Subversion Repositories or1k

;******************************************************************************

;* Copyright 1991 Advanced Micro Devices, Inc.

;*

;* This software is the property of Advanced Micro Devices, Inc  (AMD)  which

;* specifically  grants the user the right to modify, use and distribute this

;* software provided this notice is not removed or altered.  All other rights

;* are reserved by AMD.

;*

;* AMD MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS

;* SOFTWARE.  IN NO EVENT SHALL AMD BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL

;* DAMAGES IN CONNECTION WITH OR ARISING FROM THE FURNISHING, PERFORMANCE, OR

;* USE OF THIS SOFTWARE.

;*

;* Comments about this software should be directed to udi@amd.com. If access

;* to electronic mail isn't available, send mail to:

;*

;* Advanced Micro Devices, Inc.

;* 29K Support Products

;* Mail Stop 573

;* 5900 E. Ben White Blvd.

;* Austin, TX 78741

;* 800-292-9263

;*****************************************************************************

;*       $Id: dostip.asm,v 1.1.1.1 2002-01-16 10:26:06 markom Exp $

;*       $Id: @(#)dostip.asm    2.7, AMD

;******************************************************************************

;*/

IFNDEF DOS386

        DOSSEG

        .MODEL  LARGE

        PUBLIC  _UDIASMConnect

        PUBLIC  _UDIASMDisconnect

        EXTRN   _UDICDisconnect:FAR

        EXTRN   _UDICConnect:FAR

        .CODE

ELSE

;

; Segment ordering and attributes for DOS386.  We make sure the

; real mode code and data comes first.  The real and

; prot mode data are together so they can be grouped.

;

rmcode  segment byte public use16

; We need to mark the first byte in rmcode to figure the real segment value

        public   rmcode_firstbyte

rmcode_firstbyte        label byte

rmcode  ends

rmdata  segment dword public use16

rmdata  ends

pmdata  segment dword public use32

pmdata  ends

pmcode  segment byte public use32

pmcode  ends

dgroup  group   rmdata,pmdata

rmcode segment          ; _UDIASMDisconnect will be in rmcode segment

ENDIF

        INCLUDE udidos.ah               ; TermStruct Definitions from DFE

_UDIASMDisconnect    LABEL   FAR

;

; Save off important stuff in structure whose address

; is given as third parameter to this function.

        mov     bx, sp

        les     bx, ss:8[bx]

        mov     es:[bx].sss, ss

        mov     es:[bx].ssp, sp

        mov     es:[bx].ssi, si

        mov     es:[bx].sdi, di

        mov     es:[bx].sbp, bp

        mov     es:[bx].sds, ds

IFNDEF DOS386

        jmp     _UDICDisconnect         ; real mode, just jump to the C routine

ELSE

        jmp     rm_UDIDisconnect        ; DOS386, jump to the real mode stub

ENDIF

_UDIASMConnect    LABEL   FAR

;

; Save off important stuff in structure whose address

; is given as third parameter to this function.

        mov     bx, sp

        les     bx, ss:12[bx]

        mov     es:[bx].sss, ss

        mov     es:[bx].ssp, sp

        mov     es:[bx].ssi, si

        mov     es:[bx].sdi, di

        mov     es:[bx].sbp, bp

        mov     es:[bx].sds, ds

IFNDEF DOS386

        jmp     _UDICConnect            ; real mode, just jump to the C routine

ELSE

        jmp     rm_UDIConnect           ; DOS386, jump to the real mode stub

ENDIF

IFDEF DOS386

        ; Note: the rest of this file is just DOS386 support

rmcode ends

;

; Data that needs to be accessed in both real

; mode and protected mode

;

rmdata  segment

        public code_selector, data_selector, call_prot

        public  segregblock

        ; these get filled in by protected mode startup code

code_selector  DW ?

data_selector  DW ?

call_prot       DD ?

segregblock     DW ?    ; ds value      ; seg reg block filled in at startup time

                DW ?    ; es value

                DW ?    ; fs value

                DW ?    ; gs value

        public TIPName

TIPName         DB  256 DUP(?)

        public TIPVecRec

TIPVecRec       DB  0,0,0,0     ; will get filled in by main

                DD  0           ; next ptr

                DD  0           ; prev ptr

                DD  TIPName     ; exeName

                                ; the other entries get added by the udi_table macro below

TIPVecRecEnd    LABEL BYTE

rmdata  ends

;

; Data that is only accessed in prot mode

;

        extrn  conventional_memory:DWORD        ; set up by dx_map_physical

        extrn  stack_table: DWORD               ; set up by C-level code.

pmdata   segment

dos386glue_table LABEL DWORD    ; so we can reference it later in the udi_table macro

                                ; the entries get added by the udi_table macro below

pmdata   ends

;; The udi_table macro does three things

;;      1) generates real mode entry point for each UDI function

;;         This code just sets an index in bl and jumps to rm_common

;;      2) adds an entry into the TIPVecRec to point to the above real mode entry point

;;      3) adds an entry into the dos386glue_table table which is used by the prot.mode stub

;;         to call the actual C glue routine.

udi_table       MACRO   UDIProcName,val

rmcode segment

        public  rm_&UDIProcName

rm_&UDIProcName LABEL NEAR

        mov     bl, val         ;; bl will indicate which UDI Proc was called

        jmp     short rm_common

rmcode  ends

rmdata segment

        ORG     TIPVecRec + 16 + 4*val  ;; Entry in TIPVecRec (+16 for first 4 fields)

        IF      val EQ 0

        DD      _UDIASMConnect          ;; special case for Connect

        ELSE

        IF      val EQ 1

        DD      _UDIASMDisconnect       ;; special case for Disconnect

        ELSE

        DD      rm_&UDIProcName		;; normal entry is rm_ stub

        ENDIF

        ENDIF

rmdata ends

pmdata segment

        EXTRN   d386_&UDIProcName:NEAR

        ORG     dos386glue_table + 4*val        ;; this builds the jump table that pmstub uses

        DD      d386_&UDIProcName

pmdata ends

        ENDM

        udi_table   UDIConnect,0

        udi_table   UDIDisconnect,1

        udi_table   UDISetCurrentConnection,2

        udi_table   UDICapabilities,3

        udi_table   UDIGetErrorMsg,4

        udi_table   UDIGetTargetConfig,5

        udi_table   UDICreateProcess,6

        udi_table   UDISetCurrentProcess,7

        udi_table   UDIDestroyProcess,8

        udi_table   UDIInitializeProcess,9

        udi_table   UDIRead,10

        udi_table   UDIWrite,11

        udi_table   UDICopy,12

        udi_table   UDIExecute,13

        udi_table   UDIStep,14

        udi_table   UDIStop,15

        udi_table   UDIWait,16

        udi_table   UDISetBreakpoint,17

        udi_table   UDIQueryBreakpoint,18

        udi_table   UDIClearBreakpoint,19

        udi_table   UDIGetStdout,20

        udi_table   UDIGetStderr,21

        udi_table   UDIPutStdin,22

        udi_table   UDIStdinMode,23

        udi_table   UDIPutTrans,24

        udi_table   UDIGetTrans,25

        udi_table   UDITransMode,26

rmcode  segment

        ASSUME  nothing, CS:rmcode      ; all we know is that CS=rmcode

        ; Common real mode stub code

        ; bl is an index indicating which UDI function was called

        ; we need to switch to protected mode (ebx will be passed thru unchanged)

rm_common  PROC FAR             ; UDI always called as far (real mode)

        push    ds              ; save ds

        push    bp              ; and save bp

        push    si              ; and si, di

        push    di

                                ; note: if anything else gets pushed here, you must

                                ; change the MSCPARAMS macro in dos386c.c

        push    cs

        pop     ds              ; set ds = cs

        ASSUME ds:dgroup

        ; to switch to protected mode, we push a dword ptr to a block which

        ; contains the protected mode segment registers to use

        ; and we push the 48-bit protected address of pmstub

        ; then we call the call_prot routine which was returned by dx_rmlink_get

        push    cs              ; segment of seg reg block

        lea     ax, segregblock

        push    ax              ; offset of seg reg block

        push    code_selector

        lea     eax, pmstub

        push    eax

        call    call_prot

        add     sp, 10          ; unpop all things we pushed

                                ; ax return code from prot mode passed thru

        pop     di              ; unpop di,si saved earlier

        pop     si

        pop     bp              ; unpop the BP we saved earlier

        pop     ds              ; unpop the DS we saved earlier

        ret                     ; will do a FAR (real mode) ret to DFE

rm_common  ENDP

rmcode  ends

pmcode segment

pmstub proc far

        ; at this point ss:sp -> far return (DF) back to dos-extender

        ;                  sp+6  a word of 0

        ;                 sp+8   the pushed DS (of rmstub)

        ;                 sp+10  parameters

        ; we pop the far return and save it away

        ; then we call the real application procedure (the params still on stack)

        ASSUME CS:pmcode, DS:dgroup

        ; first let's switch ss:esp so that ss = ds

        ; (it will still point to the same physical memory location)

        ; (we'll save the old ss:esp on the stack in case they're needed)

        mov     dx, ss

        mov     ecx, esp

        ; at this point, ecx contains the physical 32-bit address of sp

        ; (selector 60h's offset mapped directly to 1meg physical memory)

        mov     eax, conventional_memory

        cmp     eax, 0          ; if conventional memory not mapped take other path

        je      short conv_mem_unmapped

                ; This is the code that is not DPMI compatible

                ; we add the ofst of beggining of conventional memory to esp

                ; to make it SS_DATA relative and then use data_selector as the SS

                ; thus no stack switch is necessary, we just remap the old stack

        add     eax, ecx        ; this adds esp to conventional_memory

        mov     ss, data_selector

        mov     esp, eax

        jmp     short got_ss_sp

                ; now ss:esp points to same place as before but using different segment

conv_mem_unmapped:

                ; This code is DPMI compatible

                ; we actually switch to a new stack that is in the TIPs DS

                ; the number and size of these stacks was allocated at startup time.

        lea     eax, stack_table

chk_stack:

        cmp     dword ptr [eax], 0

        je      short no_stack  ; stack pointer of 0 means end of table

        mov     esi, dword ptr [eax]    ; get stack pointer

        cmp     dword ptr [esi+4], 0    ; is it marked free?

        je      short take_stack

        add     eax, 4          ; to next stack entry in table

        jmp     chk_stack

no_stack:

        mov     eax, 25         ; IPC Limitation error

        ret

take_stack:

        mov     dword ptr [esi+4], 0ffffffffh   ; mark stack in use

        mov     ss, data_selector

        mov     esp, esi        ; get stack pointer from table

                                ; now we have ss = ds, so we can go to C level.

got_ss_sp:

        ; push the old ss:esp on the stack

        push    edx             ; old ss (need to push as full 32-bit for C convention)

        push    ecx             ; old esp

        ; bl still contains the UDIProcedure Index (which was set up by the rm stub)

        ; use this to get to the correct dos386glue_table routine

        xor     bh, bh

        shl     bx,1            ; *4 for indexing into DD array

        shl     bx,1

        call    dos386glue_table[bx]

        ; on return, we just need to restore the old ss:esp

        pop     ecx

        pop     edx

        cmp     conventional_memory, 0  ; if we had switched stacks

        jne     short no_stack_clear

        mov     dword ptr [esp+4], 0    ; clear the stack in use indicator

no_stack_clear:

                                ; this code is identical whether we switched stacks or not

                                ; we just restore the old ss:sp and return

        mov     ss, dx

        mov     esp, ecx

                                ; the stack should look as it did when we entered

                                ; so we just do a far ret

        ret

pmstub endp

        public  GetCS

GetCS   PROC NEAR

        mov     ax, cs

        ret

GetCS   ENDP

        public  GetDS

GetDS   PROC NEAR

        mov     ax, ds

        ret

GetDS   ENDP

        public  _exp_return

        extrn   _top:dword

_exp_return PROC FAR

        ; set the stack pointer back to its initial state as left by dfe

        ; (leave the ss unchanged)

        ; then do a far ret which will get us back to the dfe.

        ; (which will then restore its own stack).

        mov     ebp, esp

        mov     eax, [ebp+4]    ; errcode

        mov     ecx, _top

        add     ecx, 2

        mov     esp, ecx

        ret

_exp_return ENDP

pmcode ends

rmdata   segment

;

; Symbol marking end of real mode code & data,

; used at link time to specify the real mode

; code & data size

;

        public  end_real

end_real label  byte

rmdata   ends

ENDIF   ; end of DOS386 conditional code

        END