test io-7.15 {Tcl_Write mixed, Tcl_Read auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts $f hello\nthere\nand\rhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto
    set c [read $f]
    close $f
    set c
} {hello
there
and
here
}
test io-7.16 {Tcl_Write ^Z at end, Tcl_Read auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts -nonewline $f hello\nthere\nand\rhere\n\x1a
    close $f
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation auto
    set c [read $f]
    close $f
    set c
} {hello
there
and
here
}
test io-7.17 {Tcl_Write, implicit ^Z at end, Tcl_Read auto} {pcOnly} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -eofchar \x1a -translation lf
    puts $f hello\nthere\nand\rhere
    close $f
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation auto
    set c [read $f]
    close $f
    set c
} {hello
there
and
here
}
test io-7.18 {Tcl_Write, ^Z in middle, Tcl_Read auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set s [format "abc\ndef\n%cghi\nqrs" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation auto
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {abc def 0 {} 1 {} 1}
test io-7.19 {Tcl_Write, ^Z no newline in middle, Tcl_Read auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set s [format "abc\ndef\n%cghi\nqrs" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation auto
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {abc def 0 {} 1 {} 1}
test io-7.20 {Tcl_Write, ^Z in middle ignored, Tcl_Read lf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar {}
    set s [format "abc\ndef\n%cghi\nqrs" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -translation lf -eofchar {}
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} "abc def 0 \x1aghi 0 qrs 0 {} 1"
test io-7.21 {Tcl_Write, ^Z in middle ignored, Tcl_Read cr} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar {}
    set s [format "abc\ndef\n%cghi\nqrs" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -translation cr -eofchar {}
    set l ""
    set x [gets $f]
    lappend l [string compare $x "abc\ndef\n\x1aghi\nqrs"]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {0 1 {} 1}
test io-7.22 {Tcl_Write, ^Z in middle ignored, Tcl_Read crlf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar {}
    set s [format "abc\ndef\n%cghi\nqrs" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -translation crlf -eofchar {}
    set l ""
    set x [gets $f]
    lappend l [string compare $x "abc\ndef\n\x1aghi\nqrs"]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {0 1 {} 1}
test io-7.23 {Tcl_Write lf, ^Z in middle, Tcl_Read auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set c [format abc\ndef\n%cqrs\ntuv 26]
    puts $f $c
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    set c [string length [read $f]]
    set e [eof $f]
    close $f
    list $c $e
} {8 1}
test io-7.24 {Tcl_Write lf, ^Z in middle, Tcl_Read lf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set c [format abc\ndef\n%cqrs\ntuv 26]
    puts $f $c
    close $f
    set f [open test1 r]
    fconfigure $f -translation lf -eofchar \x1a
    set c [string length [read $f]]
    set e [eof $f]
    close $f
    list $c $e
} {8 1}
test io-7.25 {Tcl_Write cr, ^Z in middle, Tcl_Read auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    set c [format abc\ndef\n%cqrs\ntuv 26]
    puts $f $c
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    set c [string length [read $f]]
    set e [eof $f]
    close $f
    list $c $e
} {8 1}
test io-7.26 {Tcl_Write cr, ^Z in middle, Tcl_Read cr} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    set c [format abc\ndef\n%cqrs\ntuv 26]
    puts $f $c
    close $f
    set f [open test1 r]
    fconfigure $f -translation cr -eofchar \x1a
    set c [string length [read $f]]
    set e [eof $f]
    close $f
    list $c $e
} {8 1}
test io-7.27 {Tcl_Write crlf, ^Z in middle, Tcl_Read auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    set c [format abc\ndef\n%cqrs\ntuv 26]
    puts $f $c
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    set c [string length [read $f]]
    set e [eof $f]
    close $f
    list $c $e
} {8 1}
test io-7.28 {Tcl_Write crlf, ^Z in middle, Tcl_Read crlf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    set c [format abc\ndef\n%cqrs\ntuv 26]
    puts $f $c
    close $f
    set f [open test1 r]
    fconfigure $f -translation crlf -eofchar \x1a
    set c [string length [read $f]]
    set e [eof $f]
    close $f
    list $c $e
} {8 1}
 
# Test end of line translations. Functions tested are Tcl_Write and Tcl_Gets.
 
test io-8.1 {Tcl_Write lf, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    set l ""
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    close $f
    set l
} {hello 6 auto there 12 auto}
test io-8.2 {Tcl_Write cr, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    set l ""
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    close $f
    set l
} {hello 6 auto there 12 auto}
test io-8.3 {Tcl_Write crlf, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    set l ""
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    close $f
    set l
} {hello 7 auto there 14 auto}
test io-8.4 {Tcl_Write lf, Tcl_Gets lf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation lf
    set l ""
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    close $f
    set l
} {hello 6 lf there 12 lf}
test io-8.5 {Tcl_Write lf, Tcl_Gets cr} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation cr
    set l ""
    lappend l [string length [gets $f]]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    close $f
    set l
} {20 21 cr 1 {} 21 cr 1}
test io-8.6 {Tcl_Write lf, Tcl_Gets crlf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation crlf
    set l ""
    lappend l [string length [gets $f]]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    close $f
    set l
} {20 21 crlf 1 {} 21 crlf 1}
test io-8.7 {Tcl_Write cr, Tcl_Gets cr} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation cr
    set l ""
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    close $f
    set l
} {hello 6 cr 0 there 12 cr 0}
test io-8.8 {Tcl_Write cr, Tcl_Gets lf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation lf
    set l ""
    lappend l [string length [gets $f]]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    close $f
    set l
} {21 21 lf 1 {} 21 lf 1}
test io-8.9 {Tcl_Write cr, Tcl_Gets crlf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation crlf
    set l ""
    lappend l [string length [gets $f]]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    close $f
    set l
} {21 21 crlf 1 {} 21 crlf 1}
test io-8.10 {Tcl_Write crlf, Tcl_Gets crlf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation crlf
    set l ""
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    close $f
    set l
} {hello 7 crlf 0 there 14 crlf 0}
test io-8.11 {Tcl_Write crlf, Tcl_Gets cr} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation cr
    set l ""
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    lappend l [string length [gets $f]]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    close $f
    set l
} {hello 6 cr 0 6 13 cr 0}
test io-8.12 {Tcl_Write crlf, Tcl_Gets lf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    puts $f hello\nthere\nand\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation lf
    set l ""
    lappend l [string length [gets $f]]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    lappend l [string length [gets $f]]
    lappend l [tell $f]
    lappend l [fconfigure $f -translation]
    lappend l [eof $f]
    close $f
    set l
} {6 7 lf 0 6 14 lf 0}
test io-8.13 {binary mode is synonym of lf mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation binary
    set x [fconfigure $f -translation]
    close $f
    set x
} lf
#
# Test io-9.14 has been removed because "auto" output translation mode is
# not supoprted.
#
test io-8.14 {Tcl_Write mixed, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts $f hello\nthere\rand\r\nhere
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {hello there and here 0 {} 1}
test io-8.15 {Tcl_Write mixed, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts -nonewline $f hello\nthere\rand\r\nhere\r
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {hello there and here 0 {} 1}
test io-8.16 {Tcl_Write mixed, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts -nonewline $f hello\nthere\rand\r\nhere\n
    close $f
    set f [open test1 r]
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {hello there and here 0 {} 1}
test io-8.17 {Tcl_Write mixed, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts -nonewline $f hello\nthere\rand\r\nhere\r\n
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {hello there and here 0 {} 1}
test io-8.18 {Tcl_Write ^Z at end, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set s [format "hello\nthere\nand\rhere\n\%c" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation auto
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {hello there and here 0 {} 1}
test io-8.19 {Tcl_Write, implicit ^Z at end, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -eofchar \x1a -translation lf
    puts $f hello\nthere\nand\rhere
    close $f
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation auto
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {hello there and here 0 {} 1}
test io-8.20 {Tcl_Write, ^Z in middle, Tcl_Gets auto, eofChar} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set s [format "abc\ndef\n%cqrs\ntuv" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -eofchar \x1a
    fconfigure $f -translation auto
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {abc def 0 {} 1}
test io-8.21 {Tcl_Write, no newline ^Z in middle, Tcl_Gets auto, eofChar} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set s [format "abc\ndef\n%cqrs\ntuv" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation auto
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {abc def 0 {} 1}
test io-8.22 {Tcl_Write, ^Z in middle ignored, Tcl_Gets lf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar {}
    set s [format "abc\ndef\n%cqrs\ntuv" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -translation lf -eofchar {}
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} "abc def 0 \x1aqrs 0 tuv 0 {} 1"
test io-8.23 {Tcl_Write, ^Z in middle ignored, Tcl_Gets cr} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr -eofchar {}
    set s [format "abc\ndef\n%cqrs\ntuv" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -translation cr -eofchar {}
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} "abc def 0 \x1aqrs 0 tuv 0 {} 1"
test io-8.24 {Tcl_Write, ^Z in middle ignored, Tcl_Gets crlf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf -eofchar {}
    set s [format "abc\ndef\n%cqrs\ntuv" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -translation crlf -eofchar {}
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} "abc def 0 \x1aqrs 0 tuv 0 {} 1"
test io-8.25 {Tcl_Write lf, ^Z in middle, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set s [format "abc\ndef\n%cqrs\ntuv" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {abc def 0 {} 1}
test io-8.26 {Tcl_Write lf, ^Z in middle, Tcl_Gets lf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set s [format "abc\ndef\n%cqrs\ntuv" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -translation lf -eofchar \x1a
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {abc def 0 {} 1}
test io-8.27 {Tcl_Write cr, ^Z in middle, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr -eofchar {}
    set s [format "abc\ndef\n%cqrs\ntuv" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {abc def 0 {} 1}
test io-8.28 {Tcl_Write cr, ^Z in middle, Tcl_Gets cr} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr -eofchar {}
    set s [format "abc\ndef\n%cqrs\ntuv" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -translation cr -eofchar \x1a
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {abc def 0 {} 1}
test io-8.29 {Tcl_Write crlf, ^Z in middle, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf -eofchar {}
    set s [format "abc\ndef\n%cqrs\ntuv" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {abc def 0 {} 1}
test io-8.30 {Tcl_Write crlf, ^Z in middle, Tcl_Gets crlf} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf -eofchar {}
    set s [format "abc\ndef\n%cqrs\ntuv" 26]
    puts $f $s
    close $f
    set f [open test1 r]
    fconfigure $f -translation crlf -eofchar \x1a
    set l ""
    lappend l [gets $f]
    lappend l [gets $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {abc def 0 {} 1}
test io-8.31 {Tcl_Write crlf on block boundary, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    set line "123456789ABCDE"   ;# 14 char plus crlf
    puts -nonewline $f x        ;# shift crlf across block boundary
    for {set i 0} {$i < 700} {incr i} {
        puts $f $line
    }
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto
    set c ""
    while {[gets $f line] >= 0} {
        append c $line\n
    }
    close $f
    string length $c
} [expr 700*15+1]
test io-8.32 {Tcl_Write crlf on block boundary, Tcl_Gets auto} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    set line "123456789ABCDE"   ;# 14 char plus crlf
    puts -nonewline $f x        ;# shift crlf across block boundary
    for {set i 0} {$i < 256} {incr i} {
        puts $f $line
    }
    close $f
    set f [open test1 r]
    fconfigure $f -translation auto
    set c ""
    while {[gets $f line] >= 0} {
        append c $line\n
    }
    close $f
    string length $c
} [expr 256*15+1]
 
 
# Test Tcl_Read and buffering.
 
test io-9.1 {Tcl_Read, channel not readable} {
    list [catch {read stdout} msg] $msg
} {1 {channel "stdout" wasn't opened for reading}}
test io-9.2 {Tcl_Read, zero byte count} {
    read stdin 0
} ""
test io-9.3 {Tcl_Read, negative byte count} {
    set f [open longfile r]
    set l [list [catch {read $f -1} msg] $msg]
    close $f
    set l
} {1 {bad argument "-1": should be "nonewline"}}
test io-9.4 {Tcl_Read, positive byte count} {
    set f [open longfile r]
    set x [read $f 1024]
    set s [string length $x]
    unset x
    close $f
    set s
} 1024
test io-9.5 {Tcl_Read, multiple buffers} {
    set f [open longfile r]
    fconfigure $f -buffersize 100
    set x [read $f 1024]
    set s [string length $x]
    unset x
    close $f
    set s
} 1024
test io-9.6 {Tcl_Read, very large read} {
    set f1 [open longfile r]
    set z [read $f1 1000000]
    close $f1
    set l [string length $z]
    set x ok
    set z [file size longfile]
    if {$z != $l} {
        set x broken
    }
    set x
} ok
test io-9.7 {Tcl_Read, nonblocking, file} {nonBlockFiles} {
    set f1 [open longfile r]
    fconfigure $f1 -blocking off
    set z [read $f1 20]
    close $f1
    set l [string length $z]
    set x ok
    if {$l != 20} {
        set x broken
    }
    set x
} ok
test io-9.8 {Tcl_Read, nonblocking, file} {nonBlockFiles} {
    set f1 [open longfile r]
    fconfigure $f1 -blocking off
    set z [read $f1 1000000]
    close $f1
    set x ok
    set l [string length $z]]
    set z [file size longfile]]
    if {$z != $l} {
        set x broken
    }
  set x
} ok
test io-9.9 {Tcl_Read, read to end of file} {
    set f1 [open longfile r]
    set z [read $f1]
    close $f1
    set l [string length $z]
    set x ok
    set z [file size longfile]
    if {$z != $l} {
        set x broken
    }
    set x
} ok
test io-9.10 {Tcl_Read from a pipe} {stdio} {
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {puts [gets stdin]}
    close $f1
    set f1 [open "|[list $tcltest pipe]" r+]
    puts $f1 hello
    flush $f1
    set x [read $f1]
    close $f1
    set x
} "hello\n"
test io-9.11 {Tcl_Read from a pipe} {stdio} {
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {puts [gets stdin]}
    puts $f1 {puts [gets stdin]}
    close $f1
    set f1 [open "|[list $tcltest pipe]" r+]
    puts $f1 hello
    flush $f1
    set x ""
    lappend x [read $f1 6]
    puts $f1 hello
    flush $f1
    lappend x [read $f1]
    close $f1
    set x
} {{hello
} {hello
}}
test io-9.12 {Tcl_Read, -nonewline} {
    removeFile test1
    set f1 [open test1 w]
    puts $f1 hello
    puts $f1 bye
    close $f1
    set f1 [open test1 r]
    set c [read -nonewline $f1]
    close $f1
    set c
} {hello
bye}
test io-9.13 {Tcl_Read, -nonewline} {
    removeFile test1
    set f1 [open test1 w]
    puts $f1 hello
    puts $f1 bye
    close $f1
    set f1 [open test1 r]
    set c [read -nonewline $f1]
    close $f1
    list [string length $c] $c
} {9 {hello
bye}}
test io-9.14 {Tcl_Read, reading in small chunks} {
    removeFile test1
    set f [open test1 w]
    puts $f "Two lines: this one"
    puts $f "and this one"
    close $f
    set f [open test1]
    set x [list [read $f 1] [read $f 2] [read $f]]
    close $f
    set x
} {T wo { lines: this one
and this one
}}
test io-9.15 {Tcl_Read, asking for more input than available} {
    removeFile test1
    set f [open test1 w]
    puts $f "Two lines: this one"
    puts $f "and this one"
    close $f
    set f [open test1]
    set x [read $f 100]
    close $f
    set x
} {Two lines: this one
and this one
}
test io-9.16 {Tcl_Read, read to end of file with -nonewline} {
    removeFile test1
    set f [open test1 w]
    puts $f "Two lines: this one"
    puts $f "and this one"
    close $f
    set f [open test1]
    set x [read -nonewline $f]
    close $f
    set x
} {Two lines: this one
and this one}
 
# Test Tcl_Gets.
 
test io-10.1 {Tcl_Gets, reading what was written} {
    removeFile test1
    set f1 [open test1 w]
    set y "first line"
    puts $f1 $y
    close $f1
    set f1 [open test1 r]
    set x [gets $f1]
    set z ok
    if {"$x" != "$y"} {
        set z broken
    }
    close $f1
    set z
} ok
test io-10.2 {Tcl_Gets into variable} {
    set f1 [open longfile r]
    set c [gets $f1 x]
    set l [string length x]
    set z ok
    if {$l != $l} {
        set z broken
    }
    close $f1
    set z
} ok
test io-10.3 {Tcl_Gets from pipe} {stdio} {
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {puts [gets stdin]}
    close $f1
    set f1 [open "|[list $tcltest pipe]" r+]
    puts $f1 hello
    flush $f1
    set x [gets $f1]
    close $f1
    set z ok
    if {"$x" != "hello"} {
        set z broken
    }
    set z
} ok
test io-10.4 {Tcl_Gets with long line} {
    removeFile test3
    set f [open test3 w]
    puts -nonewline $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ"
    puts -nonewline $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ"
    puts -nonewline $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ"
    puts -nonewline $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ"
    puts $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ"
    close $f
    set f [open test3]
    set x [gets $f]
    close $f
    set x
} {abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ}
test io-10.5 {Tcl_Gets with long line} {
    set f [open test3]
    set x [gets $f y]
    close $f
    list $x $y
} {260 abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ}
test io-10.6 {Tcl_Gets and end of file} {
    removeFile test3
    set f [open test3 w]
    puts -nonewline $f "Test1\nTest2"
    close $f
    set f [open test3]
    set x {}
    set y {}
    lappend x [gets $f y] $y
    set y {}
    lappend x [gets $f y] $y
    set y {}
    lappend x [gets $f y] $y
    close $f
    set x
} {5 Test1 5 Test2 -1 {}}
test io-10.7 {Tcl_Gets and bad variable} {
    set f [open test3 w]
    puts $f "Line 1"
    puts $f "Line 2"
    close $f
    catch {unset x}
    set x 24
    set f [open test3 r]
    set result [list [catch {gets $f x(0)} msg] $msg]
    close $f
    set result
} {1 {can't set "x(0)": variable isn't array}}
test io-10.8 {Tcl_Gets, exercising double buffering} {
    set f [open test3 w]
    fconfigure $f -translation lf -eofchar {}
    set x ""
    for {set y 0} {$y < 99} {incr y} {set x "a$x"}
    for {set y 0} {$y < 100} {incr y} {puts $f $x}
    close $f
    set f [open test3 r]
    fconfigure $f -translation lf
    for {set y 0} {$y < 100} {incr y} {gets $f}
    close $f
    set y
} 100
test io-10.9 {Tcl_Gets, exercising double buffering} {
    set f [open test3 w]
    fconfigure $f -translation lf -eofchar {}
    set x ""
    for {set y 0} {$y < 99} {incr y} {set x "a$x"}
    for {set y 0} {$y < 200} {incr y} {puts $f $x}
    close $f
    set f [open test3 r]
    fconfigure $f -translation lf
    for {set y 0} {$y < 200} {incr y} {gets $f}
    close $f
    set y
} 200
test io-10.10 {Tcl_Gets, exercising double buffering} {
    set f [open test3 w]
    fconfigure $f -translation lf -eofchar {}
    set x ""
    for {set y 0} {$y < 99} {incr y} {set x "a$x"}
    for {set y 0} {$y < 300} {incr y} {puts $f $x}
    close $f
    set f [open test3 r]
    fconfigure $f -translation lf
    for {set y 0} {$y < 300} {incr y} {gets $f}
    close $f
    set y
} 300
 
# Test Tcl_Seek and Tcl_Tell.
 
test io-11.1 {Tcl_Seek to current position at start of file} {
    set f1 [open longfile r]
    seek $f1 0 current
    set c [tell $f1]
    close $f1
    set c
} 0
test io-11.2 {Tcl_Seek to offset from start} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf -eofchar {}
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    close $f1
    set f1 [open test1 r]
    seek $f1 10 start
    set c [tell $f1]
    close $f1
    set c
} 10
test io-11.3 {Tcl_Seek to end of file} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf -eofchar {}
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    close $f1
    set f1 [open test1 r]
    seek $f1 0 end
    set c [tell $f1]
    close $f1
    set c
} 54
test io-11.4 {Tcl_Seek to offset from end of file} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf -eofchar {}
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    close $f1
    set f1 [open test1 r]
    seek $f1 -10 end
    set c [tell $f1]
    close $f1
    set c
} 44
test io-11.5 {Tcl_Seek to offset from current position} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf -eofchar {}
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    close $f1
    set f1 [open test1 r]
    seek $f1 10 current
    seek $f1 10 current
    set c [tell $f1]
    close $f1
    set c
} 20
test io-11.6 {Tcl_Seek to offset from end of file} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf -eofchar {}
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    close $f1
    set f1 [open test1 r]
    seek $f1 -10 end
    set c [tell $f1]
    set r [read $f1]
    close $f1
    list $c $r
} {44 {rstuvwxyz
}}
test io-11.7 {Tcl_Seek to offset from end of file, then to current position} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf -eofchar {}
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    close $f1
    set f1 [open test1 r]
    seek $f1 -10 end
    set c1 [tell $f1]
    set r1 [read $f1 5]
    seek $f1 0 current
    set c2 [tell $f1]
    close $f1
    list $c1 $r1 $c2
} {44 rstuv 49}
test io-11.8 {Tcl_Seek on pipes: not supported} {stdio} {
    set f1 [open "|[list $tcltest]" r+]
    set x [list [catch {seek $f1 0 current} msg] $msg]
    close $f1
    regsub {".*":} $x {"":} x
    string tolower $x
} {1 {error during seek on "": invalid argument}}
test io-11.9 {Tcl_Seek, testing buffered input flushing} {
    removeFile test3
    set f [open test3 w]
    fconfigure $f -eofchar {}
    puts -nonewline $f "abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ"
    close $f
    set f [open test3 RDWR]
    set x [read $f 1]
    seek $f 3
    lappend x [read $f 1]
    seek $f 0 start
    lappend x [read $f 1]
    seek $f 10 current
    lappend x [read $f 1]
    seek $f -2 end
    lappend x [read $f 1]
    seek $f 50 end
    lappend x [read $f 1]
    seek $f 1
    lappend x [read $f 1]
    close $f
    set x
} {a d a l Y {} b}
test io-11.10 {Tcl_Seek testing flushing of buffered input} {
    set f [open test3 w]
    fconfigure $f -translation lf
    puts $f xyz\n123
    close $f
    set f [open test3 r+]
    fconfigure $f -translation lf
    set x [gets $f]
    seek $f 0 current
    puts $f 456
    close $f
    list $x [viewFile test3]
} "xyz {xyz
456}"
test io-11.11 {Tcl_Seek testing flushing of buffered output} {
    set f [open test3 w]
    puts $f xyz\n123
    close $f
    set f [open test3 w+]
    puts $f xyzzy
    seek $f 2
    set x [gets $f]
    close $f
    list $x [viewFile test3]
} "zzy xyzzy"
test io-11.12 {Tcl_Seek testing combination of write, seek back and read} {
    set f [open test3 w]
    fconfigure $f -translation lf -eofchar {}
    puts $f xyz\n123
    close $f
    set f [open test3 a+]
    fconfigure $f -translation lf -eofchar {}
    puts $f xyzzy
    flush $f
    set x [tell $f]
    seek $f -4 cur
    set y [gets $f]
    close $f
    list $x [viewFile test3] $y
} {14 {xyz
123
xyzzy} zzy}
test io-11.13 {Tcl_Tell at start of file} {
    removeFile test1
    set f1 [open test1 w]
    set p [tell $f1]
    close $f1
    set p
} 0
test io-11.14 {Tcl_Tell after seek to end of file} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf -eofchar {}
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    close $f1
    set f1 [open test1 r]
    seek $f1 0 end
    set c1 [tell $f1]
    close $f1
    set c1
} 54
test io-11.15 {Tcl_Tell combined with seeking} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf -eofchar {}
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    puts $f1 "abcdefghijklmnopqrstuvwxyz"
    close $f1
    set f1 [open test1 r]
    seek $f1 10 start
    set c1 [tell $f1]
    seek $f1 10 current
    set c2 [tell $f1]
    close $f1
    list $c1 $c2
} {10 20}
test io-11.16 {Tcl_tell on pipe: always -1} {stdio} {
    set f1 [open "|[list $tcltest]" r+]
    set c [tell $f1]
    close $f1
    set c
} -1
test io-11.17 {Tcl_Tell on pipe: always -1} {stdio} {
    set f1 [open "|[list $tcltest]" r+]
    puts $f1 {puts hello}
    flush $f1
    set c [tell $f1]
    gets $f1
    close $f1
    set c
} -1
test io-11.18 {Tcl_Tell combined with seeking and reading} {
    removeFile test2
    set f [open test2 w]
    fconfigure $f -translation lf -eofchar {}
    puts -nonewline $f "line1\nline2\nline3\nline4\nline5\n"
    close $f
    set f [open test2]
    fconfigure $f -translation lf
    set x [tell $f]
    read $f 3
    lappend x [tell $f]
    seek $f 2
    lappend x [tell $f]
    seek $f 10 current
    lappend x [tell $f]
    seek $f 0 end
    lappend x [tell $f]
    close $f
    set x
} {0 3 2 12 30}
test io-11.19 {Tcl_Tell combined with opening in append mode} {
    set f [open test3 w]
    fconfigure $f -translation lf -eofchar {}
    puts $f "abcdefghijklmnopqrstuvwxyz"
    puts $f "abcdefghijklmnopqrstuvwxyz"
    close $f
    set f [open test3 a]
    set c [tell $f]
    close $f
    set c
} 54
test io-11.20 {Tcl_Tell combined with writing} {
    set f [open test3 w]
    set l ""
    seek $f 29 start
    lappend l [tell $f]
    puts -nonewline $f a
    seek $f 39 start
    lappend l [tell $f]
    puts -nonewline $f a
    lappend l [tell $f]
    seek $f 407 end
    lappend l [tell $f]
    close $f
    set l
} {29 39 40 447}
 
# Test Tcl_Eof
 
test io-12.1 {Tcl_Eof} {
    removeFile test1
    set f [open test1 w]
    puts $f hello
    puts $f hello
    close $f
    set f [open test1]
    set x [eof $f]
    lappend x [eof $f]
    gets $f
    lappend x [eof $f]
    gets $f
    lappend x [eof $f]
    gets $f
    lappend x [eof $f]
    lappend x [eof $f]
    close $f
    set x
} {0 0 0 0 1 1}
test io-12.2 {Tcl_Eof with pipe} {stdio} {
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {gets stdin}
    puts $f1 {puts hello}
    close $f1
    set f1 [open "|[list $tcltest pipe]" r+]
    puts $f1 hello
    set x [eof $f1]
    flush $f1
    lappend x [eof $f1]
    gets $f1
    lappend x [eof $f1]
    gets $f1
    lappend x [eof $f1]
    close $f1
    set x
} {0 0 0 1}
test io-12.3 {Tcl_Eof with pipe} {stdio} {
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {gets stdin}
    puts $f1 {puts hello}
    close $f1
    set f1 [open "|[list $tcltest pipe]" r+]
    puts $f1 hello
    set x [eof $f1]
    flush $f1
    lappend x [eof $f1]
    gets $f1
    lappend x [eof $f1]
    gets $f1
    lappend x [eof $f1]
    gets $f1
    lappend x [eof $f1]
    gets $f1
    lappend x [eof $f1]
    close $f1
    set x
} {0 0 0 1 1 1}
test io-12.4 {Tcl_Eof, eof detection on nonblocking file} {nonBlockFiles} {
    removeFile test1
    set f [open test1 w]
    close $f
    set f [open test1 r]
    fconfigure $f -blocking off
    set l ""
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {{} 1}
test io-12.5 {Tcl_Eof, eof detection on nonblocking pipe} {stdio} {
    removeFile pipe
    set f [open pipe w]
    puts $f {
        exit
    }
    close $f
    set f [open "|[list $tcltest pipe]" r]
    set l ""
    lappend l [gets $f]
    lappend l [eof $f]
    close $f
    set l
} {{} 1}
test io-12.6 {Tcl_Eof, eof char, lf write, auto read} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar \x1a
    puts $f abc\ndef
    close $f
    set s [file size test1]
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    set l [string length [read $f]]
    set e [eof $f]
    close $f
    list $s $l $e
} {9 8 1}
test io-12.7 {Tcl_Eof, eof char, lf write, lf read} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar \x1a
    puts $f abc\ndef
    close $f
    set s [file size test1]
    set f [open test1 r]
    fconfigure $f -translation lf -eofchar \x1a
    set l [string length [read $f]]
    set e [eof $f]
    close $f
    list $s $l $e
} {9 8 1}
test io-12.8 {Tcl_Eof, eof char, cr write, auto read} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr -eofchar \x1a
    puts $f abc\ndef
    close $f
    set s [file size test1]
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    set l [string length [read $f]]
    set e [eof $f]
    close $f
    list $s $l $e
} {9 8 1}
test io-12.9 {Tcl_Eof, eof char, cr write, cr read} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr -eofchar \x1a
    puts $f abc\ndef
    close $f
    set s [file size test1]
    set f [open test1 r]
    fconfigure $f -translation cr -eofchar \x1a
    set l [string length [read $f]]
    set e [eof $f]
    close $f
    list $s $l $e
} {9 8 1}
test io-12.10 {Tcl_Eof, eof char, crlf write, auto read} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf -eofchar \x1a
    puts $f abc\ndef
    close $f
    set s [file size test1]
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    set l [string length [read $f]]
    set e [eof $f]
    close $f
    list $s $l $e
} {11 8 1}
test io-12.11 {Tcl_Eof, eof char, crlf write, crlf read} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf -eofchar \x1a
    puts $f abc\ndef
    close $f
    set s [file size test1]
    set f [open test1 r]
    fconfigure $f -translation crlf -eofchar \x1a
    set l [string length [read $f]]
    set e [eof $f]
    close $f
    list $s $l $e
} {11 8 1}
test io-12.12 {Tcl_Eof, eof char in middle, lf write, auto read} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar {}
    set i [format abc\ndef\n%cqrs\nuvw 26]
    puts $f $i
    close $f
    set c [file size test1]
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    set l [string length [read $f]]
    set e [eof $f]
    close $f
    list $c $l $e
} {17 8 1}
test io-12.13 {Tcl_Eof, eof char in middle, lf write, lf read} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf -eofchar {}
    set i [format abc\ndef\n%cqrs\nuvw 26]
    puts $f $i
    close $f
    set c [file size test1]
    set f [open test1 r]
    fconfigure $f -translation lf -eofchar \x1a
    set l [string length [read $f]]
    set e [eof $f]
    close $f
    list $c $l $e
} {17 8 1}
test io-12.14 {Tcl_Eof, eof char in middle, cr write, auto read} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr -eofchar {}
    set i [format abc\ndef\n%cqrs\nuvw 26]
    puts $f $i
    close $f
    set c [file size test1]
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    set l [string length [read $f]]
    set e [eof $f]
    close $f
    list $c $l $e
} {17 8 1}
test io-12.15 {Tcl_Eof, eof char in middle, cr write, cr read} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr -eofchar {}
    set i [format abc\ndef\n%cqrs\nuvw 26]
    puts $f $i
    close $f
    set c [file size test1]
    set f [open test1 r]
    fconfigure $f -translation cr -eofchar \x1a
    set l [string length [read $f]]
    set e [eof $f]
    close $f
    list $c $l $e
} {17 8 1}
test io-12.16 {Tcl_Eof, eof char in middle, crlf write, auto read} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf -eofchar {}
    set i [format abc\ndef\n%cqrs\nuvw 26]
    puts $f $i
    close $f
    set c [file size test1]
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    set l [string length [read $f]]
    set e [eof $f]
    close $f
    list $c $l $e
} {21 8 1}
test io-12.17 {Tcl_Eof, eof char in middle, crlf write, crlf read} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf -eofchar {}
    set i [format abc\ndef\n%cqrs\nuvw 26]
    puts $f $i
    close $f
    set c [file size test1]
    set f [open test1 r]
    fconfigure $f -translation crlf -eofchar \x1a
    set l [string length [read $f]]
    set e [eof $f]
    close $f
    list $c $l $e
} {21 8 1}
 
# Test Tcl_InputBlocked
 
test io-13.1 {Tcl_InputBlocked on nonblocking pipe} {unixOrPc tempNotPc} {
    set f1 [open "|[list $tcltest]" r+]
    puts $f1 {puts hello_from_pipe}
    flush $f1
    gets $f1
    fconfigure $f1 -blocking off -buffering full
    puts $f1 {puts hello}
    set x ""
    lappend x [gets $f1]
    lappend x [fblocked $f1]
    flush $f1
    after 200
    lappend x [gets $f1]
    lappend x [fblocked $f1]
    lappend x [gets $f1]
    lappend x [fblocked $f1]
    close $f1
    set x
} {{} 1 hello 0 {} 1}
test io-13.2 {Tcl_InputBlocked on blocking pipe} {unixOrPc tempNotPc} {
    set f1 [open "|[list $tcltest]" r+]
    fconfigure $f1 -buffering line
    puts $f1 {puts hello_from_pipe}
    set x ""
    lappend x [gets $f1]
    lappend x [fblocked $f1]
    puts $f1 {exit}
    lappend x [gets $f1]
    lappend x [fblocked $f1]
    lappend x [eof $f1]
    close $f1
    set x
} {hello_from_pipe 0 {} 0 1}
test io-13.3 {Tcl_InputBlocked vs files, short read} {
    removeFile test1
    set f [open test1 w]
    puts $f abcdefghijklmnop
    close $f
    set f [open test1 r]
    set l ""
    lappend l [fblocked $f]
    lappend l [read $f 3]
    lappend l [fblocked $f]
    lappend l [read -nonewline $f]
    lappend l [fblocked $f]
    lappend l [eof $f]
    close $f
    set l
} {0 abc 0 defghijklmnop 0 1}
test io-13.4 {Tcl_InputBlocked vs files, event driven read} {
    proc in {f} {
        global l x
        lappend l [read $f 3]
        if {[eof $f]} {lappend l eof; close $f; set x done}
    }
    removeFile test1
    set f [open test1 w]
    puts $f abcdefghijklmnop
    close $f
    set f [open test1 r]
    set l ""
    fileevent $f readable [list in $f]
    vwait x
    set l
} {abc def ghi jkl mno {p
} eof}
test io-13.5 {Tcl_InputBlocked vs files, short read, nonblocking} {nonBlockFiles} {
    removeFile test1
    set f [open test1 w]
    puts $f abcdefghijklmnop
    close $f
    set f [open test1 r]
    fconfigure $f -blocking off
    set l ""
    lappend l [fblocked $f]
    lappend l [read $f 3]
    lappend l [fblocked $f]
    lappend l [read -nonewline $f]
    lappend l [fblocked $f]
    lappend l [eof $f]
    close $f
    set l
} {0 abc 0 defghijklmnop 0 1}
test io-13.6 {Tcl_InputBlocked vs files, event driven read} {nonBlockFiles} {
    proc in {f} {
        global l x
        lappend l [read $f 3]
        if {[eof $f]} {lappend l eof; close $f; set x done}
    }
    removeFile test1
    set f [open test1 w]
    puts $f abcdefghijklmnop
    close $f
    set f [open test1 r]
    fconfigure $f -blocking off
    set l ""
    fileevent $f readable [list in $f]
    vwait x
    set l
} {abc def ghi jkl mno {p
} eof}
 
# Test Tcl_InputBuffered
 
test io-14.1 {Tcl_InputBuffered} {
    set f [open longfile r]
    fconfigure $f -buffersize 4096
    read $f 3
    set l ""
    lappend l [testchannel inputbuffered $f]
    lappend l [tell $f]
    close $f
    set l
} {4093 3}
test io-14.2 {Tcl_InputBuffered, test input flushing on seek} {
    set f [open longfile r]
    fconfigure $f -buffersize 4096
    read $f 3
    set l ""
    lappend l [testchannel inputbuffered $f]
    lappend l [tell $f]
    seek $f 0 current
    lappend l [testchannel inputbuffered $f]
    lappend l [tell $f]
    close $f
    set l
} {4093 3 0 3}
 
# Test Tcl_SetChannelBufferSize, Tcl_GetChannelBufferSize
 
test io-15.1 {Tcl_GetChannelBufferSize, default buffer size} {
    set f [open longfile r]
    set s [fconfigure $f -buffersize]
    close $f
    set s
} 4096
test io-15.2 {Tcl_SetChannelBufferSize, Tcl_GetChannelBufferSize} {
    set f [open longfile r]
    set l ""
    lappend l [fconfigure $f -buffersize]
    fconfigure $f -buffersize 10000
    lappend l [fconfigure $f -buffersize]
    fconfigure $f -buffersize 1
    lappend l [fconfigure $f -buffersize]
    fconfigure $f -buffersize -1
    lappend l [fconfigure $f -buffersize]
    fconfigure $f -buffersize 0
    lappend l [fconfigure $f -buffersize]
    fconfigure $f -buffersize 100000
    lappend l [fconfigure $f -buffersize]
    fconfigure $f -buffersize 10000000
    lappend l [fconfigure $f -buffersize]
    close $f
    set l
} {4096 10000 4096 4096 4096 100000 4096}
 
# Test Tcl_SetChannelOption, Tcl_GetChannelOption
 
test io-16.1 {Tcl_GetChannelOption} {
    removeFile test1
    set f1 [open test1 w]
    set x [fconfigure $f1 -blocking]
    close $f1
    set x
} 1
#
# Test 17.2 was removed.
#
test io-16.2 {Tcl_GetChannelOption} {
    removeFile test1
    set f1 [open test1 w]
    set x [fconfigure $f1 -buffering]
    close $f1
    set x
} full
test io-16.3 {Tcl_GetChannelOption} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -buffering line
    set x [fconfigure $f1 -buffering]
    close $f1
    set x
} line
test io-16.4 {Tcl_GetChannelOption, Tcl_SetChannelOption} {
    removeFile test1
    set f1 [open test1 w]
    set l ""
    lappend l [fconfigure $f1 -buffering]
    fconfigure $f1 -buffering line
    lappend l [fconfigure $f1 -buffering]
    fconfigure $f1 -buffering none
    lappend l [fconfigure $f1 -buffering]
    fconfigure $f1 -buffering line
    lappend l [fconfigure $f1 -buffering]
    fconfigure $f1 -buffering full
    lappend l [fconfigure $f1 -buffering]
    close $f1
    set l
} {full line none line full}
test io-16.5 {Tcl_GetChannelOption, invariance} {
    removeFile test1
    set f1 [open test1 w]
    set l ""
    lappend l [fconfigure $f1 -buffering]
    lappend l [list [catch {fconfigure $f1 -buffering green} msg] $msg]
    lappend l [fconfigure $f1 -buffering]
    close $f1
    set l
} {full {1 {bad value for -buffering: must be one of full, line, or none}} full}
test io-16.6 {Tcl_SetChannelOption, multiple options} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf -buffering line
    puts $f1 hello
    puts $f1 bye
    set x [file size test1]
    close $f1
    set x
} 10
test io-16.7 {Tcl_SetChannelOption, buffering, translation} {
    removeFile test1
    set f1 [open test1 w]
    fconfigure $f1 -translation lf
    puts $f1 hello
    puts $f1 bye
    set x ""
    fconfigure $f1 -buffering line
    lappend x [file size test1]
    puts $f1 really_bye
    lappend x [file size test1]
    close $f1
    set x
} {0 21}
test io-16.8 {Tcl_SetChannelOption, different buffering options} {
    removeFile test1
    set f1 [open test1 w]
    set l ""
    fconfigure $f1 -translation lf -buffering none -eofchar {}
    puts -nonewline $f1 hello
    lappend l [file size test1]
    puts -nonewline $f1 hello
    lappend l [file size test1]
    fconfigure $f1 -buffering full
    puts -nonewline $f1 hello
    lappend l [file size test1]
    fconfigure $f1 -buffering none
    lappend l [file size test1]
    puts -nonewline $f1 hello
    lappend l [file size test1]
    close $f1
    lappend l [file size test1]
    set l
} {5 10 10 10 20 20}
test io-16.9 {Tcl_SetChannelOption, blocking mode} {nonBlockFiles} {
    removeFile test1
    set f1 [open test1 w]
    close $f1
    set f1 [open test1 r]
    set x ""
    lappend x [fconfigure $f1 -blocking]
    fconfigure $f1 -blocking off
    lappend x [fconfigure $f1 -blocking]
    lappend x [gets $f1]
    lappend x [read $f1 1000]
    lappend x [fblocked $f1]
    lappend x [eof $f1]
    close $f1
    set x
} {1 0 {} {} 0 1}
test io-16.10 {Tcl_SetChannelOption, blocking mode} {unixOrPc tempNotPc} {
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {gets stdin}
    puts $f1 {after 100}
    puts $f1 {puts hi}
    puts $f1 {gets stdin}
    close $f1
    set x ""
    set f1 [open "|[list $tcltest pipe]" r+]
    fconfigure $f1 -blocking off -buffering line
    lappend x [fconfigure $f1 -blocking]
    lappend x [gets $f1]
    lappend x [fblocked $f1]
    puts $f1 hello
    lappend x [gets $f1]
    lappend x [fblocked $f1]
    puts $f1 bye
    lappend x [gets $f1]
    lappend x [fblocked $f1]
    fconfigure $f1 -blocking on
    lappend x [fconfigure $f1 -blocking]
    lappend x [gets $f1]
    lappend x [fblocked $f1]
    lappend x [eof $f1]
    lappend x [gets $f1]
    lappend x [eof $f1]
    close $f1
    set x
} {0 {} 1 {} 1 {} 1 1 hi 0 0 {} 1}
test io-16.11 {Tcl_SetChannelOption, Tcl_GetChannelOption, buffer size} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -buffersize -10
    set x [fconfigure $f -buffersize]
    close $f
    set x
} 4096
test io-16.12 {Tcl_SetChannelOption, Tcl_GetChannelOption buffer size} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -buffersize 10000000
    set x [fconfigure $f -buffersize]
    close $f
    set x
} 4096
test io-16.13 {Tcl_SetChannelOption, Tcl_GetChannelOption, buffer size} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -buffersize 40000
    set x [fconfigure $f -buffersize]
    close $f
    set x
} 40000
test io-16.14 {Tcl_SetChannelOption, setting read mode independently} \
        {socket} {
    proc accept {s a p} {close $s}
    set s1 [socket -server accept 0]
    set port [lindex [fconfigure $s1 -sockname] 2]
    set s2 [socket localhost $port]
    update
    fconfigure $s2 -translation {auto lf}
    set modes [fconfigure $s2 -translation]
    close $s1
    close $s2
    set modes
} {auto lf}
test io-16.15 {Tcl_SetChannelOption, setting read mode independently} \
        {socket} {
    proc accept {s a p} {close $s}
    set s1 [socket -server accept 0]
    set port [lindex [fconfigure $s1 -sockname] 2]
    set s2 [socket localhost $port]
    update
    fconfigure $s2 -translation {auto crlf}
    set modes [fconfigure $s2 -translation]
    close $s1
    close $s2
    set modes
} {auto crlf}
test io-16.16 {Tcl_SetChannelOption, setting read mode independently} \
        {socket} {
    proc accept {s a p} {close $s}
    set s1 [socket -server accept 0]
    set port [lindex [fconfigure $s1 -sockname] 2]
    set s2 [socket localhost $port]
    update
    fconfigure $s2 -translation {auto cr}
    set modes [fconfigure $s2 -translation]
    close $s1
    close $s2
    set modes
} {auto cr}
test io-16.17 {Tcl_SetChannelOption, setting read mode independently} \
        {socket} {
    proc accept {s a p} {close $s}
    set s1 [socket -server accept 0]
    set port [lindex [fconfigure $s1 -sockname] 2]
    set s2 [socket localhost $port]
    update
    fconfigure $s2 -translation {auto auto}
    set modes [fconfigure $s2 -translation]
    close $s1
    close $s2
    set modes
} {auto crlf}
 
test io-17.1 {POSIX open access modes: RDWR} {
    removeFile test3
    set f [open test3 w]
    puts $f xyzzy
    close $f
    set f [open test3 RDWR]
    puts -nonewline $f "ab"
    seek $f 0 current
    set x [gets $f]
    close $f
    set f [open test3 r]
    lappend x [gets $f]
    close $f
    set x
} {zzy abzzy}
test io-17.2 {POSIX open access modes: CREAT} {unixOnly} {
    removeFile test3
    set f [open test3 {WRONLY CREAT} 0600]
    file stat test3 stats
    set x [format "0%o" [expr $stats(mode)&0777]]
    puts $f "line 1"
    close $f
    set f [open test3 r]
    lappend x [gets $f]
    close $f
    set x
} {0600 {line 1}}
test io-17.3 {POSIX open access modes: CREAT} {$testConfig(unix) && ([exec umask] == 2)} {
    # This test only works if your umask is 2, like ouster's.
    removeFile test3
    set f [open test3 {WRONLY CREAT}]
    close $f
    file stat test3 stats
    format "0%o" [expr $stats(mode)&0777]
} 0664
test io-17.4 {POSIX open access modes: CREAT} {
    removeFile test3
    set f [open test3 w]
    fconfigure $f -eofchar {}
    puts $f xyzzy
    close $f
    set f [open test3 {WRONLY CREAT}]
    fconfigure $f -eofchar {}
    puts -nonewline $f "ab"
    close $f
    set f [open test3 r]
    set x [gets $f]
    close $f
    set x
} abzzy
test io-17.5 {POSIX open access modes: APPEND} {
    removeFile test3
    set f [open test3 w]
    fconfigure $f -translation lf -eofchar {}
    puts $f xyzzy
    close $f
    set f [open test3 {WRONLY APPEND}]
    fconfigure $f -translation lf
    puts $f "new line"
    seek $f 0
    puts $f "abc"
    close $f
    set f [open test3 r]
    fconfigure $f -translation lf
    set x ""
    seek $f 6 current
    lappend x [gets $f]
    lappend x [gets $f]
    close $f
    set x
} {{new line} abc}
test io-17.6 {POSIX open access modes: EXCL} {
    removeFile test3
    set f [open test3 w]
    puts $f xyzzy
    close $f
    set msg [list [catch {open test3 {WRONLY CREAT EXCL}} msg] $msg]
    regsub " already " $msg " " msg
    string tolower $msg
} {1 {couldn't open "test3": file exists}}
test io-17.7 {POSIX open access modes: EXCL} {
    removeFile test3
    set f [open test3 {WRONLY CREAT EXCL}]
    fconfigure $f -eofchar {}
    puts $f "A test line"
    close $f
    viewFile test3
} {A test line}
test io-17.8 {POSIX open access modes: TRUNC} {
    removeFile test3
    set f [open test3 w]
    puts $f xyzzy
    close $f
    set f [open test3 {WRONLY TRUNC}]
    puts $f abc
    close $f
    set f [open test3 r]
    set x [gets $f]
    close $f
    set x
} abc
test io-17.9 {POSIX open access modes: NONBLOCK} {nonPortable macOrUnix} {
    removeFile test3
    set f [open test3 {WRONLY NONBLOCK CREAT}]
    puts $f "NONBLOCK test"
    close $f
    set f [open test3 r]
    set x [gets $f]
    close $f
    set x
} {NONBLOCK test}
test io-17.10 {POSIX open access modes: RDONLY} {
    set f [open test1 w]
    puts $f "two lines: this one"
    puts $f "and this"
    close $f
    set f [open test1 RDONLY]
    set x [list [gets $f] [catch {puts $f Test} msg] $msg]
    close $f
    string compare [string tolower $x] \
        [list {two lines: this one} 1 \
                [format "channel \"%s\" wasn't opened for writing" $f]]
} 0
test io-17.11 {POSIX open access modes: RDONLY} {
    removeFile test3
    string tolower [list [catch {open test3 RDONLY} msg] $msg]
} {1 {couldn't open "test3": no such file or directory}}
test io-17.12 {POSIX open access modes: WRONLY} {
    removeFile test3
    string tolower [list [catch {open test3 WRONLY} msg] $msg]
} {1 {couldn't open "test3": no such file or directory}}
test io-17.13 {POSIX open access modes: WRONLY} {
    makeFile xyzzy test3
    set f [open test3 WRONLY]
    fconfigure $f -eofchar {}
    puts -nonewline $f "ab"
    seek $f 0 current
    set x [list [catch {gets $f} msg] $msg]
    close $f
    lappend x [viewFile test3]
    string compare [string tolower $x] \
        [list 1 "channel \"$f\" wasn't opened for reading" abzzy]
} 0
test io-17.14 {POSIX open access modes: RDWR} {
    removeFile test3
    string tolower [list [catch {open test3 RDWR} msg] $msg]
} {1 {couldn't open "test3": no such file or directory}}
test io-17.15 {POSIX open access modes: RDWR} {
    makeFile xyzzy test3
    set f [open test3 RDWR]
    puts -nonewline $f "ab"
    seek $f 0 current
    set x [gets $f]
    close $f
    lappend x [viewFile test3]
} {zzy abzzy}
if {![file exists ~/_test_] && [file writable ~]} {
    test io-17.16 {tilde substitution in open} {
        set f [open ~/_test_ w]
        puts $f "Some text"
        close $f
        set x [file exists [file join $env(HOME) _test_]]
        removeFile [file join $env(HOME) _test_]
        set x
    } 1
}
test io-17.17 {tilde substitution in open} {
    set home $env(HOME)
    unset env(HOME)
    set x [list [catch {open ~/foo} msg] $msg]
    set env(HOME) $home
    set x
} {1 {couldn't find HOME environment variable to expand path}}
 
test io-18.1 {Tcl_FileeventCmd: errors} {
    list [catch {fileevent foo} msg] $msg
} {1 {wrong # args: must be "fileevent channelId event ?script?}}
test io-18.2 {Tcl_FileeventCmd: errors} {
    list [catch {fileevent foo bar baz q} msg] $msg
} {1 {wrong # args: must be "fileevent channelId event ?script?}}
test io-18.3 {Tcl_FileeventCmd: errors} {
    list [catch {fileevent gorp readable} msg] $msg
} {1 {can not find channel named "gorp"}}
test io-18.4 {Tcl_FileeventCmd: errors} {
    list [catch {fileevent gorp writable} msg] $msg
} {1 {can not find channel named "gorp"}}
test io-18.5 {Tcl_FileeventCmd: errors} {
    list [catch {fileevent gorp who-knows} msg] $msg
} {1 {bad event name "who-knows": must be readable or writable}}
 
#
# Test fileevent on a file
#
 
set f [open foo w+]
 
test io-19.1 {Tcl_FileeventCmd: creating, deleting, querying} {
    list [fileevent $f readable] [fileevent $f writable]
} {{} {}}
test io-19.2 {Tcl_FileeventCmd: replacing} {
    set result {}
    fileevent $f r "first script"
    lappend result [fileevent $f readable]
    fileevent $f r "new script"
    lappend result [fileevent $f readable]
    fileevent $f r "yet another"
    lappend result [fileevent $f readable]
    fileevent $f r ""
    lappend result [fileevent $f readable]
} {{first script} {new script} {yet another} {}}
 
#
# Test fileevent on a pipe
#
 
if {($tcl_platform(platform) != "macintosh") && \
        ($testConfig(unixExecs) == 1)} {
 
catch {set f2 [open "|[list cat -u]" r+]}
catch {set f3 [open "|[list cat -u]" r+]}
 
test io-20.1 {Tcl_FileeventCmd: creating, deleting, querying} {
    set result {}
    fileevent $f readable "script 1"
    lappend result [fileevent $f readable] [fileevent $f writable]
    fileevent $f writable "write script"
    lappend result [fileevent $f readable] [fileevent $f writable]
    fileevent $f readable {}
    lappend result [fileevent $f readable] [fileevent $f writable]
    fileevent $f writable {}
    lappend result [fileevent $f readable] [fileevent $f writable]
} {{script 1} {} {script 1} {write script} {} {write script} {} {}}
test io-20.2 {Tcl_FileeventCmd: deleting when many present} {
    set result {}
    lappend result [fileevent $f r] [fileevent $f2 r] [fileevent $f3 r]
    fileevent $f r "read f"
    fileevent $f2 r "read f2"
    fileevent $f3 r "read f3"
    lappend result [fileevent $f r] [fileevent $f2 r] [fileevent $f3 r]
    fileevent $f2 r {}
    lappend result [fileevent $f r] [fileevent $f2 r] [fileevent $f3 r]
    fileevent $f3 r {}
    lappend result [fileevent $f r] [fileevent $f2 r] [fileevent $f3 r]
    fileevent $f r {}
    lappend result [fileevent $f r] [fileevent $f2 r] [fileevent $f3 r]
} {{} {} {} {read f} {read f2} {read f3} {read f} {} {read f3} {read f} {} {} {} {} {}}
 
test io-21.1 {FileEventProc procedure: normal read event} {
    fileevent $f2 readable {
        set x [gets $f2]; fileevent $f2 readable {}
    }
    puts $f2 text; flush $f2
    set x initial
    vwait x
    set x
} {text}
test io-21.2 {FileEventProc procedure: error in read event} {
    proc bgerror args {
        global x
        set x $args
    }
    fileevent $f2 readable {error bogus}
    puts $f2 text; flush $f2
    set x initial
    vwait x
    rename bgerror {}
    list $x [fileevent $f2 readable]
} {bogus {}}
test io-21.3 {FileEventProc procedure: normal write event} {
    fileevent $f2 writable {
        lappend x "triggered"
        incr count -1
        if {$count <= 0} {
            fileevent $f2 writable {}
        }
    }
    set x initial
    set count 3
    vwait x
    vwait x
    vwait x
    set x
} {initial triggered triggered triggered}
test io-21.4 {FileEventProc procedure: eror in write event} {
    proc bgerror args {
        global x
        set x $args
    }
    fileevent $f2 writable {error bad-write}
    set x initial
    vwait x
    rename bgerror {}
    list $x [fileevent $f2 writable]
} {bad-write {}}
test io-21.5 {FileEventProc procedure: end of file} {unixOrPc} {
    set f4 [open "|[list $tcltest cat << foo]" r]
    fileevent $f4 readable {
        if {[gets $f4 line] < 0} {
            lappend x eof
            fileevent $f4 readable {}
        } else {
            lappend x $line
        }
    }
    set x initial
    vwait x
    vwait x
    close $f4
    set x
} {initial foo eof}
 
catch {close $f2}
catch {close $f3}
 
}
        # Closes if {($platform(platform) != "macintosh") && \
        #               ($testConfig(unixExecs) == 1)} clause
 
close $f
makeFile "foo bar" foo
test io-22.1 {DeleteFileEvent, cleanup on close} {
    set f [open foo r]
    fileevent $f readable {
        lappend x "binding triggered: \"[gets $f]\""
        fileevent $f readable {}
    }
    close $f
    set x initial
    after 100 { set y done }
    vwait y
    set x
} {initial}
test io-22.2 {DeleteFileEvent, cleanup on close} {
    set f [open foo r]
    set f2 [open foo r]
    fileevent $f readable {
            lappend x "f triggered: \"[gets $f]\""
            fileevent $f readable {}
        }
    fileevent $f2 readable {
        lappend x "f2 triggered: \"[gets $f2]\""
        fileevent $f2 readable {}
    }
    close $f
    set x initial
    vwait x
    close $f2
    set x
} {initial {f2 triggered: "foo bar"}}
test io-22.3 {DeleteFileEvent, cleanup on close} {
    set f [open foo r]
    set f2 [open foo r]
    set f3 [open foo r]
    fileevent $f readable {f script}
    fileevent $f2 readable {f2 script}
    fileevent $f3 readable {f3 script}
    set x {}
    close $f2
    lappend x [catch {fileevent $f readable} msg] $msg \
            [catch {fileevent $f2 readable}] \
            [catch {fileevent $f3 readable} msg] $msg
    close $f3
    lappend x [catch {fileevent $f readable} msg] $msg \
            [catch {fileevent $f2 readable}] \
            [catch {fileevent $f3 readable}]
    close $f
    lappend x [catch {fileevent $f readable}] \
            [catch {fileevent $f2 readable}] \
            [catch {fileevent $f3 readable}]
} {0 {f script} 1 0 {f3 script} 0 {f script} 1 1 1 1 1}
 
# Execute these tests only if the "testfevent" command is present.
 
if {[info commands testfevent] == "testfevent"} {
 
test io-23.1 {Tcl event loop vs multiple interpreters} {
    testfevent create
    testfevent cmd {
        set f [open foo r]
        set x "no event"
        fileevent $f readable {
            set x "f triggered: [gets $f]"
            fileevent $f readable {}
        }
    }
    after 1     ;# We must delay because Windows takes a little time to notice
    update
    testfevent cmd {close $f}
    list [testfevent cmd {set x}] [testfevent cmd {info commands after}]
} {{f triggered: foo bar} after}
test io-23.2 {Tcl event loop vs multiple interpreters} {
    testfevent create
    testfevent cmd {
        set x 0
        after 100 {set x triggered}
        vwait x
        set x
    }
} {triggered}
test io-23.3 {Tcl event loop vs multiple interpreters} {
    testfevent create
    testfevent cmd {
        set x 0
        after 10 {lappend x timer}
        after 30
        set result $x
        update idletasks
        lappend result $x
        update
        lappend result $x
    }
} {0 0 {0 timer}}
 
test io-24.1 {fileevent vs multiple interpreters} {
    set f [open foo r]
    set f2 [open foo r]
    set f3 [open foo r]
    fileevent $f readable {script 1}
    testfevent create
    testfevent share $f2
    testfevent cmd "fileevent $f2 readable {script 2}"
    fileevent $f3 readable {sript 3}
    set x {}
    lappend x [fileevent $f2 readable]
    testfevent delete
    lappend x [fileevent $f readable] [fileevent $f2 readable] \
        [fileevent $f3 readable]
    close $f
    close $f2
    close $f3
    set x
} {{} {script 1} {} {sript 3}}
test io-24.2 {deleting fileevent on interpreter delete} {
    set f [open foo r]
    set f2 [open foo r]
    set f3 [open foo r]
    set f4 [open foo r]
    fileevent $f readable {script 1}
    testfevent create
    testfevent share $f2
    testfevent share $f3
    testfevent cmd "fileevent $f2 readable {script 2}
        fileevent $f3 readable {script 3}"
    fileevent $f4 readable {script 4}
    testfevent delete
    set x [list [fileevent $f readable] [fileevent $f2 readable] \
                [fileevent $f3 readable] [fileevent $f4 readable]]
    close $f
    close $f2
    close $f3
    close $f4
    set x
} {{script 1} {} {} {script 4}}
test io-24.3 {deleting fileevent on interpreter delete} {
    set f [open foo r]
    set f2 [open foo r]
    set f3 [open foo r]
    set f4 [open foo r]
    testfevent create
    testfevent share $f3
    testfevent share $f4
    fileevent $f readable {script 1}
    fileevent $f2 readable {script 2}
    testfevent cmd "fileevent $f3 readable {script 3}
      fileevent $f4 readable {script 4}"
    testfevent delete
    set x [list [fileevent $f readable] [fileevent $f2 readable] \
                [fileevent $f3 readable] [fileevent $f4 readable]]
    close $f
    close $f2
    close $f3
    close $f4
    set x
} {{script 1} {script 2} {} {}}
test io-24.4 {file events on shared files and multiple interpreters} {
    set f [open foo r]
    set f2 [open foo r]
    testfevent create
    testfevent share $f
    testfevent cmd "fileevent $f readable {script 1}"
    fileevent $f readable {script 2}
    fileevent $f2 readable {script 3}
    set x [list [fileevent $f2 readable] \
                [testfevent cmd "fileevent $f readable"] \
                [fileevent $f readable]]
    testfevent delete
    close $f
    close $f2
    set x
} {{script 3} {script 1} {script 2}}
test io-24.5 {file events on shared files, deleting file events} {
    set f [open foo r]
    testfevent create
    testfevent share $f
    testfevent cmd "fileevent $f readable {script 1}"
    fileevent $f readable {script 2}
    testfevent cmd "fileevent $f readable {}"
    set x [list [testfevent cmd "fileevent $f readable"] \
                [fileevent $f readable]]
    testfevent delete
    close $f
    set x
} {{} {script 2}}
test io-24.6 {file events on shared files, deleting file events} {
    set f [open foo r]
    testfevent create
    testfevent share $f
    testfevent cmd "fileevent $f readable {script 1}"
    fileevent $f readable {script 2}
    fileevent $f readable {}
    set x [list [testfevent cmd "fileevent $f readable"] \
                [fileevent $f readable]]
    testfevent delete
    close $f
    set x
} {{script 1} {}}
 
}
 
# The above curly closes the test for presence of the "testfevent" command.
 
test io-25.1 {testing readability conditions} {
    set f [open bar w]
    puts $f abcdefg
    puts $f abcdefg
    puts $f abcdefg
    puts $f abcdefg
    puts $f abcdefg
    close $f
    set f [open bar r]
    fileevent $f readable [list consume $f]
    proc consume {f} {
        global x l
        lappend l called
        if {[eof $f]} {
            close $f
            set x done
        } else {
            gets $f
        }
    }
    set l ""
    set x not_done
    vwait x
    list $x $l
} {done {called called called called called called called}}
test io-25.2 {testing readability conditions} {nonBlockFiles} {
    set f [open bar w]
    puts $f abcdefg
    puts $f abcdefg
    puts $f abcdefg
    puts $f abcdefg
    puts $f abcdefg
    close $f
    set f [open bar r]
    fileevent $f readable [list consume $f]
    fconfigure $f -blocking off
    proc consume {f} {
        global x l
        lappend l called
        if {[eof $f]} {
            close $f
            set x done
        } else {
            gets $f
        }
    }
    set l ""
    set x not_done
    vwait x
    list $x $l
} {done {called called called called called called called}}
test io-25.3 {testing readability conditions} {unixOnly nonBlockFiles} {
    set f [open bar w]
    puts $f abcdefg
    puts $f abcdefg
    puts $f abcdefg
    puts $f abcdefg
    puts $f abcdefg
    close $f
    set f [open my_script w]
    puts $f {
        proc copy_slowly {f} {
            while {![eof $f]} {
                puts [gets $f]
                after 200
            }
            close $f
        }
    }
    close $f
    set f [open "|[list $tcltest]" r+]
    fileevent $f readable [list consume $f]
    fconfigure $f -buffering line
    fconfigure $f -blocking off
    proc consume {f} {
        global x l
        if {[eof $f]} {
            set x done
        } else {
            gets $f
            lappend l [fblocked $f]
            gets $f
            lappend l [fblocked $f]
        }
    }
    set l ""
    set x not_done
    puts $f {source my_script}
    puts $f {set f [open bar r]}
    puts $f {copy_slowly $f}
    puts $f {exit}
    vwait x
    close $f
    list $x $l
} {done {0 1 0 1 0 1 0 1 0 1 0 1 0 0}}
test io-25.4 {lf write, testing readability, ^Z termination, auto read mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set c [format "abc\ndef\n%c" 26]
    puts -nonewline $f $c
    close $f
    proc consume {f} {
        global c x l
        if {[eof $f]} {
           set x done
           close $f
        } else {
           lappend l [gets $f]
           incr c
        }
    }
    set c 0
    set l ""
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    fileevent $f readable [list consume $f]
    vwait x
    list $c $l
} {3 {abc def {}}}
test io-25.5 {lf write, testing readability, ^Z in middle, auto read mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set c [format "abc\ndef\n%cfoo\nbar\n" 26]
    puts -nonewline $f $c
    close $f
    proc consume {f} {
        global c x l
        if {[eof $f]} {
           set x done
           close $f
        } else {
           lappend l [gets $f]
           incr c
        }
    }
    set c 0
    set l ""
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation auto
    fileevent $f readable [list consume $f]
    vwait x
    list $c $l
} {3 {abc def {}}}
test io-25.6 {cr write, testing readability, ^Z termination, auto read mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    set c [format "abc\ndef\n%c" 26]
    puts -nonewline $f $c
    close $f
    proc consume {f} {
        global c x l
        if {[eof $f]} {
           set x done
           close $f
        } else {
           lappend l [gets $f]
           incr c
        }
    }
    set c 0
    set l ""
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    fileevent $f readable [list consume $f]
    vwait x
    list $c $l
} {3 {abc def {}}}
test io-25.7 {cr write, testing readability, ^Z in middle, auto read mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    set c [format "abc\ndef\n%cfoo\nbar\n" 26]
    puts -nonewline $f $c
    close $f
    proc consume {f} {
        global c x l
        if {[eof $f]} {
           set x done
           close $f
        } else {
           lappend l [gets $f]
           incr c
        }
    }
    set c 0
    set l ""
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation auto
    fileevent $f readable [list consume $f]
    vwait x
    list $c $l
} {3 {abc def {}}}
test io-25.8 {crlf write, testing readability, ^Z termination, auto read mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    set c [format "abc\ndef\n%c" 26]
    puts -nonewline $f $c
    close $f
    proc consume {f} {
        global c x l
        if {[eof $f]} {
           set x done
           close $f
        } else {
           lappend l [gets $f]
           incr c
        }
    }
    set c 0
    set l ""
    set f [open test1 r]
    fconfigure $f -translation auto -eofchar \x1a
    fileevent $f readable [list consume $f]
    vwait x
    list $c $l
} {3 {abc def {}}}
test io-25.9 {crlf write, testing readability, ^Z in middle, auto read mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    set c [format "abc\ndef\n%cfoo\nbar\n" 26]
    puts -nonewline $f $c
    close $f
    proc consume {f} {
        global c x l
        if {[eof $f]} {
           set x done
           close $f
        } else {
           lappend l [gets $f]
           incr c
        }
    }
    set c 0
    set l ""
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation auto
    fileevent $f readable [list consume $f]
    vwait x
    list $c $l
} {3 {abc def {}}}
test io-25.10 {lf write, testing readability, ^Z in middle, lf read mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set c [format "abc\ndef\n%cfoo\nbar\n" 26]
    puts -nonewline $f $c
    close $f
    proc consume {f} {
        global c x l
        if {[eof $f]} {
           set x done
           close $f
        } else {
           lappend l [gets $f]
           incr c
        }
    }
    set c 0
    set l ""
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation lf
    fileevent $f readable [list consume $f]
    vwait x
    list $c $l
} {3 {abc def {}}}
test io-25.11 {lf write, testing readability, ^Z termination, lf read mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    set c [format "abc\ndef\n%c" 26]
    puts -nonewline $f $c
    close $f
    proc consume {f} {
        global c x l
        if {[eof $f]} {
           set x done
           close $f
        } else {
           lappend l [gets $f]
           incr c
        }
    }
    set c 0
    set l ""
    set f [open test1 r]
    fconfigure $f -translation lf -eofchar \x1a
    fileevent $f readable [list consume $f]
    vwait x
    list $c $l
} {3 {abc def {}}}
test io-25.12 {cr write, testing readability, ^Z in middle, cr read mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    set c [format "abc\ndef\n%cfoo\nbar\n" 26]
    puts -nonewline $f $c
    close $f
    proc consume {f} {
        global c x l
        if {[eof $f]} {
           set x done
           close $f
        } else {
           lappend l [gets $f]
           incr c
        }
    }
    set c 0
    set l ""
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation cr
    fileevent $f readable [list consume $f]
    vwait x
    list $c $l
} {3 {abc def {}}}
test io-25.13 {cr write, testing readability, ^Z termination, cr read mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation cr
    set c [format "abc\ndef\n%c" 26]
    puts -nonewline $f $c
    close $f
    proc consume {f} {
        global c x l
        if {[eof $f]} {
           set x done
           close $f
        } else {
           lappend l [gets $f]
           incr c
        }
    }
    set c 0
    set l ""
    set f [open test1 r]
    fconfigure $f -translation cr -eofchar \x1a
    fileevent $f readable [list consume $f]
    vwait x
    list $c $l
} {3 {abc def {}}}
test io-25.14 {crlf write, testing readability, ^Z in middle, crlf read mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    set c [format "abc\ndef\n%cfoo\nbar\n" 26]
    puts -nonewline $f $c
    close $f
    proc consume {f} {
        global c x l
        if {[eof $f]} {
           set x done
           close $f
        } else {
           lappend l [gets $f]
           incr c
        }
    }
    set c 0
    set l ""
    set f [open test1 r]
    fconfigure $f -eofchar \x1a -translation crlf
    fileevent $f readable [list consume $f]
    vwait x
    list $c $l
} {3 {abc def {}}}
test io-25.15 {crlf write, testing readability, ^Z termi, crlf read mode} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation crlf
    set c [format "abc\ndef\n%c" 26]
    puts -nonewline $f $c
    close $f
    proc consume {f} {
        global c x l
        if {[eof $f]} {
           set x done
           close $f
        } else {
           lappend l [gets $f]
           incr c
        }
    }
    set c 0
    set l ""
    set f [open test1 r]
    fconfigure $f -translation crlf -eofchar \x1a
    fileevent $f readable [list consume $f]
    vwait x
    list $c $l
} {3 {abc def {}}}
 
test io-26.1 {testing crlf reading, leftover cr disgorgment} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts -nonewline $f "a\rb\rc\r\n"
    close $f
    set f [open test1 r]
    set l ""
    lappend l [file size test1]
    fconfigure $f -translation crlf
    lappend l [read $f 1]
    lappend l [tell $f]
    lappend l [read $f 1]
    lappend l [tell $f]
    lappend l [read $f 1]
    lappend l [tell $f]
    lappend l [read $f 1]
    lappend l [tell $f]
    lappend l [read $f 1]
    lappend l [tell $f]
    lappend l [read $f 1]
    lappend l [tell $f]
    lappend l [eof $f]
    lappend l [read $f 1]
    lappend l [eof $f]
    close $f
    set l
} "7 a 1 [list \r] 2 b 3 [list \r] 4 c 5 {
} 7 0 {} 1"
test io-26.2 {testing crlf reading, leftover cr disgorgment} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts -nonewline $f "a\rb\rc\r\n"
    close $f
    set f [open test1 r]
    set l ""
    lappend l [file size test1]
    fconfigure $f -translation crlf
    lappend l [read $f 2]
    lappend l [tell $f]
    lappend l [read $f 2]
    lappend l [tell $f]
    lappend l [read $f 2]
    lappend l [tell $f]
    lappend l [eof $f]
    lappend l [read $f 2]
    lappend l [tell $f]
    lappend l [eof $f]
    close $f
    set l
} "7 [list a\r] 2 [list b\r] 4 [list c\n] 7 0 {} 7 1"
test io-26.3 {testing crlf reading, leftover cr disgorgment} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts -nonewline $f "a\rb\rc\r\n"
    close $f
    set f [open test1 r]
    set l ""
    lappend l [file size test1]
    fconfigure $f -translation crlf
    lappend l [read $f 3]
    lappend l [tell $f]
    lappend l [read $f 3]
    lappend l [tell $f]
    lappend l [eof $f]
    lappend l [read $f 3]
    lappend l [tell $f]
    lappend l [eof $f]
    close $f
    set l
} "7 [list a\rb] 3 [list \rc\n] 7 0 {} 7 1"
test io-26.4 {testing crlf reading, leftover cr disgorgment} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts -nonewline $f "a\rb\rc\r\n"
    close $f
    set f [open test1 r]
    set l ""
    lappend l [file size test1]
    fconfigure $f -translation crlf
    lappend l [read $f 3]
    lappend l [tell $f]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [eof $f]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [eof $f]
    close $f
    set l
} "7 [list a\rb] 3 [list \rc] 7 0 {} 7 1"
test io-26.5 {testing crlf reading, leftover cr disgorgment} {
    removeFile test1
    set f [open test1 w]
    fconfigure $f -translation lf
    puts -nonewline $f "a\rb\rc\r\n"
    close $f
    set f [open test1 r]
    set l ""
    lappend l [file size test1]
    fconfigure $f -translation crlf
    lappend l [set x [gets $f]]
    lappend l [tell $f]
    lappend l [gets $f]
    lappend l [tell $f]
    lappend l [eof $f]
    close $f
    set l
} [list 7 a\rb\rc 7 {} 7 1]
 
test io-27.1 {testing handler deletion} {
    removeFile test1
    set f [open test1 w]
    close $f
    set f [open test1 r]
    testchannelevent $f add readable [list delhandler $f]
    proc delhandler {f} {
        global z
        set z called
        testchannelevent $f delete 0
    }
    set z not_called
    update
    close $f
    set z
} called
test io-27.2 {testing handler deletion with multiple handlers} {
    removeFile test1
    set f [open test1 w]
    close $f
    set f [open test1 r]
    testchannelevent $f add readable [list delhandler $f 1]
    testchannelevent $f add readable [list delhandler $f 0]
    proc delhandler {f i} {
        global z
        lappend z "called delhandler $f $i"
        testchannelevent $f delete 0
    }
    set z ""
    update
    close $f
    string compare [string tolower $z] \
        [list [list called delhandler $f 0] [list called delhandler $f 1]]
} 0
test io-27.3 {testing handler deletion with multiple handlers} {
    removeFile test1
    set f [open test1 w]
    close $f
    set f [open test1 r]
    testchannelevent $f add readable [list notcalled $f 1]
    testchannelevent $f add readable [list delhandler $f 0]
    set z ""
    proc notcalled {f i} {
        global z
        lappend z "notcalled was called!! $f $i"
    }
    proc delhandler {f i} {
        global z
        testchannelevent $f delete 1
        lappend z "delhandler $f $i called"
        testchannelevent $f delete 0
        lappend z "delhandler $f $i deleted myself"
    }
    set z ""
    update
    close $f
    string compare [string tolower $z] \
        [list [list delhandler $f 0 called] \
              [list delhandler $f 0 deleted myself]]
} 0
test io-27.4 {testing handler deletion vs reentrant calls} {
    removeFile test1
    set f [open test1 w]
    close $f
    set f [open test1 r]
    testchannelevent $f add readable [list delrecursive $f]
    proc delrecursive {f} {
        global z u
        if {"$u" == "recursive"} {
            testchannelevent $f delete 0
            lappend z "delrecursive deleting recursive"
        } else {
            lappend z "delrecursive calling recursive"
            set u recursive
            update
        }
    }
    set u toplevel
    set z ""
    update
    close $f
    string compare [string tolower $z] \
        {{delrecursive calling recursive} {delrecursive deleting recursive}}
} 0
test io-27.5 {testing handler deletion vs reentrant calls} {
    removeFile test1
    set f [open test1 w]
    close $f
    set f [open test1 r]
    testchannelevent $f add readable [list notcalled $f]
    testchannelevent $f add readable [list del $f]
    proc notcalled {f} {
        global z
        lappend z "notcalled was called!! $f"
    }
    proc del {f} {
        global z u
        if {"$u" == "recursive"} {
            testchannelevent $f delete 1
            testchannelevent $f delete 0
            lappend z "del deleted notcalled"
            lappend z "del deleted myself"
        } else {
            set u recursive
            lappend z "del calling recursive"
            update
            lappend z "del after update"
        }
    }
    set z ""
    set u toplevel
    update
    close $f
    string compare [string tolower $z] \
        [list {del calling recursive} {del deleted notcalled} \
              {del deleted myself} {del after update}]
} 0
test io-27.6 {testing handler deletion vs reentrant calls} {
    removeFile test1
    set f [open test1 w]
    close $f
    set f [open test1 r]
    testchannelevent $f add readable [list second $f]
    testchannelevent $f add readable [list first $f]
    proc first {f} {
        global u z
        if {"$u" == "toplevel"} {
            lappend z "first called"
            set u first
            update
            lappend z "first after update"
        } else {
            lappend z "first called not toplevel"
        }
    }
    proc second {f} {
        global u z
        if {"$u" == "first"} {
            lappend z "second called, first time"
            set u second
            testchannelevent $f delete 0
        } elseif {"$u" == "second"} {
            lappend z "second called, second time"
            testchannelevent $f delete 0
        } else {
            lappend z "second called, cannot happen!"
            testchannelevent $f removeall
        }
    }
    set z ""
    set u toplevel
    update
    close $f
    string compare [string tolower $z] \
        [list {first called} {first called not toplevel} \
              {second called, first time} {second called, second time} \
              {first after update}]
} 0
 
test io-28.1 {Test old socket deletion on Macintosh} {socket} {
    set x 0
    set result ""
    proc accept {s a p} {
        global x wait
        fconfigure $s -blocking off
        puts $s "sock[incr x]"
        close $s
        set wait done
    }
    set ss [socket -server accept 2831]
    set wait ""
    set cs [socket [info hostname] 2831]
    vwait wait
    lappend result [gets $cs]
    close $cs
 
    set wait ""
    set cs [socket [info hostname] 2831]
    vwait wait
    lappend result [gets $cs]
    close $cs
 
    set wait ""
    set cs [socket [info hostname] 2831]
    vwait wait
    lappend result [gets $cs]
    close $cs
 
    set wait ""
    set cs [socket [info hostname] 2831]
    vwait wait
    lappend result [gets $cs]
    close $cs
    close $ss
    set result
} {sock1 sock2 sock3 sock4}
 
test io-29.1 {TclCopyChannel} {
    removeFile test1
    set f1 [open [info script]]
    set f2 [open test1 w]
    fcopy $f1 $f2 -command { # }
    catch { fcopy $f1 $f2 } msg
    close $f1
    close $f2
    string compare $msg "channel \"$f1\" is busy"
} {0}
test io-29.2 {TclCopyChannel} {
    removeFile test1
    set f1 [open [info script]]
    set f2 [open test1 w]
    set f3 [open [info script]]
    fcopy $f1 $f2 -command { # }
    catch { fcopy $f3 $f2 } msg
    close $f1
    close $f2
    close $f3
    string compare $msg "channel \"$f2\" is busy"
} {0}
test io-29.3 {TclCopyChannel} {
    removeFile test1
    set f1 [open [info script]]
    set f2 [open test1 w]
    fconfigure $f1 -translation lf -blocking 0
    fconfigure $f2 -translation cr -blocking 0
    set s0 [fcopy $f1 $f2]
    set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]]
    close $f1
    close $f2
    set s1 [file size [info script]]
    set s2 [file size test1]
    if {("$s1" == "$s2") && ($s0 == $s1)} {
        lappend result ok
    }
    set result
} {0 0 ok}
test io-29.4 {TclCopyChannel} {
    removeFile test1
    set f1 [open [info script]]
    set f2 [open test1 w]
    fconfigure $f1 -translation lf -blocking 0
    fconfigure $f2 -translation cr -blocking 0
    fcopy $f1 $f2 -size 40
    set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]]
    close $f1
    close $f2
    lappend result [file size test1]
} {0 0 40}
test io-29.5 {TclCopyChannel} {
    removeFile test1
    set f1 [open [info script]]
    set f2 [open test1 w]
    fconfigure $f1 -translation lf -blocking 0
    fconfigure $f2 -translation lf -blocking 0
    fcopy $f1 $f2 -size -1
    set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]]
    close $f1
    close $f2
    set s1 [file size [info script]]
    set s2 [file size test1]
    if {"$s1" == "$s2"} {
        lappend result ok
    }
    set result
} {0 0 ok}
test io-29.6 {TclCopyChannel} {
    removeFile test1
    set f1 [open [info script]]
    set f2 [open test1 w]
    fconfigure $f1 -translation lf -blocking 0
    fconfigure $f2 -translation lf -blocking 0
    set s0 [fcopy $f1 $f2 -size [expr [file size [info script]] + 5]]
    set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]]
    close $f1
    close $f2
    set s1 [file size [info script]]
    set s2 [file size test1]
    if {("$s1" == "$s2") && ($s0 == $s1)} {
        lappend result ok
    }
    set result
} {0 0 ok}
test io-29.7 {TclCopyChannel} {
    removeFile test1
    set f1 [open [info script]]
    set f2 [open test1 w]
    fconfigure $f1 -translation lf -blocking 0
    fconfigure $f2 -translation lf -blocking 0
    fcopy $f1 $f2
    set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]]
    set s1 [file size [info script]]
    set s2 [file size test1]
    close $f1
    close $f2
    if {"$s1" == "$s2"} {
        lappend result ok
    }
    set result
} {0 0 ok}
test io-29.8 {TclCopyChannel} {stdio} {
    removeFile test1
    removeFile pipe
    set f1 [open pipe w]
    fconfigure $f1 -translation lf
    puts $f1 {
        puts ready
        gets stdin
        set f1 [open [info script] r]
        fconfigure $f1 -translation lf
        puts [read $f1 100]
        close $f1
    }
    close $f1
    set f1 [open "|[list $tcltest pipe]" r+]
    fconfigure $f1 -translation lf
    gets $f1
    puts $f1 ready
    flush $f1
    set f2 [open test1 w]
    fconfigure $f2 -translation lf
    set s0 [fcopy $f1 $f2 -size 40]
    catch {close $f1}
    close $f2
    list $s0 [file size test1]
} {40 40}
 
test io-30.1 {CopyData} {
    removeFile test1
    set f1 [open [info script]]
    set f2 [open test1 w]
    fconfigure $f1 -translation lf -blocking 0
    fconfigure $f2 -translation cr -blocking 0
    fcopy $f1 $f2 -size 0
    set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]]
    close $f1
    close $f2
    lappend result [file size test1]
} {0 0 0}
test io-30.2 {CopyData} {
    removeFile test1
    set f1 [open [info script]]
    set f2 [open test1 w]
    fconfigure $f1 -translation lf -blocking 0
    fconfigure $f2 -translation cr -blocking 0
    fcopy $f1 $f2 -command {set s0}
    set result [list [fconfigure $f1 -blocking] [fconfigure $f2 -blocking]]
    vwait s0
    close $f1
    close $f2
    set s1 [file size [info script]]
    set s2 [file size test1]
    if {("$s1" == "$s2") && ($s0 == $s1)} {
        lappend result ok
    }
    set result
} {0 0 ok}
test io-30.3 {CopyData: background read underflow} {unixOnly} {
    removeFile test1
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {
        puts ready
        flush stdout                            ;# Don't assume line buffered!
        fcopy stdin stdout -command { set x }
        vwait x
        set f [open test1 w]
        fconfigure $f -translation lf
        puts $f "done"
        close $f
    }
    close $f1
    set f1 [open "|[list $tcltest pipe]" r+]
    set result [gets $f1]
    puts $f1 line1
    flush $f1
    lappend result [gets $f1]
    puts $f1 line2
    flush $f1
    lappend result [gets $f1]
    close $f1
    after 500
    set f [open test1]
    lappend result [read $f]
    close $f
    set result
} "ready line1 line2 {done\n}"
test io-30.4 {CopyData: background write overflow} {unixOnly} {
    set big aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa\n
    for {set x 0} {$x < 12} {incr x} {
        append big $big
    }
    removeFile test1
    removeFile pipe
    set f1 [open pipe w]
    puts $f1 {
        puts ready
        fcopy stdin stdout -command { set x }
        vwait x
        set f [open test1 w]
        fconfigure $f -translation lf
        puts $f "done"
        close $f
    }
    close $f1
    set f1 [open "|[list $tcltest pipe]" r+]
    set result [gets $f1]
    fconfigure $f1 -blocking 0
    puts $f1 $big
    flush $f1
    after 500
    set result ""
    fileevent $f1 read {
        append result [read $f1 1024]
        if {[string length $result] >= [string length $big]} {
            set x done
        }
    }
    vwait x
    close $f1
    set big {}
    set x
} done
 
proc FcopyTestAccept {sock args} {
    after 1000 "close $sock"
}
proc FcopyTestDone {bytes {error {}}} {
    global fcopyTestDone
    if {[string length $error]} {
        set fcopyTestDone 1
    } else {
        set fcopyTestDone 0
    }
}
if [catch {socket -server FcopyTestAccept 2828} listen] {
    puts stderr "Skipping fcopy error test"
} else {
    test io-30.5 {CopyData: error during fcopy} {
        set in [open [info script]]     ;# 126 K
        set out [socket localhost 2828]
        catch {unset fcopyTestDone}
        close $listen   ;# This means the socket open never really succeeds
        fcopy $in $out -command FcopyTestDone
        if ![info exists fcopyTestDone] {
            vwait fcopyTestDone         ;# The error occurs here in the b.g.
        }
        close $in
        close $out
        set fcopyTestDone       ;# 1 for error condition
    } 1
}
test io-30.6 {CopyData: error during fcopy} {stdio} {
    removeFile pipe
    removeFile test1
    catch {unset fcopyTestDone}
    set f1 [open pipe w]
    puts $f1 "exit 1"
    close $f1
    set in [open "|[list $tcltest pipe]" r+]
    set out [open test1 w]
    fcopy $in $out -command [list FcopyTestDone]
    if ![info exists fcopyTestDone] {
        vwait fcopyTestDone
    }
    catch {close $in}
    close $out
    set fcopyTestDone   ;# 0 for plain end of file
} {0}
 
test io-31.1 {Recursive channel events} {socket} {
    # This test checks to see if file events are delivered during recursive
    # event loops when there is buffered data on the channel.
 
    proc accept {s a p} {
        global as
        fconfigure $s -translation lf
        puts $s "line 1\nline2\nline3"
        flush $s
        set as $s
    }
    proc readit {s next} {
        global result x
        lappend result $next
        if {$next == 1} {
            fileevent $s readable [list readit $s 2]
            vwait x
        }
        incr x
    }
    set ss [socket -server accept 2828]
 
    # We need to delay on some systems until the creation of the
    # server socket completes.
 
    set done 0
    for {set i 0} {$i < 10} {incr i} {
        if {![catch {set cs [socket [info hostname] 2828]}]} {
            set done 1
            break
        }
        after 100
    }
    if {$done == 0} {
        close $ss
        error "failed to connect to server"
    }
    set result {}
    set x 0
    vwait as
    fconfigure $cs -translation lf
    lappend result [gets $cs]
    fconfigure $cs -blocking off
    fileevent $cs readable [list readit $cs 1]
    set a [after 2000 { set x failure }]
    vwait x
    after cancel $a
    close $as
    close $ss
    close $cs
    list $result $x
} {{{line 1} 1 2} 2}
test io-31.2 {Testing for busy-wait in recursive channel events} {socket} {
    set s [socket -server accept 3939]
    proc accept {s a p} {
        global counter
 
        set counter 0
        fconfigure $s -blocking off -buffering line -translation lf
        fileevent $s readable "doit $s"
    }
    proc doit {s} {
        global counter
 
        incr counter
        set l [gets $s]
        if {"$l" == ""} {
            fileevent $s readable "doit1 $s"
            after 1000 newline
        }
    }
    proc doit1 {s} {
        global counter
 
        incr counter
        set l [gets $s]
        close $s
    }
    proc producer {} {
        global writer
 
        set writer [socket localhost 3939]
        fconfigure $writer -buffering line
        puts -nonewline $writer hello
        flush $writer
    }
    proc newline {} {
        global writer done
 
        puts $writer hello
        flush $writer
        set done 1
    }
    producer
    vwait done
    close $writer
    close $s
    set counter
} 1
test io-32.1 {ChannelEventScriptInvoker: deletion} {
    proc eventScript {fd} {
        close $fd
        error "planned error"
        set ::x whoops
    }
    proc bgerror {args} {
        set ::x got_error
    }
    set f [open fooBar w]
    fileevent $f writable [list eventScript $f]
    set x not_done
    vwait x
    set x
} {got_error}
 
test io-33.1 {ChannelTimerProc} {
    set f [open fooBar w]
    puts $f "this is a test"
    close $f
    set f [open fooBar r]
    testchannelevent $f add readable {
        read $f 1
        incr x
    }
    set x 0
    vwait x
    vwait x
    set result $x
    testchannelevent $f set 0 none
    after idle {set y done}
    vwait y
    close $f
    lappend result $y
} {2 done}
 
test io-34.1 {buffered data and file events, gets} {
    proc accept {sock args} {
        set ::s2 $sock
    }
    set server [socket -server accept 4040]
    set s [socket localhost 4040]
    vwait s2
    update
    fileevent $s2 readable {lappend result readable}
    puts $s "12\n34567890"
    flush $s
    set result [gets $s2]
    after 1000 {lappend result timer}
    vwait result
    lappend result [gets $s2]
    vwait result
    close $s
    close $s2
    close $server
    set result
} {12 readable 34567890 timer}
test io-34.2 {buffered data and file events, read} {
    proc accept {sock args} {
        set ::s2 $sock
    }
    set server [socket -server accept 4041]
    set s [socket localhost 4041]
    vwait s2
    update
    fileevent $s2 readable {lappend result readable}
    puts -nonewline $s "1234567890"
    flush $s
    set result [read $s2 1]
    after 1000 {lappend result timer}
    vwait result
    lappend result [read $s2 9]
    vwait result
    close $s
    close $s2
    close $server
    set result
} {1 readable 234567890 timer}
 
test io-35.1 {Tcl_NotifyChannel and error when closing} {unixOrPc} {
    set out [open script w]
    puts $out {
        puts "normal message from pipe"
        puts stderr "error message from pipe"
        exit 1
    }
    proc readit {pipe} {
        global x result
        if {[eof $pipe]} {
            set x [catch {close $pipe} line]
            lappend result catch $line
        } else {
            gets $pipe line
            lappend result gets $line
        }
    }
    close $out
    set pipe [open "|[list $tcltest] script" r]
    fileevent $pipe readable [list readit $pipe]
    set x ""
    set result ""
    vwait x
    list $x $result
} {1 {gets {normal message from pipe} gets {} catch {error message from pipe}}}
 
 
removeFile fooBar
removeFile longfile
removeFile script
removeFile output
removeFile test1
removeFile pipe
removeFile my_script
removeFile foo
removeFile bar
removeFile test2
removeFile test3
 
file delete cat
 
set x ""
unset x
Browse

Tools

Subversion Repositories or1k

[/] [or1k/] [trunk/] [insight/] [tcl/] [tests/] [io.test] - Blame information for rev 1765

Line No.	Rev	Author	Line
1	578	markom	`# Functionality covered: operation of all IO commands, and all procedures`
2			`# defined in generic/tclIO.c.`
3			`#`
4			`# This file contains a collection of tests for one or more of the Tcl`
5			`# built-in commands. Sourcing this file into Tcl runs the tests and`
6			`# generates output for errors. No output means no errors were found.`
7			`#`
8			`# Copyright (c) 1991-1994 The Regents of the University of California.`
9			`# Copyright (c) 1994-1997 Sun Microsystems, Inc.`
10			`#`
11			`# See the file "license.terms" for information on usage and redistribution`
12			`# of this file, and for a DISCLAIMER OF ALL WARRANTIES.`
13			`#`
14			`# RCS: @(#) $Id: io.test,v 1.1.1.1 2002-01-16 10:25:36 markom Exp $`
15
16			`if {[string compare test [info procs test]] == 1} then {source defs}`
17
18			`if {"[info commands testchannel]" != "testchannel"} {`
19			`puts "Skipping io tests. This application does not seem to have the"`
20			`puts "testchannel command that is needed to run these tests."`
21			`return`
22			`}`
23
24			`removeFile test1`
25			`removeFile pipe`
26
27			`# set up a long data file for some of the following tests`
28
29			`set f [open longfile w]`
30			`fconfigure $f -eofchar {} -translation lf`
31			`for { set i 0 } { $i < 100 } { incr i} {`
32			`puts $f "#123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef`
33			`\#123456789abcdef01`
34			`\#"`
35			`}`
36			`close $f`
37
38			`set f [open cat w]`
39			`puts $f {`
40			`if {$argv == {}} {`